A World of INSTRUMENTATION

in your hands

Company Profile

1

This is to inform Aimil Ltd. was established in 1932 and having its head office and registered office at Naimex House, A-8, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi - 110044 (INDIA). Aimil has been at the forefront of Instrumentation industry in India, providing the state- of- the-art instruments and related services. Aimil is an ISO: 9001:2008 certified company with offices all over India.

Aiipltech is an associate company of Aimil Ltd. and having the registered office at Naimex House, A-8, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi - 110044 (INDIA) and office at Naimex House, BSEL Tech Park, B Wing, 11th Floor, Sector 30A, Vashi, Navi Mumbai - 400705 (INDIA) primarily looking after the marketing of the exports division of Aimil Ltd. Aiipltech is an ISO : 9001:2008 certified company with distributors and partners all over Africa and ASEAN countries. Aiipltech is also OHSAS 18001: 2007, ISO 14001: 2004 and ISO 27001: 2013 certified.

NAIMEX is also an associate company of Aimil Ltd. and having the registered office at Naimex House, A-8, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi - 110044 (INDIA) and factory at 59 H (A), NSEZ, Noida, Phase II, Uttar Pradesh - 201305 (INDIA). Naimex is the export manufacturing arm for exports of Aimil Ltd. and is an ISO: 9001:2008 and OHSAS 18001: 2007 certified company and meeting all international standards in manufacturing civil engineering testing Equipments.

The objective is to bring in leading edge technologies from the Best in the World, and integrate it with our outstanding service to our Customers, conducting with uncompromising integrity, honesty and respect.

Aiipltech was set up to cater to the International Market with a special focus on South East Asia, Middle East and Africa.

Aiipltech will have a special focus on the following Business Areas.

Sales and Support of Aimil Manufactured Civil Engineering Test Equipment.

Acting as a Direct Distribution Channel for Specialized Test Equipment from Partners who prefer Aiipltech as their sole channel.

We are an ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007, ISO 27001:2013 registered Company.

Aiipltech

Aiipltech shall offer the following Solutions for the Civil Engineering range.

Material Testing

Non Destructive Testing

Structural Monitoring Instrumentation

Geophysical

Surveying (Survey / MGIS)

Traffic & Transportation

Civil Engineering Software

Aiipltech Market Verticals

Aerospace/ Avionics

Automobiles

Atomic Energy

Biotechnology

Broadcast

Cement

Chemicals

Constructions

Defense

Education & Research

Railways & Ports

Healthcare

HVAC

Machinery Manufacturers

Pharmaceuticals & Drugs

Power (Hydro/Thermal/Nuclear)

Metals, Plastics & Polymers

Roads & Highways

Surveying

Telecommunication

Textile, Dyes, Paper&Packaging

Paints & coatings

Mining

Operates in the following

2

Soil Test

Asphalt Test

Sand, Aggregates Test

• Triaxial Shear Test

• Direct Shear test

• Consolidation Test

• Compaction Test

• CBR Test

• SPT Test

• Particle Size

• Specific Gravity

• Permeability

• Pressure Meter

• Viscosity Test

• Carbon Residue

• Penetration

• Marshall Stability Test

• Softening Point-Ring & Ball

• Ductility

• Flexural-Benkelman beam

• Bump Integrator

• Flakiness & Elongation Gauge

• Specific Gravity & Water absorption

• Crushing Value Apparatus

• Aggregate Impact Value Apparatus

• Los Angeles Abrasion Value Apparatus

Concrete Test

Cement Test

• Compressive Strength Testing Machine

• Flexural Testing Machine

• Slump Test

• Compaction Factor

• Consistometer

• Air Entrainment Meter

• Abrasion Resistance of Concrete

• Mixers: Pan Type/ Drum Type

• Curing Tanks

• Permeability Apparatus

• Vibrating Table

• Core Case

• ISI Mark Moulds

• Self-Compacting Concrete Test

• Vicat Apparatus for Setting Time

• Blaine Apparatus for Fineness

• Autoclave

• Le Chatelier Moulds

• Compressive Strength Testing Machine

• Vibration Machine

• Flow Table

• Mortar Mixer

• Moulds

• Permeability Tester

• Jaw Crusher, Ball Mill

• Pulveriser

Geotextile Test

Rock Test

• Cone Drop Test

• Dry Sieve Test Apparatus

• Gradient Ratio Test

• In-Plane Permeability

• Long Term Flow Test

• Thickness Gauge

• Cross Permeability Test

• Geotextile Permeameter

• Hydrodynamic Sieve Test

• Interface Friction Measurement

• Pull Out Test Apparatus

• Permeability

• Unconfined Compression

• Direct Shear

• Triaxial Test

• Hydro Fracture

• Point Load

• Slake Durability

We manufacture the following Test Equipmentfor Civil Range of Products & Applications

3

In addition to the state-of-the-art Instruments, we also offer consultancy for our valued customers in the fields of Civil Engineering through our Consultancy Division Advanced Technology & Engineering Services (ATES) and Survey Consultancy Services.

Advanced Technology & Engineering Services (ATES) is the consultancy division of Aimil Ltd. ATES is a multi disciplinary group of highly qualified professionals, practicing in the areas of Civil, Geological, Earthquake and Mining Engineering. ATES has a fully equipped laboratory in New Delhi with state-of-the-art analytical software and testing equipment's capable of extensive field and in-lab analysis and interpretation.

• Field Geotechnical Investigations for Hydro and Other Infrastructure Projects

• Soil, Rock & Construction Material Testing (NABL Accreditation No. T 2250)• Engineering Geology & Geo-hazards• Landslide Hazard Zonation Mapping• Design & Analysis• Reservoir Rim Stability Study• Geotechnical Field & Lab Investigations• Vulnerability Study

- Analysis of Secondary Waves• Risk Analysis

- Landslide Mitigation Studies• Structural Monitoring & Instrumentation• Geophysical Surveys• Health Monitoring of Civil Structures

Specialized Services provided by ATES:

Aiipltech also promote the Consultancy of Aimil Ltd., (ATES) and Survey Consultancy Services

Study and testing of roads – AIRPORT RUNWAY / APRON / TAXIWAY Heavy / Falling Weight Deflectometer (H/FWD) applies a dynamic impulse load on Pavements (Roads, Runway / Apron / Taxiway) rather than Static, Semi-Static or Vibratory load that simulates the loading of a moving wheel. The pavement response is analyzed with Dynatest’s ELMOD software to back calculate:

• Elastic Moduli • Stresses & Strains of each modeled layer• Critical/Weakest Layer • Residual Life • Optimum rehabilitation alternatives • PCN (Pavement Classification Number)

Structural Monitoring Instrumentation

Casagrande Porous Tube Piezometer

Electronic Water Level Indicator

Uplift Pressure Pipe and Head Assembly Unit for Remote Monitoring

Vibrating Wire Piezometer

Base Plate Settlement System

Magnetic Settlement system

Digital Inclinometer System

Tilt Meter – Vibrating Wire Type

Normal/Inverted Pendulum

Automatic Pendulum Co-cordinator

Single and Multipoint Bore Hole Extensometer

Tape Extensometer

Pressure Cells - Vibrating Wire Type

Vibrating Wire Temperature Meter

Temperature Meter – Thermistor Type

Vibrating Wire Borehole Stress Meter

Vibrating Wire Joint Meter

Vibrating Wire Embedment Type Strain Gauge

Vibrating Surface Mountable Strain Gauge

Pull Out Apparatus

Data Acquisition System – Data Loggers

Wireless Data Loggers

Strong Motion Accelerographs / Seismograph (Seismometer)

We also provide the below products forStructural/Geotechnical Monitoring:

At our Noida Plant, we manufacture Civil Engineering equipment for exports. It is a low cost manufacturing location with duty exemptions. Our location in the Special Economic Zone, Noida UP as a 100% Export Oriented Unit ensures we are exempted from paying any import duties, VAT on our raw materials and components used in manufacturing, this makes us extremely competitive on price. The property at Noida stretches over an acre of land of which the shop floor occupies 17,000 square feet with full epoxy coating to provide a clean environment. The facility is fully equipped with trained manpower and machinery to meet the needs of the market, in terms of instrument for Civil Engineering applications from Material Testing to Structural Monitoring.

Aimil's Manufacturing Facility NAIMEX at NOIDA (U.P) for Manufacture of Civil Engineering Test Equipment for EXPORTS

4

Advanced Asphalt-Bitumen Engineering Instruments

Aiipltech can offer the following instruments from World Leaders:

Equipment Application

Dynamic Triaxial Testing Dynamic Triaxial Testing uses either electro mechanical, Systems hydraulic or pneumatic actuation to suit your application in terms of load and frequency.

Universal Testing Machines To test tensile stress and compressive strength of materials, components and structures.

Hamburg Wheel Tracker To evaluate the resistance to rutting and moisture susceptibility of asphalt mixtures.

TSRST Apparatus, (Thermal Stress To determine the low temperature cracking susceptibilityRestrained Specimen Test Equipment) of asphalt concrete

Texas Overlay Tester To simulate the expansion and contraction movements that occur in the vicinity of joints or cracks and which result in reflection cracking in overlays.

Gyratory Compactor For Asphalt Mix design

Roller Compactor Dry granulation process used to make coarse granules prior to final compression

Adhesion-Cohesion-Slurry For adhesion property of aggregates to bitumen and Testerdetermining the proper consistency (mix design) for a slurry seal mixture

Rolling Thin Film Oven To measure the effect of heat and air on a moving film of semi-solid asphalt binder

AMPT (Asphalt Mixture To evaluate asphalt mixture properties to assess potential Performance Testing) performance

Nuclear Density Gauges To provide density and moisture measurements for construction industry and for mining and archaeology.

Moisture Monitoring Probe To determine Soil Moisture

Rheometer To measure the way in which a liquid, suspension or slurry flows in response to applied forces

Binder Extraction / For determining bitumen percentage in Bitumen paving Centrifuge Extractors mixtures

Binder Recovery Equipment To recover bitumen from a solvent

Marshall Testing Compactors Automatic compactor for Bituminous Mixes

Asphalt Mixing Laboratory mixing of Bituminous materials

Pavement Intensity To test the compressive strength, indirect intensity test and bearingTest Apparatus ratio of soil and pavement material.

Wheel Rut Shaper Used to prepare the bitumen specimen for wheel rut testing usedin research and road construction

5

Material Testing Instruments

We provide Key Products for testing in the following Materials

EDXRF (Energy Dispersive X-RAYFluorescence Systems) Spectrometers

Metal UTM, Hardness Testers, Pendulum Impact Testers, DWTT Drop Weight Tear Tester, Metallography Equipment

Plastics UTM, Durometer, Melt Flow Indexer, Densimeter, Color Testers

Textiles / Dyes Tensile Testers, Crockmeters for rubbing fastness (manual & digital) Washing machines for wash fastness Equipments for light fastness Equipments for Tearing/ Breaking/ Bursting strength, Pilling, Abrasion, Flammability Testers Color Matching System and Color Matching booth

Rubber UTM, Rebound Resilience Tester, Abrasion Testers, Flexometer, Stress Relaxation Tester

Packaging UTM, Drop Dart Impact, Tester, Coefficient of Friction Tester, Tear, Permeability, Shrinkage, Friction , Peel ,Leakage, Adhesive Testing etc.

Paper & Cardboard Box Compression tester, Package Drop tester, Bursting Strength, Folding Endurance, Puncture, Water Absorption, Tear Strength, Abrasion Testing etc.

Paint & Coatings Coating Thickness Gauge, Gloss Meter, Portable Spectrophotometer, Pendulum Hardness Tester, etc..

Mining Petrography Equipment, Surveying Instruments, XRF

Total Stations, Theodolites, Optical Levels, Measuring Wheels, Tripods, Laser Range Finders, Detectors, Point, Line & Rotation Lasers, Construction Professional Power Tools.

• Gas Chromatography • Automatic Titrator • Dust Monitor

• Karl Fischer Moisture Meter • Ambient Air Quality Monitoring System • Insitu Oxygen Analyser

• Trace Elemental Analyser • Multi Gas Analyser • Portable Flue Gas Analyser

Trainers for Aerodynamics, Automotive, Boilers & Steam Generators, Robotics, Electrical, Electronics, Environmental, Fluid Mechanics, Hydraulics, Microprocessor, Process Control, Refrigeration & Air Conditioning, Telecommunication, Thermo Dynamics

Geophysical Application Instruments, Earth Resistivity, Electrical Imaging, Exploration Seismographs, Seismic Cross Hole, Uphole, Downhole Seismic, Refraction, Reflection Seismic

Analytical, Environmental Monitoring Instruments

Laboratory Equipments & Trainers For Engineering Institutes

Earth Science Instruments and Software

Surveying Instruments

6

High-quality portable testing instruments for the non-destructive testing of material properties of metal, concrete, rock, paper and composites.

Concrete Test Hammer

• To measure strength of Concrete or Rock.

• Available in different models, for different impact energies - Original Schmidt, Silver Schmidt, Digi Schmidt

Cover Meter, Rebar Detection, Permeability Testing

• Assessment of the concrete cover using a cover meter

• Rebar detection – location of rebar’s beneath the Concrete surface

• Analysis of the air permeability of the cover concrete by a non - destructive method.

Ultrasonic testing of Concrete

• Ultrasonic pulse velocity (UPV) test instrument to examine the quality of concrete and other materials such as rock, wood and ceramics.

• Path length measurement, perpendicular crack depth measurement and surface velocity measurement.

GPR Utility Locator

For locating buried utilities

made of metallic and

non-metallic materials.

Stand-Alone Seismograph

• Designed for all seismic surveys.• Optimized for near surface geophysics• Groundwater and salinity studies• Mineral exploration• Environmental Investigation• Geotechnical Surveys

Pipeline Inspection

• Portable crawler system• Ultra-bright LEDS and high resolution camera• Fully submersed operation, water resistant • Cable length from 100m to 250m

Flow and Viscosity

• Measurement of fluid rheology’s under high pressure and temperatures. • Cement analysis – performs static gel strength tests on cement slurry samples. • Ultrasonic cement analyzer system – Non-destructive method for determining the relative

strength development of a cement sample under down pole temperature and pressure condition.

Utility Location

Pipeline Line Inspection

Non-Destructive Testing, Utility and Pipeline Testing

Cable and Pipe Locators

• Construction industry

• Water and Pipeline industry

• Power Industry

• Telecom Industry

GPR for concrete scanning and InspectionFor inspection of concrete structure such as floors, walls, slabs for detection of metallic and non-metallic objects and features e.g. rebar, cables, metallic and non-metallic conduits and pipes, voids, measurement of slab thickness.

Moisture and Corrosion Analysis

• Investigation of Reinforced Concrete

• Identify / monitor moisture

in Concrete

• Measure Electrical Resistivity

of Concrete

7

8

Weight Sets

ASTM Weights &

Vortex Mixers

Incubating Shakers

Hotplates & Stirrers

Portable Balances

Moisture Analyzers

Balances

Mechanical Scales &

Counting Scales

Shipping Scales

Bench Scales

Precision Balances

Analytical Balances

of virtually every industry.

electronic balances, scales and moisture analyzers that meet the weighing needs

has been synonymous with high-quality, durable and reliable mechanical and

Headquartered in Parsippany, NJ, USA for more than a century, the OHAUS name

9

Starter Pen Meters

Starter Electrodes

Starter 300D DO Portable

Portable

Starter 300C Conductivity

Starter 300 pH Portable

Starter 400D DO Portable

Starter 2100 pH Bench

Bench

Starter 3100C Conductivity

Starter 3100 pH Bench

Conductivity Bench

Starter 3100M pH &

Starter 5000 pH Bench

Water Analysis Meters & Electrodes

NVH Application Instruments

Created in 1985, OROS made its initial impact in designing and manufacturing real-time signal processing boards. Since 1994, OROS has focused its development strategy on the design of PC-based multi-channel signal analyzers. OROS analyzers have been immediately renowned for their high level of quality, reliability and real-time technology.

Multi-Channel Analyzers

NVGate, the Powerful Noise and Vibration Software Platform

Rotating analysis

• Stand Alone Recorder • Turbo Machinery Vibration Solution: ORBIGate

• Autonomous Monitoring • Torsional Vibration Measurement

• Handling any Transducers • Order Tracking Analysis

• Large Channel Count • Balancing

NVGate is the cornerstone for all measurement tasks. From field acquisition to reporting, it gathers the major measurements’ steps in a unique interface.It hosts all OROS software modules driving the 3-Series analyzers.

National Government monitoring bodies.are accredited by various

Balances, Infrared Moisture Balances, Jewelry Balances

Scales:

Balances, Precision Balances, Analytical Balances: Micro

and

scales

Weigh Bridge bridge, Portable truck

Table top scales, Industrial Platform scales, Bench scale, Medical scale, Crane

Systems: Road Weigh systems, Rail Weighbridge

Jewelry Instruments

Digital Ultrasonic Cleaner

Check Weighers and Metal Detectors

Standard

scales, Tank weighing

Calibration Weights

The product lines encompass the following

Analytical Balance Moisture Analyzer Platform Scale Rail Weighbridge

Weight Sets Tank Weighing Fiber Laser Marking

Ring Engraving Machine Laser Spot Welding Machine

Desktop Laser Spot Welding

match the highest international standards. Our technically sound product and solutions comply with all international standards, certifications, and

Applications. automation technology for laboratory and Industrial Aczet is an Indian company which manufactures equipment and systems featuring weighing, measurement and

Aczet's new & improved series incorporates unique & unequalled high end Mono-Tech Technology (Weigh Sensor) to

10

Bangalore Integrated System Solutions (BiSS)

BiSS is part of ITW (Illinois Tool Works), a Chicago based Fortune 200 industrial manufacturing company that unites about a thousand business units worldwide. BiSS is a 20-year old ISO 9001-2008 certified unit focused on development, manufacture and support of servo-hydraulic test systems.

BiSS systems evaluate mechanical properties of materials and components through tension, compression, flexure, axial-torsion, and fatigue tests. We also offer a broad range of services including calibration, training, technical support, refurbishment of old and legacy systems as well as assistance with laboratory management.

Servo-Hydraulic Shakers – Uni-axial

BiSS Uniaxial Shake tables are ideal for performing seismic simulation, soil liquefaction and vibration tests on models as well as for engineering qualification of components and assemblies for earthquake and vibration resistance. The table is designed with a natural frequency to exceed 100 Hz.

Servo-Hydraulic Shakers – Tri-axial ( 6 DOF)

BiSS 3-axes, 6-degrees-of-freedom shaking tables are state-of-the-art solutions for seismic simulation, soil liquefaction and vibration tests on building models as well as for engineering qualification of equipment or its components and assemblies for earthquake and vibration resistance.

2/3/4 Poster Systems

Four poster test rig is designed to test durability of most cars. A fully self-contained test rig combined with multi channel control system and user friendly application real time effects and performs durability, performance or vibration testing in a controlled laboratory environment. • Two poster test rig is designed to test durability of most Two Wheelers. • Three poster test rig is designed to test durability of most Three Wheelers.

Shock Absorber / Damper Test Rig

The SP-01-0210 is the industry’s first high productivity shock absorber / strut / front-fork test system specially designed for use on damper production lines. The SP-01-0210 is used to ensure that assembled parts meet specified performance specifications. • Used for 2, 3 and 4-wheeler suspension components

Tyre Test System

BiSS Tyre Test System evaluates both static and dynamic properties of tyres, including durability under constant as well as road simulation loading. The test system features two carriages with spindle assemblies and can test two tyres simultaneously. The wheel load is adjustable with maximum load of 100 kN applied through two servo hydraulic actuators.

Steering Test Rig

BiSS Steering Assembly Test System evaluates manual and power steering assemblies for durability and performance at frequencies up to 50 Hz. The tests performed are in accordance with JASO C 717, IS 13476, JASO C717 and IS 14269

11

Elastomer Testing System

SP-02-0610 BiSS servo-hydraulic test systems are used for developmental testing and quality assurance of elastomers including engine and transmission mounts, bushings and other rubberized components, used to suppress noise and vibration. These systems assess vibration response at frequencies ranging from 0 to 200 Hz, displacements ranging from 0.05 to 15 mm and forces ranging from 0 to 25 kN. Production test systems automatically test parts for damping response over specified amplitude and frequency.

Friction Stir Welding

BiSS friction stir welding test rigs feature high-stiffness; precision-aligned annular load frame with 5 axis movements and independently controlled servo-actuators using the advanced features of the 2370MS controller to provide translation and deformation control of each axis, these systems are ideal for welding aluminum sheets. • Suitable to weld steel, titanium, aluminum alloys and mix of thickness from 0.5mm to 65mm. • Vertical load capacity is 50kN with max. 3000RPM at constant torque. • 500mm stroke length in X and Y axis. • Wide range of options, straight, 3D contour, profile welding etc., Testing & Calibration

Load Cells

The tension-compression load cells are compact in design and are easily mounted on to the actuators, crossheads, platens and other test fixtures. The shear web load cells are relatively insensitive to side loads. These load cells are characterized by excellent linearity and seamless tension compression response with virtual absence of hysteresis. The load cells include circuitry for auto-calibration against internal shunt reference, thus obviating the need for on-site calibration during installation.

Servo-Hydraulic Actuators

The servo hydraulic actuators are designed for static and dynamic testing. They generate equal axial forces in tension and compression with excellent dynamic characteristics. Controlled displacements, loads, velocities are achieved with the use of appropriate servo valves, digital servo control, gauges, transducers and a high pressure hydraulic supply system.

Controllers There are two types of Controllers: Single Station as well as Multi Station. controllers are built around the latest that the electronics industry has to offer in terms of analog, digital and hybrid ICs. The controllers require a separate host computer and a PC running MS-Windows. All operations including system set up, calibration and tuning are performed from this computer. These solutions are available for a wide variety of applications, ranging from retrofit of aging test systems, through enhanced laboratory utomation and onto multichannel structural test systems as well as motion control systems including 6DOF shake tables.

Multi-Axis Shake Table

Multi-Axis shake table for durability and performance evaluation of automotive components and sub-assemblies. Digital control system for user friendly, repeatable and reproducible operation along with application software cover a wide range of testing requirements. Vibration inputs can be generated with up to six degrees of freedom (6DOF) either individually or collectively. The double ended, double acting, equal area servo actuators with swivel mounting on both ends isolate the piston rods from side loads and lateral accelerations. All actuators react vertically into the reaction mass and are coupled with suitable lever arms to transfer displacements to the table. The user friendly real-time software enforces any desired 6DOF table motion history at speeds restricted only by pump capacity.

Bi-Axial Test System

Biaxial Test Systems include a biaxial load frame four servo electric actuator assemblies with built-in digital position sensors, load cells and the BiSS 2360 multi-actuator control system. The Bi-00-501 is specially configured to test “cruciform” shaped thin sheet specimens with or without notches such as cracks under biaxial loading conditions. The control hardware and software are designed to enable continued retention of specimen center position even in the event of non-uniform displacement on any one of the four tabs. This, along with the capability for both in-phase and out-of-phase biaxial loading under static as well as low frequency cyclic conditions provide an ideal solution to the unique demands of testing thin films and sheets. The test system enables testing of specimens submerged in a bath at controlled temperature. Another option is the application of noncontact video extensometry.

12

SpectraQuest, Inc. is a leading developer and manufacturer of complete Turn-key Systems for training and diagnosis in Machine Vibration Analysis, Rotor Balancing and Shaft/Coupling Alignment. Our systems include Machinery Fault Simulators, Interactive Training Program, Data Acquisition Hardware, Software and Accessories.

A Complete Line of Simulators for Learning Machinery Diagnosis

Machinery Fault Simulators are test platforms for training and research in rotor dynamics, rotating machinery fault diagnostics, condition monitoring, and preventive maintenance. SpectraQuest offers a variety of simulators so that the customers can select a model to fit their requirements. Robust, modular design allows the users to easily introduce controlled and calibrated faults and to reconfigure the simulator for different studies.

Machinery Fault Simulator (MFS)

Bearing Balancing Simulator (BBS)

Wind Turbine Drivetrain Diagnostics Simulator (WTDS)

Vibration Fundamentals Training System (VFT)

• The Company based in Spain, specializes in Structural Testing Systems, Shake Tables and Motion Platforms,

Dynamic and Static Testing Rigs. Founded in 2015 in response to the current market needs for high quality, cost

effective advanced engineering solutions, mainly in, but not restricted to, the fields of motion simulation and testing. Each member of VZERO's team accumulates more than ten years of experience in motion simulation devices and

structural and passive safety testing systems, having provided the engineering services involved during all the project

stages; from requirement extraction and conceptual design to commissioning and training.

• VZERO team has taken part in complex projects worldwide, always achieving customer satisfaction and committed

delivery times.

MOTION SIMULATION PLATFORMS

Applications:

• Driving simulation • Flight simulation• Ship motion simulation • Hardware in the loop simulation

STRUCTURAL TESTING SYSTEMS. QUASI-STATIC AND PSEUDO-DYNAMIC TESTING SYSTEMS

Applications:

• Monotonic and cyclic testing of structures for structural behavior characterization

• Evaluation of actual seismic response of certain structures

13

Dynamic Testing

Systems

Four Poster

Applications:

• Structural durability

• End of line quality testing

• Ride comfort assessment

• Buzz and Squeak and Rattle testing

Shake Tables

Shake Tables

Applications:

• Dynamic testing of full or reduced scale models

• Evaluation of actual transient response of structures

Passive Safety Testing SystemsSeat Belt Anchorages Testing System

Seats and Head

Restraints Testing System

Motion platforms and robotics

• Ideal to serve as a teaching resources for subjects like: S t r u c t u r a l D y n a m i c s , Vibrations, Flight Mechanics, Vehicle Dynamics, Robotics and Theory of Control

Static Servo actuators Hydraulic Power Units and manifolds

Reaction masses and isolation systems

Multiaxis Servo controller Dynamic Servo actuators Reaction frames

COMPONENTS

14

CM Envirosystems is one of the fastest growing Environmental test chamber manufactures in the world. CME has earned itself an enviable reputation of being amongst the most reliable manufacturers of Environmental Test Chambers in the world providing testing solutions to spectrum of industries.

Since CM's foray into the Environmental Chamber business decades ago, the marketplace has evolved rapidly. Competition has grown and so has the customer's expectations. Yet, in spite of the growing competition, team CME turned every challenge into an opportunity.

Consistently adding value to its world class products CME is developing new designs & incorporating the latest technologies in manufacturing to ensure its position in the Industry.

CM Envirosystems

Climatic Chamber

The PAC series of climatic chambers are a great choice for cyclic low, high temperature and humidity tests. Built with the highest quality and reliability, this chamber is capable of meeting the most stringent testing needs of various international standards.

Corrosion Test Chambers

The SILVERFOG corrosion test chambers are designed to meet the requirements of all major international test standards. The chamber is manufactured using non-metallic materials such as FRP, PVC, and Nylon, ensuring a highly reliable and rugged system.

Thermal Shock Chamber

The KINETIC series of chambers are designed for the most stringent thermal shock tests such as MIL & IEC. The test basket is transferred between the hot & cold zones using a electro pneumatic system and has rapid recovery rates of temperature.

Bench Top Chambers

The Nano series of bench top chambers are designed for testing re lat ively smal ler s izes of specimen. With a small foot print, this chamber is capable of performing low, high temperature and humidity tests.

Altitude Chamber

The ALTIPLUS altitude test chambers are specially designed for the testing of aerospace products which are exposed to high altitude conditions. These simulators operate in a wide range of temperature and altitude of up to 50km above sea level.

Rain Test Chambers

AQUA – Rain Chambers Designed for the simulation of Rain/Water Spray as per IEC-60529, IS-9000 Part XVI-1983 and JIS-D 0203-1976 with features like fully Non-corrosive interior and exterior. Characteristic water flow patterns as per IPX1 – IPX4 and R1, R2, S1 & S2 standards.

Dust Chamber

The Aerial dust test chambers are designed for mainly conducting dust ingress tests as per various international tests such as IEC -60529, DIN, ASTM, IEC, JSS, MIL , and IS.

Walk-In Chambers

The Macro series of Walk-in/drive-in chambers are designed to test comparatively large test specimen. These chambers are assembled and integrated on-site with options of remote refrigeration units, conditioning units and control panels.

15

Hydraulic Bench Hydrostatic Bench Hydrostatic Force & Center of Pressure

Bernoulli Theorem Demo Unit

Flow over Weirs & Notches

Advanced PLC Trainer

Educational Goods Manufacturing

• Electronic & Electrical Instrumentation

• Electronic & Electrical Power Supplies & Systems

• Educational Trainers

• Electronics

• Electrical

• Automotive

• Micro-Processors

• Process Control Engineering

• Hydraulics

• Fluid Mechanics

• Thermo-Dynamics

• Tele-Communication

• Aerodynamics

• Boilers & Steam Generators

• Environmental & Nature Related

• Mechanical & Material Testing Apparatus

• Refrigeration & Air-Conditioning

Pump Maintenance Trainer Water Treatment Plant

Deformation of Straight beam Aerodynamics Wind Tunnel System

Automotive CentralMonitoring Warning System

Automotive Diesel FuelEducational System

Scitech boasts of the only manufacturer of educational trainers that are 100% exported as OEM to reputed American & European companies and to universities & vocational training institutes all over the world.

16

EDIBON International has been supplying teaching trainers and curriculum for over 30 years and consists of more than 3000 Technical Teaching Units and 1800 different Software Packages in most technical areas. EDIBON uses Open Control (EDIBON exclusive) allowing the student and teacher to vary the parameters at any time to allow unlimited analysis of the results (curve). It follows the curve process and varies conditions during the process; not just at the beginning (closed control only allows visibility to see what happens at the start and finish, not during the process). EDIBON also uses Multicontrol (EDIBON exclusive) which allows for the control of many parameters at the same time.

Units and Complete Laboratories available for

• Physics

3D Physics (Three Dimensions)

• Electronics

Basic Electronics:

Electronics Kits

Transducers and Sensors

Control Electronics (Advanced)

Digital Electronics (Advanced)

Industrial Electronics (Advanced)

ESN Scada-Net System for Electronics

• Communications

Basic Communications :

Analog Communications, Digital Communications

Advanced Communications –

Telephony, Applied Communications

• Electricity

Basic Electricity: Electricity Demonstration,

Electrical Installations Workshop

Advanced Electricity: Electrical Machines,

Electrical Machines Kits

• Energy

Energy Simulation

Energy Power Plants

Renewable (Alternative) Energies

Relays Units

Control from PC (SCADA)

Control from PLC

ESN Scada-Net System for Energy

Mechatronics & Automation

Automation (PLC Process Emulation)

Automation (PLC Small Scale Real Applications)

Automation (Industrial PLC Applications)

Automation (PLC Unit Operations Control)

Automation (Regulation and Control)

Automation (Control)

Systems

• Mechanics & Materials

Basic Mechanics

General Mechanics

Automotive

Special Mechanics & Foundry

Strength of Materials

Basic Cut Away Mechanics

General Cut Away Mechanics

Building

• Fluid Mechanics & Aerodynamics

Fluid Mechanics (Basic)

Fluid Mechanics (General)

Fluid Mechanics (Flow Channels)

Hydraulic Machines (Pumps)

Hydraulic Machines (Fans and Compressors)

Hydraulic Machines (Turbines)

Aerodynamics (Basic)

Aerodynamics (General)

Control from PC (SCADA) -

Control from PLC

ESN Scada-Net System for Fluid Mechanics &

Aerodynamics

• Thermodynamics & Thermotechnics

Refrigeration

Heating

Heat Pumps

Air Conditioning

Cooling Towers

Heat Exchange.

Heat Transfer (Basic)

Heat Transfer (General)

Heat Transfer (Special)

Nozzles & Steam

Combustion

Engines Test Benches

Thermal Turbines

Control from PC (SCADA)

Control from PLC

ESN Scada-Net System for

Thermodynamics & Thermotechnics

17

• Process Control

Process Control Fundamentals

Industrial Process Control

Control from PC (SCADA)

Control from PLC

ESN Scada-Net System for Process Control

• Chemical Engineering

Chemical Engineering (Basic)

Chemical Engineering (General)

Chemical Reactors

Chemical Process

Chemical Process (Agronomical Industry)

Chemical Process (Special)

Control from PC (SCADA)

Control from PLC

ESN Scada-Net System for Chemical Engineering

• Environment

Water Handling

Water Treatment

Pollution (Ground)

Control from PC (SCADA)

Control from PLC

ESN Scada-Net System for Environment

• Turn Key Projects TKP

• Secondary Education

• Technical and Vocational Education

• Higher Technical Education

• Food & Water Technologies

Food Technology (Basic)

Food Technology (Milk)

Food Technology (Oil)

Control from PC (SCADA)

Control from PLC

ESN Scada-Net System for Food & Water Technologies

Teaching techniques used

• SCADA- EDIBON Computer

Control System: Computer Control

+ Data Acquisition + Data Management

• PLC- Industrial Control using PLC

• FSS- Faults Simulation System

• MINI-ESN- Multipost EDIBON Mini-ScadaNet System

• ESN- Multipost EDIBON Scada-Net System

• ETDL- EDIBON Technical Distance Learning System

• CAI- Computer Aided Instruction Software System

• CAL- Computer Aided Learning Software

(Results Calculation and Analysis)

• RTC- EDIBON Real Time Control System

• EDAS/VIS- EDIBON Data Acquisition System/

Virtual Instrumentation

• MUAD- Electric Power Data Acquisition System

• 3D- EDIBON Three Dimensions System

• HYBRID- EDIBON Hybrid System (Energy)

• PHOTOELASTICITY- Photo elasticity System

(Strength of Materials)

The Paramount Group, being the pioneer and leader in its field, stands at the forefront of textile testing instrument technology in India. Since 1964, Paramount has flourished into a large group, comprising of different companies, all engaged in a wide spectrum of activities. Today the group is recognized as the pioneer and leader in the manufacture of textile testing and inspection Equipment in India. We have strived to achieve quality excellence in products and services. And we have strived to widen our horizons even further, to encompass all of Asia in our scope. Now with ISO 9001: 2008 and 14001 : 2004Certification and our comprehensive TQSP facilities, we are poised to become the global leader in the manufacture of Textile Testing and inspection Equipment.

• spectraVISIONi2 ™ (6 Light) : Latest Design, next Generation Color Matching Cabinet

• digiWASH i2 ™ (ISO & AATCC) : Colorfastness to Washing Tester as per AATCC & ISO

• crockMETERi3 ™ : Rubbing Fastness Tester

• accuSHRINKi2 ™ (ISO) : Shrinkage Template & Scale

• countTESTER i3TM : Direct Yarn Count Tester

• GSM Cutter i2 ™ : Sample Cutter for GSM

• PGLS 006 i2 TM : Handy Pick Glass to check the Reed and Pick of any type of fabrics

PARAMOUNT 7 Pearls for Global Textile Industry

Paramount Instruments

18

Fabric Testing Instruments

• For Rubbing Fastness• For perfect Colour Matching• For Shrinkage Testing• For Washing Fastness Testing• For GSM Testing• For Reed/Pick Testing• For Perspiration Fastness• For Heating & Stirring in the Lab• For Light Fastness• For Grading Results• For Conditioning in the Lab• For Distill Water in the Lab• For Physical Identification of Fibres• For Blend Composition in the Lab• For Temperature & Humidity Measurement• Q.C. Chart & Q.C. Kit for the Lab• For Tensile Strength• For Button Snap Pull Testing• For Bursting Strength• For Tearing Strength• For Abrasion and Pilling• For Flammability• For Fabric Thickness, Stiffness and Crease• For Fabric Drape, Wrinkle Recovery

To check the % Starch• For Moisture Determination• For pH and TDS• For Fabric Defects• For Water Repellency Testing• Sample Cutters• Fabric Extensometer

Yarn Testing Instruments

• Wrap Reels• Twist Testers• Yarn Appearance Board Winder• Projection Microscope• For Yarn Count• Package Hardness Tester• To Check Yarn Tension• Stroboscope• High Precision Balances

Lab Dyeing Machines

Fabric Inspection Machines

Swatch Cutting Machines

Needle Detection Machines

•

Rubbing Fastness Tester Color Matching Cabinet Color Fastness to Washing And dry cleaning

Digital Traverse Thread Counter

Button Snap Pull Tester Tear Tester Wrap Reel Single Yarn Twist Tester

Dial Type Yarn Tension Meter Dye Master SwatchCUTTER Needle Detection Machine

19

drying float/sink samples.

temperature before further reduction and division in accordance with ASTM D2013. Oven is often used for

The Preiser Air Drying Oven provides for the partial drying of coal to bring it to near equilibrium with room

Z91-2290-81 Air Drying Oven

8 of the Top 10 Commercial Labs

9 of the Top 10 Coal Mines

5 of the Top 10 Steelmakers

Their customer success includes:

The company sells in 90+ Countries and has been selling in Africa for 20+ Years.

Preiser covers all aspects of coal and coke testing including preparation, separation & analysis.

listed in our catalog. Preiser Scientific also maintains an instrumentation service facility.

invite your inquires on any laboratory instrumentation, equipment, or supplies that you may require even though it may not be

also publish specialty catalogs listing laboratory equipment and supplies for use in coal and water testing laboratories. We

2000 different vendors, can supply over 100,000 items for laboratory use. Our Catalog 94 lists many of these products. We

our catalog. Your inquiries on organic, inorganic, HPLC, or chemicals in bulk are invited. Preiser Scientific, representing over

Preiser Scientific can provide a wide range of high purity reagent chemicals, solutions and indicators and many are listed in

laboratory products manufacturing facility in Nitro, WV

locations are maintained in Louisville, KY and St. Albans, WV, the main office. Preiser Scientific also maintains a specialty

Preiser Scientific was established in 1924 and has continuously provided technical products and services to research,

20

• Large and roomy mechanical convection oven that contains 6 shelves.

• Temperature range from 0-105°F.

• Dimensions: 78-1/2”H x 35”W x 29-1/2”D; Weight: 623 lb; Voltage: 230V / 1PH / 50Hz

• Control panel with solid-state digital temperature control that maintains temperature uniformity

throughout the oven using two 24-hour interval timers to operate heating elements and fan motor.

91-6830-02 Holmes Model 401XL Crusher

Model 401XL has a capacity of 4000 pounds per hour using a 3/8” diameter perforated screen plate;

2500 pounds using a 3/16” diameter screen. It is recommended for crushing 6-inch and smaller

material to minus-4 mesh. Machines are available for many different electrical specifications and for

hazardous locations.

• The covered feed hopper with a capacity of 1.6 cubic feet (70 lb) has a manual-feed

control gate.

• Stressing safety in operation, its open latch sensor cuts all power.

• Screen plates have round-hole perforations. Available perforation diameters are

(in inches) 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, and 1. Two plates are included and

sizes must be specified.

7 1/2 HP, TEFC motor.

• The rotor speed is 1260 rpm; with interchange “V” pulleys, 2360 rpm.

• Dimensions: 56”H x 36”W x 39-1/2”D; Weight: 1040 lb; Voltage: 230V / 1PH / 50Hz

industrial, quality control, teaching, medical, education, environmental and government laboratories ever since. Office

• The Nema-12 magnetic starter provides a control circuit and overload protection for the

21

91-7122-01 Holmes Model 502XL Pulverizer

Holmes Pulverizer Model 502XL has a capacity of 400 grams of coal per minute using a

screen with 0.024” diameter perforations and is recommended to pulverize minus-4 mesh coal

to minus-60 mesh. This pulverizer is available either as a spring base (shown) or as an air

base, with a standard hopper (shown) or an extended feed hopper. Motors and wiring for

hazardous locations are available.

• The one-piece, dynamically balanced rotor has hard, coated hammers.

• Available screen plate perforation diameters are (in inches) 0.020, 0.024, 0.033,

0.040, 0.0625, and 0.093.

Three plates are included with purchase and sizes must be specified.

• The feed auger is chain-driven from an enclosed 1/8 HP, 2.7 amp, 115 V, single phase, TENV, AC gear

motor. The auger speed is about 130 rpm.

• The rotor is belt-driven by a 1 HP, TEFC motor. The speed is about 8200 rpm. The 1.5” P.D. Poly V sheave

will increase the speed to about 10,300 rpm.

• An enclosed Nema-12 motor starter has overload protection for each motor. The open-door sensor cuts all power.

• Dimensions: 23 or 26-1/2”H x 19-1/2”W x 27”D; Weight: 150 lb; Voltage: 230V / 1PH / 50Hz

91-8140-01 Holmes Model 70XL Riffle, Galvanized Interior

91-8140-02 Holmes Model 70XL Riffle, Stainless Steel Interior

Model #70XL is a totally enclosed, floor model sample riffle consisting of feed chutes, spouts and two

drawers of type-304 stainless steel. This riffle has 18 spouts, ¾” wide for minus-6 mesh coal. Optional

tilt lugs are available for containers and are bolted to the feed chute.

• The safety enclosure is 18-gauge steel, painted on both sides.

• To inspect or clean the interior, lift out the feed chute, remove the drawers, and open the doors.

• Dimensions: 35-3/4”H x 17”W x 31”D; Weight: 155 lb

FRS-440749A Rotary Sample Divider

The Preiser Rotary Sample Divider (RSD) provides fast and accurate sub-division of coal, min-

erals, ash and other granular samples. The RSD can be customized for throughput rate,

sample top size, and division ratio. It can be used for mixing samples prior to subdivision by

processing sample several times through the RSD

• All contact parts such as hopper, vibrator feed tray, “U” covers, divider segments

and overflow pans are constructed of stainless steel.

• Can be used to produce 1 to 16 sample splits in various combinations. Select

divider segments on basis of nominal top

size, capacity, and sample division ratios. Segments available to produce 1/16th, 1/8th, and 1/4th splits.

• Hopper is 1.8 cubic feet (51 liters) with a 4” X 6” gate to allow accurate splits of samples up to 1-1/3” top size.

• Feed rate is adjustable to allow greatest level of sampling precision.

• Dimensions: 44”H x 56”W x 33”D; Weight: 650 lb; Voltage: 230V / 1PH / 50Hz

91-8400-03 Holmes Model 1400 Sample Cutting Station

The Model 1400 sample cutting station accepts crushed sample feed from a Holmes

crusher. The belt conveyor discharges the sample over a reciprocating stainless steel

cutter.

• Built to mate with the 401XL crusher

• Includes two sample containers that hold 1375 cu.in. each

• Splitter operation is either continuous or intermittent via a 0-150 second dial

• Dimensions: 62”H x 35”W x 86”D; Weight: 2000 lb; Voltage: 380V / 3PH / 50Hz

22

Z90-8252-02 Preiser Model PAF 2014 Ash Fusion System

The Preiser Scientific Ash Fusion System is designed to determine

ash cone deformation temperatures in coal and coke ash per ASTM

Standard D-1857 and ISO Standard 540 (CO/CO2 reducing

atmosphere option).

The Model PAF 2014 Dual is comprised of two furnaces, control tower,

and a user interface PC. An all-in-one style PC running Windows®

operating system accommodates both image collection and analysis

concurrently.

The control tower consists of the furnace temperature controller, over temperature protection, and video capture. Video and

furnace communications to the user PC are via a single USB interface transferring furnace command and query requests

along with live streaming video from furnace cameras.

The analysis software allows the user to manually review and generate reports of completed tests. An autosuggest

algorithm is available to pre-populate analysis for the laboratory technicians’ review and refinement. Test results, log files,

and instrument settings can be viewed within the program. These files can be directed to a printer, forwarded with built in

email, viewed on a shared drive, or accessed via a LIMS system. Instrument data storage allows the accumulation of

approximately of 5 years of test data and images. It is suggested that data archiving be scheduled on a 6-12 month basis

for heavy instrument usage, and longer intervals for lighter use.

• Dual furnace configuration allows for up to 16 samples per run.

• Allows for manual or auto suggest analysis.

• Temperature ramp rate can be adjusted from 1ºF to 20ºF/minute (1ºC to 12ºC/minute)

• External single-arm positioning of direct view camera system with IR filtering.

• Very low (0.8-1.0LPM) gas consumption; requires no purge gas.

• Supplied with CO monitor and three level furnace over-temperature protection (temperature controller, over-

temp controller, user PC monitoring.)

• Voltage: 230V / 1PH / 50-60Hz / 40A

94-8542-02 Coke Drum Tumbler Tester, Double Drum

The Preiser Model 500 Tumbler is designed and manufactured to comply with ASTM

D-3402 Standard Test Method for Tumbler Test for Coke, and ASTM E-279 Standard Test

Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the

Tumbler Test.

The drum is made of ¼” thick A-36 steel plate with welded seams. It is 36” ID, 41-½”

long and has two pieces of stainless steel angle iron inside, as called for in the standard.

The access doors, one on either side of the drum to access the separate chambers, slide

in a track to prevent the operator from having to lift the door off the drum. These access

doors will be locked using quick lockdown cams.

The tumbler is controlled with a programmable logic controller (PLC) and a 3” monochrome touch screen and pushbuttons for

start, stop, jog and e-stop. Lock-out/tag-out is accomplished by way of a rotary disconnect and individual motor circuit breaker

• Drum rotates at 24 ± 1 revolutions per minute under load

• Two test runs per sample, per ASTM methodology, can be simultaneous

• Coke can be sized 3” x 2” per standard procedure, or 50% of 2-½” x 2” and 50% of 2 x 1-½” as an alternate procedure

• Voltage: 240V / 1PH / 50-60Hz

FRS-41000A4 Free Swelling Index System, Complete

Used for the determination of the Free Swelling Index of coal by the electric furnace method

as designated by ASTM Standard D-720. The Free Swelling Index test is a rapid, small-

scale, empirical method for measuring the free-swelling properties of coal. Results of the

test may be used as an indication of the coal’s coking characteristics, and have also been

used as an index of the extent to which a coal has been oxidized or weathered. Rapid, easy,

small-scale, and empirical method for measuring the free-swelling properties of coal.

• Dimensions: 12”H x 24”W x 24”D; Weight: 81 lb; Voltage: 230V / 1PH / 50Hz

23

Z90-9301-01 Hardgrove Grindability Machine

Preiser Scientific’s Grindability Tester is a compact precision built instrument designed specifically for the determination of the

relative “hardness” or abrasive potential of coal. Unit is constructed in strict accordance with ASTM Designation D-409 and con-

forms to procedures proposed by ISO for the determination of the Hardgrove Grindability index of

coal and coke.

• Stationary lower steel grinding bowl is mated with an upper grinding ring consisting of eight

steel balls that rotate at 20 rpm.

• Grinding ring is rotated by a motor/belt driven spindle to which 29 kg of removable weights are

attached that bear onto the eight rotating balls.

• A counter/switch assemble totals the number of revolutions and automatically stops the ma

chine at the end of 60 revolutions.

• Dimensions: 25”H x 24”W x 18”D; Weight: 312 lb; Voltage: 220V / 1PH / 50Hz

PC linked to an instrument specific interface and control box. Inter-unit cabling uses

• Voltage: 240V / 1PH / 50-60Hz

• PDF Test Result Summary

• Improved solder pot temperature control

• Easy calibration of thermocouple

• Expandable to four units with one controller

Standard D-2639, providing critical data necessary for the thorough analyses of coking coals.

coal by the Gieseler constant-torque method. It is designed to meet the ASTM

Expansion Kits. The Plastometer is used for the determination of plastic properties of

specified at time of purchase by adding the appropriate Dilatometer or Plastometer

of a mix of desired Dilatometer and/or Plastometer instrument types which can be

box is easily equipped to allow single, double, triple or quadruple instrument operation

component mounting and other mechanical improvements. The instrument interface

and solder pot retains the market leading proven assemblies outfitted with advanced

reduced size connections and a USB link to the host PC. The Plastometer head unit

represents a completely new instrument design. The Plastometer uses a commercial

to determine the fluidity of coking coal, to the next level of usability. The Plastometer

Preiser has enhanced the market leading Plastometer series of test instruments, used

Z91-3400-01 Preiser Gieseler Plastometer

• Dimensions: 15”H x 20”W x 22”D; Weight: 102 lb; Voltage: 230V / 1PH / 50-60Hz

dried at the same time in a convenient manner.

• Accessory Z91-1632-05 and Z91-1632-06 Combination Crucible/Weighing Bottle Trays permit multiple samples to be

port. rear mounted exhaust

• After it passes through the flow meter, it is preheated and passed into the oven chamber, over the samples, and out the

• The cylindrical stainless steel drying chamber is 8” diameter x 9½” deep.

samples up to 115ºC.

ture oven coupled with a microprocessor based temperature control system for drying

of coal as per ASTM Standard D3173. It consists of a specially designed low tempera-

The Preiser Model 100 Moisture Oven is designed to determine the moisture content

Z91-1632-02 Model 100 Moisture Oven

from 0-25 L/min.

• Input air passes through the manual control flow meter which is adjustable

Z91-3420-01 Preiser Plastometer / Dilatometer Combination

Preiser has enhanced the market leading Plastometer series of test instruments,

used to determine the fluidity of coking coal, and leading Dilatometer series of test

instruments, used to determine expansion and contraction characteristics of coal, to

the next level of usability. Both units represent completely new instrument design.

Both use a commercial PC linked to an instrument specific interface and control box.

Inter-unit cabling uses reduced size connections and a USB link to the host PC. The

Plastometer head unit and solder pot retains the proven assemblies and are outfit-

ted with advanced component mounting and other mechanical improvements. The

Dilatometer furnace also retains the proven assemblies and are outfitted with ad-

vanced component mounting and other mechanical improvements.

The instrument interface box is equipped to allow single, double, triple or quadruple instrument operation of a mix of desired

Dilatometer and/or Plastometer instrument types, to be specified at time of purchase.

24

• Voltage: 240V / 1PH / 50-60H

• PDF Test Result Summary

• Improved furnace temperature control

• Easy calibration of thermocouple and LVDTs

• Expandable to four units with one controller

The instrument interface box is easily equipped to allow single, double, triple or

outfitted with advanced component mounting and other mechanical improvements.

host PC. The Dilatometer furnace retains the market leading proven assemblies

control box. Inter-unit cabling uses reduced size connections and a USB link to the

Dilatometer uses a commercial PC linked to an instrument specific interface and

el of usability, The Dilatometer represents a completely new instrument design. The

used to determine expansion and contraction characteristics of coal, to the next lev-

Preiser has enhanced the market leading Dilatometer series of test instruments,

Z91-3410-01 Preiser Dilatometer

349 for the Audibert-Arnu method of analysis.

ate Dilatometer or Plastometer Expansion Kits. The fully automatic system is designed around ASTM D-5515 and ISO Standard

instrument types which can be specified at time of purchase by adding the appropri-

quadruple instrument operation of a mix of desired Dilatometer and/or Plastometer

• Voltage: 240V / 1PH / 50-60Hz

• PDF Test Result Summary

• Improved solder pot / furnace temperature control

• Easy calibration of thermocouple and LVDTs

• Expandable to four units with one controller

insmart Systems has been engineering, manufacturing, and supplying high quality equipment to customers across the globe since 1993.

Insmart’s Industrial solutions include

• Quality Assurance and Analysis Equipment for

Cement, Coal, Iron and Steel, Aluminum, Copper, Glass, Ceramic Plants, Educational Institutions, Advanced Research labs

• Product Application Areas

Geology, Mineralogy, Metallurgy, Elemental Analysis, Power generation, Defense Research Labs, Nuclear Science, Bio and Pharma Educational Institutions

• New Developments

Fully automated container based Robotic lab for cement and iron steel plant

Turnkey QC Laboratory setups

BOT Solutions for Onsite Coal Processing

Mechanized Third party sample collection systems

Fully Automated Container Labs for Coal

Automatic Vibratory Cup Mill & Pellet Press

Automatic Surface polishing machine

• Mineral Beneficiation Laboratory and Plant on Turnkey basis

Insmart systems through its state of the art mineral beneficiation laboratory provides a wide range of applications from communition to concentration on lab scale.

Facilities in Mineral Processing Field

• Creation of Mineral Beneficiation Test facility on turnkey basis from Conception to Concentration both on Laboratory and Pilot scale.

• Feasibility and amenability studies as per BIS & ISO standards.

• Single window facility for technology development & transfer, in house design & manufacture of process Equipments.

• Comprehensive batch scale test facility established at Hyderabad for Amenability/Feasibility Studies for scaling up for plant set up size.

• De-bugging of process related issues in the existing plants.

• Established a Demo plant for processing Low Grade Ores.

• Undertake extensive consultancy services.

• Insmart Product Suite

insmart product suite today provides more than 95 different machines and equipment that define the QC laboratory operations of a majority of bulk commodity quality assessment processes. All insmart products comply with the BIS & ISO standards and are robust machines that provide results with repeat accuracies.

Robotic Sample Preparation System

Robotic Sample Preparation System

25

• Jaw Crushers

• Roll Crusher

• Planetary Ball Mill

• Rod Mill

• Disc Mill

• Hammer Mill

• Cross Belt Clean Radial Sweep Sample Collection System

• Double Deck Vibratory Screen

• Hot & Cold Isostatic Press

•

• Bond's Work Index Rod Mill

• Ty-Lab Sieve shaker

• Ro-Tap Sieve Shaker

• Laboratory Sieve Shaker

• Wet Sieve Analysis unit

• Riffle Sample Splitter

• Mineral Jig

• Concentrating Table

• Density Separator

Bond's Work Index Ball Mill •

• Cyclone test Rig & Hydro Cyclones

• Spiral Test Rig & Spirals

• Davis Tube Tester

• Electromagnetic Drum Seperator (WET)

• Electromagnetic Drum Seperator (DRY)

• Floatation Cell

• Planetary Sample Divider

Mineral Separator

Planetary Ball Mill Disc Mill Hammer Mill Vibratory Screen Roll Crusher Ball Mill

Bond's Work IndexBall Mill

Ro-Tap Sieve Shaker Mineral Jig Floatex Density Seperator

Mineral Seperator Planetary SampleDivider

Cecil Instruments are leading British designers and manufacturers of HPLC systems, Ion Chromatography systems and UV/ Visible Spectrophotometers

systems.

HPLC – Cecil offers three ranges , with both high pressure gradient mixing (Adept series) and low pressure gradient mixing systems (Q –Adept series ) Both Adept and Q-Adept systems are 21 CFR Part 11 Compliant. A new addition to Cecil range is the Merit range of HPLC systems which are available as isocratic or binary gradient low pressure mixing

UV/VIS Spectrophotometers Single Beam

(with or without scanning)

IonQuestIon Chromatography

modular system

Double Beam Scanning The Aquarius and Super Aquarius

are double beam instruments

For Routine and Advanced Scanning Aurius and Super Aurius

Spectrophotometers are available

26

UMI has now become reputed company in manufacturing and supplying of complete range of Material Testing Machines like tensile testing, creep & hardness testing machines etc. With consistent quality machines & equipment, they are counted among leading manufacturers’ & exporters in the market for Static & Dynamic testing systems and Creep testing machines. In addition they also supply & export micro hardness & Universal hardness tester as per the requirements & specifications of the customers.

UMI with the experience that it has acquired since 1998 has supplied many of machines in the domestic market. Now, it is introducing its products, technology and updated quality, to satisfy the world market at very competitive prices and services.

UMI and its experienced team, made up of specialized professionals are always looking for new ways to better meet the demands of the Domestic and Overseas Markets. The company offers exclusive machines such as dynamic testing and creep testing machine that are essential for quality control, product and material development, technical educational institutions, research institutes and also in mechanical test laboratories etc.

• UMI machines are designed with the objective to conciliate the real needs of the market and the resources and materials available for production.

• UMI always has the ideal equipment for the market.

• UMI has always worked hard to optimize the cost-efficiency of its products. As a result of these efforts, UMI offers its products for extremely competitive prices, which are unbeatable by its renowned competitors.

• UMI is aware of its technological contribution with every machine that it delivers. Therefore it is also aware of the importance of its responsibility.

• UMI technicians are trained to render customized services, in an ethical and responsible manner.

About UMI

Hydraulic UTMRugged high capacity models from 100kN to 2000kN with optional servo proportional control, front open type hydraulic gripping and LCD touch screen control, safety cover & wide range of fixtures for shearing, bending, flexural, compression and extensometers available.

Screw Driven UTM(Single Column)Versatile single column servo drive control models up to 500kgf capacity for tensile testing with wide array of specimen clamping fixtures and extensometers.

Ball Screw Driven UTM (Twin Column)Sturdy dual column loading frames available from capacity of 500kgf to 300kN with precision servo driven control with high sampling rate software for various materials with wide array of specimen clamping fixtures and extensometers.

Hardness TestersRockwell, Brinell, Vickers’ Hardness Tester with manual and automatic / computerized options. Universal hardness tester (manual / computerized) also available.

Computerized Vickers' Hardness TesterComputerized Vickers’ hardness testing model for 50kgf capacity and micro hardness testers for capacity 2kgf also available.

Impact Testing MachineCharpy and Izod Impact testing machines complying with BS EN standards for 300J capacity and Charpy ASTM E23 test models with optional NIST Certification available.

Fatigue Testing MachineReliable & rugged construction floor standing Fatigue Testing Machine of capacity 200kg.cm with standard specimen size with optional transparent safety cover can be supplied.

27

HM-D Lab Series

Floor Model

extensometers, etc.

plates, compression plates, bending fixtures,

extensive range of fixtures, such as tensile grips, T-slotted

entire measurement range. It can also be equipped with an

capacity load cell provides maximum precision across the

made with nominal capacities between 5 y 1000 kN. Its high

The HM-D model, which is part of the Hoytom LAB series, is

UNIVERSAL TESTING MACHINES

evolving, making its customers’ future needs its projects of today.

plastics and wood sectors, among others. For this reason, its R&D&I department is constantly

customers include companies in the automotive, aeronautical, metal, paper and corrugated board,

In the framework of its specialization, Hoytom provides solutions to all types of sectors. Its regular

Solutions for all sectors

multiple synergies.

Bizkaia province in the Basque Country, well-known for its strong business environment and

manufacturing quality control and material testing equipment for over 50 years. It is located in the

Founded in 1961, Hoytom is a third generation family business that has been designing and

28

Technical characteristics

Tabletop Model

lower area, and compression in the upper test area.

400 kN and 2000 kN. Tension is always tested using the hydraulic grips, located in

tensile, compression, bend/flex and shear testing, with nominal capacities between

The DI-CP/V4 model, which is part of the PRO series, has been designed to perform

DI-CP/V4 Pro Series

29

Technical characteristics

Technical characteristics

compression in the upper test area.

Tension is always tested using the hydraulic grips, located in lower area, and

tensile, compression, bend/flex and shear testing, with nominal capacity of 2000 kN.

The DI-CP/V2 model, which is part of the PRO series, has been designed to perform

DI-CP/V2 Pro Series

etc.

as tensile grips, T-slotted plates, compression plates, bending fixtures, extensometers,

capacities up to 5 kN. It can also be equipped with an extensive range of fixtures, such

The HM-V 5 kN model, which is part of the Hoytom PRO series, is made for nominal

HM-V Pro Series

30

Technical characteristics

Vickers.

and 45 kp), but can also apply additional loads for other tests, such as Brinell or

loads of 60, 100 and 150 kp), and the Rockwell superficial scale (loads of 15, 30

This model has been developed to perform tests using the Rockwell scale (with

Rockwell Hardness Tester CiHo+ SRD

Hardness Tester

grips, compression plates, bending fixtures, extensometers, etc.

precision. It can also be equipped with an extensive range of fixtures, such as tensile

between 100 and 250 kN. Its high quality load cells provide a high degree of test

The HM-S model, which is part of the Hoytom PRO series, can achieve nominal capacities

HM-S Pro Series

31

Technical characteristics

Technical characteristics

can also apply additional loads for other tests, such as Brinell or Vickers.

60, 100 and 150 kp), and the Rockwell superficial scale (loads of 15, 30 and 45 kp), but

This model has been developed to perform tests using the Rockwell scale (with loads of

Rockwell Hardness Tester CiHo SRD

32

Technical characteristics

Technical characteristics

application speed is controlled via a hydraulic buffer.

Loads are applied via a motor. Loads are easy to select using a rotary controller, and

kg).

60, 100 and 150 kg. It also has additional loads for Brinell tests (31.25, 62.5 y 187.5

The Link RB model is a Rockwell hardness tester that is capable of applying loads of

Rockwell & Brinell Hardness Tester

40 selectable via a rotary dial.

Test loads applied via the incorporated lever and weights system. Loads are easily

scales respectively.

enable direct readings to be taken using the Rockwell and Rockwell superficial

The Minor-R and Minor-S models are quick and simple hardness testers, that

Rockwell Hardness Tester Minor R-S

33

enables the machining of harder materials, and increase broach durability.

sized notches according to standards ISO, EN, ASTM and BS. The speed controller

Broaches are easily interchangeable, and have been produced to create different

machining process to create notches for Charpy and Izod testing.

The Hoytom variable speed motorised notching machine uses a fast and precise

Motorised Notching Machine

750J.

the Charpy or Izod impact testing standards. It is available in capacities from 150 to

The Hoytom pendulum impact tester has been designed to test metals according to

Pendulum impact tester CHARPY & IZOD Pro Series

The “LHB” camera and software can be included for indentation measurement.

loads.It includes a touch screen for test selection and displaying the load applied.

providing maximum measurement precision and excellent stability of applied

Its load application system includes a force sensor directly above the indenter,

hardness tests between 62.5 and 3000 kg, in a fast and simple manner.

The M1-3000 model is a semi-automatic hardness tester that can perform Brinell

OUR CUSTOMERS

34

Brinell Hardness Tester M1 – 3000

Aimil Automatic Weather Station (Aimil-AWS) is a preconfigured, compact, robust and easy to use system to

provide faithful data in meteorological applications. It is designed for unattended monitoring remote sites which

require high reliability, low power consumption and extended back-up battery capacity. The ease of implementation

starts from the needs assessment through the standardized selection of options, and rapid delivery. The upgrading

of the weather stations with additional sensors was designed for easy installation with a plug-and-play interface to

allow for the immediate receiving of data.

Aimil automatic weather stations offer a select set of top-quality sensors to cover a wide array of meteorological

measurement needs, following WMO guidelines in all measurements and calculations.

Easy and economical to install, maintain and upgrade

Field-proven reliability and accuracy in harsh environments

Low power consumption for extended remote operations

Plug-and-Play type of interface for selected sensors to get in use

Measurements and calculations based on WMO guidelines

Preconfigured Weather Station with three readymade reporting options

Low Total-Life-Cycle Cost

The AWS can be connected directly to TCP/IP networks over Ethernet, GSM and

GPRS modems. The TCP/IP protocol stack is embedded into the data logger and no

external serial vs. TCP/IP adapter moduls are needed, meaning lower costs and

better robustness.AWS is consisting of Datalogger enclosed in weather proof

enclosure, Metrological sensor and mast to mount the sensors. We provide the

standard solution with parameters as Ambient Temperature, AmbientRelative

humidity, Atmospheric pressure, Wind Speed, Wind Direction, Solar Radiation &

rainfall.Apart from this we can customize the requirement depending on customer

specifications.

Data Logger

8 Analogue input channels Automatic data transfer through FTP

14 Flexible Digital channels & 4 counter Expandable analog inputs to add more sensors

User Definable allocation of memory size & mode Optron for GPRS communication. nterface the below sensors

35

18 Bit Resolution & Web Interfaceable Operating Temperature: -45°C to +70°C

Wind Direction Sensor

Sensing Vane coupled to linear endless potentiometer

Range 0 to 359°(3 ° electrical gap in the Potentiometer)

Resolution 1°

Wind Speed Sensor

Sensing 3 cup assembly mounted on friction free shaft and coupled to a chopper

Starting threshold 0.3 meters/sec.

Range 0 to 65 meters/sec.

Distance constant 2.5 Meters

Accuracy Better than 0.5 m/s up to 10 m/s + 2% FSD

Ambient Temperature Sensor

Sensing Standard Platinum RTD element (PT1000,or Pt100 mounted inside a weather shield

Range 0 -40 ° C to + 60°C

Resolution 0.1°C

Accuracy + 0.2 ° C

Humidity Sensor

Sensing Solid State Capacitive type sensor

Range 0 to 100 % operating at -40 C to +50 C

Resolution 0.1%

Accuracy 3% of full scale reading

Rainfall Sensor

Sensor Tipping bucket rain gauge

Sensing Magnet and reed switch (on-off output)

Resolution 0.5 mm

Accuracy better than + 5%

Solar Radiation Sensor

Sensor 72 element thermopile Spectral range 0.3to 3 p meters

Sensitivity - 20 micro volts/W/M ".

Timeconstant <30 seconds

Range 0-1500 W/Sq.in

Output 0 - 25 mV

Barometer Pressure Sensor

Range 600 to 1100 mhpa

Resolution Infinite

Accuracy +0.3 hpa

Output 0-1 V, 4-20mA

Other sensors are also available as: Atmospheric Pressure, Visibility Sensor, Soil Temperature, Solar Radiation

Sensor, Evaporation Sensor, Soil Moisture, Net Radiometer, Leaf Temperature, Pyranometer Sensor. Apart from

above , we can customize the product as per application.

36

Accuracy +/ 3 °

The company's technology is focused on four (4) primary product groups. They include

Weather & Environmental Monitoring

• WatchDog Weather Stations

• WatchDog Data Loggers

• SpecWare Software

Nutrient Management Tools

• SPAD 502 Chlorophyll Meter

• FieldScout CM-1000 Chlorophyll Meter

• Cardy Meters for pH, EC, NO3-, K+ and Na

Integrated Pest Management (IPM) Tools

• Fifteen Plant Disease Forecast Models (SpecWare software)

• Insect Modeling Software (SpecWare software)

• Degree-Day Recorders (WatchDog) and Software (SpecWare)

• IPM Scope

Soil Moisture & Quality Measurement

• FieldScout TDR 300 Soil Moisture Probe

• FieldScout SC 900 Soil Compaction Meter

• WaterScout SM 100 Soil Moisture Sensors

• WatchDog Soil Moisture Data Loggers

Spectrum Technologies Inc.

Spectrum Technologies is an American Company which manufactures and distributes affordable, leading-edge measurement information technology to the agricultural market throughout the world.

Integrated Plant Solutions

WEATHERTemperature, Light, Wind, Rain, Relative Humidity, and Leaf Wetness Monitoring

IPMInsect and Diseases ModelsIPM Scopes

SOIL AND WATERSoil Moisture, Soil Compaction,And Water Quality Meters

NUTRITIONNutrient, Chlorophyll, pHAnd EC meters

37

Qualitest is one of the top-ranking manufacturers and suppliers of testing technologies worldwide.

The key products from Qualitest range include hardness testers, universal testing machines, metallography, materials testing equipment, spectroscopy, microscopy, portable testers, and instruments for testing metals, plastics, rubber, textiles, paper, paint, cement, concrete and packaging materials, as well as technologies for NDT/Ultrasonic, surveying, automotive, aerospace, mining, oil/gas/pipe industries, gold & Jewelry applications and much more.

Spectroscopy EquipmentXRF Spectrometers and Metal AnalyzersAASOptical Emission SpectrometerUV/VIS SpectrophotometerFT-IR SpectrophotometerAtomic Emission Spectrometer

Metal TestingUTMsHardness TestersDWTT Drop Weight Tear TesterPendulum Impact TestersMetallography EquipmentMetallurgical MicroscopeDuctility TestersCharpy/Izod Pendulum Impact TesterSample Specimen Preparation Resonant Fatigue Testing Metal AnalyzersXRF Spectrometers, AASSurface Roughness TestersUltrasonic Thickness GaugesCold bend Testing MachineCreep and Stress Rupture Tester

Paint and Coating Testing Coating Thickness GaugeGloss MetersTransparency MeterColor MetersVisual Color ControlPull off Adhesion TesterPendulum Hardness TesterGradient OvenUniversal Paint Inspection GaugeViscometerStandard Light Source

Plastics TestingFalling Dart Impact TesterBulk Density TesterMedical Packaging TesterPVC testing EquipmentHDT Heat Deflection TestersFreezing TesterEnvironmental Test ChamberCarbon Black Content AnalyzerRotary Abrasion TesterBall Rebound TesterSalt Spray TesterClicker PressesFogging TesterElmendorf Tear Strength TesterCircular Sample CutterCoefficient of Friction TesterDrop Dart Impact TesterFilm Free Shrink TesterFilm Permeability TesterFriction/Peel TesterLasting Adhesive TesterLeak Tester

NDT and Ultrasonic TestingUltrasonic Thickness GaugeUltrasonic Flaw DetectorMagnetic Flux Leakage SystemUltrasonic Velocity GaugePrecision Thickness GaugeCylinder Thickness GaugeStorage Tank NDT System

Textile Testing EquipmentRotary Abrasion TesterCrock MeterYarn Package DurometerBurst Strength TesterWater Penetration TesterCircular Sample CutterDyeing Rubbing TesterManual /Motorized Wrap WheelPerspiration TesterYarn InspectorShoe Lace Abrasion TesterWaterproofness TesterSpray TesterLaunder TesterMartindale Abrasion TesterPiling testerFrazier Air Permeability Tester

Automotive Testing EquipmentUTM-Tensile TesterHardness TesterPendulum Impact testerDuctility TesterDurometerResonant Fatigue TestingOptical ComparatorSurface Roughness TesterEnvironmental Test ChamberFlexometerTire Plunger Tester

Rubber TestingRubber Process AnalyzerFoam Pressure RheometerFlexometerShear Adhesion Failure TesterStress Relaxation TesterElastometerTire Plunger TesterShoe Bending Waterproof TesterShoe Sole Density TesterParallel Plate Williams PlastometerHot Set TesterAutomatic Creep and Relaxation Tester

Cardboard and Paper testingBox Compression TesterPackage Drop TesterPuncture TesterPaper Die CutterInk Rub TesterAutomatic Bursting Strength Tester

Packaging Testing EquipmentRing Crush TesterFolding Endurance TesterCoefficient of Friction TesterDisk Stripping TesterStrip Sample CutterHeat Seal TesterFriction/Peel TesterLasting Adhesive TesterLeak/Seal Strength Detecting EquipmentOpacity MeterPrimary Adhesive TesterDigital Torque TesterTape Adhesion Motor RollerTape Retentivity TesterVacuum Packaging AnalyzerAuto Tensile Tester

Oil, Gas and Pipe TestingTensile TesterHardness TesterDrop Weight Tear TesterPendulum Impact TesterHoliday/Porosity DetectorVideo Borescope Portable Digital MicroscopeCorrosion Detection Pipe Scanning Equipment Ultrasonic Flaw DetectorPlastics Pipe/PVC Testing

Mining Testing EquipmentXRF Spectrometer and Metal AnalyzerTotal StationOptical / Digital TheodolitePetrography Sample Preparation

Qualitest

38

• Ventilation • Crushing • Milling • Conveyors • Pumps...

Calibration measurement

Field multifunction calibratorfor basic use

High Precision multifunction calibrator benchtop Calibrator

Field PressureCalibrator

Established in 1896 in the nearby of Paris, France, AOIP, an ASGARD group company, designs, manufactures andmarkets a wide range of solutions in two different core activities: Test and Measurement instrumentation and Electrical motor control. Their Test and Measurement solutions are thus suitable for any industry, such as energy field, pharmaceutical industry, metal industry, oil and gas, automotive, space, food and beverage, marine, petro chemistry, paper / wood / water treatment, education and research… Electrical MOTOR control EPM Electrolytic starter (LRS) for slip ring motors from 550 to 20,000 kW EPM electrolytic starter can be used to start slipring motors from 500 kW to 20,000 kW. It will supply the power necessary to drive the motor by resistance variation. Designed for controlled starting and speed control of large slipring motors in demanding applications, the EPM liquid rotor starters ensure a smooth progressive acceleration of installations such as:

WIDELY USED IN VARIOUS INDUSTRIES such as mines, quarries, cement plants, water treatment and power generation and can also be customized for specific applications such as car shredders, plastic mixers and sugar cane cutters. Adapted to withstand difficult site conditions, the EPM starter offers many advantages Smooth Progressive acceleration Rugged and Reliable Reduced Maintenance Flexibility

Process Signalcalibrator

Leakshooter Camera

Leak detector , manometer,thermometer, IR-thermo hygrometer

39

Data acquisition Modular data acquisition system with 2, 9 or 14 input / output boards

Prog digital panel meterfor temp and process signalMeasurements

Data Acquisitionsoftware

Cable Fault Locator

Telecom Megohmmeter

LAN Tester

Pyrotechnics Firing units

Pyrotechnic ohmmeter / Safety megohmmeter

Insulation tester

Onsite 10 A micro-ohmmeter for inductive and non-inductive resistance

Resistance standard, 6-decade boxes1 mΩ to 10 MΩ

Miniature 2.2 µm process infraredthermometer for demanding applications with optional touch screen

8-14 µm documenting portableinfrared thermometer with camera imaging

Combustion gas analysis Hand-held basic combustiongas analyzer with 2 sensors

Telecom and networks

Hand-held industrial combustion gas analyzer with 4 sensors

Infrared thermometry

Ohmmetry

40

SAYBOLT CHROMOMETER

MAGNETIC QUENCHO-METER

GENERAL TEST EQUIPMENT

POINT APPARATUS

CLEVELAND OPEN CUP FLASH

APPARATUS

MANUAL ABEL FLASH POINT

FLASHPOINT APPARATUS

MANUAL PENSKY MARTEN

FLASH POINT

LOW TEMPERATURE VISCOSITY BATH

KINEMATIC VISCOSITY BATH

VISCOSITY

Testing Equipments for Petroleum and Grease.of customer friendly and competitively priced testing solutions. Their specialty is

A world-class manufacturer and designer of pharmaceutical and petrochemical

41

testing equipment. Wadegati Labequip Pvt limited is recognized as an innovator

FUELS

RAMSBOTTOM CARBON

RESIDUE APPARATUS

REID VAPOUR

PRESSURE BATH

COLD FILTER PLUGGING

POINT APPARATUS

COPPER STRIP

CORROSION

APPARATUS

COPPER STRIP

CORROSION APPARATUS

OIL CENTRIFUGE

WITH HEATING

EXISTENT GUM BATH

LUBRICATING OILS

FOAM BATH

DEMULSION BATH

CHANNEL POINT

APPARATUS

NOACK EVAPORATION

LOSS

CHEMICAL STABILITY

BY SEALED GLASS

TUBE METHOD

RUSTING BATH

CLOUD AND POUR POINT

TESTER

FLOCK POINT TEST

APPARATUS

42

MOISTURE OVEN FOR COAL

COAL AND COKE INDUSTRY

TERGOTOMETER

SOAP AND DETERGENT INDUSTRY

GAS EVOLUTION TEST APPARATUS

LUBRICATING GREASE

WATER WASHOUT OF

PREVENTIVE

CORROSION

GREASE INDUSTRY

GREASE WORKER

DROP POINT OF

GREASE

ROLL STABILITY OF

LUBRICATING GREASE

HEAT STABILITY OF

GREASES

43

Ultrasonic

• Portable Ultrasonic

Flaw Detector

• Phased Array

• Thickness Gauges

• Reference Blocks

• Probes & Accessories

• Rail & Axle Tester

Magnetic Particle

• Prod Units

• Yokes

• Bench Units

• Ultraviolet Black Light

• Consumables &

Essentials

Radiography

• Gamma Ray Projectors

• IR-192,Se-75,

Co-60 Sources

• Digital Radiography

• Radiation Detection

and Measuring

• Equipments

Ultrasonic Systems

• On Line / Off Line Systems

• Bar Testing

• Pipe Testing

• Piston Testing

• Component Testing

Eddy Current

• Sorting Equipments

• Component Testing Equipments

• Material Testing Equipments

• Portable Instruments

44

N2O, SO2, CO, CO2, O2 and TOC. Additional components can be added on easily.

to 180°C. Typical monitoring components include HCL, HF, NH3, H2O, NO, NO2,

such as sampling system and the FTIR analyser cell are consequently heated up

Emission Monitoring in Incinerators or Cement plants. All parts of the MGS300

measurement in hot, wet and corrosive gas streams. Typical application includes

Process Monitoring (CEM). The system is used for continuous multi component

The MGS300 has been designed to provide reliable Continuous Emission and

CONTINUOUS EMISSION MONITORING SYSTEM MGS300

Proven solutions

Low maintenance

Automatic calibration

Electrochemical or Paramagnetic O2 sensor

NDIR, CLD, FID technology

Data Acquisition Systems

Measurement of volume, P, T and dust

Measurement of emissions

FEATURES

lowest possible maintenance.

combustion processes. All our solutions offer state of the art technology and

boilers in power plants, incinerators, cement plants, steel plants and in industrial

reliable measurement of combustion gas emissions on coal, oil or gas fired

The JCT Continuous Emission Monitoring System is designed to provide easy and

calibrations and tests of the analyzers on site. Their product portfolio comprises of as below.

They are also well equipped to perform calibrations of analyzers by the means of life gases. They also do

experience in measuring area. They also cooperate with students from the best technical universities.

perform gas measurements. They have a team of experienced designers, engineers with many years of

45

CONTINUOUS EMISSION MONITORING SYSTEM CEMS

Analytics Limited is a Poland based company and they provides high quality measuring equipment and

Very low maintenance

FEATURES

Multi-component measurement system

Hot and wet measurement

Turn key solution

High-resolution FTIR technology

ZrO2 sensor for oxygen measurement

Integrated FID technology

Remote diagnostics

CONDITIONING SYSTEMS NO2 to NO Gas Converter JNOX The JNOX Series is designed to convert NO2 to NO for extractive flue gas analysis systems where total NOx concentrations are measured with an NO-NDIR analyzer. FEATURES

Approved and reliable technology

Converter efficiency > 95%

Long life converter cartridge

High flow design

3U high 19“ rack mounting

Wall mounting

HYDROCARBON ANALYSERS The Thermo-FID (Thermo - flame ionization detector) is used in a variety of industrial applications, environmental measurement systems and R&D projects. Typical use of the Thermo-FID are LEL control, flue/exhaust gas at waste incinerators or the petro/chem-industry, ambient air analysis, work place control MAK/TRK-limits and process control optimization. The ES model is designed to be mounted in a 19“ rack and is suitable for monitoring hydrocarbons from sub ppb level up to 100.000 ppm. The ES comes standard in a compact 19“ rack configuration. The Thermo-FID model FE introduces the standard instrument configuration built into an rated IP45 or into an optionally offered IP65 field enclosure perfectly suited to fulfil industrial field installation requirements. All gas fittings, signals and main power connections are located at the bottom of the instrument enclosure of the FE. The MK model is designed to be installed directly onto the stack or process wall perfectly suitable for industrial monitoring. The MK comes with a heated sample tube to avoid condensation in the flange area and has an easy replaceable heated inlet filter. This filter can be back purged automatically as an option.

The PT model is designed for portable application and is suitable for monitoring hydrocarbons from sub ppb level up to 100.000 ppm.

FEATURES OF Thermo – FID Hydrocarbon Analyzers

Automatic start up

Automatic calibration

Automatic flame ignition

Automatic fuel shut off

Built-in catalyst for burner air

Built-in zero gas (PT Model)

For use in hazardous area zone 1 or 2(FE Model)

Directly duct or process mounted (MK model)

19“ rack/bench mount (ES Model)

Very low maintenance

TÜV and MCERTS approved

46

The JCC Sample Gas Conditioner is designed to lower the sample dew

intolerant analysis equipment. The operation capability at highambient temperature enables also applications i.e.in boiler houses. FEATURES

Stable dew point at +3°C

Ambient temperature + 5...+45°C (50°C)

Proportional temperature & pressure control

Built-in pump & condensate discharge pump

Digital temperature display and flowmeter

High performance heat exchanger

Proven and reliable technology

Compact and robust

Environment-friendly (CFC free)

The JCC Portable Sample Gas Conditioner is designed to lower the sample dew point

equipment. The operation capability at high ambient temperature also enables applications i.e. in boiler houses.

FEATURES

Stable dew point +3°C

Ambient temperature +5 ... +45°C (50°C)

Proportional temperature & pressure control

Built-in pump & condensate discharge pump

Digital temperature display and flowmeter

High performance heat exchanger

Proven and reliable technology

Compact and robust

Environment-friendly (CFC free)

Where space is limited but sample gas conditioning requirements are high, the JCM cooler module provides the ideal solution. JCM Sample Gas Coolers are designed to separate water vapour from sample gas. Because water vapours are suppressed, analyzers can be used in continuous operation at low maintenance. The main use of this cooler is to guarantee suitable conditioned sample gas prior to analysis by moisture equipment. This allows full utilization of your gas analyzer with a minimum amount of maintenance or down-time.

FEATURES High performance Peltier Element

Compact and robust

Proven and reliable technology

Internal tubing pump

Condensate Monitoring

Corrosion resistant gas paths Stable Dew Point

CONDITIONG SYSTEMS Portable Gas Conditioner JCC

47

CONDITIONING SYSTEMS Sample Gas Conditioner JCC

point and supply dehumidified sample gas with a pump to the moisture

and supply dehumidified sample gas with a pump to the moisture intolerant analysis

CONDITIONING SYSTEMS Peltier Cooler JCM

EWAI PRODUCT LINE

GC-MS SeriesGC SeriesHPLC SeriesAAS SeriesAFS SeriesXRF Series

Clinical TestingData WorkstationsIC SeriesICP Series

GBC PRODUCT LINE

ICP-TOFMSAASUV-VisICP-OESX-Ray DiffractometerMFR

strategic partnership.

your location. In 2013, EWAI and GBC Scientific Equipment Pty. Ltd. of Australia entered into a

safety.EWAI is dedicated to maintaining a high quality of products and after-sale services. of

certificates. Their quality products provide solutions for applications ranging from mining to food

XRF. Along the way, they have collected more than 30 patents and more than 100 awards and

development, they have expanded their product line to include GC, GC-MS, LC, AAS, AFS, and

produce a commercial GC-MS system. Through continuous focus on research and

introduction of the GC-MS 3100 in 2007, they became the first domestic manufacturer to

From the beginning, innovation has always been at the core of their business. With the

customer’ s needs.

over 25 years of experience in providing a wide range of analytical solutions to fulfill our

Founded in 1988 by two senior engineers, East & West Analytical Instruments, Inc. (EWAI) has

0.03 ℃. and improved PID method, with a control accuracy of ±

and column oven temperatures are controlled by a new

gas, split flow and makeup gas, among others. Detector

control, including the carrier gas, ignition gas, auxiliary

gas paths can be controlled using EPC flow or pressure

in better performance and greater automation. Up to ten

Series, a number of technical improvements has resulted

chromatographs. As compared with the GC-4000A

The GC-4100 Series is EWAI's new generation of gas

Features

GC-4100 Series Gas Chromatograph

sufficiently large amount of data points.

● High-speed scan and sampling circuit allows for a

applications.

while simultaneously expanding the instrument's

feature improves the overall performance of the system

● The adjustable positive chemical ionization (PCI)

effectively improving resolution.

technology optimizes the relative ion transmission rate,

● An industry-first high-speed DC compensation

the signal to noise ratio.

unique DC equalization technique that further improves

the electron emission current and electron energy, and a

improved filament control module that intelligently adjusts

●Features include an

Mass Spectrometer (Quadrupole)

GC-MS 3200 Gas Chromatograph

48

Fluorescence Spectrometer

XD-8010 Energy Dispersive X-Ray

with Auto-Sampler

AF-7500 Atomic Fluorescence Spectroscopy

Spectrometer

AA-7050 Series Atomic Absorption

Chromatograph

LC-5520 High Performance Liquid

Features

●The AF-7500 can analyze two elements simultaneously.

It can be used to detect low and trace concentrations of

elements including As, Sb, Bi, Se, Sn, Pb, Ge, Te, Zn,

Cd, and Hg.

● By using a peristaltic pump and an 8-way valve for

sample injection, the AF-7500 is capable of analyzing

one sample while taking in another sample. The system

is able to switch between samples without them

interfering with one another. This feature allows the user

to double the throughput of the instrument as compared

to other similar AFS instruments.

Features

● Three different types of X-ray radiation safety systems,

software interlocks, hardware interlocks, and mechanical

interlocks, will completely eliminate radiation leakage

under any working condition.

● The XD-8010 features a uniquely designed optical path

that minimizes distances between the X-ray source,

sample, and detector while maintaining the flexibility to

switch between a variety of filters and collimators. This

significantly improves the sensitivity, and lowers the

detection limit.

Features

Based on the solid and durable design of the LC-5510

pump, the LC-5520 pump features an improved pump

drive system. This improvement results in a smoother

transition between the two pump drivers during the

infusion process.

● Without using a pulse buffering device, we can achieve

a pressure fluctuation of < 0.4%. With a pulse buffer the

pressure fluctuation can be reduced to < 0.015%.

Features

The graphite furnace camera helps users locate

injection probe, view sample status in graphite tubes and

optimize furnace temperature programming.

Graphite furnace gas saving mode prolongs the usage

time of protection gas and therefore reduces the

operating cost of the instrument.

Graphite furnace double inner gas path permits an

auxiliary gas in addition to the protection gas so as to

improve the ashing process and obtain better results.

49

50

GBC PRODUCT LINIC-2800 Ion

Chromatography

ICP-1000 II Automatic ICP Emission

Spectrometer

AAS enduro Z-1000

AAS SensAA

lamps and Super Lamps.

normal and reduced height for ease of operation.

between 0.1 and 2.0nm in 0.1 nm increments in both

element selection and accurate lamp optimization.

precision and sensitivity.

and 1.1 Tesla in 0.1 Tesla increments for maximum

Unique Variable Magnetic Field Strength between 0.6

the range products in the marketplace.

low cost AAS but its performance exceeds many top of

performance to its looks and functionality. It may be our

new in every aspect from the ground up - from its

Absorption Spectrometer, the SensAA. The SensAA is

GBC Scientific Equipment introduces the latest Atomic

New AAS Design Incorporates Touch Screen Technology

of its advanced capabilities.

2800 can be used by even non-expert operators with all

and simple to use. With just some simple training, the IC-

tool.Additionally with the Ace software, it is reliable, fast,

advanced components is a powerful analysis

eluent generators, IC-2800 with its technologically

system to chemically-regenerated suppressors and

counterparts.From PEEKTM dual piston pumps and flow

chromatography comparable to their international

we were able to produce key components of the ion

and abroad. With significant innovative breakthroughs,

latest ion chromatography technology from both at home

IC-2800 Ion Chromatography was created using the

● Protection against quartz torch melting

from operator error.

safety precautions to prevent damage to the instrument

ignition, the system performs diagnosis and begins

● ICP ignition can be performed from the software. After

simple, intuitive software interface.

● All control of the instrument can be performed from a

front control panel.

● The ICP-1000 II is compact, light weight, and has no

Eight-lamp auto turret with auto lamp align for rapid

Automatic wavelength and choice of 20 slit widths

Coded Lamp Recognition for both normal hollow cathode

GBC Scientific Equipment Pty Ltd commenced operations in 1978. GBC designs, manufactures and markets a range of

scientific instruments. GBC is a major manufacturer of analytical instruments including the 5th Generation Atomic

Absorption Spectrometer (AAS), 4th Generation Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES),

3rd Generation UV-Visible spectrophotometers, 2nd Generation ICP-oTOFMS, HPLC, XRD and Rheometer systems.

A true double-beam spectrometer. The basic instrument includes

advanced features such as programmable gasbox, 8 lamp turret with

auto alignment of lamps, optimization of wavelength and slit width and

setting of the lamp current. The instrument building blocks include the

optional Super Lamp Power supply for 1 or 4 lamps, the optional coded

lamp recognition, the optional automatic burner rotation and optional

Electronic Sample Viewing which allows real time colour viewing of

sample compartment, a must for graphite furnace analysis

Scientific Equipment

GBC manufactures and distributes a comprehensive range of quality HPLC products from turn-key systems to stand-alone modules including autosamplers, pumps, detectors, and accessories, as well as individual components including columns.

System 1: Fully Featured Isocratic HPLC System

System 2: Advanced Gradient HPLC System

System 3: Fully Automated Gradient HPLC System

System 4: Automated Gradient HPLC System with your choice of Detector

GBC has built on its long tradition of expertise in elemental analysis and has emerged as a major player in Inductively Coupled Plasma Optical Emission Spectroscopy, with rapid market acceptance around the world (over 50 countries) in all the major areas of application, including environmental, agricultural, biological, metallurgical, geological, petrochemical, agricultural, and pharmaceutical analysis.

The Integra and Quantima ICP-OES spectrometers with a range of options and accessories, provide the ideal combination of sensitivity, resolution, speed and wavelength range for every elemental analysis requirement.

4th generation of the Cintra Family of UV-Vis spectrometers signifies a new generation of the highest performance true double beam spectrometers available on the market today. These instruments offer versatility required for the diverse range of applications in today's modern laboratory. The high performance Cintra family ranges from the cost effective 1010 for manual routine applications through to the superior automated high performing double monochromator 4040 with exceptional stray light rejection that allows you to confidently analyse demanding samples beyond 5 absorbance units.

The new GBC OptiMass 9500 is the second generation state-of-the-art Time-of-Flight Mass Spectrometer. Simultaneous measurement of the entire mass range from 1 amu to 260 amu is always available. New software features such as Semi Quant, Retrospective Semi Quant, Fingerprinting and Auto Optimisation open up new avenues for mass spectroscopy.

51

The exciting new MFR 2100 Micro Fourier Rheometer has redefined

the state-of-the-art in rheological analysis.

This groundbreaking product has revolutionized the traditional

rheometer market due to the significant benefits offered by its ability to

analyse very small volumes and perform analyses across a wide

frequency range in seconds.

GBC Difftech introduces a New Concept - The "Enhanced Mini-

Materials Analyzer" X-ray Diffractometer incorporating the very latest

in design and technology for the Materials Science Industry. The εMMA is an enhancement of the successful MMA which offers the

same compact size together with even more capabilities.

BJS BIOTECHNOLOGIES Ltd.BJS Biotechnologies was created to create and develop

ultra-high speed thermocycling technology and apply it to

PCR (Polymerase Chain Reaction) tests.

The Fastest qPCR thermal cycler in the World

With a thermal ramp rate of up to 10ºC per second, xxpress is the fastest, real-time thermal cycler in the world. Capable of

delivering 40 cycle qPCR in under 10 minutes. With ultra-low thermal mass and high conductivity, xxpress patented

resistive heating system delivers its performance more efficiently and with greater accuracy than conventional based

solutions.

The Most Thermally Accurate qPCR thermal cycler in the World

Thermal uniformity across all the samples to better than ±0.3ºC during cycling.An array of highly accurate infrared sensors to measure temperature in “sample”.A patented control algorithm adjusts the heating patterns at a rate of 100 times a second to ensure the thermal uniformity.

Intuitive User Interface designed by Biotechnologists for Biotechnologists

Xxpress has an intuitive touch screen user interface that has been designed to mimic the way biotechnologists develop

their experiments. The software guides the user through the experiment, selecting reagents, PCR type, plate format and

thermal profiles.

A range of test plate volumes ensures optimum reagent use

Based around a standard form, xx plates are inter-changeable and xxpress willrecognize which size is inserted and its orientation. The range of xx plates cover

sample volumes from 0.5μl to 40μl, allowing optimal use of reagents, sominimizing cost-per-test.

Outstanding Return on Investment (ROI)

Xxpress can do the work of up to 6 conventional thermal cyclers. With a cycle time of less than 10 minutes, up to 5

experiments can be completed per hour, more than 40 in a single shift.

52

The Ground Penetrating Radar (GPR) technology uses electromagnetic (EM) waves transmitted from an antenna (Tx)

which reflects on layers and objects in the ground. These reflections are received with an antenna (Rx) and create a

picture of the subsurface. As the transmitting and receiving antenna is moved along the surface, recordings are collected

and displayed side by side, resulting in a cross section, also known as radar profile.

GPR can be used in a variety of media including rock, soil, ice, fresh water, concrete, pavements and structures and it can

detect objects, voids, cracks and changes in material.

Mala is the leader in Ground Penetrating Radar (GPR)

MALÅ GPR (ground penetrating radar) for Infrastructure & Construction Applications

• Utility Location and Mapping • Underground storage Tank Locating• Void Detection• Road Layer Profiling• QA/QC of structures ( rebar/tension cables )• Foundation Investigations

Geotechnical & Environmental Applications

• Mapping, bedrock, soils and fill layers

• Snow and Ice mapping

• Hydrogeological survey

• Ground contamination surveys and monitoring

• Waste Dump mapping

Common Exploration & Mining Applications

• Bedrock mapping

• Ore delineation

• Volume estimation

• Placer deposits (alluvial mining)

• Mine Planning

• Mine safety

• Fracture analysis

Common Military and Police Applications

•

• Locating unmarked graves and human remains

• Locating concealed weapons and arms caches

• Locating concealed explosives

• Tunnel and chamber Locating

Common Archaeology & Cultural Heritage Applications

• General Site Mapping

• Locating artifacts

• Excavation mapping

• Structural assessment

Locating evidence

53

ABEM Resistivity and Induced Polarization Solutions

Resistivity/IP surveying is a versatile geophysical method that is suitable for a

broad range of applications.

ABEM Resistivity/IP solutions come prefigured for common applications ranging

from groundwater and mineral exploration to infrastructure site investigations,

and are customizable – using high-end multichannel 3D time-lapse monitoring or

cost effective VES measurements – to fit most other applications.

ABEM TEM Solutions

The transient electromagnetic (TEM or time domain electromagnetic TDEM)

method is extremely effective in determining electrical conductivity of the

subsurface at depths from a few meters down to several hundred meters. Since

electrical conductivity of soil correlates strongly with soil properties, TEM is a

powerful tool for mapping of conductive layers and is commonly used for

mapping sand and gravel aquifers, clay layers restricting groundwater flow,

conductive leachate in groundwater, saltwater intrusion, and depth to bedrock.

ABEM Seismic Solutions

The seismic method utilizes the reflection or refraction of sound waves off

interfaces to determine the geological substructure and is one of the oldest

geophysical methods, dating back to the 1800s.

Beginning in the 1920s, ABEM has pioneered the development of seismographs

for near-surface geophysical surveys from analogy to digital. The current ABEM

Terraloc line of seismographs is the most advanced combination of hardware

and software in its class, achieving superior data quality over the widest range of

applications possible.

ABEM – the global leader in geophysical solutions

ABEM’s technologies for the geophysical near surface market are used for surveys to evaluate soil conditions, detecting

and mapping groundwater, mineral exploration, infrastructure site investigations and locate hidden objects using methods

including resistivity, electromagnetics, seismology, vibration monitoring and radar. Their main clients are professional

consultants within the Ground Water mapping, Mineral Exploration and Civil Engineering but also governments, aid

organisations, universities and other consultants/contractors.

Next generation TEM solutionField effectiveness in every step

ABEM Terraloc Pro

Designed for all seismic surveys.

Optimized for near surface geophysics.

Engineered to fit most applicationsCustomizable to suit all

ABEM Vibration Monitoring Solutions

Ground-borne vibration can be generated by a number of sources, including

road and railways, construction activities such as piling, blasting and tunneling.

The parameter normally used to assess the ground vibration is the peak particle

velocity (ppv) expressed in millimeters per second mm/s).

The intelligent vibration monitorLets you know when there is a problem

54

ELICO Ltd is a leading Analytical Instruments Design & Manufacturing Company established in 1960. A wide range of instruments are being designed, developed and manufactured to be used in Agriculture, Research & Academia, Healthcare, Environmental, Pharmaceutical, Life Sciences, Chemical, Petrochemical, Steel, Cement and others. Apart from instrument development and manufacturing with its strong base of systems certified for ISO 9001, ISO 14001 & ISO 27001 standards, ELICO provides R&D and Manufacturing Services to Global Analytical Instrument Companies.

ELICO is continuously gaining value and knowledge to its legacy of Scientific innovation over 5 Decades by creating a wealth of Intellectual Property.

Electrochemistry Products• Water Quality Analyzer

• Digital pH Analyzer, pH meter

• Digital Conductivity meter, EC-TDS Analyzer, Dissolved Oxygen Analyzer

• ION Analyzer

• Polarographic Analyzer

Spectroscopy Products• True Double beam AAS

• Single beam AAS with manual gas control

• Fluoroscence Spectrophotometer

• Near Infra Red Spectrophotometer

• Double beam UV-VIS Spectrophotometer for water analysis

• Double beam UV-VIS Spectrophotometer

• Single beam UV-VIS Spectrophotometer

• Flame Photometer

• Visible Spectrophotometer

• Colorimeter / LED based Colorimeter

Chromatography Products• HPLC Binary System

• HPLC Isocratic System

• ICP-MS

The Analytical Instruments Business unit comprises of

pH Analyzer

Digital ConductivityMeter

Double beam AAS

Water Quality Analyzer

FluorescenceSpectrophotometer

HPLC Binary System NIR Spectrophotometer Flame Photometer Colorimeter

55

NETZSCH Technologies India Pvt. Ltd. The NETZSCH Group is a German company engaged in manufacturing of

machinery and Instruments with international presence backed by 127 sales and production centers in 23 countries of

three continents. NETZSCH Technologies India is a subsidiary of the NETZSCH Group with three independent business

units, Pumps & Systems, Grinding & Dispersing, and Analyzing & Testing. Thermal Analyzing & Testing with a wide variety

of instruments and services for state-of-the-art thermal applications in material R & D embody technological leadership,

expertise, and reliable quality for the user's benefit. They aim to fulfill the highest expectations of our Indian subcontinent

customers in line with business policy of NETZCSH Germany.

Differential Scanning Calorimetry (DSC)Differential Thermal Analysis (DTA)

-180°C to 2000°C

The various types of NETZSCH DSC instruments all operate in accordance with the heat flow principle. They are characterized by a three-dimensional symmetrical design with homogeneous heating. Sensors with high calorimetric sensitivity, short time constants and a condensation-free sample chamber in the DSC cell ensure high detection sensitivity.

The Broadest Portfolio for THERMAL ANALYSIS

Thermogravimetric Analysis (TGA)

10°C to 1100°C

NETZSCH TGA instruments are equipped with digital balances and are vertically designed, featuring a top-loading sample arrangement and direct temperature measurement at the sample.

Simultaneous Thermal Analysis (STA)TGA-DTA/TGA-DSC/TGA

-150°C to 2400°C

With the STA instrument series NETZSCH is setting high standards. Unlimited configurations and unmatched performance are the foundations for a great variety of application possibilities in fields such as ceramics, metals, plastics and composites over a broad temperature range.

Evolved Gas Analysis (EGA)

By coupling the thermal analysis instrument with a Quadrupole Mass ® ®

Spectrometer (QMS 403 D Aëolos or SKIMMER ), GC-MS or FT-IR (Fourier Transform Infrared Spectrometer by BRUKER Optics), the detection of evolved gases and identification of the separated components can be precisely time-correlated with the thermal analysis signals.

Dilatometry (DIL)

-180°C to 2800°C

When it comes to the determination of linear thermal expansion in solids, liquids, powders, pastes or fibers, the DIL 402 Expedis series of pushrod dilatometers leaves no measurement problem unsolved. The interchangeable furnaces cover all applications for high-precision expansion control in many fields, including high-tech ceramic and metallic materials in the areas of material development, basic research and quality control.

56

Dynamic Mechanical Analysis (DMA)

-170°C to 600°C

The robust construction of the DMA 242 and the high resolution of its deformation measuring system enable precise measurements on both very rigid and very soft samples. Its unparalleled variety of deformation types, digital signal filtering and frequency extrapolation make the DMA 242 the most versatile system available for measuring viscoelastic properties of polymers and composites.

High Force Dynamic Mechanical Analysis (DMA)

-150 to 1500 °C®The testing instruments of the EPLEXOR series enable the mechanical characterization

under high loads at temperatures up to 1500°C. Under such conditions properties such as rolling resistance of tires or fatigue testing of composites and adhesive joints can be investigated. The technique can be applied to a wide range of different materials: From elastomers, thermoplastics, composites, metals, glasses, and ceramics to biomaterials and even foods. The instruments can be equipped with a humidity generator and an automatic sample supply system for tension, compression, bending or shear mode.

Thermomechanical Analysis (TMA)

-150°C to 1550°C

The TMA 402 F1 and F3 Hyperion® have been developed for the highly precise measurement of dimensional changes to the specimen as a function of temperature under a defined load. A

®wide variety of sample holder types and a double furnace hoist make the Hyperion the most flexible TMA on the market.

Cure Monitoring by Dielectric Analysis (DEA)

-150°C to 350°C

For the investigation of thermosetting resins, composites, adhesives and paints, Dielectric Analysis has stood the test of time. An important value in describing curing processes is the ion conductivity. In order to address all possible needs, NETZSCH offers both single- and multiple-channel DEA systems.

Calorimetry (ARC/APTAC/MMC)

RT to 500°C

The MMC 274 Nexus is a diverse instrument platform with multiple calorimeters capable of testing samples using a variety of calorimetric methods including scanning (differential available), adiabatic and isothermal. Endotherms, exotherms, heat capacity, and sample pressures can be measured accurately on gram-sized samples and mixing and stirring are available. Additionally, our well-proven ARC 244/254 and APTAC 264, with the patented VariPhi technology, are high-end systems investigating data relevant to chemical process safety and battery safety and development.

57

Simultaneous Determination of Seebeck Coefficient and Electrical Conductivity

RT to 800°C

One approach in the field of thermoelectricity is to generate electrical energy from heat which has been released to the environment. For applications such as these, it is necessary to develop thermoelectric materials with high working temperatures and optimized efficiency. The

®SBA 458 Nemesis allows for the simultaneous measurement of the Seebeck coefficient and electrical conductivity under identical conditions.

Determination of Thermal Conductivity with Heat Flow Meter (HFM)

-30°C to 100°C

With the HFM 436 Lambda, the thermal conductivity of insulating materials can be measured. Patented plate temperature control yields unmatched testing speeds and highly accurate results. The Lambda instruments are ideal for QC/QA and conform to all required industrial standards.

Determination of Thermal Conductivity with Guarded Hot Plate (GHP)

-160°C to 250° C®The GHP 456 Titan allows for determination of the thermal conductivity of insulation materials

with outstanding reliability and accuracy across a broad temperature range. Innovative plate materials and temperature sensors, special design features and an improved data acquisition and control system make this GHP the new benchmark in the field of insulation testing.

Refractory Testing by RUL/HMOR/TCT/PCE

RT to 1700°C

Special strength-testing methods have been established for refractory ceramics. The Refractoriness under Load (RUL) and Creep in Compression (CIC) identify the deformation resistance of a test piece under a defined load and with a specified temperature/time program. The Hot Modulus of Rupture (HMOR) at high temperatures is determined as the amount of force applied to a rectangular test piece at high temperatures until failure occurs. The softening behavior of these heterogeneous ceramics is determined indirectly through comparison with Seger cones (PCE – Pyrometric Cone Equivalent). Thermal conductivity can be measured directly with the TCT 426.

Laser/Light Flash Analysis (LFA)

-125°C to 2800°C

Thermal conductivity and diffusivity are the most important thermophysical material parameters for the description of the heat transport properties of a material or component. The Laser/Light Flash technique has proven itself as a fast, versatile and precise absolute method for measuring thermal diffusivity. NETZSCH offers three LFA models, covering the widest temperature range for the broadest spectrum of materials.

58

X-Ray Fluorescence Spectrometer Inductively Coupled Plasma Spectrometer

TY-9800 XRF Spectrometer for Multi

Elemental Analysis

P9800 A Full Range of Laboratory with exceptional new levels of

performance

TY-9900 Unbeatable Sensitivity and Extreme Precision for all elements.

to their customers.

a vital partner in providing quality products to improve both safety and offer superior analysis

from small to large international companies in many different industries. JINYIBO is proud to be

delivered globally. Mainly CCD direct reading spectrometers, carbon & sulphur analysis

Since their inception,3 writings,12 senior engineers, over 6,000 instruments have been

CCD direct reading spectrometers has continued to exceed industry averages.

expanded their business rapidly all over the word since 2012. In addition, growth in the sales of

around the world and is listed as the clear market leader for metal analyzers. They have been

Founded in 1983 as a military-industrial-enterprise, JINYIBO today employs over 100 employees

providing new solutions and continuous innovations in China.

fields of applications for even routine operations. JINYIBO leads the progress in this field by

worldwide with the need for ultimate precision, complex system requirements, and expanding

analysis in widely applications Elemental analysis is continuing to develop at a fast pace

JINYIBO manufactures advanced instruments and delivers the best solutions for elemental

59

instruments, XRF spectrometers, ICP spectrometers. Their customer list covers the spectrum

Instrument

Carbon& Sulfur Analysis

CS-8820S The Newest 2 in 1

Instrument

& Sulfur Analytical

CS-8820 Better Carbon

Analytical Equipment

Carbon & Sulfur

CS-8800S High-end

Analysis

Instrument for C&S

Performance

CS-8800C High

Carbon & Sulfur Analyzer

Performance Metal Analyzer

W5 The 4th Generation High

Nonferrous Metal

W2 Designed Specifically for

Metal Analysis

W6 Ultimate Performance for

TY-9000 A Full Range of Solutions for the Entire Metals Industry

High-Stability for Metal

Quality, High-Performance,

TY-9610 Combine with High-

Optical Emission Spectrometer

60

Better, Faster Alloy Analysis

Application The JX5/JX5D Handheld Alloy Analyzer (XRF) is a boiler, container, pipe, manufacturing and other high temperature and high pressure industry in the production process of material reliability identification (PMI) important means.

Application JX8 can analyze Pb, Hg, Cd, Cr, Br and As(Can add)

1. RoHS detection and analysis 2. Detection for electroplating industries 3. Restricted toxic elements in consumer goods

Analyze Any Mineral, Any Element, Anyplace on the Planet Application JX6 can analyze K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Y, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Hf, Ta, W, Au, Hg, Pb, Bi, totally 30 standard elements JX6D can analyze Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Y, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Hf, Ta, W, Au, Hg, Pb, Bi, totally 36 kinds of standard elements.

1. Exact grade evaluation for high grade and beneficiated ores, then provide value foundation for ore trade, processing and recycling.

2. The relict ore element analysis in slag and tails to rejudge the value. 3. Judge ore vein trend and mineral boundary then manage and control mining to detect

mineral grade at any time.

ore, Lead-zinc ore 5. Small volume, fast and high precision. 6. The fastest analysis speed in the world, only 2s can identify mineral element.

steel, seamless steel). Iron-based alloy series (stainless steel, chromium/molybdenum alloy steel, low alloy steel, tool Metal identification / scrap metal sorting. the site. Nondestructive, rapid and accurate analysis of alloy elements and alloy grade identification on Sn, Sb, Hf, Ta, W, Re, Pb, Bi, totally 30 kinds of standard elements. JX5D can analyze Mg, Al, Si, P, S, V, Ti, Cr, Mn, Fe, Ni, Cu and zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Cd, Sn, Sb, Hf, Ta, W, Re, Pb, Bi, totally 25 kinds of standard elements. JX5 can analyze Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag,

61

JX5/JX5D Handheld Alloy Analyzer (XRF)

JX8 Handheld RoHS Analyzer Protector of RoHS & WEEE and Harmful Elements

JX6/JX6D Handheld Mineral Analyzer

4. Analysis of ore types : Iron ore,Copper, Chromium, Molybdenum, Tungsten, Tantalum

Nickel-based alloy series (nickel alloy, nickel/cobalt alloy). Cobalt-based alloy series. Titanium-based alloy series. Copper-based alloy Series (bronze, brass, copper and nickel alloy, etc.). High temperature alloys (molybdenum tungsten alloy). Aluminum-based alloy. Other alloys.

(4) Percentage content for other alloy.

(3)S value, percentage content for silver

(2)PT value, percentage content for platinum

(1)Karat value, percentage content for gold

Precious Metals elements and contents analyze

Precious Metals Grade identification

JX7 can analyze Fe, Co, Ni, Cu, Zn, Se, Ru, Rh, Pd, Ag, Cd, In, Ir, Pt, Au, Pb

Application

Better for Gold Platinum Silver

JX7 Handheld Precious Metal analyzers (XRF)

62

Maptek™ has stayed at the forefront of innovative mining technology for 35 years. They specialize in developing powerful

3D visualization software to help mining professionals better understand their data. Maptek remains committed to

providing solutions across the entire mining value chain.

Maptek Vulcan

Maptek Vulcan, the premier 3D mining software solution, allows users to validate and transform raw geological data into dynamic 3D models, accurate mine designs and operating plans. Test mining scenarios on the desktop before mining begins.

Maptek I-Site

Maptek I-Site provides efficient high technology survey solutions. The integrated hardware-software system brings 3D laser scanning, high resolution digital imaging and advanced software processing to industrial survey applications.

Maptek Evolution

Maptek Evolution open pit mine scheduling maximizes value without compromising operations. The solution uses enterprise level schedule optimization techniques.

Maptek BlastLogic

Maptek BlastLogic increases drill and blast accuracy via automated validation and design tools. This solution helps pre-empt risk, productivity and cost issues, and provides data for continuous improvement.

Maptek Eureka

Maptek Eureka allows exploration geologists to visualise and interpret all available geospatial data. Drilling, seismic, gravity and magnetic data, can be displayed dynamically in 3D to help drive discovery and generate accurate resource models.

Maptek PerfectDig

Maptek PerfectDig is an easy-to-use system for rapidly evaluating and supporting design conformance. It allows all stakeholders to quickly compare as-builts with designs in the field and fosters real-time decision making.

Maptek Sentry

Maptek Sentry is an intuitive visualisation and trend analysis tool for better understanding surface movements in a mining environment.

63

WHY ImageProVision ?

analysis and classification.

ipvPSA – Microscopic Particle Size Analyzer

R&D and Manufacturing Plants.

all dosage forms. Comprehensive modules with 21CFR Part 11 compliance make these products suitable for usage in

ImageProVision has launched array of innovative products for Pharmaceutical Industry. Products are capable to analyze

Products for Pharmaceutical Industry

Innovation Multi domain Speed

Recognition of excellence by various awards.

Leadership involvement in all engagements.

Uncompromised standards of support with Executive.

Objective of serving product with reduced time, cost and manual effort.

Innovative technologies with bespoken customization for improved operational performance.

Streamlining of processes.

Proven track records in different verticals of industry.

Highly differentiated, industry-based business solution at low cost and accurate results.

collaborate with organizations of all magnitudes.

solution and quick services. We have extensive relationship with some of the world’s leading companies and we

ImageProVision’s products are 21CFR Part 11 compliant, widely known for delivering high quality

efficient solutions at competitive cost.

established organizations to benefit their research and product development. Their aim lies in providing accurate and

image analytics to a different height by disrupting the status quo.ImageProVision has partnered with many well

method of image analysis has contributed more to the prevailing belief. On the contrary, ImageProVision has taken

The automated processing and analysis of images is often believed to be a field of niche application. The traditional

industrial segments like pharmaceutical, medical, life sciences, agriculture, packaging, chemical, manufacturing, etc.

ImageProVision is a leading Indian company in Image analytics arena. Their products and services cater to various

About us

64

ipvPSA is the one of the first innovations of ImageProVision Technology. It is a basic software model for particle size

SEED, GRAIN & FRUIT ANLYSER:

Individual Seed weight

Geometric mean diameter, Shape factor,

Width, height, volume, surface area, Aspect ratio, Density, Roundness, Sphericity, Arithmetic mean diameter,

Software constructs 3D view of the seeds and computes various physical properties of seeds such as, Length,

automatically taken by software.

Top and side camera captures 2 view images of the seed placed on backlight and the seed weight is

Setup includes weighing machine, backlight platform for seed, top and side camera placed in container box.

System comprises the seed analyser setup unit and the software.

Available in 2D and 3D models

Products for Agriculture Industry

system.

cartons, leaflets and labels. The software has digital “pdf to pdf” and print “pdf to Scan” art works embedded in the

ipvProofCheck – Smart Proof Reading System

thereby providing data related to particle size and particle size distribution.

ipvPSD – Microscopic Particle Size Distribution

the basis of melting point and other transition during heating.

and time. Along with particle size and particle morphology, the software gives useful information about the sample on

ipvPHot – Hot Stage Microscopy Analyser

ipvMicrobe to generate a report with form, size, colour and count of microbes under study.

data. The setup involves capturing of a petri dish image and a microscopic image. The images are used as an input for

ipvMicrobe – Microscopic Microbial Analyser

of the filter paper are used as an input to the software in which the analysis is done and results are interpreted.

of a trinocular microscope along with a high resolution camera integrated with software ipvPCount. Microscopic images

ipvPCount - Microscopic Particulate Matter Counter

volumetric method.

distributions, shapes & textures of particles under study. The latest feature of ipvPClass inclubed analysis based on

software and a camera. Apart from identification of isolated particles and agglomerations, the software analyzes size

ipvPClass – Microscopic Particle Classifier

65

ipvPClass is compact and reliable microscopic particle analyzer and classifier that includes a digital microscope, a

ipvPCount is a one stop solution for calculating the amount of particulate matter in parenteral drugs. The set up consists

ipvMicrobe is a system which is a step ahead of conventional microbial counter in providing accurate and quantitative

ipvPHot integrates microscopy with thermal analysis that enables the study of materials as a function of temperature

ipvPSD holds its significance in various segments. The software is coupled with a suitable microscope and a camera

ipvProofCheck is a smart proof reading system providing pixel to pixel comparison based identication for analysis of

SEMEN ANALYSER :

NEMATODE ANALYSER:

LEAF ANALYSER:

PLANT CELL COUNTER:

PLANT POLLEN ANLYSER:

Can be used for ACI and HOST tests

Computes the post-thaw motility

Classifies the sperms into different category of speed and motion type and computes the initial semen motility

Finds the motion (linear/circular)

Computes the speed of each sperm

Catches the same sperm if it is hidden or disappeared for some time

Identifies each sperm in the vide

System captures semen video using the camera attached to microscope

System consists of the digital microscope and stage warmer

Android version of Leaf Analyser is available for mobile application.

software stitches the leaf automatically.

Long leaf parameter measurement can be done in non-destructive way. User can mark lines on long leaf and

Leaf is not required to cut/crop from the tree.

the leaf such as Leaf Area, Leaf Length, Leaf Width, Leaf Shape Factor, Leaf Aspect Ratio

Leaf can be placed under the setup. The software captures the image & analyses various physical parameters of

The system includes portable camera set and the software.

Software computes physical parameters of nematodes like, Length, Breadth, Color etc.

Software counts overlapped nematodes.

The software identifies and counts live / dead nematodes.

Software analyses the video captured by the camera for motility and quality analysis.

Useful in Nematode counting and analysis.

Computes cell size, size distribution and other statistics.

Software identifies squares in grid and calculates cell count/ml.

Captures images of different views.

Sample taken on hemocytometer.

Microscopic analysis

Customized reports with graphical representation are generated.

Fertile, Partial Fertile and Sterile pollens are identified and reported.

Pollens can be classified based on size, shape, colour and texture.

Software automatically counts pollens

Microscopic images are captured by high resolution camera attached to microscope.

Pollens are placed on glass slide under microscope.

Microscopy based analysis

66

SPORE ANALYSER:

3D Vision

3D Shape Analysis

3D Object Retrieval

3D Data Acquisition

3D Image Analysis and Solution

Satellite Image Processing

UMV controls

Classification

Land Mine Detection &

Bullet angular velocity

Blast Intensity profile

Defence Applications

and Classification

Microscopic Particle Analysis

Semen Analysis

Video Processing Solutions

Skin Texture Analysis

Ophthalmology

Cancer Diagnosis

Digital Pathology

Medical Imaging Solutions:

Yeast-Bacteria Classifier

Analyzer

Decanter Contamination

Sucro-crystal Image Analyzer

Sugar Industry:

Anthropometric Analyzer

Magnet Inspection

Security Inspection

Switch Inspection

Sensor Inspection

Seal Inspection

Bearing Inspection

Manufacturing Industry:

Products catering to other Industries

Computes the total Spore count in all the grids.

Computes the vitality of the Spores

Counts the live Spores and dead Spores

Counts and classifies the Spores on morphology

Identifies the Spores within the unit grid area.

Software identifies the grids automatically

Used in Animal Pathology

67

Labtron Equipment Ltd is a well renowned UK based company. They are the leading manufacturers

of Laboratory Equipment providing world class products known for their Quality, Affordability and

Durability.Their R&D, Production and Quality Assurance team work mutually with sheer

determination to provide a diverse range of products for Educational Institutions, Pharmaceutical

Industries, Chemical Industries, Biotechnology and Medical Research Laboratories.

Pilot Freezer Dryer

Dryer

Large Scale Freezer

Freezer Dryer

Laboratory Floor Model

Freezer Dryer

Laboratory Bench-top

FREEZE DRYERS

Liquid Nitrogen Freezer

-40° C Upright Freezers

-40°C Chest Freezer

Blood Plasma Freezer

FREEZERS

Centrifuge

Vaccum Concentrator

Refrigerated Centrifuge

Mini Centrifuge

Low Speed Centrifuge

CENTRIFUGE

68

Incubator

Water Jacketed CO2

Incubator

Air Jacketed CO2

Vacuum Oven

Drying Oven

OVEN CO2 INCUBATOR

Flake Ice Makers

Cube Ice Makers

Moisture Analyzer

Flame Photometer

FLAME PHOTOMETER MOISTURE ANALYZER ICE MAKERS

Vertical Autoclave

Table Top Autoclave

Portable Autoclave

Horizontal Autoclave

AUTOCLAVES

1250°C Muffle Furnace

1200°C Muffle Furnace

1100°C Muffle Furnace

950°C Muffle Furnace

MUFFLE FURNACE

69

TOC Analyzer LTOC-A10

Microwave Digestion System LMWD-A10

MICROWAVE DIGESTION SYSTEM TOC ANALYZER

analyzer LSPA-A10

Spray particle size

analyzer

Nano-particle size

Laser particle size analyzer

and size analyzer

Image particle shape

PARTICLE SIZE ANALYZER

Graphite Digester

Kjeldahl Analyzer

Cleaner

Industrial Ultrasonic

Cleaner

Digital Ultrasonic

ULTASONIC CLEANER KJELDAHL SYSTEMS

Walk-in Fumehood

Ducted Fumehood

Spectral Colorimeter

Colorimeter

COLORIMETER FUME HOOD

70

Laboratory Equipment

Their product portfolio comprises as below.

products arrive at your premises quickly and in the condition that you expect.

manufacturers of Scientific Equipment. An experienced picking and packing team ensure that

have extensive warehousing near the center of London, holding stocks of the world’s leading

business needs to effectively source and supply a broad selection of Scientific Equipment.They

meet the needs of any modern laboratory.They provide all the capabilities which your growing

A.J. Cope are one of the UK’s leading independent suppliers of laboratory goods and are able to

Anaerobic Systems Brush Washers Baths Block Heaters

Desiccators Dewars Diluters Circulators

71

Incubators Microbiological Air Samplers

Electrophoresis Equipment

Fermentation Equipment

Microtitration Equipment

Radiation Monitoring & Shields

Rotary Evaporators Sample Concentators

Sampling Equipment Shakers & Rotators Stirrers Viscosity Equipment

Water Deionisers Water Testing

Equipment Waterstills

72

Gauges Barometers & Weather

Stations Burettes Chart Recorders

Colorimeters Counters Flame Photometers Flame Tests

Polarimeters Refractometers Karl Fisher Apparatus Melting Point

Apparatus

73

Laboratory Instruments

B-150 series, designed to fulfill all requirements ofeducational laboratories.The available models allow a pleasant and effectiveapproach to the world of microscopy.The quality of the optics, the reliability of themechanical parts and the excellent price/quality ratiorank these instruments at the top of their category.

Laboratory Microscopes

B-1000 series, thanks to the long experience achievedin microscopy development, has conceived the new B-1000: a major leap in our technological offer.As a flagship instrument, B-1000 originates fromcustomer most demanding feedbacks and needs. Itsmodularity and versatility will allow to find the perfectplace in any clinical or basic research laboratory.

Industrial Microscope

Different industrial applications make different demands of microscopes.Thanks to the modular design of our stereo microscopes, we can provide a customized solution for any application. To complete Industrial request we have our metallurgicalinstruments based on specific metallurgical infinity opticalsystem.

Digital Microscopes and Cameras

A wide range of instruments fulfilling any requirement in the photo/video field. It has never been so easy to get impressive images from your microscope. Thanks to different resolutions, all digital cameras (to be used withPC or TV set) can meet the demands of either aprofessional user or people who are looking for an economic butvaluable product.

instrumentation, is worldwide known as a leading Company for optical microscopes’ production and distribution.

OPTIKA Microscopes, with its almost 40 years’ experience in the field of scientific

OPTIKA Microscopes offers a range of more than 80 microscopes’ models which are fully accessorized andsuitable for the different fields of optical microscopy. Educational Microscopes:

B-190 series, the result of a perfect fusionbetween years of experience in microscopy’s fieldand a refined design study.This series presents our philosophy at its best:quality, reliability and innovation.The B-190 series is the OPTIKA Microscopes’answer to the challenge of the future ofmicroscopy in teaching field.

74

critical applications

and humidity transmitter for

testo 6681 - Temperature

transmitter

conditioning humidity

testo 6621 - The air

instrument

Humidity measuring

testo 635-1 -

barometer

hygrometer and

testo 622 - Digital

HUMIDITY STATIONARY MEASURING SYSTEM

Testo 330i advanced set

analyser

Testo 340 – Flue gas

Leak Detector

Testo 316-2 Gas

Mointor

Testo 317-3 CO

GAS ANALYZER

cement and power, automobile, food and beverages, pharmaceutical and biotech.

refrigeration, airflow, and environmental monitoring instruments for markets as diverse as

become a major supplier for HVAC industries,

combustion efficiency analyzers and as also

leading worldwide manufacturer of portable

industry. In addition, testo is recognized as the

provide the best quality, service and value in the

engineering experience, their mission is to

more than 59 years of measurement

test and measuring instruments. Backed by

development and manufacturing of portable

TESTO AG is a world leader in design,

75

instrument

temperature measuring

testo 845 - Infrared

temperature gun

testo 830-T1 - infrared

thermometer

testo 108 - Digital food

instrument

measuring

temperature

Multichannel

testo 735-2 -

TEMPERATURE – CONTACT TEMPERATURE NON– CONTACT

with clear display

and humidity data logger

testo 176 H1 - Temperature

testo 184 T1

humidity data logger

Temperature and

testo 175 H1 -

logger

temperature data

testo 174 T - Mini

DATA LOGGERS

leak detector

testo 316-3 - Refrigerant

(up to 2.5 hPa)

measuring instrument

Differential pressure

testo 521-3 -

level digital manifold

testo 549 - entry-

instrument

measuring

and flow velocity

testo 512 - Pressure

PRESSURE & REFRIGERATION

and air flow meter

temperature, humidity

testo 480 - Digital

with a telescopic vane

testo 416 - Air flow meter

digital camera

Thermal imager with

testo 875-2i -

Camera

testo 882 - IR

THERMAL IMAGERS VELOCITY

76

measurements

for ambient

and CO2 monitor

testo 315-3 - CO

tachometer

testo 470 - Digital

sound level measurement

testo 816-1 - dB meter for

storage

instrument with data

intensity measuring

testo 545 - Light

LIGHT/SOUND/ RPM/ CO2

calibrator

Thermator – Temperature

calibrator

Huminator –humidity

smartphone operation

thermometer with

testo 905 i -

operation

smartphone

thermometer with

testo 115 i - clamp

SMART PROBE CALIBRATORS

meter

testo 770-2 - Clamp

voltage tester

testo 745 - Non-contact

thermometer

testo 810 - IR

material moisture

Moisture meter for

Pocket sized

testo 606-1 -

POCKETLINE ELECTRIC MEASUREMENT

77

AIIPLTECH WORLDWIDE CUSTOMERS

78

Mission-Vision

Set highest benchmarks for customer satisfaction

Create long term sustainable and

profitable business

Develop local capability within customers vicinity

through right channel

Intensively educate customers on benefits

attached with Aiipltech

To develop demarcated and long term inclusive channel - customer partnership

To be the most satisfied and preferred choice for customers

TrustTransparencyIntegrity

Maximize reach Educate customers Resolve site challenges

To progressively increase market share

Agility in ResponsePro-ActivenessContinuous Skill

DevelopmentPatience & Right

AttitudeExcellent Post Sales

SupportAgility in ResponsePro-Activeness

Continuous Skill Development

Excellent Post Sales Support

Exceptional Experience to Customers - Partners

Your Success is our Mission

A World of INSTRUMENTATION in your hands

79

AIIP

LP

P/1

6-1

7/0

1/0

3M

arC

om

Cre

atio

n

Our Registered Office Address:Aiipltech Pvt. Ltd.Formerly as, Aimil International Instruments (P) Ltd.Naimex House, A-8, Mohan Cooperative Industrial Estate, Mathura Road, New Delhi - 110044, (INDIA)

Our Contact Office Address:Aiipltech Pvt. Ltd.Formerly as, Aimil International Instruments (P) Ltd.BSEL Tech Park, B-Wing, 11th Floor, Sector – 30A, Opp. Vashi Railway Station, Vashi, Navi Mumbai – 400705, Maharashtra, (INDIA)Tel : +91 22 3964 6701E-mail : info@aimil-iipl.com

Our Associates:Aimil Ltd.Naimex House, A-8, Mohan Cooperative Industrial Estate, Mathura Road, New Delhi - 110 044 (INDIA)Website : www.aimil.com

NAIMEXPlot No: 59 H (A), NSEZ, Noida Phase II, Uttar Pradesh 201 305 (INDIA)Website : www.aimil.com

Our African Office Address:Aiipltech Pvt. Ltd.Formerly as, Aimil International Instruments (P) Ltd.Plot 129,Unit A, First Floor, Kgale Court, Gaborone International Finance ParkP.O. Box 3568 Gaborone, BotswanaTel : +267 3104993Cell: +267 71504643 / 73114643E-mail : rkpillai@aimil-iipl.com

Our Hallmarks of Quality

A commitment to quality and strong focus on customer-needs is what sets apart Aimil from others.

Our commitment to Quality is manifested in many ways - from our Products, Services, processes and Systems we follow.

Aiipltech Distributors & Partners in:

80

MYANMAR – VIETNAM – PHILIPPINES – MALAYSIANIGERIA – MALI – RWANDA – BURUNDI – ZAMBIA – BOTSWANA –

SOUTH AFRICA – ZIMBABWE – NAMIBIA – ANGOLA – SUDAN – MOZAMBIQUE – SWAZILAND – TANZANIA –

AFGHANISTAN – UAE – JORDAN – OMAN – QATAR – SAUDI ARABIA – KUWAIT – BRAZIL – RUSSIA – KAZAKHSTANETHIOPIA – UGANDA – KENYA – BURKINO FASO – MALDIVES – MAURITIUS– MALAWI – GHANA –