ABES Public Design | Catalogue 2014 | English

Street Furniture 2014 | 2015

2 0 Y E A R S

1 9 9 4 - 2 0 1 4

2

Project: Manchester, Great Britain

INTR

OD

UCT

ION

Overview of RAL CLASSIC colours www.abes-online.com/ral

STANDARD COLOUR NAMES (no surcharge)

RAL 3020 Traffic red

RAL 6005 Moss green

RAL 6009 Fir green

RAL 7016 Anthracite grey

RAL 7035 Light grey

RAL 9005 Jet black

RAL 9006 White aluminium

RAL 9016 Traffic white

DB 703 Glimmer grey

Colour presentation is not binding. Further RAL and DB colours possible with a surcharge (no surcharge with supply of at least 10 pieces)

INNOVATIVE TECHNOLOGY COMBINED WITH UNIQUE DESIGN

Founded in 1994, ABES focused on the design of urban furniture

and elements for public space since 1999.

ABES' extraordinary, patented 3p-Technology system was

developed with the customer‘s needs in mind. This advanced

technology allows easy, time-saving and low-cost repair of

public furniture. The main idea is to connect bollards with

a junction piece having a predetermined breaking point. If

damaged, object and foundation stay intact, and only the

junction piece has to be replaced on site.

ABES offers unique products with an individual character. They

attract attention, inspire people, and encourage viewers to

engage in a variety of opinions and discussions, which creates

their uniqueness. This has been confirmed by the “Design Centre

North Rhine-Westphalia” by giving the red dot award to the

Signum I bike stand and the Metropol bollard, which are built

using 3p-Technology. We use a variety of first-class materials

for ABES products.

Apart from galvanised or stainless steel and selected woods,

ABES is increasingly using cast iron or cast aluminium. These

materials, which have been somewhat forgotten, have special

characteristics so that regular welding techniques cannot be

used for them.

Last but not least, cast technology is extraordinarily environ-

mentally friendly because 95 % of the materials originate from

recycled resources, and the products themselves can be almost

completely recycled. When choosing these raw materials, you

are helping our environment by saving scarce resources and

avoiding waste production.

Discover the aesthetically and technically innovative ABES

products for yourself.

3

>

74-79 | L ighting bol lards80-83 | Feeder bol lards

134- 135 | ABES meets Art . 136 | Product overview138- 141 | References/Projects

3p-Technology

3p-High

Fixed mounting

Screw-on

Fold down

Removable (not 3p-Technology)

DELIVERABLE MOUNTING VARIANTS:

CON

TEN

T

CONTENT

ABES 3P-TECHNOLOGY

REST FURNITURE & TABLES

WASTE CONTAINERS

BICYCLE STANDS

PLANTERSTREE GUARDS

HWS-mobi l !FLOOD PREVENTION

BOLLARDS

PAGE 8-17

PAGE 84-105

PAGE 106-115

PAGE 116-127

PAGE 128-133

PAGE 134-141

PAGE 142-143

PAGE 18-83

OVERVIEW

4

Mis

ter N

23

Clas

sic

25

Aven

ue

29

Corn

iche

22

Fron

tera

24

Airp

ort

28

Sent

inel

1R

27

Sent

inel

100

0 | 1

200

26

39

Met

ropo

l 10R

K

Met

ropo

l 520

5RK

35

Man

tero

45

Rout

iero

1R

55

33

Met

ropo

l 1RZ

600

| 87

0

Glo

bo 2

47

Flor

es

41

Geo

rge

43

Lim

es 2

53

37

Met

ropo

l 1RK

38

Met

ropo

l 3RK

Met

ropo

l 3RZ

34

Vent

ana

44

Rout

iero

870

| 12

00

54

32M

etro

pol 0

RZ

Met

ropo

l 0RK

870

| 12

00

36

Glo

bo 1

46

Mon

deal

56

Epoq

40

NU

850

| 10

00 |

1300

50

Chau

ssée

42

Lim

es 1

52

Juko

s

49

Tube

2 75

0 | 9

50

48

Boul

evar

d

51

12 13 1514

Rubb

er D

uck

30

57

Traf

fik

BOLLARDS All bollards (except for Ennos, Basar and Marché) can be supplied with 3p-Technology

OVE

RVIE

W

3P-TECHNOLOGY PAGE 8-17

PAGE 18-83

Gro

und

shel

ls

Gro

und

shel

l cov

ers

Clam

ping

bol

t set

s

Junc

tion

piec

es

5

Flor

a

86

Ased

a

95

Lign

e

88

Cana

pé

89

Cadr

e

90

Cadr

e-T

92

Cadr

e-Q

94

Lim

es W

ood

96 98

99

Spar

ta

104

Lava

rio

102

Med

es

87

105

Rect

ana

Tras

h &

Go

Mar

ché

Basa

r

6967 68

80 8382

Belv

al

Esch

er T

urm

Urb

ana

600

| 900

City

King

Faru

s

Prot

ecto

r ST

180

· 600

| 22

0 · 7

20

Prot

ecto

r AG

180

· 600

| 22

0 · 7

20

Glo

tero

Bare

na

Bare

na2M

BB91

Enno

s

Prot

ecto

r 1R

150

· 100

0

Prot

ecto

r 1R

250

· 100

0

Prot

ecto

r LED

150

· 10

00

Prot

ecto

r LED

180

· 60

0

Rout

iero

LED

58 59 60 61 65

70 71

6462 63 66

7872 73 777675

Vis-

à-Vi

s

OVE

RVIE

W

Woo

d

PAGE 84-105REST FURNITURE & TABLES

FB-Q

Cas

t alu

min

ium

FB-Q

Ste

el

Other bollard designs can be developed upon request.Li

mes

Fer

rum

w/o

b. r

.

Lim

es F

erru

m w

/ b. r

. 2014

2014

2014

2014

2014

2014

2014

2014

2014

6

LuxB

in S

Vidu

ra

LuxB

in W

Colle

ctor

Filo

u

110 112111 113 114

Gat

e

Salo

on

118 119 120 122121

123 124 127

Uni

ted

5

Indi

co

Velo

Pol

Sign

um I

Sign

um II

Güt

ersl

oh

Hum

us Q

| R

Barr

igo

130 132 133

Tras

h &

Go

80

OVE

RVIE

W

WASTE CONTAINERS PAGE 106-115

BICYCLE STANDS PAGE 116-127

Sign

um I

5 in

a ro

w

P LANTERS | TREE GUARDS PAGE 128-133

2014

7

87

105

Vis-à-Vis Park Bench

Filou Waste ContainerProtector 1R 150 ·1000Bollard

FB-Q Steel Bollard FB-Q Aluminium Bollard

BB91 Bollard

Protector 1R 250 ·1000Bollard

Rectana Bollard

Protector LED 150 ·1000Lighting bollard

NEW

PRO

DU

CTS

2014Medes Lean-on element

2014

66 67

68 69

11472 73 77

8

The patented 3p-Technology helps lowering maintenance costs and ensures flexible use as a fixing system, since the products can be assembled and dismantled quickly and easily.

The 3p-Technology is available for almost all bollards, as well as for some benches and waste containers. Products with 3p-Technology are interchangeable and can be replaced one with the other.

9

3P-T

ECH

NO

LOG

Y

10

WHAT IS THE ABES 3P-TECHNOLOGY?

1 | FOR BOLLARDS: SYSTEMATIC REPAIRS

The patented 3p-Technology revolves around the junction piece with a predetermined breaking point. If a bollard with

3p-Technology suffers an impact, the junction piece gives way

without damaging the bollard or the foundation, which would be

the case for fixed mountings. All parts including the foundation and paving remain undamaged, except for minor scratches on the bollard.

The bollard can be immediately resurrected by simply fitting a new

junction piece on site. The 3p-Technology helps to lower the costs

of maintenance, and also allows vast freedom of design since the

bollards can be removed depending on the system.

2 | FOR BENCHES & WASTE CONTAINERS: FLEXIBILITY AND EASY ASSEMBLY

The 3p-Technology originally developed for bollards has been

adapted to some bench systems and waste containers, thereby

making assembly and maintenance significantly easier.

With 3p-Technology, any of the products can be quickly and

easily assembled and dismantled.

3p-T

echn

olog

y de

velo

per:

Prof

. Mic

hael

Sch

uth,

Trie

r Uni

vers

ity o

f App

lied

Scie

nces

, Mec

hani

cal E

ngin

eerin

g. E

urop

ean

pate

nt n

umbe

r: 01

10 5

289.

1-23

03

COSTS (FOR BOLLARDS)

ASSEMBLY

PLANNING AND MAINTENANCE

ADVANTAGES AT A GLANCE

All products that can be equipped with 3p-Technology are shown with this logo in the catalogue

3P-T

ECH

NO

LOG

Y

· All products can be removed as per the system

· Fast removal of public furniture temporarily creates additional space for gatherings, markets or car parks

· The ground shells can be covered; this reduces tripping hazard and keeps the ground shell clean

· Maintenance work does not have to be performed on site

· Products with 3p-Technology are interchangeable and can be replaced one with the other.

· System is extremely sturdy

· Fast replacement with simple tools

· Standard triangular bolts and keys can be used

· Only EUR 27.50 for a replaceable junction piece with breaking point

· Less than 3 minutes working time

· Bollards, foundations with floor sleeves and plaster usually remain intact

· Costs reduced by up to 90 %

11

3

3

3

3

3

3

1

1

1

11

1

1

1

2

2

2

2

2

2

THE FUNCTIONAL PRINCIPLE *

NEW JUNCTION PIECE (INSERTION)

Insert junction piece and turn 90°

Mount bollard

Screw in clamping bolts

BOLLARD ASSEMBLY/DISMANTLING

Detach clamping bolts, but do not unscrew them completely

Turn bollard 90° and pull out together with junction piece and clamping bolt

Cover the ground shell

BROKEN JUNCTION PIECE (REPLACEMENT)

Detach clamping bolts

Lift down bollard

Turn the junction piece 90° and pull out

DAMAGING THE BOLLARD

Damage caused by impact from a car

The replaceable junction piece snaps at the breaking point.

The broken junction piece is detached and removed.

The junction piece is replaced.

The bollard can also be temporarily removed.

* The operating principle described applies primarily to bollards, although the assembly and disassembly of benches and waist containers with 3p-Technology are identical.

Video on the 3p-Technology at www.abes-online.com/Videos

3P-T

ECH

NO

LOG

YBr

eaki

ng p

oint

Repl

acea

ble

ju

nctio

n pi

ece

12

ø 41

30

ø 44,3

35

ø41

30

ø 44

75

1 | CLAMPING BOLTS

COMPONENTS OF THE 3P-TECHNOLOGY

CLAMPING BOLT SET (STANDARD)

· Tightens the system firmly

· Firm, stable bollard base

· Hex head bolt M12 with lock nut

· Optional: triangular bolt (to allow access for emergency services)

· Material: stainless steel 1.4301

000.004

Cross-section Cross-section

CLAMPING BOLT SET WITH TRIANGULAR HEAD BOLT

· One-side opening and closing with male triangular key according to DIN 22417

· Comprising one clamping cone and a M12 bolt with a triangular head


· Additional costs according to the price list

000.010

Cross-section

LENGTHENED CLAMPING BOLT

· Additional protection by a padlock in order to prevent unauthorised removal

· Possible use with triangular head bolt or with hex head bolt



N1 N3

N2

N5

000.021

Cross-section

Before installation, we recommend greasing hex head bolt and nut with a special ceramic paste.Please enquire! We will be happy to advise you.

3P-T

ECH

NO

LOG

Y

13

500

125

300

125

125

100

120

200

200

d = 15-17 mm

2 | GROUND SHELLS

GROUND SHELLS 300 mm, 500 mm, 100 mm

· Extremely robust component (5 / 7.2 / 8.6 kg) for long-lasting concrete embedment

· 300 mm ground shell: basic equipment

· 500 mm ground shell: optional for additional stability (e.g. with soft, unstabilised subsoil)

· 100 mm ground shell: optional as special solution in case of small mounting depth (e.g. car parks)

· Material: cast iron, galvanised

· Each delivery is accompanied by detailed installation instructions and can also be downloaded as PDF on our web site.

000.001 | 000.003 | 000.005

Cross-section (500 mm)

300 mm (standard)

500 mm 100 mm



Top view (100 mm)

Top view (300/500 mm)

In order to prevent the interruption of the construction process, the ground shells can be delivered in advance, if requested.

3P-T

ECH

NO

LOG

Y

14

240

165

355

448

83

57

3 | JUNCTION PIECES WITH PREDETERMINED BREAKING POINT

COMPONENTS OF THE 3P-TECHNOLOGY

JUNCTION PIECE WITH STEEL SPRING (3P-FLEX)

· Bollard returns to original position after impact

· 8 -10° flexure (the predetermined breaking point yields if the spring is overexpanded)

· Same features as the junction piece without anti-roll device



· Details see page 16

JUNCTION PIECE (standard) | WITH ANTI-ROLL DEVICE | EXTENDED (3P-HIGH)

· Links bollard to the ground shell

· Constructive element with a pre-determined breaking point

· Can be instantly replaced if damaged

· Optional with anti-roll device to prevent rolling away

· Optional 3p-High with extended connection (details see page 16)


000.015

Cross-section

Cross-section standard

Top view

Cross-section with anti-roll

device Cross-section extended (3p-High)

With anti-roll device

Standard

Extended (3p-High)

3P-T

ECH

NO

LOG

Y

000.008 | 000.013 | 000.016

15

92

125

125

ø 25

120

4 | GROUND SHELL COVERS

GROUND SHELL COVER (STANDARD)

· Reduces hazard tripping

· Prevents soiling

· Material: cast aluminium

GROUND SHELL COVER WITH SPRING

· Ground shell cover with spring

· Can only be removed with a flat object (screwdriver)

· Material: ST37 steel, hot-dip galvanised

000.002

000.050

Cross-section

Cross-section

Top view

Top view

3P-T

ECH

NO

LOG

Y

16

ALTERNATIVE FORMS OF 3P-TECHNOLOGY

3P-HIGH

For many bollard models, the 3p-Technology aperture can be moved

further upwards. This way it is possible to open and close the locking

mechanism with long fire brigade triangular keys without offsets.

This version requires an extended junction piece.

At small diameters the clamping bolts may protrude slightly. In case

of doubts, please contact us.

3P-FLEX

When pressure is applied on the bollards, the steel springs on the

junction piece yields up to 8 - 10°, preventing damage to the bollard,

the foundation and the pavement. If the pressure is reduced, the

bollard returns to its original position.

· Bollard returns to its original position after impact (8 –10° flexure). When the breaking load is exceeded, the predetermined breaking point yields.

· Junction piece needs to be replaced even less frequently

· Additional costs for the junction piece amortize in short-term

· Vehicle damage is reduced by the bollard’s flexible yielding

3p-FLEX

The bollard yields

Vehicle

Realigns the bollard

Steel spring yields in the junction piece

3p-High 3p-Normal

3P-T

ECH

NO

LOG

Y

17

BUNDESANSTALT FÜR STRASSENWESEN

APPLICATION

APPLICANT: ABES Büro Deutschland

Zur Ehreneiche 3

57250 Netphen

APPLICATION DATE: 27 August 2002

SUBJECT OF APPLICATION: Confirmation of the effort required to repair a damaged bollard

TEST

A properly installed Metropol bollard with 3p-Technology is damaged by a car (see figure 1 and figure 2).

MATERIAL

DESCRIPTION*: Metropol bollard with 3p-Technology including:

· Ground shell n° 000.001, globular cast iron GGG, embedded at ground level

· Junction piece, globular cast iron GGG, with hexagon bolt and nut M12, stainless steel 1.4301, n° 000.008

· Clamping cone, stainless steel 1.4301, Nr. 000.004

· Anchor, galvanised steel ST 37, n° 000.013

· Bollard, cast iron GG 20, n° 001.003

SERIAL NUMBER: None

CONDITION: New

*provided by applicant

Report n° V4 – 61/2002 dated Sep 13, 2002

on the

1 | Bollard before damage

3 | Bollard system after damage

4 | Junction piece: damaged (right) and replacement (left)

5 | Repairing the bollard

2 | Damaged bollard

The junction piece yields, the bollard falls over and is held to the ground shell by an anchor. The bollard itself, the ground shell and the foundations do not show any visible signs of damage (see figure 3).

The bollard is mounted with a new junction piece within 3 minutes (see figure 4 and figure 5). After repair the bollard is firmly fixed in place.

(Dipl.-Phys. U. Ellmers)

Oberregierungsrat

(Dipl.-Phys. D. Heuzeroth)

Regierungsrat

CHARACTERISTICS OF A BOLLARD SYSTEM REGARDING THE EFFORT REQUIRED FOR REPAIR

(FEDERAL HIGHWAY RESEARCH INSTITUTE)

3P-T

ECH

NO

LOG

Y

BARRIER POSTS or BOLLARDS are natural parts of our cityscapes. Elegant boundaries or driveway and walkway markings are just a few of their many applicabilities. The various ABES designs, ranging from classic to modern, allow the harmonic integration of bollards in any environment.

These objects are permanently exposed to the risk of being knocked over by cars pulling in and out of parking bays. To counteract this risk, ABES has developed the 3p-Technology for bollard fastening as an alternative to fixed mounting. This is an easy and low-cost way to replace damaged bollards.

BOLL

AR

DS

20

1

2

3

4

5

1 2 3

4 5

MO

UN

TIN

G V

AR

IAN

TS

3p-Technology is by far the most frequently ordered type of mounting. It is used in more than 85 % of cases, because it significantly reduces costs.

3p-Technology

3p-High (see page 16)

Fixed mounting

Screw-on

Fold down *

* The embeddable fold down version is currently available for the following bollards: Metropol 0RZ, Metropol 1RZ, Metropol 3RZ

21

1

2

6

3

7

4

8

5

9

10

21

10

Met

ropo

l 3 R

Z

Airp

ort

Sent

inel

1R

Sent

inel

Sent

inel

Met

ropo

l 3 R

Z

Met

ropo

l 3 R

Z

Met

ropo

l 10

RK

Met

ropo

l 3 R

Z

Met

ropo

l 3 R

Z

8

43

7

5

9

6

Paintwork, reflective tapes, finishings, eyelets, chains etc. are available on request.

SPEC

IAL

MO

DEL

S

3 grooves with reflecting paint

1 ring with reflecting paint

With one ring of reflective tape

With three rings of reflective tape

With a powder coated ring

Powder coated Red/white

Finished with logo (Available for all products made of cast aluminum)

With eyelets & chain

Stainless steel: 240 grain - pickled

Stainless steel: electropolished (high-gloss)

OPTIONAL DELIVERIES

Corniche

22

Colour: DB 702

BO

LLA

RD

S

Measurements

Height above ground level: 780 mm

Diameter: 90 mm / 100 mm

Height ground shell: 300 mm or 500 mm

Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

Finish

· Powder coating in standard RAL colours or DB 703

· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge

· For details, see catalogue p. 12-21 and price list

Specifications

Cylindrical bollard made from cast aluminium with a cast, narrow groove that separates the slightly tapering top from the bollard and an accentuated cylindrical base.

Mounting

Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones, a hex head bolt and a lock nut.

Alternative: concrete embedment

Fixed mounting 3p-Technology

Cast aluminium 034.001 034.020

100

780

300

90

300/

500

780

90

Mister N

23

Colour: DB 703

BO

LLA

RD

S

Measurements




Weight: approx. 10.5 kg (for fixed mounting + 1.5 kg)

Finish


· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge


· Extended junction piece required for 3p-High

Specifications

Cylindrical bollard made from cast aluminium with a top sphere, with a horizontal indentation, and an accentuated base.

Mounting



Fixed mounting 3p-Technology 3p-High

Cast aluminium 023.001 023.020 023.030

85

300/

500

910

100

85

300

910

Frontera

24

Colour: DB 703

Measurements


Diameter: 90 mm



Finish


· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge.


Specifications

Cylindrical bollard made from cast aluminium with a two-part base and a hemispere on top separated by a ring.

Mounting





BO

LLA

RD

S

300/

500

90

900

300

90

900

Classic

25

Finish




Colour: DB 703, Design: “hammer.runge design”

Measurements


Diameter: 144 mm/120 mm



Specifications

Cylindrical bollard made from cast aluminium with twelve window-like cast indentations, a protruding top and a distinct cylindrical base.

Mounting





Registered design M 9801747.0

BO

LLA

RD

S

300/

500

738

144

300

120

738

144

Sentinel1000 | 1200

26

Colour: DB 703

Measurements

Height above ground level: 1000 mm | 1200 mm | acc. to cust. needs

Diameter: 108 mm


Weight: approx. 10 kg | 12 kg (for fixed mounting + 1.5 kg)

Finish

· Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge





· Steel ST37: other lengths available to customer‘s wishes (with surcharge or discount)

Specifications

Cylindrical galvanised steel bollard with a slightly domed top.

Mounting



1000

| 12

00 |

acc.

to c

usto

mer

’s ne

eds

1000

| 1

200

| ac

c. to

cus

tom

er’s

need

s


1000 mm, stainl. steel 1.4301 047.001 047.020 047.030

1000 mm, ST37 steel 042.001 042.020 042.030

1200 mm, ST37 steel 042.001.120 042.020.120 -

BO

LLA

RD

S

300/

500

108

300

108

Sentinel 1R

27

Surface: stainless steel

Measurements

Height above ground level: 1000 mm | acc. to cust. needs

Diameter: 108 mm


Weight: approx. 11.5 kg (for permanent installation + 1.5 kg)

Specifications

Fully cylindrical bollard made from galvanised steel/stainless steel, including a circumferential groove and a slightly domed top.

Mounting



Finish






· Steel ST37: other lengths available to customer‘s wishes (with surcharge or discount)

1000

| ac

c. to

cus

tom

er’s

need

s

1000

| a

cc. t

o cu

stom

er’s

need

s


Stainless steel 1.4301 056.101 056.120 056.130

ST37 steel 056.001 056.020 056.030

BO

LLA

RD

S

300/

500

108

300

108

Airport

28

Finish




Colour: DB 702, Design: Thomas Wüsten – GFP

Measurements


Diameter: 80 mm /100 mm



Specifications

Cylindrical bollard made from cast aluminium with a cast recess separating the bollard optically from its top and a distinct cylindrical base.

Mounting



Special modelsEmbellished with logo

Fxed mounting 3p-Technology


BO

LLA

RD

S

300/

500

870

80

870

300

80

100

Avenue

29

Finish






Measurements


Diameter: 140 mm



Specifications

Cast aluminium bollard with a triangular base shape and a slightly domed top. The bollard tapers towards the middle.

Mounting




Cast aluminium 012.001 012.020 012.030


BO

LLA

RD

S

300/

500

140

820

300

140

140

820

Rubber Duck

30

FEATURES

· Suitable for playground areas

· Low risk of injury due to rubber granulate

· High stablility due to internal steel tube

· Can be used as seat

Specifications

Dual waisted bollard made of rubber granulate with a distinct top, middle and base section.

Mounting



Finish

· Material: rubber granulate

· Available colours (not RAL): reddish-brown (see photo), grey, green, anthracite, other colours on request

· See price list for details

Measurements

Height above ground level: 600 mm (900 also available, at a surcharge)

Diameter: 200 mm



Colour: reddish-brown


Rubber 026.001 026.020

BO

LLA

RD

S

300/

500

300

200 200

600

600

31

Bollards: Metropol 3RK

Luxe

mbo

urg

PROJ

ECT

Metropol 0RZ

32

Colour: RAL 6005 Moss green, Design: “hammer.runge design”

Measurements





Note

A polished cast aluminium bollard can show slight impurities in its surface. The surface is not as smooth as that of a stainless steel tube.

Specifications

Cylindrical bollard with a cylindrical base. Made from polished or painted cast aluminium, as required.

Mounting


Alternatives: concrete embedment or fold down

Ground rosette option

· Completely covers the ground shell, unauthorised removal is prevented by small hooks

· Material: Steel ST37, hot-dip galvanised and powder coated in bollard colour

· For surcharge, see “Bollard accessories” price list

Vertical cut

Optional rosette

Horizontal cut000.031Ground rosette

Finish


· Optional: matt polished similar to stainless steel



Fixed mounting 3p-Technology Fold down

Cast aluminium 016.001 016.020 016.005

Cast alum., matt pol. 016.101 016.120 -

Regi

ster

ed d

esig

n M

980

1747

.0

BO

LLA

RD

S

300/

500

870

85

300

870

85

98

Metropol 1RZ600 | 870

33


Measurements

Height above ground level: 600 mm | 870 mm




Note

A polished cast aluminium bollard can show slight impurities in its surface. The surface is not as smooth as that of a stainless steel tubee.

Specifications

Cylindrical bollard with a groove at the top and a cylindrical base. Made from polished or painted cast aluminium.

Mounting







Vertical cut

Optional rosette

Horizontal cut

Ground rosette 000.031

Finish






Fixed mount. 3p-Techn. 3p-High Fold down

870 mm, cast aluminium 027.001 027.020 027.030 027.005

870 mm, cast alum., matt pol. 027.101 027.120 027.130 -

600 mm, cast aluminium 027.001.060 027.020.060 - -


BO

LLA

RD

S

300/

500

600

| 870

85

300

600

| 870

85

98

Metropol 3RZ

34

Surface: polished, Design: “hammer.runge design“

Measurements





Fixed mounting 3p-Technology Fold down

Cast aluminium 010.001 010.020 010.005

Cast alum., matt pol. 010.101 010.120 -

Note


Specifications

Cylindrical bollard with three grooves and a cylindrical base. Made from polished or painted cast aluminium, as required.

Mounting







Vertical cut

Optional rosette

Horizontal cut000.031Ground rosette

Finish





Regi

ster

ed d

esig

n M

980

1747

.0

BO

LLA

RD

S

300/

500

870

85

98

870

300

85

Metropol 520 5RK

35

Finish





Specifications

Cylindrical bollard made from cast aluminium with five circumferential grooves and a conical base.

Mounting



Measurements








BO

LLA

RD

S

300/

500

75

520

300

75

120

520

Metropol 0RK870 | 1200

36

Measurements





Specifications

Cylindrical bollard with a conical base. Made from polished or painted cast aluminium, as required.

Mounting




870 mm, cast aluminium 009.001 009.020

1200 mm, cast aluminium 009.001.120 009.020.120

870 mm, cast alum., matt polished 009.101 009.120

Note


Finish





Colour: DB 703, Design: “hammer.runge design“

Regi

ster

ed d

esig

n M

980

1747

.0

BO

LLA

RD

S

300/

500

870

| 120

0

85

300

870

| 120

0

85

120

Metropol 1RK

37

Measurements





Specifications

Cylindrical bollard with a circumferential groove and a conically tapering base. Made from either polished or powder coated cast aluminium.

Mounting


Alternative: concrete embedment.



Cast aluminium, matt polished 043.101 043.120

Note


Finish







BO

LLA

RD

S

300/

500

870

85

300

870

85

120

Metropol 3RK

38

Colour: RAL 3011 Brown red, Design: “hammer.runge design“

Measurements





Specifications

Cylindrical bollard with three circumferential grooves and a conical base. Made from polished or painted cast aluminium, as required.

Mounting





Cast aluminium, matt polished 008.101 008.120

Note


Finish





Regi

ster

ed d

esig

n M

980

1747

.0

BO

LLA

RD

S

300/

500

870

85

300

870

85

120

Metropol 10RK

39

Finish




Measurements





Specifications

Cylindrical bollard with ten circumferential grooves and a conical base. Made from polished or painted cast aluminium, as required.

Mounting







BO

LLA

RD

S

300/

500

870

85

300

870

85

120

Epoq

40

Finish




Colour: DB 703

Measurements





Specifications

Bollard made from cast aluminium with a cylindrical base on a pedestal, several indentations and rings and a sphere on top.

Mounting





BO

LLA

RD

S

300/

500

90

850

300

130

90

850

Flores

41

Finish





Measurements


Diameter: 102 mm x 96 mm / 108 mm



Specifications

Oval bollard made from cast aluminum with a spiral-shaped head and a protruding vertical joint.

Mounting






BO

LLA

RD

S

300/

500

300

108

860

860

102 96

Chaussée

42

Finish




Colour: RAL 7016 Anthracite grey

Measurements





Specifications

Cylindrical cast aluminium bollard with a circumferential ring below the spherical top piece.

Mounting





BO

LLA

RD

S

300/

500

80

830

300

80

100

830

George

43

Finish




Farbe: DB 703

Measurements





Specifications

Cylindrical cast aluminium bollard with a top sphere, a peripheral ring below the top, and another ring above the pedestal.

Mounting





BO

LLA

RD

S

300/

500

82

900

300

100

82

900

Ventana

44

Finish




Colour: DB 703

Measurements


Diameter: 160 mm



Specifications

Conical cast aluminium bollard with four wing-like side parts which taper further up into eyelets. The top is domed.

Mounting





BO

LLA

RD

S

300/

500

850

160

300

850

160

Mantero

45

Finish




Colour: DB 703

Measurements





Specifications

Cylindrical bollard made from cast aluminium with two paired rings and a ring below a flattened hemisphere at the top.

Mounting





BO

LLA

RD

S

300/

500

850

85

300

850

85

140

Globo 1

46

Finish




Colour: RAL 6005 Moss green

Measurements





Specifications

Cylindrical bollard made from cast aluminium with three multi-layered rings, as well as a spherical top piece.

Mounting





BO

LLA

RD

S

300

170

890

70

300/

500

890

70

Globo 2

47

Finish




Colour: DB 703

Measurements





Specifications

Cylindrical bollard made from cast aluminium with two multi-layered rings, a cylindrical base about 100 mm high and a sphere as top piece.

Mounting





BO

LLA

RD

S

300/

500

900

80

300

900

80

140

Tube2750 | 950

48

Finish





Measurements


Diameter: 105 mm


Weight 750 mm: approx. 12 kg (for fixed mounting + 1.5 kg)

Weight 950 mm: approx. 14 kg (for fixed mounting + 1.5 kg)

Specifications

Cylindrical bollard made from cast aluminum with an ornamental ring on top and at the base. Optionally available with a domed top.

Mounting




Tube2 750, cast aluminium 017.001 017.020

Tube2 750, cast alum., arched head 017.101 017.120

Tube2 950, cast aluminium 015.001 015.020

Tube2 950, cast alum., arched head 015.101 015.120

BO

LLA

RD

S

300/

500

105

750

| 950

300

105

750

| 950

Jukos

49

Finish




Colour: DB 703

Measurements





Specifications

Cylindrical bollard made from cast aluminium with three circumferential paired rings, several vertical recesses and a flat top.

Mounting





BO

LLA

RD

S

300/

500

74

895

300

102

74

895

NU850 | 1000 | 1300

50

Finish




Colour: DB 703

Measurements

Height above ground level: 850 mm |1000 mm |1300 mm



Weight: approx. 10 kg | 11.5 kg | 14 kg (for fixed mounting + 1.5 kg)

Specifications

Smooth cylindrical bollard made from cast aluminium with a sphere on the top.

Mounting







Vertical cut

Optional rosette

Horizontal cut

Ground rosette 000.030


NU 850, cast aluminium 014.001 014.020

NU 1000, cast aluminium 014.001.100 014.020.100

NU 1300, cast aluminium 014.001.130 014.020.130

BO

LLA

RD

S

300/

500

85

850

| 100

0 | 1

300

300

85

98

850

| 100

0 | 1

300

Boulevard

51

Finish




Colour: DB 702

Measurements





Specifications

Cylindrical smooth bollard made from cast aluminium with a spherical top.

Mounting





BO

LLA

RD

S

300/

500

80

900

300

100

80

900

Limes 1

52

Finish





Measurements





Specifications

Conical bollard made from cast aluminium with two cast- in eyelets at the top.

Mounting





Regi

ster

ed d

esig

n M

980

1747

.0

BO

LLA

RD

S

300/

500

95

870

300

120

95

870

Limes 2

53

Finish




Design: “hammer.runge design”

Measurements





Specifications

Bollard made from cast aluminium tapering towards its middle.

Mounting






BO

LLA

RD

S

300/

500

95

870

300

120

95

870

Routiero870 | 1200

54

Finish





Colour: DB 703

Measurements


Diameter: 98 mm


Weight: approx. 15.8 kg | 21 kg (for fixed mounting + 1.5 kg)

Specifications

Cylindrical bollard made from cast aluminium, with a flat top.

Mounting



ALSO AVAILABLE AS A LIGHTING BOLLARD! (See p. 75)


870 mm, cast aluminium 031.001 031.020 031.030

1200 mm, cast aluminium 031.001.120 031.020.120 -

BO

LLA

RD

S

300/

500

870

| 120

0

98

300

870

| 120

0

98

Routiero 1R

55

Finish





Colour: RAL 6009 Fir green

Measurements


Diameter: 98 mm


Weight: approx. 15.5 kg (for permanent installation + 1.5 kg)

Specifications

Cylindrical cast aluminium bollard with a flat top and a cast-in circumferential groove.

Mounting




Cast aluminium 061.001 061.020 061.030

BO

LLA

RD

S

300

870

98

300/

500

870

98

Mondeal

56

Finish





Measurements


Diameter: 140 mm



Specifications

Bollard made from cast aluminium with a triangular base and a sphere set on top. The bollard tapers towards its center.

Mounting





Regi

ster

ed d

esig

n M

980

1747

.0

BO

LLA

RD

S

300/

500

820

140

300

820

140

140

Traffik

57

Finish





Colour: DB 703

Measurements





Specifications

Cylindrical bollard with a smooth surface, made from cast aluminium with a circumferential groove and a leveled sphere as top piece.

Mounting




Cast aluminium 007.001 007.020 007.030

BO

LLA

RD

S

300/

500

905

84

300

905

98

84

Belval

58

Finish




Colour: DB 703

Measurements


Diameter: 96 mm x 100 mm



Specifications

Rectangular cast aluminium bollard fitted flush with the top, with inward vertical walls.

Mounting


Alternatives: concrete embedment

Rosette 135 x 135 mm

Completely covers the ground shell

Material: ST37 steel, hot-dip galvanised and powder coated in bollard paint

Top view

Note

The floor rosette is part of the delivery (3p-Technology).



BO

LLA

RD

S

300/

500

100

860

300

96

860

Escher Turm

59

Finish




Colour: DB 703, Design: Nico Thurm

Measurements


Diameter: 102 mm/140 mm



Specifications

Cylindrical bollard made from cast aluminium with a flat top and a narrowed upper part with four intermitting, protruding rings.

Mounting





BO

LLA

RD

S

300/

500

750

102

300

750

140

102

Urbana600 | 900

60

Finish





Measurements


Diameter: 86 mm /100 mm


Weight: approx. 7.8 kg / 10.9 kg (for fixed mounting + 1.5 kg)

Specifications

Cylindrical cast aluminium bollard with a flat top by an accentuated by an elongated recess.

Mounting




Urbana 600, cast aluminium 021.001.060 021.020.060

Urbana 900, cast aluminium 021.001.090 021.020.090

BO

LLA

RD

S

300/

500

86

600

| 900

300

100

86

600

| 900

CityKing

61

Finish




Colour: DB 703

Measurements


Diameter: 185 mm



Specifications

Subdivided cast aluminium bollard on a hexagonal base, tapering towards the top and ending in an acorn-shaped figure. The six sides show rectangular, cast-in recesses.

Mounting





BO

LLA

RD

S

300

185

925

300/

500

185

925

Barena

62

Finish





Colour: RAL 5017 Traffik blue

Measurements


Diameter: 110 mm



Specifications

Cone-shaped bollard made from cast aluminium with a circumferential ring which optically separates the top from the rest of the bollard, and a second broader circumferential ring at the base.

Mounting




Cast aluminium 004.001 004.020 004.030

BO

LLA

RD

S

300/

500

820

300

820

112 112

180 180

Barena2M

63

Finish






Measurements


Diameter: 110 mm



Specifications

Slightly cone-shaped bollard made from cast aluminium with a circumferential ring which optically separates the top from the rest of the bollard, and a second broader circumferential ring at the base.

Mounting




Cast aluminium 013.001 013.020 013.030

BO

LLA

RD

S

300

820

125 125

160

300/

500

820

160

Glotero

64

Finish




Colour: DB 703

Measurements


Diameter: 61 mm / 80 mm / 170 mm



Specifications

Cylindrical bollard made from cast aluminium, with a revolving three split ring below the hemispherical top, as well as above the base.

Mounting





BO

LLA

RD

S

300/

500

870

61

300

870

170

80

61

Farus

65

Finish




Colour: DB 703

Measurements


Diameter: 140 mm



Specifications

Slightly conical bollard made from cast aluminium with several vertical recesses in the middle section. The upper section is accentuated by a circumferential ring, a smooth surface and a slightly protruding tapering top piece. The base is characterised by a smooth shell enclosed by two rings.

Mounting





BO

LLA

RD

S

300/

500

935

140

300

140

935

140

BB91

66

2014

Finish




Colour: DB 703

Measurements





Specifications

Cylindrical bollard made from cast aluminium with a two-part base and a protruding ring below the enlarged spherical head.

Mounting





BO

LLA

RD

S

104

300/

500

910

115

104

300

910

Rectana

67

2014

Finish

· Hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703



· The height can be adjusted individually (surcharge or discount)

Colour: DB 703

Measurements

Height above ground level: 900 mm | acc. to customer’s needs




Specifications

Rectangular bollard made from steel with a flat top.

Mounting




Steel ST37 065.001 065.020

900

| acc

. to

cust

ome‘

s ne

eds

900

| acc

. to

cust

omer

‘s ne

eds

BO

LLA

RD

S

300/

500

70

300

140

FB-Q

68

2014

Finish





Colour: DB 703

Colour: DB 703

1200

| ac

c. to

cus

tom

er’s

need

s

1200

| ac

c. to

cus

tom

er’s

need

s

Steel

Specifications

Square bollard made from galvanised steel with rounded corners (approx. 15 mm radius) and a flat top.

Mounting



Measurements

Height above ground level: 1200 mm | acc. to customer’s needs Diameter: 100 mm x 100 mm

Wall thickness: 6 mm

Edge radius: approx. 15 mm




Steel ST37 063.001 063.020

BO

LLA

RD

S

300/

500

100

300

100

FB-Q

69

2014

Finish




Colour: DB 703

Cast aluminium

Measurements





Specifications

Square bollard made from cast aluminium with a flat top.

Mounting





BO

LLA

RD

S

300/

500

100

1200

300

100

1200

Protector 180 · 600 | 220 · 720

70

Finish


· Stainless steel 1.4301 on request

· Slightly domed top

· 2 fixed installation versions (see illustration Fixed mounting I and II)




Colour: DB 703

Specifications

Cylindrical bollard made from steel with a slightly domed top.

Mounting


Alternative: concrete embedment (see fixed mounting I and II)

Measurements

Height above ground level: 600 mm | 720 mm | acc. to cust. needs

Diameter: 180 mm | 220 mm


Weight: approx. 13,5 | 22 kg (Fixed mounting + 1,5 kg)

CAN ALSO BE USED AS SEATING BOLLARD

600

| 720

| ac

c. to

cus

tom

ers

need

s

600

| 720

| ac

c. to

cus

tom

ers

need

s

Fixe

d m

ount

ing

I

Fixe

d m

ount

ing

II

Steel

Fixed mounting I Fixed mounting II 3p-Techn.

Protector 180 · 600 055.101 055.102 055.120

Protector 220 · 720 037.101 037.102 037.120

BO

LLA

RD

S

300

/ 500

300

180 | 220 180 | 220 180 | 220

Protector 180 · 600 | 220 · 720

71

Finish


· Flat head surface



Colour: DB 702

Measurements


Diameter: 180 mm | 220 mm


Weight: approx. 13,5 | 22 kg (Fixed mounting + 1,5 kg)

Specifications

Cylindrical bollard made from cast aluminium with a flat top.

Mounting



180 · 600 ALSO AVAILABLE AS LIGHTING BOLLARD! (See p. 76)

CAN ALSO BE USED AS SEATING BOLLARD

Fixe

d m

ount

ing

Cast aluminium


Protector 180 · 600 055.001 055.020

Protector 220 · 720 037.001 037.020

BO

LLA

RD

S

300

/ 500

180 | 220

600

| 720

300

180 | 220

600

| 720

Protector 1R 150 · 1000

72

2014

Finish




Colour: DB 703

Specifications

Cylindrical bollard made from cast aluminium with a flat top and a broad ring-shaped recess in the upper region.

Mounting



Measurements


Diameter: 150 mm


Weight: approx. 30 kg (for fixed mounting + 1,5 kg)

ALSO AVAILABLE AS LIGHTING BOLLARD! (See p. 77)



BO

LLA

RD

S

300

150

1000

10050

300

/ 500

150

1000

Protector 1R 250 · 1000

73

2014

Finish




Colour: DB 703

Measurements


Diameter: 250 mm


Weight: approx. 29 kg (for fixed mounting + 1,5 kg)

Specifications

Cylindrical bollard made from cast aluminium with a flat top and a broad ring-shaped recess in the upper region.

Mounting





BO

LLA

RD

S

10050

300

250

1000

300

/ 500

250

1000

74

LED – BLAZING ROLE MODELS

The lighting bollards Routiero LED and Protector LED are setting an example in matters of

energy consumption. With a power consumption of < 3 watts per hour, they significantly

reduce the urban electricity costs compared to conventional light sources. The low voltage

not only contributes to reduction in costs, but also minimizes the risk of electric shock in

case of complete damage.

However, this will only occur in the extreme only case as illuminated bollards with

3p-Technology can optionally be provided with a 3p-Flex junction piece, that returns

the bollard to its original position after impact.

LIGHTING BOLLARDS & FEEDER BOLLARDS

No risk of

electric shock

due to low 24V

voltage


· Significantly lower power consumption by LEDs

· Considerably longer life than conventional light sources

· LED unit is replaceable

· No risk of electric shock, since low voltage

· The junction piece can be replaced in a few minutes only

· Quick disassembly for short-term space requirements

· Ground shell can be covered therefore no risk of tripping

Routiero LED

75

Finish


· For details, see catalogue p. 12-21, p. 54 and price list

LED

ILL

UM

INA

TED

BO

LLA

RD

Colour: DB 703

Technical information

Light unit: 2 x 18 LED Multiflex ultra light

Voltage supply: 24 Volt DC

Max. current consumption: 70 mA

Total luminous flux: 116 lm

Beam angle: 120°

Light color: 6000 K (white)

Measurements


Diameter: 98 mm

Light strip height: 50 mm

Beam: 720 mm


Weight: 15.5 kg

Specifications

Fully cylindrical lighting bollard made from cast aluminium with a flat top. Fitting of two LED light strips, each with 18 LEDs. Protection class IP65 in the base area. Internal cable with connector plug, protection class IP66 / 68 and 24V low voltage.

Mounting

Only available with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point and cable guide groove, two clamping cones, a hex head bolt and a lock nut.

3p-Technology

Routiero LED, cast aluminium 210.020

300/

500

870

98

720

50

Protector LED 180 · 600

76

Finish




Light unit: 2 x 18 LED Multiflex ultra light

Voltage supply: 24 Volt DC

Max. current consumption: 150 mA

Total luminous flux: 232 lm

Beam angle: 120°

Light color: 6000 K (white)

Measurements


Diameter: 180 mm


Beam: 198 mm

Height ground shell: 300 mm or 500mm

Weight: 13.5 kg

Specifications

Fully cylindrical lighting bollard made from cast aluminium with a flat top. Fitting of two LED light strips, each with 18 LEDs. Protection class IP65 in the base area. Internal cable with connector plug, protection class IP66 / 68 and 24V low voltage.

Mounting


3p-Technology

Protector LED 180 · 600, cast aluminium 220.020

LED

ILL

UM

INA

TED

BO

LLA

RD

Colour: DB 703

180

600

300/

500

160

35

Protector LED 150 · 1000

77

Finish



Colour: DB 703

Specifications

Continuous cylindrical light bollard made from cast aluminium with a flat top. Fitting of two LED modules, each with 12 LEDs. Internal cable with connector plug, protection class IP67 and 24V low voltage.

Mounting


3p-Technology

Protector LED 150 · 1000, cast aluminium 230.020

LED

ILL

UM

INA

TED

BO

LLA

RD


Light unit: 2 x 12 LED

Voltage supply: 24 V DC

Total luminous flux: approx. 720 lm

Power: 6 W

Light emission: 360°

Light color: 3000, 4000 oder 5000 K

Maßangaben


Diameter: 150 mm


Beam: 850 mm

Height ground shell: 300 mm or 500mm

Weight: 13.5 kg

300

/ 500

150

1000

2014

Ennos

78

Measurements

Height above ground level: 620 mm | acc. to customer’s needs

Diameter: 154 mm

Weight: approx. 6 kg

Finish

· Stainless steel 1.4301 pickled and smoothed

· Stainless steel with powder coating in standard RAL colours or DB 703

· Available with satined acryl glass or clear acryl glass and two fan-shaped reflectors

· Supplied with Dulux D/E 13 Watt TC-DEL lights (26 Watt available on request with a surcharge)

· Lower fitting: Hexagon shell safety screws with pin, incl. key

· Protection class 1, protection type IP44


Specifications

Cylindrical lighting bollard made of stainless steel and satined acryl glass for permanent installation. Also available with clear acryl glass and two fan-shaped reflectors.

Mounting

Alternative: concrete embedment (not available with 3p-Technology)

Colour: DB 703, satined acryl glass

Colour: DB 703, clear acryl glass

LIG

HTI

NG

BO

LLA

RD

Acryl glass / satined Acryl glass / clear

Stainless steel 1.4301, powder coat. 201.010 201.001

Stainless steel 1.4301 200.010 200.001

620

| acc

. to

cust

omer

‘s ne

eds

620

| acc

. to

cust

omer

‘s ne

eds

160

154

160

154

79

Bollard: Protector LED 180 · 600

COLO

GNE

| Ge

rman

yPR

OJEC

T

Trash & Go

80


INTERNAL VALUE

What at first glance looks like a normal bollard reveals its

true benefit on closer inspection: a bollard with integrated

ashtray. Its simple shape makes it particularly suitable

for places often used for cigarette breaks, where waste

containers have not been installed, e.g. for aesthetic

reasons. It also fulfills its function as a bollard.

The 3p-Technology design also offers particular advantages.


· Bollard stands firmly without moving

· May be replaced in less than 3 minutes if damaged

· A simple tool is sufficient for assembly

· Only one call-out = reduced staff and vehicle costs

· Over 90 % cost reduction for maintenance

· Quick to disassemble if more space is needed at short notice

· Repair work does not have to be done on site

· Ground shell can be locked (no risk of tripping, dirt)

· Including an inner tube, which can be removed for emptying

BO

LLA

RD

ASH

TRA

Y

Trash & Go

81

Measurements


Diameter: 108 mm



Capacity: 3.5 l

Specifications

Fully cylindrical bollard ashtray with a sloping slot area. Labelling in the form of an outlined, laser-printed cigarette symbol.

Mounting



Finish


· May be unlocked for emptying using a triangular key

· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge



Colour: DB 703

THE ONLY BOLLARD ASHTRAY WITH PREDETERMINED BREAKING POINT

BO

LLA

RD

ASH

TRA

Y

Fixed mounting 3p-Techn. With flange to enable screwing

Steel ST37, galvanised / powder coated 525.001 525.020 525.040

Stainless steel 1.4301 525.011 525.022 525.140

300

1000

108

300/

500

1000

108

Basar

82

Colour: DB 703

Measurements


Diameter: 245 mm

Adapter plate: 440 x 120 mm

Weight: approx. 56.5 kg

Door height: 845 mm

Door width: 225 mm

Finish

· Hot-dip galvanised steel ST 37, cast aluminium top


· Standard design with adapter plate without electricity and water connections

· Incl. cable slide (operation possible with the flap closed)

· Equipment to enable electricity and water connections is available on request


Specifications

Cylindrical tube with two grooves at the top and a flattened upper end. Access to the internal circuit via a lockable door, including cable slide.

Mounting

Concrete embedment

FEED

ER B

OLL

AR

D

Fixed mounting

ST37 steel, top made of cast aluminium, powder coated 300.010

Regi

ster

ed d

esig

n

1335

245

285

845

Marché

83

Measurements


Diameter: 245 mm

Adapter plate: 440 x 120 mm


Door height: 845 mm

Door width: 225 mm

Specifications

Cylindrical tube with a circumferential set-on ring in the top section as well as a hemispherical upper closure. Access to the internal circuit via a lockable door, including cable slide.

Mounting

Concrete embedment

Colour: DB 703

Finish

· Hot-dip galvanised steel ST 37, cast aluminium top


· Standard design with adapter plate without electricity and water connections

· Incl. cable slide (operation possible with the flap closed)

· Equipment to enable electricity and water connections is available on request


FEED

ER B

OLL

AR

D

Fixed mounting

ST37 steel, top made of cast aluminium, powder coated 300.020

Registered design

1340

245

285

845

Since PARK BENCHES are meant to invite passers-by to rest and relax, they should be comfortable. Located in public parks or squares they add to the urban space with their aesthetic appearance. In public places, the bench is not only a resting place or viewpoint: Meeting others, communicating with people of different ages, strangers before, symbolise the function of the bench in the urban context.

ABES benches are a tasteful composition of robust steel, stainless steel and aluminium frames, which – combined with wooden, steel and stainless steel supports – make a finely designed outdoor furniture. Weatherproof materials and solid anchoring to the ground protect the benches from vandalism and can be installed all year round.

85

REST

FU

RNIT

URE

& T

ABLE

S

Flora

86

Measurements

Seat height: 450 mm

Diameter: 350 mm

Plinth diameter: 120 mm



Finish


· Other colours available on request at a surcharge


Specifications

One-piece seat bollard made from cast aluminium with small diamond-shaped apertures in the circular seat supported by a cylindrical leg, tapering slightly at the base.

Mounting

Removable with 3p-Technology, consisting of a ground shell, a junction piece with integrated breaking point, two clamping cones, a hex head bolt and a lock nut.


Colour: DB 703, Design: Charles O. Job

SEA

TIN

G B

OLL

AR

D



Regi

ster

ed d

esig

n 12

9813

300

300/

500

450

450

120

350

Medes

87

2014

Finish




· Can also be supplied in cast aluminium, if desired

· Lean-on surface made of wood

Measurements

Height: 1250 mm

Width above: 740 mm

Width below: 460 mm

Depth: 300 mm


WITH THE BOLLARD ASH TRAY “TRASH & GO” SUITABLE E.G. FOR SMOKE BREAKS (see photo)

LEA

N-O

N E

LEM

ENT

Specifications

Back to top widening lean-on element with a curved profile. The upper half is equipped with a wooden covering.

Mounting

Screw-on or concrete embedment

Colour: DB 703, Design: J.P. Gillen

For screwing For concrete embedding

Steel ST37 108.101 108.151

740

460

660

590

1250

300

Ligne

88

Colour: DB 703, Design: Stefan Wehrmann 3Dsign


Measurements

Total width: 2240 mm

Height with back rest: 823 mm

Total depth with back rest: 537 mm

Seat height: 453 mm

Weight: without b. r. approx. 22 kg with b. r. approx. 27 kg

Finish

· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703

· Seating slats made from hardwood

· The following changes are possible for an extra price: colour, length and wooden surface


Specifications

Park bench without back rest, consisting of two semi-circular steel side parts capable of holding five wooden slats ending level with the steel frames. Optionally includes a back rest consisting of three wooden slats connected to steel girder.

Mounting

Screw-on

PAR

K B

ENC

H

Steel ST37

Ligne without b. r., 1800 mm 141.001

Ligne with b. r., 1800 mm 141.101

823

453

537

430

2240

1800

Canapé

89

Finish








Measurements BENCH




Seat height: 453 mm


Measurements STOOL

Total width: 722 mm

Weight: stool without b. r. approx. 16 kg chair with b. r. approx. 20 kg

Specifications

Park bench without back rest, consisting of two steel side parts bent outwards at the top, capable of holding five wooden slats. The side parts are higher than the seating slats and serve as armrests. Optionally includes a back rest consisting of three wooden slats connected to steel girders.

Mounting

Screw-on

PAR

K B

ENC

H

Steel ST37

Canapé without b. r., 1800 mm 142.001

Canapé with b. r., 1800 mm 142.101

Canapé stool without b. r., 520 mm 142.002

Canapé chair with b. r., 520 mm 142.102

453

821

440 520

542 722

1800

2002

Cadre

90

Measurements TABLE

Lenght: 1587 mm

Width: 735 mm

Height: 750 mm Weight: approx. 31 kg

Specifications BENCH

Park bench without back rest, consisting of two perpendicular side parts made from steel profiles, which hold five wooden slats. Optionally includes a back rest consisting of three wooden slats connected to steel girders.

Mounting

Screw-on, free standing or concrete embedment

Specifications TABLE

Table consisting of two perpendicular side parts made from steel profiles and a rectangular steel frame into which eight wooden slats are set flush. The lower areas of the side parts are stabilised lengthways and diagonally by supports.

Mounting

Screw-on, free standing or concrete embedment

PAR

K B

ENC

H &

TA

BLE

750

735 1587

Cadre

91

Finish





Colour: DB 703, Design: Stefan Wehrmann 3Dsign, (Version: screw-on)

Measurements BENCH

Total width: 1890 / 1590 mm



Seat height: 453 mm


Measurements STOOL

Total width: 610 mm

Weight: without b. r. approx. 13 kg Chair with b. r. approx. 16 kg

PAR

K B

ENC

H &

TA

BLE

Steel ST37 for concrete embedding

Steel ST37 for screwing

Cadre 1800 with b.r. 143.151 143.101

Cadre 1800 w/o b. r. 143.051 143.001

Cadre 1500 with b. r. 143.153 143.103

Cadre 1500 w/o b. r. 143.053 143.003

Cadre chair with b. r. 143.152 143.102

Cadre stool w/o b. r. 143.052 143.002

Cadre table 143.550 143.500

1800/1500

823

453

823

1890/1590544 610

444 520

Cadre-T

92

Measurements TABLE

Length: 1587 mm

Width: 735 mm


Specifications BENCH

Park bench without back rest, consisting of two T-shaped side parts made from steel profiles, connected to a rectangular steel frame into which four wooden slats are set flush as a seating slat. Optionally includes a back rest consisting of three wooden slats connected to steel girders.

Mounting



Table consisting of two T-shaped side parts made from steel profiles, connected to a rectangular steel frame into which eight wooden slats are set flush. The lower areas of the side parts are stabilised lengthways by a support.

Mounting



PAR

K B

ENC

H &

TA

BLE

750

735 1587

Cadre-T

93

Finish





Measurements BENCH




Seat height: 453 mm





Cadre-T with b. r. 144.151 144.101

Cadre-T w/o b. r. 144.051 144.001

Cadre-T table 144.550 144.500

PAR

K B

ENC

H &

TA

BLE

1587

453

453

813

1527544

400

Cadre-Q

94

Finish





STO

OL

& T

AB

LE

Colour: DB 703, Design: Stefan Wehrmann 3Dsign (Version: screw-on)

Measurements STOOL

Length: 401 mm Width: 401 mm

Seat width: 342 mm

Height: 453 mm


Measurements TABLE

Length: 574 mm

Width: 574 mm


Specifications STOOL

Stool consisting of a revolving square steel frame sitting on a steel profile and into which four wooden slats are set flush.


Table consisting of an encompassing square steel frame which sits on a steel profile and into which six wooden slats are set flush.

Mounting




Cadre-Q stool 145.051 145.001

Cadre-Q table 145.550 145.500

750

574574

120 60

453

401401

120 60

Aseda

95

Finish




· The following changes are possible for an extra price: colour and wooden surface


Measurements

Width: 1700 mm

Total height: 740 mm

Total depth: 760 mm

Seat height: 420 mm


Project: Australia

Specifications

Park bench with back rest made from 140 mm wide steel profiles to hold the wooden slats. The profiles are bent and closed at the footing. The wooden slats align with the frames.

Mounting

Screw-on or free standing

Surface: stainless steel, Design: ”hammer.runge design”

PAR

K B

ENC

H

« THE ORIGINAL DESIGN»

Steel ST37 Stainless steel 1.4301

Aseda 100.002 100.003

760 1700

740

420

Limes Wood

96

Specifications

Bench system without back rest, made from at least two conical cast aluminium bollards with a diameter of 220 mm at the base. The upper end serves to support three seating slats. Each bench bollard has a groove all around the top to distinguish the bollards from the seat support.

Mounting



* Limes benches equipment(removable with 3p-Technology)

· Ground shell 300 mm (000.001)

· Junction piece (000.008)

· Clamping cone set (000.004)

· Hex head bolt and nut (000.009)


Sample configurations

Example of a single Limes bench

Example of a triangular Limes bench star-shaped

90° right-angle junction


180° series junction

Bench bollard without connection options

120° star-shaped formation

PAR

K B

ENC

H

Fixed mounting Removable with (3p-Technology)*

3 cast alum. bench bollards 3 x 131.004 3 x 131.005

1 120° star-shaped bench bollard 1 x 131.010 1 x 131.011

3 set of hardwood bench seats 3 x 132.001

Fixed mounting Removable with (3p-Technology)*

2 cast alum. bench bollards 2 x 131.004 2 x 131.005

1 set of hardwood bench seats 1 x 132.001

Regi

ster

ed d

esig

n M

980

1747

.0

Limes Wood

97

Finish



· The following changes are possible for an extra price: colour and wooden surface


Measurements

Width: 1500 mm

Depth: 340 mm

Seat height: 450 mm

Weight of the bench bollard: approx. 17 kg

Weight: approx. 48 kg (fixed mounting + 3 kg)

Bench bollard as end piece without connection options

Bench bollard as right-angle junction with an option for a 90° connection

Bench bollard as 180° series junction with an extension option

Bench bollard as 120° star-shaped junction with extension options in three directions.

PAR

K B

ENC

H

Fixed mounting Removable (3p-Technology)*

Bench bollard as endpiece 131.004 131.005

90° right-angle junction 131.006 131.007

180° series junction 131.008 131.009

120° star-shaped formation 131.010 131.011

1 set of hardwood bench seats 132.001



1500

450

340

340

170

90°

170

170

120°

Limes Ferrum

98

Colour: DB 703, seat covering: Stainless steel, Design: “hammer.runge design”

Measurements


Depth: 340 mm

Seat height: 458 mm

Weight of the bench bollard: approx. 17 kg


Specifications

Bench system without back rest, made from two conical cast aluminium bollards with a diameter of 220 mm at the base. The upper end serves to support 14 seat strips. Each bench bollard has a groove all around the top to distinguish the bollards from the seat support.

Mounting



Bench bollard as end piece without without connection options

Bench bollard as right-angle junction with an option for a 90° connection

Bench bollard as 180° series junction with an extension option

Bench bollard as 120° star-shaped junction with extension options in three directions

without back rest

PAR

K B

ENC

H

Regi

ster

ed d

esig

n M

980

1747

.0

2060

1500

458

340

340

200

90°

200 200 200

120°

120°

120°

Limes Ferrum

99

Colour: DB 703, seat covering: Stainless steel, Design: “hammer.runge design”

Specifications

Bench system with back rest, consisting of two conical cast aluminium bollards with a diameter of 220 mm at the base. The bollard head supports steel or stainless steel tubes. Each bench bollard has a circular groove separating the bollard from the head section. The back rest is connected to the rear tube of the seat support on sickle-shaped suspensions.

Mounting



Finish

· Bench bollard powder coating in standard RAL colours or DB 703



Measurements




Seat height: 458 mm

Weight of bench bollard: approx. 17 kg


with back rest

PAR

K B

ENC

H


1500528

2060

820

458

340

Limes Ferrum

100



180° series junction

Bench seat without back restBench seat with back rest

Bench bollard without connection options

120° star-shaped formation

Example of a single Limes Ferrum bench with backrest

Example of a star-shaped Limes Ferrum bench

Sample Configurations

PAR

K B

ENC

H

Fixed mounting Removable (3p-Technology) *

Bench bollard as endpiece 121.004 121.005

90° right-angle junction 121.006 121.007

180° series junction 121.008 121.009

120° star-shaped formation 121.010 121.011

Steel ST37, powder coated Stainless steel 1.4301

1 set of bench seats 121.200 121.210

Back rest 121.100 121.110

Fixed mounting Removable (3p-Techn.) *

2 cast aluminium bench bollards 2 x 121.004 2 x 121.005

1 set of bench seats (stainless steel) 1 x 121.210

Back rest (stainless steel) 1 x 121.110

Fixed mounting Removable (3p-Techn.) *

3 cast aluminium bench bollards 3 x 121.004 3 x 121.005

1 120° star-shaped bench bollard 1 x 121.010 1 x 121.011

3 sets of bench seats (stainless steel) 3 x 121.210

* Limes benches equipment(removable with 3p-Technology)

· Ground shell 300 mm (000.001)

· Junction piece (000.008)

· Clamping cone set (000.004)

· Hex head bolt and nut (000.009)Regi

ster

ed d

esig

n M

980

1747

.0

Limes Ferrum

101

PAR

K B

ENC

H


Lavario

102

Measurements

Width of straight seating unit: 970 mm

Width of straigh seating unit bent 45°: 1054 mm

Total depth of element: 420 mm

Seat height: 452 mm

Weight of seating element: approx. 10 kg

Weight of leg: approx. 4 kg

Diameter full circle 90°: interior 550 mm, exterior: 1390 mm

Diameter full circle 45°: interior 1950 mm, exterior: 2790 mm

Finish




Specifications

Cast aluminium bench system without back rest, consisting of four basic units. The system has a modular construction.

· A straight seating unit

· A seating unit bent at a 45° angle

· A seating unit bent at a 90° angle

· Base with inward-facing legs, joined to a plate at the lower end, with the upper end of the plate supporting the seating units

Mounting

Screw-on or free standing

Colour: DB 703

PAR

K B

ENC

H

1054 45°

443

420

452

941

90°970

103


Triple linear

S form with 45° units

S form with 90° units

Open ¾ circle

Semi-circle

PAR

K B

ENC

H

Cast aluminium

Seating unit, straight 104.101

Seating unit, bent 45° 104.201

Seating unit, bent 90° 104.202

Leg 104.301

Accessory for the leg as end piece 104.350

Sparta

104

Measurements


Seat depth: 340 mm

Seat height: 437 mm

Height without back rest: 576 mm



Specifications

Park bench without back rest, consisting of two U-shaped steel tube frames including mounting options for a seating slat made from several steel tube profiles. Optionally includes a back rest connected to the rear tube of the seating slat on sickle-shaped suspensions.

Mounting

Screw-on

ALSO AVAILABLE AS BENCH FOR SENIOR CITIZEN

· 10 cm higher

· Seating surface tilted slightly forward

· 10 % surcharge

PAR

K B

ENC

Hwith or without back rest

Colour: DB 703

Colour: DB 703


Sparta without back rest 107.001 107.003

Sparta with back rest 107.101 107.103

Finish





1585

576

840

1500522

340

437

Vis-à-Vis

105

2014

PAR

K B

ENC

H

with wooden support

Specifications

Park bench steel tubes made of bent and adjusted to miter with two diagonally opposite back rests. The steel frame is designed to accommodate seating supports and back rests made of wood.

Mounting

Screw-on (recommended) or free standing

Measurements


Total depth: 730 mm

Seat height: 430 mm


Weight: approx. 62,5 kg

Surface: stainless steel, Design: Charles O. Job

Surface: stainless steel, Design: Charles O. Job

Finish





Vis-à-Vis, seat sheet wood 103.102 103.103

Registered design 129813835

730

450

2380

430

WASTE CONTAINERS are essential for a well-kept urban environment. ABES’ models impress with their sophisticated functionality and attractive design, and fit perfectly into the cityscape.

The containers are robust and resistant to vandalism. They are supplied with a cover to prevent rainwater from leaking in, as well as from having unwanted household waste disposed of here. Separate internal buckets facilitate cleaning, thereby ensuring hygienic waste disposal.

WAS

TE C

ON

TAIN

ERS

LuxBin W / S

108

PRACTICAL BUT STYLISH

The LuxBin waste container combines functionality with design. Its classic cylindrical shape fits

into any cityscape.

Its strong outer shell is extremely damage resistant and also provides enough space for signs

or billboards. When combined with the optional 3p-Flex junction piece, the LuxBin is even more

resistant to everyday (traffic) inconveniences.

· Waste container stands completely firm without moving

· Thanks to its solid shell, the container generally remains undamaged after an impact

· Over 90 % cost reduction for repairs

· Junction piece can be replaced in less than 3 minutes

· Only one call-out – reduced staff and vehicle costs

· Repair work does not have to be done on site

· Quick to disassemble if more space is needed at short notice

· Ground shells can be locked to prevent risk of tripping


109

Insert junction piece Set up waste container Screw in tightly Finished

Patented system:

SIMPLE DISASSEMBLY AND ASSEMBLY THANKS TO 3P-TECHNOLOGY

Remove junction piece Lift waste container outUnscrew Finished

WA

STE

CO

NTA

INER

LuxBin W

110

Specifications

Cylindrical steel waste container with O-shaped, horizontal slot area and separate cigarette slot. The container comes with an assembled bollard.

Mounting



Measurements 50 l / 75 l

Capacity: approx. 50 l / 75 l

Height above ground with bollard: 855 mm / 910 mm

Container height: 635 mm / 690 mm

Container diameter: 350 mm / 400 mm

Weight: approx. 37 kg / 40 kg

Finish




· Cigarette slot: Stainless steel 1.4301

· Incl. internal container



WA

STE

CO

NTA

INER

Colour: DB 703

ST37 steel Stainless steel 1.4301

LuxBin W, 75 l, fixed mounting 529.001 529.011

LuxBin W, 75 l, with 3p-Techn. 529.020 529.022

LuxBin W, 50 l, fixed mounting 530.001 -

LuxBin W, 50 l, with 3p-Techn. 530.020 -

350 | 400

855

| 910

635

| 690

220

300

855

| 910

300/

500

350 | 400

LuxBin S

111

Finish




· Cigarette slot: Stainless steel 1.4301




Measurements 50 l / 75 l

Capacity: approx. 50 l / 75 l

Height above ground with bollard: 1027 mm / 1181 mm

Container height: 807 mm / 961 mm

Container diameter: 350 mm / 400 mm

Weight: approx. 37 kg / 40 kg

Specifications

Cylindrical steel waste container with O-shaped, sloping slot area and separate cigarette slot. The container comes with an assembled bollard.

Mounting



WA

STE

CO

NTA

INER


ST37 steel Stainless steel 1.4301

LuxBin S, 75 l, fixed mounting 527.001 527.011

LuxBin S, 75 l, with 3p-Techn. 527.020 527.022

LuxBin S, 50 l, fixed mounting 531.001 -

LuxBin S, 50 l, with 3p-Techn. 531.020 -

300

350 | 400

1027

| 11

81

807

| 961

220

300/

500

1027

| 11

81

350 | 400

Vidura

112

Specifications

Cylindrical waste container covered with a lid and holding a capacity of approx. 40 l, affixed to a circular post. A triangular lock must be opened to to empty the container.

Mounting

Concrete embedment or insertion into a standard ground shell (not 3p-Technology)

Measurements

Capacity: approx. 40 l

Height above ground: 1100 mm

Container diameter: 385 mm

Diameter of round post: 60,3 x 1,5 mm


Finish

· Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703





Colour: DB 703

Vidura

ST37 steel, galvanised 524.001

ST37 steel, powder coated 524.002

WA

STE

CO

NTA

INER

1100

620

385

Collector

113

Measurements

Content: approx. 50 l

Total height of the container including cover: 975 mm

Outside diameter: 420 mm


Finish



· Incl. internal container or alternatively with spikes to hold bin liners

· Cover including ashtray available as an optional accessory



Specifications

The first part of the stand-alone waste container consists of a frame made from two parallel tubes, connected by a lower and an upper rim as well as a cover, the second part consists of a cylindrical steel container to be hung into the frame. The container can be swung off the frame. The container is attached to the ground from the inside. Contents approx. 50 l

Mounting

On the ground from the interior of the container base

Design: „hammer.runge design“ and Heiko Zetzschke Colour: DB 703

Collector


Ashtray, stainless steel 1.4301, integrated in cover 500.001

WA

STE

CO

NTA

INER

975

420

Filou

114

2014

Waste container with bag dispenser (e.g. for dog waste bags)

Measurements

Capacity: approx. 35l

Width : 330 mm

Depth: 280 mm

Height: 590 mm

Height with foot: 960 mm

Bag holder capacity: 400-500 bags

Weight: approx. 13,5 kg

Finish

· Container, stainless steel 1.4301, powder coated in RAL 1021 Colza yellow and RAL 6018 Yellow green


· Post, galvanised, powder coating in standard RAL colours or DB 703 with a surcharge

· Integrated refillable bag dispenser, e.g. for dog excrements, see price list for bags

· Central locking


Specifications

Waste container of stainless steel, powder coated, with rearwards-sloping cover (no depositing possible) and integrated refillable bag dispenser at the front.

Mounting

For concrete embedding on a galvanised post (Ø approx. 81 mm)

Alternatives: · For screwing on ground

· For post/mast or wall fixing

· Removable with 3p-Technology, consisting of a post (Ø 108 mm), a ground shell, a junction piece with integrated breaking point, two clamping cones, a hex head bolt and a lock nut.

Colour: RAL 1021 Colza yellow, RAL 6018 Yellow green

Filou

Container with post, for concrete embedding 532.001

Container with post, with 3p-Technology 532.020

Container with post, for screwing 532.040

Container for post or mast fixing 532.060

Container for wall fixing 532.061

WA

STE

CO

NTA

INER

370

960

590

330

370

960

300/

500

590

280

Filou Dispenser

115

2014

Bag dispenser (e.g. for dog waste bags)

Notice

The Filou dispenser can directly be mounted next to or above the already existing waste container.

Finish

· Steel galvanised and powder coated in RAL 1021 Colza yellow


Specifications

Robust rectangular housing of galvanised steel, powder coated, with lock fixed at side and a lower opening at the front. Suspension system for refill bag on the inside of the housing.

Capacity: 400-500 bags

Mounting

Post/mast or wall fixing

· Economical

· Operational secure system with block bags that can be torn off

· No trash aperture

· Slanted cover – no item depositing

· Simple and rational servicing

· Central lock locking

· For 35 l standard trash sacks

· High resistance to vandalism

· Universal container for installation


Colour: RAL 1021 Colza yellow

Filou Dispenser

Bag dispenser, galvanized steel for post or mast fixing 533.060

Bag dispenser, galvanized steel for wall fixing 533.061

WA

STE

CO

NTA

INER

116

ABES BICYCLE STANDS are characterised by functionality and modern design, provide a firm grip and prevent the bikes from falling over, or having their wheels bent. The stands also allow bikes to be locked up securely, thereby protecting them from theft. The shape and function of the SIGNUM I bicycle stand was given the “red dot” award by the NRW Design Centre for its high design quality.

The bicycle stands offer a wide variety of setup combinations, allowing different sized groups of stands to be combined. Their sophisticated design makes the various stands attractive objects in the urban setting. The tube constructions can by fitted with a curved cover, making it harder for the bikes to roll away, which allows them to be parked without risk to other road users.

117

BICY

CLE

STA

ND

S

Gate

118

Colour: DB 703

Measurements

Width: 820 mm


Ground insert: approx. 350 mm


Finish


· Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703



Cross-section

Ground shell:

Removable model

BIC

YCLE

STA

ND

S

Specifications

U-rack made from perpendicular steel profiles. Other profile dimensions, heights and widths are available upon request at a surcharge. An assembly model is available.

Mounting

Concrete embedment or removable with ground shells

Gate



Ground shell for removable model 458.002

Cover plate for ground shell 458.003

Assembly model 458.004

860

350

820

306

106

Saloon

119


MeasurementsWidth: 3000 mm


Depth: 1590 mm


Diameter of U-rack: 51 x 2 mm

Diameter of vertical main tube: 82,5 x 2 mm

Axial distance between the U-racks: 750 mm

Axial distance between U-rack and side panel: 375 mm


Finish

· Only available in stainless steel 1.4301



Specifications

Integration of four tubes bent at a 90° angle into a horizontal support tube, which is screwed onto flush, vertical flat steel at both ends. The rear ends of the U-rack, as well as the flat steels, are fastened to the ground.

Mounting

Concrete embedment

BIC

YCLE

STA

ND

S

Saloon

Stainless steel 1.4301 460.002

900

300

30001590

United 5

120

Regi

ster

ed d

esig

n

Surface: stainless steel, Design: J.P. Gillen

Measurements

Length: 3000 mm or on demand


Wide U-rack: 900 mm


Finish





Specifications

Five U-shaped bent steel tubes with a 42.4 x 2.5 mm diameter, and welded onto two 50 x 6 mm flat bars, each with a length of 3600 mm. Perforations are provided for anchor bolts.

Mounting

Screw-on

United 5




3000 mm or on demand

BIC

YCLE

STA

ND

S

800

900

VeloPol

121

Measurements

Width: 128 mm

Height: 200 mm

Finish




Specifications

Two bent U-shaped frames made from steel tubes and welded onto a steel sheet, opening out frontwards and used to hold a bicycle tyre. Cylindrical bollard can be added with or without 3p-Technology.

Mounting



THE ONLY BICYCLE RACK WITH PREDETERMINED BREAKING POINT

Note

The bicycle stands can also be attached to other cylindrical bollards.

Colour: DB 703

ST37 steel

Velopol 1 piece (without bollard) 454.001

Velopol 2 pieces (without bollard) 454.002



BIC

YCLE

STA

ND

S

200

128 60

Indico

122

Regi

ster

ed d

esig

n

Surface: stainless steel, Design: “hammer.runge design“

Measurements

Length: 340 mm

Width: 290 mm




Cover plate: approx. 1 kg

Finish





Specifications

Frame made from bent steel tubes with a 42.4 x 2.5 mm diameter and parallel tube ends. Only one foundation is required.

Optional: convex cover plate with a 300 mm diameter

Mounting

Concrete embedment (only one foundation required)

Note

For the removable version, the cover plate is needed.

Ground shell for removable model: 456.003

Removable model

Ground shell for removable model

Cover plateIndico Cover plate (optional)

ST37 steel, galvanised 451.003 455.003

ST37 steel, powder coated 451.013 455.013

Stainless steel 1.4301 451.004 455.004

BIC

YCLE

STA

ND

S

855

300

340

290

Signum I

123

Registered design DM/050906

Surface: stainless steel, Design: “hammer.runge design“

Measurements

Length: 683 mm

Width: 224 mm



Weight: approx. 8 kg Cover plate: approx. 1 kg

Specifications

Frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required.


Mounting


Finish





Note



Removable model


Cover plate

Signum I Cover plate (optional)



Stainless steel 1.4301 450.002 455.002

BIC

YCLE

STA

ND

S

845

300

683

224

Signum II

124

Regi

ster

ed d

esig

n DM

/050

906

Finish




· See price list for details Surface: stainless steel, Design: “hammer.runge design“

Measurements

Length: 1240 mm

Width: 224 mm




Cover plate: approx. 1 kg

Specifications

Frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required.


Mounting



Signum II Cover plate (optional)



Stainless steel 1.4301 450.004 455.002

Note


Removable model


Cover plate

BIC

YCLE

STA

ND

S

845

300

1240

224

Signum | Indico

125


These examples for designing parking areas with the Signum or Indico bicycle stands may serve as inspiration for the variety of configuration options.

Square

Straight row

Diagonal 180°

Diagonal

Circle of 7 bicycle stands

Semicircle BIC

YCLE

STA

ND

S

126

BIC

YCLE

STA

ND

S

Signum I

127

Registered design DM/050906

Surface: galvanised, Design: “hammer.runge design“

MeasurementsLength: 3500 mm | acc. to customer’s needs


Fixing: Screws for ground fixation


Attached at a 90° angle to the cover plate; can be attached at a 45° angle on request

Finish





Specifications

Five frames arranged next to each other at a 45° or 90° angle to the base strip. The frames are made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, and mutually offset tube ends; all frames are welded to a convex cover plate with a width of 300 mm. Perforations are provided for anchor bolts.

Mounting

Screw-on

Length: 3500 mm | acc. to customer’s needs

5 in a row

Signum I 5 in a row




BIC

YCLE

STA

ND

S

845

128

PLANTERS

Shrubs, small trees and other plants can be planted in the “somewhat different interpretation of a plant pot”. They are available in different sizes to meet as many spatial conditions as possible.

TREE GUARDS

ABES has developed extremely solid but tasteful barriers and tree guards to protect trees and flower beds. The barriers are available in two versions: one for permanent and one for removable installation. The height of the barriers can be customised so that the objects can adapt to the respective environment.

129

PLA

NTE

RS

| TR

EE G

UA

RD

S

Gütersloh

130

Finish

· Stainless steel 1.4301

· Stainless steel 1.4301 with powder coating in standard RAL colours or DB 703



Specifications

Plant pot with curved sides that taper at both ends. The base has apertures which may be sealed with a perforated plate cover. The container stands on rectangular tubes which serve as supports for hoisting equipment. The apertures of the tubes can be covered with removable caps.

Mounting

Free standing element

PLA

NTE

R

Colour: DB 703, Design: Doris Herrmann

Colour: DB 703, Design: Doris Herrmann

Stainless steel 1.4301, powder c. Stainless steel 1.4301

Gütersloh S 710.002 710.003

Gütersloh M 711.002 711.003

Gütersloh L 712.002 712.003

Gütersloh XL 713.002 713.003

390

/ 490

110

131

Measurements S

Width: 691mm (widest point)

Length: 1200 mm

Height of side wall: 390 mm

Height of container, incl. base: 500 mm

Volume: approx. 210 L

Weight when empty: approx. 65 kg

Measurements M

Width: 650 mm (widest point)

Length: 1500 mm





Measurements L


Length: 1800 mm





Measurements XL


Length: 2000 mm





PLA

NTE

R

1200

1500

1800

2000

691

650

750

801

Humus Q | R

132

Finish

· Stainless steel 1.4301

· Stainless steel 1.4301 with powder coating in standard RAL colours or DB 703 iron mica

· Containers are also available without legs and with welded frames for chain suspension upon request


Specifications

Plant pot with square or oblong basic shape and vertical side walls. Openings are countersunk in the base and closed with a perforated sheet metal cover. The container stands on four individual feet made from square tubes.

Mounting

Free standing element

Measurements Humus R

Width: 700 mm

Length: 1000 mm

Side wall height: 700 mm

Height of container incl. base: approx. 800 mm


Measurements Humus Q

Width: 700 mm

Length: 700 mm

Side wall height: 700 mm

Height of container incl. base: approx. 800 mm


Colour: DB 703

PLA

NTE

R

Stainless steel 1.4301, powder coated Stainless steel 1.4301

Humus Q 720.002 720.003

Humus R 721.002 721.003

700

100

700

700

700

100

1000

700

Barrigo

133

Registered design

Specifications

A bent, U-shaped steel frame with a diameter of 48.3 x 2.6 mm. Three foundations are required.

Optional: a ground shell for the removable model

Mounting

Concrete embedment or inserted into a standard ground shell (not available with 3p-Technology)

Finish


· Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703



Measurements

Width: 1200 mm

Length: 1200 mm

Height above ground: on demand



Surface: stainless steel, Design: J.P. Gillen


TREE

GU

AR

D

Barrigo




varia

ble

350

1200

1200

ABES

mee

ts A

rt.

ABES meets Art.

134

MODEL

Material: Cast aluminium or steel

Motive and coating: As arranged with the artist

Fixing: Either for site fixing or for removing with

3p-Technology consisting of a ground shell, a

junction piece with integrated predetermined

breaking point, two clamping cones, one

hexagon bolt and a stop nut.

Unsuitable for outside use or only with

corresponding measures.

The ABES meets Art. project is not limited

to bollards but can also be extended

to other ABES products.

Artistic spontaneity and colourful lightheartedness in

public spaces are two features that are not often noticed in

connection with city furniture.

With this action we want to show that this doesn’t need to be

the case. The artist Julia Dylla-Lauer from Trier has designed

three bollards from our range according to her own ideas.

The results are remarkable small pieces of art. Absolutely

individual and unique.

The models shown here can be obtained for 720.00 EUR each

including the 3p-Technology.

Miss Julia Dylla-Lauer will be happy to carry out further

assignments. Just contact us!

The three Art bollards shown are unique.

ABES

mee

ts A

rt.

136

MODEL ITEM PAGE

PAGE

Pr

ice li

st

Airport Bollard 28 4

Aseda Park bench 95 12

Avenue Bollard 29 4

Barena Bollard 62 4

Barena2M Bollard 63 4

Barrigo Tree Guard 133 19

Basar Feeder Bollard 82 10

BB91 Bollard 66 4

Belval Bollard 58 4

Boulevard Bollard 51 4

Filou Waste container 114 16

Filou Dispenser Waste container 115 17

Cadre Park bench 90 12

Cadre-Q Park bench 94 13

Cadre-T Park bench 92 13

Canapé Park bench 89 13

Chaussée Bollard 42 4

CityKing Bollard 61 4

Classic Bollard 25 4

Collector Waste container 113 16

Corniche Bollard 22 5

Ennos Lighting bollard 78 10

Epoq Bollard 40 5

Escher Turm Bollard 59 5

Farus Bollard 65 5

FB-Q Cast aluminium Bollard 69 5

FB-Q Steel Bollard 68 5

Flora Seating bollard 86 13

Flores Bollard 41 5

Frontera Bollard 24 5

Gate Bicycle Stands 118 17

George Bollard 43 5

Globo 1 Bollard 46 5

Globo 2 Bollard 47 5

Glotero Bollard 64 5

Gütersloh Planter 130 18

Humus Q | R Planter 132 19

Indico Bicycle Stands 122 17

Jukos Bollard 49 6

Lavario Park bench 102 13

Ligne Park bench 88 14

Limes 1 Bollard 52 6

Limes 2 Bollard 53 6

Limes Ferrum with b. r. Park bench 99 14

Limes Ferrum without b. r. Park bench 98 14

MODEL ITEM PAGE

PAGE

Pr

ice li

st

Limes Wood Park bench 96 15

LuxBin S Waste container 111 16

LuxBin W Waste container 110 16

Mantero Bollard 45 6

Marché Feeder Bollard 83 10

Medes Lean-on element 87 15

Metropol 0RK 870 | 1200 Bollard 36 6

Metropol 0RZ Bollard 32 6

Metropol 10RK Bollard 39 6


Metropol 1RZ 600 | 870 Bollard 33 6/7


Metropol 3RZ Bollard 34 7

Metropol 520 5RK Bollard 35 7

Mister N Bollard 23 7

Mondeal Bollard 56 7

NU 850 | 1000 | 1300 Bollard 50 7

Protector 1R 150 · 1000 Bollard 72 8

Protector 1R 250 · 1000 Bollard 73 8

Protector AG 180 · 600 | 220 · 720 Bollard 71 8

Protector LED 150 · 1000 Lighting bollard 77 10

Protector LED 180 · 600 Lighting bollard 76 10

Protector ST 180 · 600 | 220 · 720 Bollard 70 8

Rectana Bollard 67 8

Routiero 870 | 1200 Bollard 54 8

Routiero 1R Bollard 55 8

Routiero LED Lighting bollard 75 10

Rubber Duck 600 Bollard 30 8

Saloon Bicycle Stands 119 18

Sentinel 1000 | 1200 Bollard 26 8/9

Sentinel 1R Bollard 27 9

Signum I Bicycle Stands 123 17

Signum I 5 in a row Bicycle Stands 127 17

Signum II Bicycle Stands 124 17

Sparta Park bench 104 15

Traffik Bollard 57 9

Trash & Go Bollard ashtray 80 10

Tube2 750 | 950 Bollard 48 9

United 5 Bicycle Stands 120 18

Urbana 600 | 900 Bollard 60 9

VeloPol Bicycle Stands 121 18

Ventana Bollard 44 9

Vidura Waste container 112 16

Vis-à-Vis with wooden support Park bench 105 15

Components of the 3p-Technology Accessory 12-15 11/12

PRO

DU

CT

OV

ERV

IEW

137

Parc bench: Aseda | Bollard: Metropol 10RK | Waste container: Collector

PROJ

ECT

BERD

ORF

| Lu

xem

bour

g

138

CLIENT PROJECT PRODUCTS LAST

City of Köln Metropolitan area (since 2007) Bollard with 3p-Technoloy for litter bin “Cologne” and Protector LED 180 · 600

2014

City of Saarbrücken Metropolitan area (since 2004) Metropol 1RZ, Ventana, Sentinel 2014

City of Berlin Metropolitan area Metropol, Barena, Limes 1, Signum I, Globo 2, Jukos, Routiero

2014

City of Gelsenkirchen Horster Street Routiero 1R 2014

City of Frankfurt Airport, Skyline Plaza Metropol 1RK, Metropol 1RZ, Gate 2014

City of Göttingen Metrop. area, university, senior citizens‘ residential home

Avenue, Belval, Sentinel, Metropol 1RZ2014

City of Lübeck Metrop. area, Hanseschule, Untertrave Barena 2M, Metropol 1RZ, Sentinel 2014

City of München Metrop. area, Messe Riem, Balanstr., Schwere-Reiter-Str., Hirschgarten a. o.

Sentinel, Routiero, Globo 2, Signum I, Metropol 3RK, Ennos

2014

City of Münster Metropolitan area Metropol, Traffik, Signum I, Trash & Go 2014

City of Oberhausen Metropolitan area Belval, Metropol 1RK 2014

City of Dortmund Hörde (urban redevelopment) Sentinel 2013

City of Hamburg Centre, metrop. area, Harburg, Rothenburgsort, Weltquartier, Airport a.o.

Metropol, Globo 2, Sentinel, Signum I + II, Airport, Sentinel etc.

2013

City of Speyer Multi-storey car park, Berliner Place Belval, Metropol 1RZ 2013

City of Regensburg Metropolitan area, Zuckerfabrik Routiero, Metropol 0RZ 2013

City of Stuttgart Metropolitan area Routiero 1R 2013

Sylt Hörnum, Rantum, Westerland u. a. Limes Ferrum, Signum I, Limes 1, Globo 1 2012

Ville d‘Esch-sur-Alzette Metropolitan area, Fonds Belval, Rockhal Escher Turm, Barrigo III, United 5, Signum I, Belval, Protector 220 ·720

2014

Comm. de Hesperange Town area Metropol 3RZ/3RK, Routiero, Vidura 2014

Commune de Mersch Town area Metropol 3RK, Avenue, Marché, Basar, Limes, Lavario, Frontera

2014

Commune de Pétange Town area Metropol, Signum, Vidura 2014

Ville de Differdange Metropolitan area Metropol, Vidura 2014

Comm. de Sandweiler Town area Metropol 3RK, Routiero LED, LuxBin etc. 2014

Comm. de Walferdange Town area, University, Shopping Center Protector, Sentinel, Limes 2, Signum I etc. 2014

Ville de Luxemburg Kirchberg, Metropolitan area Metropol, Limes, Signum I + II V2A 2013

Cactus S. A. Belle Etoile, Echternach, Mersch, Kayl, Redange, Remich, Windhof a. o.

Metropol 10RK, Signum I2013

GERMANY AND LUXEMBOURG

Projects | SELECTION

REF

EREN

CES

139

CLIENT PROJECT PRODUCTS SINCE

Belgium Deinze a. o. Limes 1, Metropol etc. 2002

Denmark Different cities Signum I, Metropol 0RK, Avenue 2004

Finland Different cities Aseda, Metropol 10RK, Signum I, Indico 2005

France Biarritz, Bouchain, Bretignolles-sur-Mer, Castillon la Bataille, Charleville-Mézières, Côte d’Azur, Dôle, Lyon, Metz, Nicolas les Arras, Pons, Sedan, Soteville-le-Rouen, St.-Nicolas-les-Arras, Toulouse, a. o.

Complete product range

2004

Great Britain London, Manchester (St. Peters Square) a. o. Aseda, Lavario, Avenue, Metropol, Protector (LED) 150 ·1000 / 250 ·1000 etc.

2005

Italy Various cities in South Tyrol Indico, Traffik, Metropol 2006

Netherlands Different cities Torento, Collector II, Limes 1, Signum I etc. 2002

Austria Amstetten, Bruck/Mur, Krems, Salzburg, Wien, Wolfsberg u. a. m.

Complete product range2003

Portugal Lissabon a. o. Complete product range 2008

Switzerland Amriswil, Chur, La Chaux-de-Fonds, Laufen-burg, Maienfeld, Neuchâtel, Nyon, Simplon, Solothurn, Unterägeri, Wattwil, Zürich a. o.


Spain Different cities Limes Ferrum, Indico, Signum etc. 2010

SALES THROUGH RESELLERS

EUROPE

CLIENT PROJECT PRODUCTS SINCE

Australia Bunbury, Darwin, Ellenbrook, Leighton Beach, Perth, Port Hedland, Scarborough


Hong Kong Classic 2008

New Zealand Auckland Metropol 0RK, Lavario 2007

Singapore Limes Ferrum, Limes 2009

U. A. E. Al Bustan Vis-à-vis V2A, Collector II V2A 2010

WORLDWIDE

Further references can be found on www.abes-online.com/projekteASK FOR REFERENCES IN YOUR AREA!

REF

EREN

CES

140

Projects | SELECTION

LUXEMBURG-KIRCHBERG

LUXEMBURG-KIRCHBERG

EHLANGEAUSTRALIENSYLT

ESCH-BELVAL

141

SANDWEILERMERSCH

BERDORFMERSCH

SYLT

REMSHALDEN

HWS-mobil!

142

THE MOBILE FLOOD-PREVENTION SYSTEM

Fierce storms and heavy rain are becoming increasingly common,

resulting in millions of euros of material damage. It is to be feared

that climate change will cause more and more extreme weather

events.

HWS-mobil! is a mobile flood-prevention system developed as part

of a research project in co-operation with the Water Management

and Environmental Research Institute (fwu) at the University of

Siegen. Working in an opposite way to a barrage, the baffle plates

curve “away from the water” and are exposed to pressure by the

rising flood waters. As sheet steel absorbs tractive forces very well,

the protective walls, which are “just” 1 millimetres thick, provide

reliable protection for damming heights of up to 1.5 metres.

HWS-mobil! is easy to transport, assemble/disassemble, to clean

and to store. Only two seals are required to minimise the number

of unsealed areas: One on the underside of the baffle plate, and

another vertical seal per support.

The system is designed as protection for buildings/objects (doors,

gates, driveways) as well as linear protection (company premises,

dyke raising etc.). It also offers the unique option of mounting

municipal furniture items onto the ground shells.

Ground shells are permanently embedded into concrete to hold

the supports, while a similar permanently embedded wall profile

has been developed for wall connections. Wall modules, support

ASSEMBLY & STORAGE

USAGE

AREAS OF APPLICATION

COMPATIBILITY WITH ABES PRODUCTS

· Building projection: Protection of doors, gates and driveways

· Linear protection of company premises and private complexes

· Linear protection in the event of dyke raising

Thanks to 3p-Technology, the ground shells can be used to mount benches, waste containers and other pieces of furniture, while not looking like eyesores during flood-free times.

· Very durable due to steel components

· Very good density; only two seals per field

· Effective protection against vandalism

· Personalised solutions possible

· Quick assembly/disassembly using a single tool

· Only two people required for setup

· Easy to use (no component weighs more than 20 kg)

· Reusable and long-lasting due to hot-dip galvanising

· Compact for storage


INNOVATION AUS STAHL

IN STEEL

EN ACIER

modules, slide-in modules and baffle plates are components which

are only mounted in the event of a flood. Using the tried and tested

ABES 3p-Technology, the support modules are friction-fit into the

ground shells in just a few minutes. Affixing the wall modules to

the wall profiles is just as easy.

The baffle plates are edged on the side and are inserted into the

holders of the wall and support modules. Finally, the slide-in

modules, with integrated vertical seal, are slid in from the top. The

system is sealed by screwing in the slide-in modules.

A support protection module is available as an option, and is

generally recommended for damming heights of 0.70 metres

onwards. It only takes about one minute to assemble.

Erecting HWS-mobil! takes a fraction of the time required to setup

a sandbag barrier. Two people can set up 100 running metres of

flood protection in six to eight hours. Many more assistants are

needed to erect and dismantle sandbag barriers.

It is also important to note that, unlike sandbag barriers, there is no

question of expensive decontamination after a flood, just a simple

cleaning of the individual elements.

Detailed installation instructions ensure fast, simple assembly.

Once mounted carefully, HWS-mobil! can reliably protect people

and property assets.

HWS - mobile is compatible with all ABES 3p technology products

HWS-MOBIL! INDIVIDUAL PARTSPermanently embedded parts Temporarily fitted parts

MORE INFORMATION CAN BE FOUND IN OUR PRODUCT BROCHURE, WHICH WE WILL GLADLY SEND YOU FREE OF CHARGE, OR VISIT www.howatec-online.com

Optional

Wall module

Support module

Slide-in module

Baffle plate

Support protection module

Ground shell

Wall connection profile

C O M P A T I B L E

HWS-mobil!

K O M P A T I B E L

3 4 5 6

3

4

5

6

7

7

1 2

1

2

STABIL | LEICHT | DICHT

SOLID | LIGHTWEIGHT | LEAK-PROOF

SOLIDE | LÉGER | IMPERMÉABLE

143

144

PERT

H |

Aust

ralia

PROJ

ECT

All presentations and descriptions in the brochure, as well as the

product models and properties, including the 3p-Technology, are

given for information purposes only.

Due to the unpredictability of daily usage, no guarantee can be

given for the described product properties. All products have

been carefully developed for a tough everyday use and are built

accordingly robust.

We reserve the right to make technical or optical amendments

without prior notice at any given time or when we believe

this serves the further development and improvement of our

products.

“ABES” and “3p-Technology” are registered word and figurative

trade marks.

Catalogue design: Iris Kaschl and Doris Schäfer

Photography: Kai Funk, Sebastian Gross and Guy Wolff

Printed: July 2014

ABES S.à r.l.50, rue des Prés · L-7333 Steinsel

Tél.: (+352) 26 33 09-01Fax: (+352) 26 33 09-03

E-Mail: [email protected]

www.abes-online.com

ABES Public Design | Catalogue 2014 | English

Documents

Transcript of ABES Public Design | Catalogue 2014 | English