About Respirators - LaFrance Equipment Air... · 2014-01-15 · 10097887 Storage poly bag 468730...
Transcript of About Respirators - LaFrance Equipment Air... · 2014-01-15 · 10097887 Storage poly bag 468730...
Air-Purifying Respirators/ Industrial
4 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
About Respirators
Types of Respirators Respirators fall under two classifications: air-purifying and air-supplied.
Air-purifying respirators are used against particulates, gases, and vapors.These are categorized as negative-pressure respirators that use chemicalcartridges and/or filters; gas masks; and positive-pressure units such aspowered air-purifying respirators (PAPRs). Air-supplied devices rely on aprimary air source to deliver a steady flow of respirable air to the user’sfacepiece. These consist of Self-Contained Breathing Apparatus (SCBA) and air-line devices.
MSA Air-Purifying Respirators (APRs) range from low-maintenance halfmask facepieces with cartridges and/or filters to the more complex PAPRs with full- facepieces, or hoods.
• APRs for particulates use filters to capture dusts,mists, and fumes. Filters do not protect against gases or vapors, and generally become less effective as particles accumulate on the filter and plug spacesbetween the fibers. Filtering APRs require filter replacement when the user finds it difficult to breathe through them.
• Gas and vapor APRs employ chemical cartridges or canisters to removehazardous gases or vapors from the air. They do not protect againstairborne particles. Made to protect against specific gases or vapors, theyprovide protection only as long as the cartridge’s absorbing capacity is not depleted.
The service life of a chemical cartridge depends upon many factors and can be estimated in various ways. Cartridges and canisters require an end-of-service-life indicator (ESLI) or a change schedule, based onobjective information or data that will ensure that canisters and cartridgesare changed before the end of their useful life. You can access the MSACartridge Life Calculator on our website (MSAnet.com). Click Resources,then Tools, then Cartridge Life Calculator.• Combination APRs, fitted with both particulate filters and gas/vapor
cartridges, are worn in atmospheres that contain hazards of both particulates and gases.
Supplied-Air Respirators (SARs), comprise air-line respirators,SCBA, and combination (supplied-air) respirators.
• Air-Line Respirators are used for extended periods in non-IDLHatmospheres. They use an air-line hose to deliver clean breathing air froma stationary source of compressed air for prolonged periods of time.Although comparatively lightweight, air-line respirators can limit users’mobility because of the air-line hose that must be attached.
• Self-Contained Breathing Apparatus (SCBA) have an open-circuit designthat provides air rated for 30 to 60 minutes. They consist of a wearable,clean-air supply and a tight-fitting facepiece, and are used for shortduration entrance or escape from atmospheres that are or may be IDLH.They offer relatively unrestricted movement.
• Combination SARs are air-line devices used for extended work periods in atmospheres that are or may be IDLH. They have an auxiliary self-contained air cylinder that can be used if the primary air supply fails.The air cylinder can also be used for entry into or escape from IDLHatmospheres, such as confined spaces.
Respirator SelectionAll respirators in use must be NIOSH-approved (NIOSH 42 CFR Part 84).Selecting respirators entails knowing what level of respiratory protectionemployees need, as well as which size respirator is right for any face andfacial contours.
Respiratory protective devices vary in design, application, and protectivecapability. Thus, the user must assess the inhalation hazard and understand the specific use limitations of available equipment to assureproper selection.
If your calculation shows that exposure concentrations exceedrecommended limits and engineering/administrative controls do not reduce exposure below the permissible limit, tailor your respiratoryprotection program to your specific conditions based on:
• Toxicity (TLV or TWA) • Maximum Expected
Concentration • Oxygen level • IDLH concentration • Warning properties
(adequate or not)
• Sorbent limitations • Facepiece fit • Mobility requirements • Type of use (routine, escape,
or emergency entry) • OSHA-assigned protection
factor of respirator
5Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Half-Mask Respirators New!
The innovative Advantage 400 Respirator, the latest addition to MSA’s Advantage Respirator family, offers users exceptional comfort and sophisticated design. The Advantage 400 Respiratorraises the bar for ease of use, as users can quickly adjust the mask according to their individual needs.
Top 5 reasons why you should purchase the Advantage 400
1. Patent-pending one-piece UniBond over-mold facepiece offers stability, comfort, andsuperior fit. The intelligent design eliminates multiple leak paths and with only three majorcomponents, the Advantage 400 significantly reduces the cost of ownership.
2. AnthroCurve™ II face-seal adapts perfectly to multi-ethnic head sizes and facial contours. The facepiece design is based upon the new proposed NIOSH fit test panel and provides users inmany global regions with excellent fit, and superior comfort.
3. Patent-pending yoke and harness design enables quick and easy switch between lock-downand drop-down modes. Drop-down mode allows user to remove facepiece and rest it safelyagainst the chest while maintaining use of head protection. Lock-down harness mode allows the user to lock in a personal fit; respirator can be donned without further adjustments.
4. Low-profile design integrates extremely well with other personal protective equipment(PPE), such as hardhats, eyewear, goggles, and faceshields. Unique, one-piece ComforTopheadband and harness assembly eliminates pressure points when head protection is worn.
5. Comfort and adjustability with our form-fitting neck buckles and wide straps that eliminatediscomfort around the neck, and the adjustable crown strap which adapts to different head sizes.
Completely Latex-Free!
Advantage® 400 Series Half-Mask Respirator
Advantage 400 Series RespiratorDescription Small Medium Large
Advantage 420 Assembly (includes facepiece, head cradle, elastic straps, buckle set, yoke with lever, two (2) inhalation valves,one (1) exhalation valve)
10102182 10102183 10102184
See page 14 for bayonet-style filters and cartridges and page 15 for flexible pad-style filters.See page 15 for threaded filters and cartridges.
Advantage 420 Respirator Spare Parts and Accessories
10097807 Harness Assembly with Buckles includes head cradle, elastic straps, and buckle set)
10097883 Maintenance Valve Set includes one (1) exhalation valve and two (2) inhalation valves)
10097886 Advantage 420 Maintenance Kit (includes harness assembly with buckles, one (1) exhalation valve, and two (2) inhalation valves)
10097810 Yoke with lever
10097881 Lever, qty. 5
10097888 Inhalation valve, qty. 10
10097891 Exhalation valve, qty. 10
10097884 Buckle set, qty. 5
10097887 Storage poly bag
468730 Vinyl storage bag with belt loops
809999 Advantage Adapter, pkg of 2, for threaded cartridges
10009971 MSA Confidence Plus Germicidal Cleaner (32 oz.)
697383 Cleaning Towelettes (individually wrapped), pk 100
697444 Bitrex Qualitative Fit-Test Kit
10056424 Advantage Quantitative Fit Test Adapter
10097899 Instructional CD
3-Step Donning Process Flexible, patent-pending, one-piece Easy-Don Head Harnessassembly simplifies donning and doffing.
Place cradle on head
Place facepiece into position and lock down
Attach neck buckle
1
2
3
Air-Purifying Respirators/ Industrial
6 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Half-Mask Respirators
Evolutionary AnthroCurveII Sealing Surface Face SealCompared to other half-mask respirators available on the market today, the Advantage 420 isdesigned to fit a much broader range of users who have unique facial features and dimensions.Through years of research and facial measurements of different ethnicities, the National Instituteof Occupational Safety and Health (NIOSH) has developed a new fit test panel shown here. MSA is proud to say that the Advantage 400 face seal design is based upon this panel.
What it means to you is a higher degree of protection for a larger number of workers.
33 4 5
6 7 8
1 2
9 10
3
Face Width (mm)
Face
Len
gth
(mm
)
NIOSH #1
6
4
1 25
9
7
10
8
138.5
134.5 146.5 158.5
120.5 132.5 144.5
128.5
118.5
108.5
98.5
Features Benefits
Sim
plic
ity
Only three major components Reduced cost of ownership (fewer parts, ease of maintenance)
Patent-pending unique harness assembly Three simple donning steps
User-friendly drop-down harness option Allows user to remove facepiece and rest it safely against chest while maintaining use of head protection
Personal fit lock-down harness option Provides user with option of locking in a size; respirator can be reused without further adjustments
Com
fort
Curved neck buckles Adds greater comfort and reduces neck abrasion
Smooth design ComforTop headband Eliminates pressure points on head when head protection is worn
Multi-ethnic faceseal based on proposed NIOSH test panel Fits a broad range of facial shapes globally
Wide comfortable straps Minimizes twisting and retains shape after multiple washings
Chin cup with built-in moisture release Reduces slippage of facepiece in hot humid conditions
Latex-free Eliminates latex-related allergic reaction
Safe
ty
UniBond one-piece facepiece made of soft over-molded LIM silicone and rigid nylon
Eliminates multiple leak points and offers excellent stability on user’s face
Textured inner facepiece seal Maintains secure facepiece fit and reduces slippage
No loose or dangling straps after donning Eliminates interference and provides greater visibility
Indirect exhalation valve Provides downward path of exhaled humid air; reduces fogging on faceshield lens
Flex
ibili
ty
Innovative yoke and harness design Enables quick and easy switch between lock-down and drop-down options
Low-profile design Integrates extremely well with other PPE, such as eyewear, goggles, head protection, and faceshields
Adjustable ComforTop headband and three facepiece sizes Provides precise adaptation to different head sizes and facial contours
NIOSH-certified for use with both plastic Advantage bayonet and metal Comfo threaded cartridges
Allows respirator customization to meet user preferences
7Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Half-Mask Respirators
Advantage 200 LS RespiratorThe Advantage 200 LS Respirator's Lighter and Softer facepiece is made from a clear blue formulation of thermoplastic rubber to give workers more comfortand stability than ever.
Extensive anthropometric research led to the Advantage Respirator's uniquedesign. MSA's engineers examined facial form data of over 8,000 people and,with CAD technology, developed the AnthroCurve™ Sealing Surface, whichinstantly conforms to each wearer's unique facial characteristics.
The unmatched fit and comfort start with a soft, pliable combination of rubberand plastic that provide a virtually customized fit. These are key components in the patented MultiFlex® System that equalizes pressure on the faceseal area,while delivering exceptional stability, so the respirator will not collapse during wear.
All Advantage Respirators are NIOSH certified.
Advantage 200 LS (Facepieces only)Description 2-Piece Neckstrap Single Neckstrap
Advantage 200 LS, small 815696 815448
Advantage 200 LS, medium 815692 815444
Advantage 200 LS, large 815700 815452
Advantage 200 LS Facepiece with CartridgeDescription OV-N95 Cartridge Multigas R95 Cartridge
Advantage 200 LS, small 816943 816701
Advantage 200 LS, medium 816939 816697
Advantage 200 LS, large 816947 816705
See page 14 for bayonet-style filters and cartridges and page 15 for flexible pad-style filters.
Advantage 200 LS with combination chemical cartridges
Advantage 200LS Respiratorwith Flexi-Filter Pads
For more information,see Bulletin 1012-10.
Comfo Classic® RespiratorThe Comfo Classic Respirator features SoftFeel® facepiece material, which is an MSA-exclusive formulation thatimproves pliability and softness. Like earlier Comfo respirator models, the Comfo Classic Respirator features a uniqueface seal design that gives wearers an exceptional fit. NIOSH certified.
Comfo Elite® RespiratorThe Comfo Elite Respirator provides pro tec tion against a variety of respiratory haz ards. The Comfo Elite Respirator,available in black silicone, has a unique sealing surface designed to reduce facepiece slippage. The Comfo EliteRespirator comes in small, me di um, and large sizes. NIOSH-certified.
Comfo Classic Facepieces Material Color Small Medium Large
SoftFeel Hycar Black 808075 808074 808076
SoftFeel silicone Black 808072 808071 808073
Comfo Elite FacepiecesMaterial Color Small Medium Large
Silicone Black 490492 490491 490493
See page 15 for threaded filters and cartridges.
See page 15 for threaded filters and cartridges.
Advantage 200 LS with P100 particulate filter
Air-Purifying Respirators/ Industrial
8 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Full-Facepiece Respirators
Advantage® 3000 Series RespiratorsThe Advantage 3000 Full-Face Respirator incorporates MSA’s global engineering expertise and is NIOSH and EN certified.
The respirator features a wraparound lens combined with a soft,pliable silicone facepiece that provides a total solution to your air-purifying respirator needs.
Its fit technology is based on the proven faceseal of the Ultra EliteFacepiece, which was based on facial measurements from more than8,000 people.
For the utmost in convenience, the Advantage 3200 uses the same cartridges and filters as the Advantage 200 LS Respirator.
The Advantage 3000 Respirator enhances worker performancethrough a new design that allows even lower breathing resistanceand includes a standard nosecup that reduces fogging in lowtemperatures or high humidity conditions.
In addition, the facepiece lens has a scratch resistant coating and has been engineered to be optically correct,giving you superior visibility and peripheral vision. The Advantage 3000 Respirator meets all performancerequirements of ANSI Z87.1.2009 (protective eye and face protection).
Donning the mask is made easier with pre-adjustable rubber straps. With the Advantage 3000 Respirator, youcan set the position of the upper straps to receive a consistent fit, time after time. In addition, the preset upperstraps prevent uncomfortable snags during donning and doffing, and also provide a tighter, more secure seal.Wearers also can choose the new European-style Advantage harness, which dons like a catcher’s mask.
Advantage 3200 Respirator with rubber harnessand chemical cartridges
For more information, see Bulletin 1012-10.
Advantage 3200 Facepieces (Twin Port)Description Small Medium Large
Advantage 3200 Twin Port Respirator, w/rubber harness 10028996 10028995 10028997
Advantage 3200 Twin Port Respirator, w/Advantage European-style harness 10031340 10031309 10031341
Advantage 3200 Respiratorwith European-style harness
Advantage 3100 Respiratorwith rubber harness
Advantage 3100 Facepieces (Single Port)Description Small Medium Large
Advantage 3100 Single Port Respirator, w/rubber harness 10028999 10028998 10029000
Advantage 3100 Single Port Respirator, w/Advantage European-style harness 10031343 10031342 10031344
See page 14 for bayonet-style filters and cartridges and page 15 for flexible pad-style filters.
9Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Full-Facepiece Respirators
Advantage® 4000 RespiratorThe new Advantage 4200 Twin Port Full-Face Respirator raises theperformance of industrial full-facepiece respirators to a new level. Based on the Advantage 3000 Facepiece, the respirator features awraparound lens combined with a soft, pliable Hycar or siliconefacepiece that provides a total solution to your air-purifying needs.
Its fit technology is based on the proven face seal of the Ultra EliteFacepiece. For the utmost in convenience, the Advantage 4200 uses the same cartridges and filters as the Advantage 200 LS and Advantage 3200 Respirator.
In addition, the facepiece lens has scratch-resistant coating and has been engineered to be optically correct, giving you superior visibility and peripheral vision. The Advantage 4200 Respirator alsomeets the performance requirements of ANSI Z87.1.2009.
The Advantage 4200 Respirator enhances worker performance through a new design that allows low breathing resistance and includes astandard nosecup that reduces fogging in low temperatures or high humidity conditions.
Options include spectacle kits for corrective lenses, cover lens and welders adapter.
Donning the mask is made easier with a comfortable net-type harness with a four-point adjustable suspension.Wearers also can choose pre-adjustable rubber straps.
All Advantage 4200 Respirators are NIOSH certified.
Advantage 4200 Facepieces (Twin Port)Description Small Medium Large
Advantage 4200 Twin Port Respirator, w/net head harness, Hycar 10083785 10083781 10083789
Advantage 4200 Twin Port Respirator, w/rubber head harness, Hycar 10083787 10083783 10083791
Advantage 4200 Twin Port Respirator, w/net head harness, silicone 10083784 10083760 10083788
Advantage 4200 Twin Port Respirator, w/rubber head harness, silicone 10083786 10083782 10083790
Advantage 4200 Respirator with combination cartridges
Advantage 4200 Respirator with Welder’s Adapter,Filter Plate and Flexi-Filter Pads
net head harness
rubber head harness
See page 14 for bayonet-style filters and cartridges and page 15 for flexible pad-style filters.
Welder’s AccessoriesClip-On Welder’s Adapter for Advantage 4200 Twin Port Facepiece; with cover lens, less filter plate 10077063
Auto-Change Electronic Welding Lens 10068601
Advantage 4100 Facepieces (Single Port)Description Small Medium Large
Advantage 4100 Twin Port Respirator, w/net head harness, Hycar 10083797 10083793 10083801
Advantage 4100 Twin Port Respirator, w/rubber head harness, Hycar 10083799 10083795 10083803
Advantage 4100 Twin Port Respirator, w/net head harness, silicone 10083796 10083792 10083800
Advantage 4100 Twin Port Respirator, w/rubber head harness, silicone 10083798 10083794 10083802
Note: The 4100 can be converted for use with filter cartridges by adding the Twin-Cartridge Adapter Assembly P/N 10065328.
Advantage 4000 Respirator with net head harness andGMA/OV cartridges
Air-Purifying Respirators/ Industrial
10 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Full-Facepiece Respirators
Advantage® 1000 RespiratorsThe Advantage 1000 Full-Face Respirator features a wraparound flexible lens that offers excellent fit and comfort with increasedvision. It weighs 40% less than con ven tion al full-face respirators and uses the same car tridg es as the Advantage Family Res pi ra -tors. The Advantage 1000 Respirator is constructed of super-soft Hycar rubber that provides the feel and comfort of silicone buthas better permeation resistance. The facepiece, which is available in three sizes, has a unique inturned lip seal that provides anexceptional seal against a wide range of facial contours. he Advantage 1000 facepiece also features a distinctive, flexibleurethane lens that is integrally bonded to the facepiece, eliminating the need for rigid lens retainers that can cause unwantedpressure points. NIOSH certified.
Standard equipment includes a speaking diaphragm, for clear, short-range communications, and a nosecup, to reduce lensfogging in low temperatures or high-humidity conditions.
Advantage 1000 FacepiecesColor Small Medium Large
Black, with speaking diaphragm and nosecup 805414 805408 805420
See page 14 for bayonet-style filters and cartridges and page 15 for flexible pad-style filters.
Advantage 1000 Respiratorwith P100 particulate filter
Ultra-Twin® RespiratorsThe Ultra-Twin Full-Facepiece Respirator has an inturned lip around the edge for a secure, comfortable seal against the face. A large chin cup makes it easy to position. Five suspension headstraps and roller buckles hold the facepiece in place whileminimizing hair en tan gle ment. The wide poly car bon ate lens is coated to resist scratching and chemical attack. The lens is heldin place by a two-piece lens ring which is color-coded to indicate the size of the facepiece. Uses the full line of Comfo Car tridg esand Filters.
Standard equipment includes a speaking diaphragm for clear, short-range communications and a nosecup, to reduce lensfogging in low temperatures or high-humidity conditions. NIOSH certified.
Ultra-Twin Facepieces Material Color Small Medium Large
Hycar Black 471298 471286 471310
Silicone Black 480263 480259 480267
See page 15 for threaded filters and cartridges. See page 17 for accessories and fit test kits.
The demand version of the Ultra Elite Facepiece fromMSA can be used as a twin-cartridge air-purifyingrespirator for full-face respiratory protection. Theunique lens design provides a high level of pe riph er aland down ward vision. It is available in three sizes andhas large ad just ment tabs for easy donning anddoffing. Choose one of two facepiece materials—SoftFeel® Hycar rubber or silicone—to enhance wearercomfort. A speaking di a phragm in front of the wearer’smouth improves communication so that speech is not blocked. A nosecup reduces lens fogging in lowtemperatures or high-humidity conditions. NIOSH certified.
Ultra Elite Facepiece less Twin-Cartridge Adapter
Material Color Small Medium Large
SoftFeel Hycar rubber Black 493064 493020 493108
SoftFeel silicone Black 493072 493028 493116
See page 15 for threaded filters and cartridges. See page 17 for accessories, including twin-cartridge adapter, and fit test kits.
Ultravue FacepiecesMaterial Color Small Medium Large
Hycar Black 471218 457126 471230
Silicone Black 480251 480247 480255
Ultravue® RespiratorsThe Ultravue Respirator is the single-port version of the Ultra-Twin (above) and incorporates the same design frame. It can beused as a twin-cartridge facepiece when the twin-cartridge adapter is used.
See page 17 for accessories, including twin-cartridge adapter, and fit test kits.
Ultra Elite Facepiece with Twin-Cartridge Adapter
Material Color Small Medium Large
SoftFeel silicone Black 10016755 10016756 10016757
Note: Ultra Elite Facepieces must be fitted with a Twin-Cartridge Adapter to be used as a twin-cartridge respirator.
Ultra Elite® Twin-Cartridge Respirators
Ultra Elite Respirator with cartridgeadapter and P100 particulate filter
11Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Powered Air-Purifying Respirators (PAPRs)
OptimAir® Mask-Mounted PAPR with Type HE OptiFilter® XL FilterThe OptimAir Mask-Mounted Powered Air-Purifying Respirator (PAPR) is designed for abatement,nuclear, lead and other hazardous particulate environments. The PAPR filters particulates fromambient air and provides a constant flow of respirable air to the Advantage 3100, 4100, Ultravue orUltra Elite Facepiece. The mask-mounted motor/blower with HEPA filter has a low profile designthat enhances user maneuverability and simplifies decontamination.
The PAPR includes a small, lightweight, water-resistant nickel metal hydride (NiMH) battery packthat will operate for eight hours of continuous use. Weighing only 12.5 oz., it measures only 3"x 5"x1". The low-profile unit fits close to the wearer’s body. The sealed battery pack is water-resistant foreasy shower decontamination. Another advantage: NiMH batteries do not have the “memory effect”associated with NiCad batteries. The standard Dual-Rate Battery Charger will recharge a fullydischarged battery in less than three hours. Metal connectors on cable ends provide a durable andsecure fit to the battery and blower housing. NIOSH approved as mask-mounted PAPR and alsoapproved as a negative-pressure APR for egress.
NOTE: the Mask-Mounted PAPR replaces the MM2K PAPR.
OptimAir Mask-Mounted PAPR Kit (less facepiece)Upgrade Kit includes: motor/blower module, NiMH battery, dual-rate battery charger, cable,one Type HE OptiFilter Cartridge, and belt. Use your present facepiece or order facepieceseparately from ordering chart below.
OptimAir Mask-Mounted Upgrade Kit 10095166
Replacement FacepiecesAdvantage 3100
Facepiece Small Medium Large
with rubber head harness 10028999 10028998 10029000
with Advantage head harness 10031343 10031342 10031344
Advantage 4100 PAPR*
Material Small Medium Large
Black Silicone, with net head harness 10083796 10083792 10083800
Black Hycar, with net head harness 10083797 10083793 10083801
OptiFilter Cartridges for OptimAir Mask-Mounted PAPR
MSA Purifying ElementPurifying Protection Code
ColorCode
No. inBox Part No.
OptiFilter XL, Type HE HE 20 10042346
OptiFilter XL, Type HE HE 6 496081
For information on the MSA OptimAir MM2K PAPR, see bulletin 1010-12-MC.
OptimAir Mask-MountedPAPR Assembly with Advantage 4100 Facepiece
Complete OptimAir Mask-Mounted PAPR Assemblies(with facepiece)All assemblies include: motor/blower, NiMH battery, dual-rate battery charger, cable, oneType HE OptiFilter XL Car tridge, belt, and choice of Advantage 3100 or 4000 Facepiece.
Advantage 3100 PAPR
Head Harness Small Medium Large
with rubber head harness 10095181 10095182 10095183
with Advantage head harness 10095184 10095185 10095186
Advantage 4100 PAPR
Material Small Medium Large
Black Silicone, with rubber harness 10095193 10095189 10095197
Black Hycar, with rubber harness 10095194 10095190 10095198
Black Silicone, with cloth harness 10095191 10095187 10095195
Black Hycar, with cloth harness 10095192 10095188 10095196
Parts and Accessories10095162 Battery pack assembly, packaged
10095163 Motor/blower assembly, without cable, packaged
10095164 Cable assembly, packaged
10095165 Charger, packaged
487995 Flow check device
491046 Adapter for flow check device
*Also requires RD40 Adapter P/N 10065330OptimAir Mask-Mounted PAPR with Advantage 3100 Facepiece
Available
Nov. 2009
Air-Purifying Respirators/ Industrial
12 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Powered Air-Purifying Respirators (PAPRs)
OptimAir® TL PAPRThe OptimAir TL PAPR is NIOSH-certified with loose-fitting hoods and a variety of full facepiecesto protect against particulates, toxic gases andvapors, or a combination. “Smart” features set flowrates automatically through built-in sensors. Unitoffers audible and visual alarms for added workersafety. Audible alarms travel up the breathing tubeclose to the user’s ear.
MSA's OptimAir TL PAPR incorporates a sleek, low-profile design for user comfort never beforeoffered in a PAPR. All components including themotor blower, cartridges and battery are packagedin a single hip-hugging housing. Improved motorblower electronics allow for optimum air flow andfilter resistance while the compact and ergonomicbattery pack affords lightweight comfort and fit.Flow control sensors are activated by insertion ofthe cartridges and breathing hose to the blowerhousing. The unit automatically adjusts for altitudevia an internal pressure switch.
Superior design features permit fast, accuratechangeout of cartridges, hoods and batteries. Slim, curved PAPR housing helps to minimizefatigue and permits work in tight confined areas.OptimAir TL PAPR kits include motor blower, smart charger, battery, decon belt, and hose.
NIOSH-Approved
Available with variety of full facepieces and hood materials, styles and configurationsincluding DuPont Tychem SL and QC with single and double bib. A choice of hoseconnection is also available. Unit has an APF of 1,000 (Assigned Protection Factor) when used with hood or facepiece.
Smart Design Features• Crush proof breathing tube• Automatic setting of flow rates• Audible and visual alarms for low flow
indication and low battery voltage• Less bulk and better weight distribution
improves worker efficiency• Every cartridge has its own sealing gasket
Cartridges and Accessory Options• P100• Acid gas/organic vapor plus P100• Acid gas/ammonia/formaldehyde plus 100• Comfort waist belt• Extended life battery• Shoulder strap
OptimAir TL Kitswith standard battery
with Long Life battery
for Facepieces 10081114 10081115
for Hoods 10081116 10081117
for Optivizor 10099274 10099275
FacepiecesAdvantage 3100 Facepieces (Single Port)Silicone Small Medium Large
Rubber head harness 10028999 10028998 10029000
Advantage head harness 10031343 10031342 10031344
Advantage 4100 Facepieces* (Single Port)Silicone Small Medium Large
Net head harness 10083796 10083792 10083800
Rubber head harness 10083798 10083794 10083802
Hycar Small Medium Large
Net head harness 10083797 10083793 10083801
Rubber head harness 10083799 10083795 10083803
Ultra Elite FacepiecesSilicone Small Medium Large
Rubber head harness 493072 493028 493116
Hycar Small Medium Large
Rubber head harness 493064 493020 493108
Facepiece Accessories10065330 RD-40 Inlet assembly, required for all Advantage 4100 facepieces
10049630 Hose for facepiece
10087129 Flow check device for facepiece only
White Hood for OptimAir TL PAPR
OptiVizor® for OptimAir TL PAPR
*Also requires RD40 Adapter P/N 10065330
NOTE: cartridges and other accessories on next page.
13Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Powered Air-Purifying Respirators (PAPRs)
Cartridges10080455 P100 cartridge (6 pack)
10080454 OV/AG P100 cartridge (6 pack)
10080456 AG, AM, FM, P100 cartridge (6-pack)
10068152 Spark Guard cartridge cover (single unit) (2 req.)
Battery and Charger10076108 Standard battery for OptimAir TL PAPR
10076110 Standard battery charger for OptimAir TL PAPR
10076109 Long-life battery for OptimAir TL PAPR
10076107 Long-life battery charger for OptimAir TL PAPR
Decon Accessories10075799 Decon cover for OptimAir TL PAPR, 5-pack, natural
10087152 Decon cover for OptimAir TL PAPR, 5-pack, yellow
10091958 Decon cover for OptimAir TL PAPR, urethane, .12 ml thick, 5-pack, yellow
10078201 Decon belt (backpack buckle)
10074725 Decon belt (cam lock buckle)
Miscellaneous Accessories10085084 “O” Ring replacement, hose hood, 10-pack
10049623 Comfort belt
10081414 Cartridge receptacle cover
10059112 Shoulder strap for OptimAir TL
10088150 Blower untit only
Hood Accessories10083843 Hose clamp for standard hood, 6-pack
10049631 Hood hose
10078469 Suspension only, for Tyvek hood
10083618 Sweatband for hood suspension, 10-pack
10082441 Cover lens for hood (pack of 10)
10087130 Flow check device for hood only
10089665 Fastener kit, hood to V-Gard helmet
OptiVizor® and Accessories10049638 OptiVizor
10082281 OptiVizor hose, extended length (can also be used with hoods)
10058141 Replacement lens for OptiVizor, clear
OptimAir TL Hoods
Tychem® QC (polyethylene-coated Tyvek) Tychem® SL (saranex-coated Tyvek)
Single Bib
4-pack, threaded connector, with suspension 10083329 10083381
4-pack, threaded connector, less suspension 10083387 10083389
20-pack, threaded connector, less suspension 10095739 (white) 10095748 (yellow) 10095741
4-pack, standard, with suspension 10083383 10083385
4-pack, standard, less suspension 10083391 10083393
20-pack, standard, less suspension 10095740 10095742
Double Bib
4-pack, threaded connector, with suspension 10083330 10083382
4-pack, threaded connector, less suspension 10083388 10083390
20-pack, threaded connector, less suspension 10095743 (white) 10095749 (yellow) 10095745
4-pack, standard, with suspension 10083384 10083386
4-pack, standard, less suspension 10083392 10083394
20-pack, standard, less suspension 10095744 10095746
Note: all hoods are white except where noted.
Hood Suspensions10103864 20-pack
10078469 1 each
Hoods for use with the OptimAir 6A PAPR10095747 Single-bib, 20-pack, 6A connector, with suspension
10084820 Single-bib, 4-pack, 6A connector, with suspension
Air-Purifying Respirators/ Industrial
14 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Bayonet-Style Respirator Cartridges Acid Gases
The Advantage line of particulate, chemical and combination cartridgesis NIOSH-certified (to 42 CFR, Part 84) and provides lightweight, low-profile performance. Cartridges fit 200 LS Half-Mask, 1000, 3000and 4000 Series Full-Facepiece Advantage Respirators.
Org
anic
Vap
or
Chlo
rine
Sulfu
r Dio
xide
Chlo
rine
Dio
xide
Hyd
roge
n Ch
lo-
ride
Hyd
roge
n Su
l-fid
e*
Amm
onia
Met
hyla
min
e
Form
alde
hyde
Hyd
roge
n Fl
uo-
ride
Mer
cury
Vap
or Filter Type & EfficiencySee Definitionsbelow
MSA CartridgeDescription
Re-OrderPart Number
ColorCoding OV CL SD CD HC HS* AM MA FM HF MV P100 R95 N95
See Notesbelow
GMA 815355 2,3
GMA with N95 Prefilter 815355 with 815394 or 816357 2,3
GMA with R95 Prefilter 815355 with 815397 2,3
GMA P100 815362 2,3,4
GMB 815356 2
GMB with N95 Prefilter 815356 with 815394 or 816357 2
GMB with R95 Prefilter 815356 with 815397 2
GMB P100 815363 2,4
GMC 815357 2,3
GMC with N95 Prefilter 815357 with 815394 or 816357 2,3
GMC with R95 Prefilter 815357 with 815967 2,3
GMC P100 815364 2,3,4
GMD 815358 2,3
GMD with N95 Prefilter 815358 with 815394 or 816357 2,3
GMD with R95 Prefilter 815358 with 815397 2,3
GMD P100 815365 2,3,4
GME 815359 2,3
GME with N95 Prefilter 815359 with 815394 or 816357 2,3
GME with R95 Prefilter 815359 with 815397 2,3
GME P100 815366 2,3,4
GMI P100** 815641 2,4
Mersorb 815361 2,4
Mersorb with N95 Prefilter 815361 with 815394 or 816357 2,4
Mersorb with R95 Prefilter 815361 with 815397 2,4
Mersorb P100 815368 2,4
Low-Profile P100 815369 1,4
N95 Snap-On Prefilterand Cover
815394 Pack of 10816357 Box of 50815392 Reusable Snap-On Cover
2 in a PackageAn appropriate cartridge change-out schedule must be developed by a qualified professional, unless thecartridge/canister utilizes an end-of-service-life indicator. The change-out schedule must take into account all factorsthat may influence respiratory protection including specific work practices and other conditions unique to the worker’senvironment. If using against substances having poor warning properties, there is no secondary means of knowingwhen to replace the cartridges/canister. In such cases, take appropriate additional precautions to preventoverexposure, which may include a more conservative change-out schedule or using an air-supplied respirator or SCBA.Failure to follow this warning can result in serious personal injury or death. As a reference, below is a partial list ofsubstances having poor warning properties:
Acrolein Hydrogen cyanide Nitric acid Phosphorus trichlorideAniline Hydrogen selenide Nitro compounds StibineArsine Methanol Nitrogen oxides Sulfur chlorideBromine Methyl bromide Nitroglycerin Urethane or other diisocyanate-Carbon monoxide Methyl chloride Nitromethane containing paints
Diisocyanates Methylene chloride Phosgene Vinyl chlorideDimethyl sulfate Nickel carbonyl Phosphine
R95 Snap-On Prefilterand Cover
815397 Box of 20815401 Reusable Snap-On Cover
2 in a Package
DefinitionsN95-Par tic u late Filter (95% filter efficiency level) effective against particulate aerosols free of oil; time use restrictions may apply.R95-Par tic u late Filter (95% filter efficiency level) effective against all par tic u late aerosols; time use restrictions may apply.P100-Par tic u late Filter (99.97% filter efficiency level) effective against all par tic u late aerosols.
* Es cape only. ** Ef fec tive against, but not NIOSH-ap proved for Io dine Va por.
Notes1. Do not use in atmospheres containing less than 19.5 percent oxygen, in atmospheres containing gases or vapors or in at mo spheres immediately dan ger ous to life and health.2. Do not use in atmospheres containing less than 19.5 percent oxygen, or in at mo spheres im me di ate ly dan ger ous to life and health.3. Do not wear for protection against organic vapors with poor warning properties or those which generate high heats of reaction with the sorbent material in the cartridge.4. 99.97 percent efficient against 0.3 micron DOP.
15Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Flexi-Filter® Pads for Advantage RespiratorsThese low-profile, flexible pads fit well under a welding hood and with other personalprotective equipment. They offer great balance and weight distribution for maintaining a good face seal, while their swept-back design provides improved vision and comfort.
Filter Type & EfficiencySee Definitionson previous page
See Noteson p. 14
MSA Filter Description Part No. Color Coding P100 P95 N95 Notes
Flexi-Filter P100 818342 1,4
Flexi-Filter P100 w/Nuisance Level OV, Ozone Removal 818343 1,4
Flexi-Filter P100 w/Nuisance Level AG, HF Removal 818344 1,4
Flexi-Filter N95 818346 1
Flexi-Filter N95 w/Nuisance Level OV Removal 818347 1
Flexi-Filter P95 818354 1
Flexi-Filter P95 w/Nuisance Level OV Removal 818355 1
Threaded Respirator Cartridges Acid Gases
The Comfo line of particulate, chemical and combination cartridges is NIOSH-certified (to 42 CFR, Part 84). Cartridges fit Comfo Classic, Comfo Elite, Ultra-Twin, Ultra Elite Twin-Cartridge and Duo-TwinRespirators, and certain Advantage Respirators with Adapter.
Org
anic
Vap
or
Chlo
rine
Sulfu
r Dio
xide
Chlo
rine
Dio
xide
Hyd
roge
n Ch
lo-
ride
Hyd
roge
n Su
l-fid
e*
Amm
onia
Met
hyla
min
e
Form
alde
hyde
Hyd
roge
n Fl
uo-
ride
Mer
cury
Vap
or Filter Type & EfficiencySee Definitionson previous page
MSA CartridgeDescription
Re-OrderPart Number
ColorCoding OV CL SD CD HC HS* AM MA FM HF MV P100 R95 N95
See Notes onp. 14
GMA (OV) 464031 (10 in pkg.)with R95 with N95
2,3
GMA P100 815178 (6 in pkg.) 2,3,4
GMA P100 Short Stack 815186 (6 in box) 2,3,4
GMB (AG) 464032 (10 in box)with R95 with N95
2
GMB P100 815179 (6 in box) 2,4
GMC (OV/AG) 464046 (10 in pkg.)with R95 with N95
2,3
GMC P100 815180 (6 in box) 2,3,4
GMC P100 Short Stack 815188 (6 in box) 2,3,4
GMD 464033 (10 in box)with R95 with N95
2,3
GMD P100 815181 (6 in box) 2,3,4
GME (Multigas) 492790 (10 in box)with R95 with N95
2,3
GME P100 815182 (6 in box) 2,3,4
GMI P100 815184 (6 in box) 2,4
Mersorb® 466204 (10 in box)with R95 with N95
2,4
Mersorb P100 815185 (6 in box) 2,4
P100 815175 (10 in box) 1,4
Sparkfoe® P100 815176 (10 in box) 1,4
Low-Profile P100 815177 (10 in box) 1,4
Stand-alone and coverN95 and covers requiredfor Comfo Respirators
816662 N95 (10 in pkg.)816661 N95 (50 in box)489353 Reusable snap-on cover(1 in pkg.; 2 req.)
1
Prefilter and Cover N95
816662 N95 (10 in pkg.)816661 N95 (50 in pkg.)489353 Reusable snap-on cover(1 in pkg.; 2 req.)
1
Prefilter and Cover R95816287 R95 (20 in box)489219 R95 Reusable snap-on cover(1 in pkg.; 2 req.)
1
* Es cape only. ** Ef fec tive against, but not NIOSH-ap proved for Io dine Va por. Note: See WARNING on previous page.
Note: See WARNING on previous page.
ThreadedRespiratorCartridges for Ultra FilterRespirators
MSA Cartridge Description Part No.
Round Ultra FilterCar tridge, box 6 10010420
Round Ultra FilterCar tridge, box 50 10010421
Air-Purifying Respirators/ Industrial
16 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Facepiece Accessories
Advantage 200 LS AccessoriesDescription Part No.
Comfo Cartridge Adapter, pkg of 2 809999
Advantage Fit Test Adapter 10056424
Carrying pouch for half-mask respirators 468730
Comfo Classic Accessories
Comfo Elite Accessories
Advantage 3000 Series Accessories
Description Part No.
QuikChek II Fit-Test Adapter for Comfo Respirators 812022
QuikChek II Replacement Kit with 25 ft of sampling tubing and 25 con nec tors, clips, and suction cups 803196
Carrying pouch for half-mask respirators 468730
Description Part No.
QuikChek II Fit-Test Adapter for Comfo Respirators 812022
QuikChek II Replacement Kit with 25 ft of sampling tubing and 25 con nec tors, clips, and suction cups 803196
Carrying pouch for half-mask respirators 468730
Description Part No.
Spectacle Kit for Advantage Respirators 10029298
Advantage Fit Test Adapter 10056424
Cover Lens Clear, box of 25 10031542
Black plastic carrying/storage case D2056734
Advantage 4000 Series AccessoriesDescription Part No.
Spectacle Kit for Advantage Respirators 10029298
Advantage Fit Test Adapter, for Advantage 4200 Facepieces 10056424
QuikChek III Fit test Adapter for Advantage 4100 Facepieces* 805078
Cover Lens Clear, box of 25 10031542
Clip-On Welders Adapter for Advantage 4200 Twin Port Facepiece, with cover lens, less filter plate 10077063
Clip-On Welders Adapter for Advantage 4100 Single Port Facepiece, with cover lens, less filter plate 10065326
Black plastic carrying/storage case D2056734
*Also requires RD40 Adapter P/N 10065330
Advantage 420 AccessoriesDescription Part No.
Storage poly bag 10097887
Vinyl storage bag with belt loops 468730
Advantage Adapter, pkg of 2, for threaded cartridges 809999
Advantage Quantitative Fit Test Adapter 10056424
Instructional CD 10097899
17Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Facepiece Accessories
Advantage 1000 AccessoriesDescription Part No.
Advantage Fit Test Adapter 10056424
QuickChek Adapter 10006227
Advantage 1000 Cover Lens, clear, box of 25 813832
Clear Lens Shield for Advantage 1000, small 806463
Clear Lens Shield for Advantage 1000, medium/large 806462
Tinted Lens Shield for Advantage 1000, small 806465
Tinted Lens Shield for Advantage 1000, medium/large 806464
Nosecup, black, small 806468
Nosecup, black, medium 806466
Nosecup, black, large 806470
ESP II Communication System for Advantage 1000 10026265
Black plastic carrying/storage case D2056734
Carrying pouch for Advantage 1000 Respirator, black 817040
Ultra-Twin/Ultravue AccessoriesDescription Part No.
Spectacle Kit for Ultra-Twin/Ultravue 454819
QuikChek II Fit-Test Adapter for Ultra-Twin Respirator 812022
QuikChek II Replacement Kit with 25 ft of sampling tubing and 25 con nec tors, clips, and suction cups 803196
QuikChek IV Adapter for Ultravue/Ultra Elite facepieces with a 1/4-turn quick disconnect, comes with Type H cartridge 817446
Twin-Cartridge Adapter for Ultravue Facepieces 803622
Cover Lens, clear, 25/box 456975
Nosecup, black, small 813138
Nosecup, black, medium 813139
Nosecup, black, large 813140
Black plastic carrying/storage case D2056734
Ultra Elite AccessoriesDescription Part No.
Spectacle Kit for Ultra Elite Respirator, side wire support 804638
Spectacle Kit for Ultra Elite Respirator, center support 493581
QuikChek III Fit-Test Adapter for Ultra Elite Respirators 805078
QuikChek IV Adapter for Ultravue/Ultra Elite facepieces with a 1/4-turn quick disconnect, comes with Type H cartridge 817446
Twin-Cartridge Adapter for Ultra Elite Facepieces 803622
Cover Lens, clear, 25/box 491500
Black plastic carrying/storage case D2056734
Air-Purifying Respirators/ Industrial
18 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Qualitative Fit Test Kits and Other Accessories
Advantage Technical Support CD Instant information about MSA’s Advantage 200 LS and 3000 Respirators
• Single source for care & use information, instruction manuals, fit-testing forms, parts lists and cartridge information
• Enhances your use of MSA’s lighter, softer half-mask and optically correct, comfortable full-face respirators
• Convenient, immediate, paperless retrieval• Easy-to-use, interactive format• Multi-lingual English/Spanish• Call MSA Customer Service for your FREE copy!
MSA Confidence Plus® Germicidal CleanerMix with warm water for a germicidal cleaner that is effective against various micro-organisms including immunodeficiency virus Type 1 (HIV-1, associated with AIDS). EPA-approved for use on safety equipment.
Personal Safety Equipment TowelettesProvides an excellent method for wiping and refreshing respirators, hardhats, and other safety equipment between full cleaning periods.
Cleaning AccessoriesCanister with 220 towelettes, 4-1/4" x 6" 697382
Box of 100 individually wrapped towelettes, 7-1/4" x 5" 697383
“The Big Ones,” Box of 50 individually wrapped towelettes, 8" x 11" 10022871
MSA Confidence Plus Germicidal Cleaner, in 32 oz. bottle 10009971
Facepiece Fit-Test KitsThe Occupational Safety and Health Ad min is tra tion (OSHA) requires fit tests to ensure proper fit for work ers who use res pi ra tors.Quantitative testing methods rely on objective data to de ter mine a proper fit. Qualitative fit-test methods are sub jec tive in natureand rely on the judgment of the test subject.
Bitrex Qualitative Test Kit
Replacement Hood & Test Solutions
Banana Oil Test Kit
Bitrex Qualitative Fit-Test KitBitrex QLFT Kit 697444
Replacement Fit-Test Solution 697446
Sensitivity Solution 697445
Replacement Hood 697448
“Using the Qualitative Fit-Test Kit” videotape 697449
Saccharin Qualitative Fit-Test KitThe Saccharin Qualitative Fit-Test Kit eliminates the need for special filters and is es pe cial ly useful for dust/mist res pi ra tors.
Saccharin QLFT Kit 697287
Replacement Sensitivity Test Solution, 55 ml bottle 697285
Replacement Fit-Test Solution, 55 ml bottle 697286
Replacement Hood 697448
“Using the Qualitative Fit Test Kit” videotape 697325
Banana Oil Qualitative Fit-Test KitMSA’s Banana Oil Fit-Test Kit relies on a test subject’s ability to detect a 95% pure solution of Isoamyl Acetate (banana oil).
Qualitative Fit Test Kit 801628
Qualitative Fit Test Kit, in rugged Pelican case 801629
19Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Other Accessories
Welder’s Adapter with AutoChange Lens
Welder’s Hood with AutoChange Lens
Welder’s AccessoriesClip-On Welder’s Adapter for Ultravue and Ultra Twin Facepiece; with cover lens, less filter plate 472859
Integral Welder’s Adapter for Ultravue and Ultra Twin Facepiece; with cover lens, less filter plate 470786
Clip-On Welder’s Adapter for Ultra Elite Facepiece; with cover lens, less filter plate 806482
Clip-On Welder’s Adapter for Advantage 4200 Twin Port Facepiece; with cover lens, less filter plate 10077063
Clip-On Welder’s Adapter for Advantage 4100 Single Port Facepiece; with cover lens, less filter plate 10065326
Auto-Change Electronic Welding Lens 10068601
Polycarbonate Cover Plate (4-1/2 x 5-1/4) 696095
Rayfoe Filter Plate, shade 6, heat-treated 38346
Rayfoe Filter Plate, shade 10, heat-treated 38347
Rayfoe Filter Plate, shade 12, heat-treated 38277
Rayfoe Filter Plate, shade 14, heat-treated 38348
Cover Lens 696095
Welder’s Hood, Kevlar 486328
Welder’s Adapter for Full-Facepiece Res pi ra torsMSA Welder’s Adapters are molded of polycarbonate plastic, which has high resistance to impact, heat, and welding splatter.The clip-on adapter attaches to the facepiece by molded-in clips. The integral adapter is attached by removing the facepiecelens and replacing it with the adapter. A large vision area—4-1/2" x 5-1/4"—provides an unobstructed view of work. The Welder’s Adapter is supplied with an impact-resistant cover lens; the desired filter plate is ordered separately. Rayfoe™Filter Plates are available in four standard shades—6, 10, 12, 14.
The AutoChange Electronic Welding Lens is for use with MSA Welders Adapters. The solar-powered AutoChange WeldingLens is an automatic-darkening welding filter. The welding lens is in the light state (semi-transparent) before welding anddarkens within 0.4 milliseconds after an arc is struck.
The heat-resistant Welder’s Hood is designed to protect the welder’s head, neck, and shoulders from welding splatter andsparks. The Kevlar hood has a rubber seal which fits snugly over the Welder’s Adapter. The hood also helps protect cartridgeswhen an air-purifying respirator is used in welding operations.
Online Response® Respirator Selector
Available on the internet at www.MSAnet.com/response
• Helps identify the proper respirator you need
• Has broadest range of respiratory protective devices available
• Recommends respirators for more than 700 chemical hazards
• Has nearly 3,000 chemical synonyms
• Lists up to 27 categories of respirators, with MUCs
• Is generic in nature
Cartridge Life Expectancy Calculator
Available on the internet at www.MSAnet.com/msanorthamericaDrag your mouse onto Resources, then Tools, then Cartridge Life Calculator
MSA’s interactive web pages help users determine the life expectancy of specificrespirator cartridges in various hazardous situations. This information providesguidance for how long a cartridge should be used before it must be replaced.
MSA University, MSA’s premier online
training center, offers a wide range
of training andinformational materials.
Register today atwww.MSAnet.com/MSAU
Air-Purifying Respirators/ Industrial
20 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Chin-Type Gas Masks
The Chin-Type Gas Mask is a protective systemconsisting of a full facepiece and canister. The small, round plastic canister attaches directly to the facepiece. The system is designed to permitdownward head movement.
The Chin-Type Gas Mask is designed for respiratoryprotection against a specific gas or group of gases asindicated by canister identification. See the canistertable for specific canister approvals. From a practicalstandpoint, gas masks are generally suitable forventilated areas with relatively stable contaminantconcentration levels. They should never be used inconfined spaces or where oxygen deficiency and highgaseous concentrations may occur. Gas masks mayalso be used for escape only from atmospheres inwhich the contaminant concentration does notexceed the maximum use condition of the gas mask.
FacepiecesWhether you choose the Advantage 4000, Advantage3100, Ultravue or Ultra Elite facepiece, all four areavailable in three sizes to accommodate a wide rangeof users. The Advantage 3100 facepiece has a siliconerubber facepiece, while the Advantage 4000, Ultravueand Ultra Elite facepieces are available in a choice ofsilicone or Hycar rubber. All have a scratch-resistantpolycarbonate lens that provides a wide field ofvision. Optional lens cover accessories provide evengreater scratch resistance. All three facepieces featurea nosecup that helps reduce lens fogging in lowtemperature conditions or in high-humidity conditions.
Belt-Mounted VersionThe belt-mounted version of the Chin-Type Gas Maskallows the wearer to mount the chin-style canister ona support belt. This shifts the weight of the canister tothe hip, providing greater comfort for some wearers.The belt-mounted version is also recommended forwelding or grinding operations, as the canister can bepositioned away from sparks or molten metal. Anoptional spark cover is available to protect canisterfrom spark damage. The additional parts needed arelisted below. See page 19 for Welders Adapters, lensesand protective hood.
Advantage 3100
Facepiece(with canister)
Ultravue Facepiece
(with canister)
Ultra EliteFacepiece
(with canister)
Advantage 4000
Facepiece (with canister)
21Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Air-Purifying Respirators/ Industrial
Chin-Type Gas Masks
Replacement Canisters for Chin-Type Gas Masks
MSA Canister Identification Purifying Protection Code
ColorCoding Approval
Maximum Use ConditionsGas/Vapors Part No.
% Volume PPM
Phosphine/Ammonia/Chlorine/P100 PH/AM/CL TC-14G-0274 0.50%
0.15%50001500
Ammonia and Chlorine*Phosphine* 10059903
Organic Vapor/P100 OV TC-14G-0279 0.50% 5000 Organic Vapors, also effective against organic iodides and iodide vapors* 10067469
Hydrogen Fluoride/Chlorine/P100 HF/CL TC-14G-0280 0.10% 1000
5000Hydrogen Fluoride*Chlorine 10067491
Formaldehyde Acid Gas/Chlorine Dioxide/Escape fromHydrogen Sulfide/P100
FM/AG/CD/HS TC-14G-02820.05%0.50%0.10%
50050001000
Formaldehyde*Acid Gases and Hydrogen Sulfide*Chlorine Dioxide*
10067470
Gas Mask Facepieces
Material
Advantage 4100 Facepiece (also requires RD40 Canister Adapter P/N 10065330)Small Medium Large
Black silicone, with net head harness 10083796 10083792 10083800
Black Hycar, with net head harness 10083797 10083793 10083801
HarnessAdvantage 3100 Single-Port Respirator FacepieceSmall Medium Large
with Rubber Harness 10028999 10028998 10029000
with Advantage Harness 10031343 10031342 10031344
Material
Ultravue Facepiece Ultra Elite FacepieceSmall Medium Large Small Medium Large
Black Silicone 480251 480247 480255 493072 493028 493116
Black Hycar 471218 457126 471230 493064 493020 493108
Additional Parts for Belt-MountingBelt Clip 10068195
Breathing Tube 10068129
PVC Belt 473902
Web Support Belt, uncoated 9961
Polyurethane-coated Nylon Support Belt 492827
Spark Cover 10068152
Storage Cases for Chin-Type Gas MaskMSA Canister Identification: Phosphine/Ammonia/Chlorine/P100 10075204
MSA Canister Identification: Organic Vapor/P100 10075207
MSA Canister Identification: Hydrogen Fluoride/P100 10075205
MSA Canister Identification: Formaldehyde Acid Gas/Chlorine Dioxide/Escape from Hydrogen Sulfide/P100 10075206
Wall bracket 10071231
* Canister contains a P100-Particulate Filter (99.97% filter efficiency level) against all particulate aerosols.