Aaaa_Mezz to Interconnect Mapping
Transcript of Aaaa_Mezz to Interconnect Mapping
-
8/16/2019 Aaaa_Mezz to Interconnect Mapping
1/2
Mapping half-height server blades
he following table lists the available configurations for half-eight devices installed in device bay N (116).
Connection Port number Connects tointerconnectbay/port
Comments
EmbeddedNIC
NIC 1
NIC 2
1/Port N
2/Port N
One or twosingle-wideEthernetinterconnectmodules
Mezzanineslot 11x or2x cards
1x/2x port 1
1x/2x port 2
3/Port N
4/Port N
One single-wideinterconnectmodule
Four portcards willonly connectthe first twoports.
Connection Port number Connects tointerconnectbay/port
Comments
Mezzanineslot 14xcards
4x port 1 3/Port N One doubwideinterconnemodule
Only portof a two p
card will connected
Mezzanineslot 21x or2x cards
1x/2x port 1
1x/2x port 2
1x/2x port 3
1x/2x port 4
5 / port N
6 / port N
7 / port N
8 / port N
One or twosingle-wideinterconnectmodules
Mezzanineslot 24xcards
4x port 1
4x port 2
5/Port N
7/Port N
One or twodouble-wideinterconnectmodules
* Connectivity to interconnect bays 7 and 8 is only available wi
four-port mezzanine cards or port 2 of 4x card in Mezzanine slo
Mapping full-height server blades
The following table lists the available configurations for fuheight devices installed in device bay N (18).
-
8/16/2019 Aaaa_Mezz to Interconnect Mapping
2/2
Connection Port number Connects tointerconnectbay/port
Comments
NIC NIC 1
NIC 2
NIC 3
NIC 4
1/Port N+8
2/Port N+8
1/Port N
2/Port N
One or twosingle-wideEthernetinterconnectmodules
Mezzanine
slot 1
1x or2x cards
1x/2x port 1
1x/2x port 2
1x/2x port 3
1x/2x port 4
3/Port N
4/Port N
3/Port N+8
4/Port N+8
One or two
single-wideinterconnectmodules
Mezzanineslot 14xcards
4x port 1 3/Port N One double-wideinterconnectmodule
Only port 1of a two portcard will beconnected
Mezzanineslot 21x or2x cards
1x/2x port 1
1x/2x port 2
1x/2x port 3
1x/2x port 4
5/Port N
6/Port N
7/Port N+8
8/Port N+8
Up to four single-wide interconnectmodules
Mezzanineslot 24xcards
4x port 1
4x port 2
5/Port N
7/Port N
One or twodouble-wideinterconnectmodules
Mezzanineslot 31x or2x cards
1x/2x port 1
1x/2x port 2
1x/2x port 31x/2x port 4
7/Port N
8/Port N
5/Port N+86/Port N+8
Up to four single-wide interconnectmodules
Mezzanineslot 34xcards
4x port 1
4x port 2
5/Port N
7/Port N
One or twodouble-wideinterconnectmodules
Connectivity to interconnect bays 7 and 8 is only available withour-port mezzanine cards or port 2 of 4x card in Mezzanine slot 2.
Installing interconnect module
Server bladesignal
Interconnect baynumber
Interconnect bay labe
NICs 1, 2, 3, and4 (embedded)
1, 2
Mezzanine 1 3, 4Mezzanine 2 5, 6 and then 7, 8
Mezzanine 3 7, 8 and then 5, 6
NOTE: For information on the location of LEDs anports on individual interconnect modules, see thedocumentation that ships with the interconnectmodule.
1. Install the interconnect modules based on the numbeordered and the number of fabrics in the configuratio
The enclosure ships with interconnect bay dividersinstalled. The interconnect bay dividers must be remobefore installing double-wide interconnect modules. Tremove an interconnect bay divider, press the releastab, and pull the interconnect bay divider out of theenclosure.
2. Install interconnect blanks in any unusedinterconnect bays.