About E Course
-
Upload
frank-john -
Category
Documents
-
view
14 -
download
0
description
Transcript of About E Course
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 1
E-Course
New Year Greetings !!
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 2
E-Course on
Seismic Design of Liquid Storage Tanks
January 16 – February 6, 2006
About the E-Course
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 3
Welcome… Welcome to the second E-Course in India
in Civil Engineering. First E-course was on IS 1893 (Part
I):2002, in January 2003. This presentation gives you an idea on
conduct of the course. Your instructors:
• Sudhir K Jain of IIT Kanpur• Durgesh Rai of IIT Kanpur• O R Jaiswal of VNIT Nagpur
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 4
Conduct of Course The entire material will be divided into about
eight lectures. The lectures will also cover IITK-GSDMA
Guidelines for Seismic Design of Liquid Storage Tanks.
This document is available on: http://www.iitk.ac.in/nicee/IITK-GSDMA/EQ08.pdf
Please download this document and keep a hard copy for ready reference.
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 5
About IITK-GSDMA Guidelines This document is not a BIS code. BIS is considering it for IS 1893 (Part 2) of
tanks It has two parts
Part 1 contains Provisions & Commentary Part 2 gives six solved examples
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 6
About IITK-GSDMA Guidelines
Part 1 is written in Code-like format. It gives Commentary of clauses, wherever
necessary. It has two column format; Provisions on left
and Commentary on right side Consistent with present international practice of code writing
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 7
About IITK-GSDMA Guidelines
International codes & research papers used in the development of this document, are given in Clause 0.4 (p. 3), C0.5 (p.4), and Commentary References (p. 54, 55). These may be referred in these lectures also Some important references are given on next
slide It is suggested that you keep them also with
you
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 8
About IITK-GSDMA Guidelines1. IS 1893 (Part 1):2002, “Indian Standard Criteria for Earthquake Resistant Design of
Structures: General Provisions and Buildings”, Bureau of Indian Standards, New Delhi.
2. IS 11682:1985, “Criteria for Design of RCC Staging for Overhead Water Tanks”, Bureau of Indian Standards, New Delhi.
3. Jaiswal, O. R. Rai, D. C. and Jain, S.K., 2004a, “Codal provisions on design seismic forces for liquid storage tanks: a review”, Report No. IITK-GSDMA-EQ-01-V1.0, Indian Institute of Technology Kanpur, Kanpur. (www.iitk.ac.in/nicee/IITK-GSDMA/EQ01.pdf )
4. Jaiswal, O. R., Rai, D. C. and Jain, S.K., 2004b, “Codal provisions on seismic analysis of liquid storage tanks: a review” Report No. IITK-GSDMA-EQ-04-V1.0, Indian Institute of Technology Kanpur, Kanpur. (www. iitk.ac.in/nicee/IITK-GSDMA/EQ04.pdf )
5. Sameer, S. U., and Jain, S. K., 1992, “Approximate methods for determination of time period of water tank staging”, The Indian Concrete Journal, Vol. 66, No. 12, 691-698. (http://www.nicee.org/ecourse/Tank_ICJ.pdf)
6. Sameer, S. U., and Jain, S. K., 1994, “Lateral load analysis of frame staging for elevated water tanks”, Journal of Structural Engineering, ASCE, Vol.120, No.5, 1375-1393. (http://www.nicee.org/ecourse/Tank_ASCE.pdf)
7. Rai D C, 2002, “Review of code design forces for shaft supported elevated water tanks”, Proc.of 13th Symposium on Earthquake Engineering , Roorkee, Ed. D K Paul et al., pp 1407 -1418. (http://www.nicee.org/ecourse/12_symp_tanks.pdf)
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006 About E-Course / 9
Conduct of Course Lectures will be posted to you by email,
twice a week. If needed, we may extend duration of the
course by one week. During the course, some assignments
will also be sent to you Assignment may ask you to:
Read some parts of the guidelines Answer some simple questions, or Solve some simple problems
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006About E-Course / 10
Homework Assignments To get maximum benefit from the course,
you need to be regular with assignments. Answers to the homework problems will
be supplied a few days later. You may compare your solution with the
supplied solution and grade yourself
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006About E-Course / 11
Questions You are encouraged to ask questions The following schedule for questions and
answers will be followed: All questions about a lecture must be asked
within three days of the lecture being sent All questions about an assignment must be
asked within three days of the solution being provided.
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006About E-Course / 12
Questions
The above schedule for questions will help Consolidate all the questions and address
them in a systematic way. Participants to be regular in studying
It may not be possible for us to answer questions after the course is over. Hence, make sure you ask all your queries
during the course.
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006About E-Course / 13
About Course Materials The lectures to be sent to you
Are the intellectual property of the instructors Are meant for only your learning during the
course Are not to be shared by you with others Are not to be reproduced in any form for any
purposes The concept of E-course demands that this
code of ethics is followed.
Sudhir K. Jain, IIT Kanpur E-Course on Seismic Design of Tanks/ January 2006About E-Course / 14
Finally… Thank you for your enrolment in the E-
Course We wish you a fruitful learning experience