Abbots Manor - Planning Document - City of Westminster · OLT cabinet to be placed in the basment...

Reference Planning Document

Site Abbots Manor EstateWork Address Pimlico, London SW1V 4JP

Plan

Commmunity Fibre propose to install fibre network cables throughout the Abbots Manor Estate allowing residents and businesses to connect to Community Fibres superfast full fibre broadband.

*

The Abbots Manor Estate is made up of 11 blocks including, the majority of which are low level blocks consisting of 6 floors. The estate has one high rise tower block containing 22 floors.

*

The Abbots Manor Estate has 411 residential properties as well as 9 other units containing offices, a nursery and a community hall among other uses. Community Fibre wish to include all within our fibre network build.

*

In order to provide the residents and commercial units with Community Fibre full fibre broadband, Community Fibre will need to install some equipment internally and externally throughout the estate in a similar manner to other telecomms providers on site.

*

During the planning stage Community Fibre have identified the most logical places to install such equipment to ensure the build of the network is as safe as possible, causes the least amount of disruption to the estate and kept out of sight where possible.

*

The build is overseen by a member of the Community Fibre delivery team allowing a channel of communication aswell as adhering to strict health and safety guidelines at all times. Community Fibre will complete a sign off once works complete to ensure quality.

Originator : Luke BaldwinVerified by: Zoltan Kovacs

Contact Number : 07515434554

Issue Date : 05/06/2018

2 Eastbourne Terrace, LondonW2 6LGRegistration No: 7413288

F/G

Once installation has been booked a faceplate will have to be installed within the customers property, a small white socket to splice fibre to then run a fibre patchcord for the router. Router shown in G is the equipment we install at installation.



A

Aux Joint to be installed in the Glastonbury House basement allowing fibres to be distributed from OLT and run throughout the estate to all blocks.

B/C

Splitters used to split 1/2 or 3 distribution fibres to up to 96 times drop cables to then run to each property, splitters to be installed either on the rooftop or within riser cupboards.

D

OLT cabinet to be installed within the Glastonbury House basement in order to provide signal to each of the routers to be installed in the Abbots Manor Estate.

E

Distribution joint, allowing Community Fibre to distribute fibres around the estate. To be installed on rooftop if required.

K/L

Specification of fibre Community Fibre will use within the Abbots Manor Estate.

Originator : PlannerVerified by: Zoltan Kovacs

Contact Number : 07477 833 043

Issue Date : 05/06/2018


DDimensions 1350 mm x 850 mm x 450 mm (H x W x D)Maximum weight (without/with storage batteries)185 kg/325 kgOperating environment-33℃ to +45℃ (solar radiation 1120 W/m²)

B

L

OPTICAL LINE TERMINATION CABINET - [OLT]

MEDIUM SPLITTER BOX

Weight, size and colorWeight ............................3.7 kgDimensions (HxWxD) .....68 x 275 x 114

LARGE SPLITTER BOX

Weight, size and colorWeight .........................7 kgDimensions (HxWxD) ...500 x 376 x

A

C

E

G

DROP FIBRE

F

Distribution JOINT

Fusion splices ........ .......... 48Mechanical splices ...........24Weight........................2540GSize (mm)........213 x 240 x 73

ROUTER

K

A 5m loop of cable will be secured outside each property for the connection of broadband services when ordered by the tenant.The fibre optic cable comes in various colours and will be matched as best as possible to blend in with the existing building exterior.



A

In accordance with BS5839 all cable routes within common areas must perform to a minimum of part 1:clause 26.2(f). Regulation 521.11 within BS7671 2008 Amedment 3 states in Chapter 52 (Selection and Erection of Wiring Systems)

that Wiring systems in escape routes shall be supported in such a way that they will not be liable to premature collapse in the event of fire. The cables must be secured at appropriate intervals within the trunking and on walls with fire clips.

The fire clips will be secured to the wall using masonry screws and gas fired nails that have a 2 hour fire-resistant certification.

B

Externally installed customer drop cables will be attached to a stainless steel galvanised catenary cable that is fitted to the outside of the building with eyebolts. The cables will be secured to the catenary wire.

C

All new drill holes required to pull cables through to different levels of the building or between fire compartmented areas must be firestopped with a suitable approved intumescent material. Any existing firestop that is disturbed during the installation will be replaced by material that meets the current standard.



Issue Date : 05/06/2018


Fireclips and Fixings

External Cable Management

Fire Stopping

*

Community Fibre propose to install splitters in the internal risers and run the fibre cables through the riser secured to the existing cable tray. Fibre to run through existing holes between floors (Fire seal to broken through and replaced and then certified)

*

Fibre will then run out of the risers into the false ceiling. Fibre to be secured to the wall using fire clips. 5m fibre coils to be left in the false ceiling until an install has been booked.



Issue Date : 05/06/2018



Plan

OLT cabinet to be placed in the basment of Glastonbury House. OLT to be powered from spare socket in the fuse board within basement electrical room. A meter will be fitted to ensure Commuity Fibres power consumption is calculated correctly.

*

Electrical supply to be tested and certificated for health and safety once installed. Fibre feed cable required for OLT will run through from existing ducts in the street to the basement and then to the OLT. New cable trays to be installed to keep cables tidy.

*

Once OLT has been installed fibre distribution cables can be run to serve all blocks within the Abbots Manor Estate. Fibre cables to run either in cable trays or fixed to the wall neatly within the basement area of Glastonbury House.

*

Community Fibre will run fibre cables and the power cable through existing holes where possible replacing or installing fire seals as required. (Fire seals are tested by a 3rd party contractor after install).




1

Workpoint shows the new OLT location within the basement of Glastonbury House.

2

Workpoint shows the fibre running through the riser with a splitter installed.

3

Workpoint showing the fibre cables running out from the splitter within the riser into the false ceiling, once the fibre is in the false ceiling it can be clipped to the side of the wall with a fire clip and run around to each individual property with a coil left outside.

4

Fibre cables to run around the false celing fire clipped to the wall with a coil to be left outside each property for Community Fibre engineers once fibre installation has been booked.



Issue Date : 05/06/2018


1 2

3 4

9

Overview of fibre routes on Tintern House.



5

Distribution fibre cables to be run from the aux joint in the Glastonbury House basement location, through Qpark and through existing ducting to reach Tintern House. At Tintern House fibre cable is to run up to rooftop where a distribution joint and splitter need to be installed.

6

Once the joint and splitter has been installed fibre drop cables will run through existing cable trays on the rooftop to the drop locations where Community Fibre plan to run the cables down in a bundle and neatly leave 5m coils at each property fibre to be fixed to wall via catenary fibre.

7

Distribution fibre cable to run from the joint on Tintern across to the location shown on Dryburgh House where another splitter box is required. Fibre cables to be run within galvanised cable tray.

8

Once the splitter has been installed individual fibre cables will be run again within cable trays to the drop locations where the fibre cables will be run down the side of the building in small bundles with neat 5m coils to be left at each properties living room window for later installation.

10

Overview of fibre routes on Dryburgh House.



Issue Date : 05/06/2018


5 6

7 8

9 10

15

Overview of fibre routes on Sherbourne House.



11

Distribution fibre cable to be run from Aux Joint location within Glastonbury House basement area and then through the Qpark. Cable will then run through a new section of civils and up to the roof of Sherbourne House. On Sherbourne House rooftop a splitter is required at either end of the block.

12

Fibre cabling to run along the roof within fibre trays. Once the splitters have been installed fibres to be run in the traywork and over the side of the block as shown fixed to the wall with catenary wire in a neat bundle with 5m fibre coils left at each individual properties living room window.

13

Distribution cable to be run up to rooftop via catenary wire, once on the roof fibre is to be run to outbuilding via cable trays and a splitter is to be installed in location shown.

14

Once splitter has been installed fibre drop cables are to be run to each individual property in the same manner. Fibre cables to run through traywork on roof and then over the side where the cables will run neatly in a bundle and a 5m coil will be left neatly at each individual unit.

16

Overview of fibre routes on Furness House.



Issue Date : 05/06/2018


11 12

13 14

15 16

Splitters will all be located at rooftop level on all of the above blocks, fibre will be run on rooftop within a galvanised cable tray.

Fibre cables will be run as shown in this workpoint, fibres will be run in a neat bundle fixed to the wall with catenary wire. A 5m fibre coil will be left at the balcony of each property.

Birds eye view of fibre routes for Buckland, Flaxland, Kirkstall, Melrose, Fonthill and Eversham Houses.

Overview of fibre route on Buckland, Flaxland, Kirkstall, Melrose, Fonthill and Eversham Houses.



Note

Buckland House, Flaxland House, Kirkstall House, Melrose House, Fonthill House and Eversham House all consist of 12 properties and are all built the same.

17

20

19

18



Issue Date : 05/06/2018


17 18

19 20

Abbots Manor - Planning Document - City of Westminster · OLT cabinet to be placed in the basment...

Documents

Transcript of Abbots Manor - Planning Document - City of Westminster · OLT cabinet to be placed in the basment...