National coverage, local care

www.glugglugglug.comMains fed water solutions for your workplace

Telephone 01934 631 666

AA1 & AA2 Water Cooler

An ultra modern design that is stylish, affordable and reliable. Built using superior technology with hygiene and functionality in mind.

Features

• Hygiene Guard protects thedispensing point

• Remote dispensing push buttonsbuilt using dependable technology

• Optional self sanitising technology

• Integral dual cup dispenser

• Optional energy saving features –saving up to 46%

• Drip tray drain to waste ready

• Generous dispensing area forbottles

• Internal storage for filters

• Customisable branding panel

• Mains fed.

Alpha:

• Floor standing or countertop.Ambient and cold or hot and cold.Available in Silver finish.

Delta:

• Floor standing or countertop.Ambient and cold or hot and cold.Available in Polar White finish.

AA1/AA2 Water Cooler

remote dispensing mechanical

push buttons for better hygiene

available in Silver or

Polar White finish

GGG_AA1_AA2_160915

National coverage, local care

www.glugglugglug.comMains fed water solutions for your workplace

Telephone 01934 631 666

Installation requirements

• Mains fed water supply

• 240 V Electrical socket

installation

Cooling system

Stainless steel 3 litre cold water tank. Thermostatically controlled to 4-12˚C

Heating system

Stainless steel 2 litre tank. Thermostatically controlled to between 87-92˚C.

Designed to prevent total drainage for heating element protection. Easily accessible hot water tank drain at the back of the cooler.

Refrigeration

Quiet, air cooled static-type condenser. No fan required. Protected against motor overload. Unit hermetically sealed. R-134a refrigerant.

Power supply

220 V, 50/60 Hz.

Dimensions

Floor standing:

Height: 1122mm

Width: 299mm

Depth: 381mm

Countertop:

Height: 445mm

Width: 299mm

Depth: 411mm

Weight

Floor standing:

18.6kg

Countertop:

13.5kg

specifications

AA1/AA2 Water Cooler

Integrated dual cup dispenser (typical capacity of 100 cups in total).

Internal compartment for optional accessories such as filters and self sanitising ozone generators.

GGG_AA1_AA2_160915

To ensure quick and smooth installation in your proposed location, each machine will require a 13 amp (240 V AC) switched socket which should not be more than one metre from the machine. Each plumbed-in water machine needs to be supplied with water from a rising main. Machines cannot be connected to a storage tank water supply. The pipework should ideally be no more than one metre from the machine although our fully qualified engineers are able to install machines in the majority of locations. Pipework must be terminated with a 15mm BS1010 stopcock.

installation is quick and simple

and only carried out by professional Glug Glug Glug

engineers, qualified to EDWCA standards