AB Pinnacle Stone Pvt Ltd -- INDIA
8
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095 Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected] Figure 1 AB PINNACLE STONE PRIVATE LIMITED
-
Upload
ankita-rajgarhia -
Category
Documents
-
view
208 -
download
6
Transcript of AB Pinnacle Stone Pvt Ltd -- INDIA
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095
Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected]
Figure 1
AB PINNACLE STONE PRIVATE LIMITED
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095
Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected]
PROCESS ROUTE
WIRESAW
ROUGH BLOCK SIDES ARE
SAWN HERE TO MAKE THE
SIDES UNIFORM BEFORE
LOADING THEM TO THE
GANGSAW TROLLEY.
WE HAVE TWO WIRESAWS
FROM METCONS
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095
Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected]
BLOCK SETTING
BLOCKS ARE SET USING CEMENT
AND CONCRETE ON THE
TROLLEYS AFTER SAWING THE
SIDES.
THESE TROLLEYS ARE THEN
MOVED INTO THE SAWING AREA
IN THE GANGSAW MACHINES
WHERE A NUMBER OF BLADES
ARE SET ON TOP OF IT TO CUT
THE BLOCK INTO SLABS
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095
Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected]
GANGSAWS
WE HAVE TWO JUMBO SIZE GANGSAW
MACHINES IMPORTED FROM GASPARI
MENOTTI, ITALY
THE ROUGH BLOCKS ARE CUT INTO
SLABS HERE. A MIXTURE OF HYDRATE
LIME AND HIGH GRADE STEEL GRIT IS
USED FOR CUTTING PURPOSE
OUR PLANT CAPACITY IS TO PROCESS
ABOUT 1 MILLION SQUARE FEET OF
GRANITE SLABS PER ANNUM
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095
Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected]
GRINDING
AFTER SAWING, SLABS ARE MOVED
TO THE AUTOMATIC POLISHING
LINE FOR LEVELLING THE SURFACE.
THIS IS DONE BY USING DIAMOND
ABRASIVE BRICKS.
WE HAVE IMPORTED OUR 20 HEAD
AUTOMATIC POLISHING LINE FROM
GASPARI MENOTTI, ITALY
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095
Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected]
RESIN TREATMENT
AFTER GRINDING, SLABS
ARE MOVED TO THE RESIN
TREATMENT MACHINE,
WHERE EPOXY AND
HARDENER ARE APPLIED
ON THE TOP SURFACE OF
THE SLABS. THE EPOXY IS
DRIED IN A CHAMBER
WHERE TEMPERATURE IS
BETWEEN 50-60 DEGREES
CENTIGRADE
OUR RESIN LINE MACHINE
IS ALSO FROM GASPARI
MENOTTI, ITALY
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095
Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected]
POLISHING
SLABS ARE MOVED BACK TO
THE AUTOMATIC POLISHING
LINE ABOUT 24 HOURS AFTER
BEING TREATED WITH THE
EPOXY
TOP SURFACE IS POLISHED
HERE FOR DESIRED GLOSSY
FINISH
A B PINNACLE STONE PVT. LTD Ground Floor, No.346/2, 1st Main, 8th Block Koramangala, Bangalore - 560095
Tel: +91 80 25704506/ 07 FAX :+91 80 25704508 Email:[email protected]
PACKING
SLABS ARE MOVED TO THE FINISHED GOODS
AREA AFTER POLISHING WHERE WE PACK
THEM INTO WOODEN CARATES OF 8 TO 10
SLABS
THESE CRATES ARE THEN LOADED INTO THE
CONTAINER IN THE CONTAINER LOADING
AREA
