1/09

Equipment list Format ASECT A - UNIT SPECS 9

A. UNIT SPECIFICATIONSRig Type Baker Marine BMC 150 H Class Independent Leg.Unit/Design/Shape: Independent Leg / Open Truss / TriangularUnit Flag:Unit Classification: ABS + A1 Maltese CrossIMO Certification: yes/no

Which code version:Year of Construction: 1983Construction Yard: South Africa.

A1. MAIN DIMENSIONS/TECHNICAL DESCRIPTIONLight ship in It: 10111 KIPSDisplacement at loadline in lt: 12347 KIPS CANS FLOODEDOverall length of unit (including helideck) in ft: 219' 6 1/2"Overall width of unit (including anchor racks) in ft: 162' - 6 1/2"Hull length in ft: 174' - 1/4"Hull width in ft: 162' - 6 1/2"Hull depth in ft: 18' - 0"Number of legs/length: no x ft. 3 x 250'Type of leg: Triangular / open trussLeg spacing (center to center): 106' 3 1/4"

Transverse in ft: 110' Longitudinal in ft: 120'Independent leg or mat: Independent LegSpud can diameter/bearing area: ft x ft2 34' 9 3/4"Spud can height in ft: 12 FTSpud can jetting system: YES Bottom jets: YES Top jets: NOMat dimensions: N/A Length in ft:

Width in ft:Depth in ft:

Cantilever or slot: CantilverSkid-off: YESCantilever envelope:Reach AFT, from/to: ft/ft Hull Transom / 40' Aft.Transverse, port/STB: ft/ft 10' to port/starboard of hull centerlineSlot dimensions:

Length in ft: 40'Width in ft: 20'

Mat slot dimensions: N / ALength in ft:Width in ft:

Max. cantilever load:(combined hood+rotary+setback): st. 500 st. (1,000,000 lbs.)

Max. rotary load: st. 375 st. (750,000 lbs.)Max. setback load: st. 250 st. (500,000 lbs.)Fuel consumptions (avg. drilling): bbl/day 70 BBLS

1/09

Equipment list Format ASECT A - UNIT SPECS 9

Accommodation for maximum no. personne no. 76(see K.2.1.):

A.2. STORAGE CAPACITIESFuel (bbls): 1656Drilling water (bbls): 3373Potable water (bbls): 1186Mud processing tank in bbls (see F.2):Active liquid mud in bbls (see F.2):Independent oil base mud storage (bbls): NO Agitated: YES Independent base oil storage (bbls): NOIndependent brine storage (bbls): NO

Heavy brine accepted (e.g. bromide): YES Bulk bentonite/barite (see F.3) in ft3 3600Bulk Cement (see F.3) in ft3: 3600Sack storage (sacks): 2000Pipe rack (sp ft): Upper rack dimensions: ft x ft 52' 8"W x 45' L Maximum load capacity: lb/ft2 400 LB/FT2 Lower rack dimension: ft x ft Port-17'8"Wx36' L STBD. 10'Wx33'L Maximum load capacity: lb/ft2 400 LB/FT2 Other rack: ft x ft Maximum load capacity: lb/ft2Miscellaneous storage area (sq ft): Operator sotrage area (sq ft):Preload capacity in kips: 7595 Time to fill and dump preload in hrs: 18 HR. MIN.

A.3. JACKUP SYSTEMSA.3.1 Jacking Systems

Make/type: BAKER MARINENo. of jacks or pinions: no. 18Maximum jacking load in kips: 3224Jacking Speed: ft/min 1 FT/MINRack chocks available: YES Required for field tow: NO

Required for ocean tow: YES

A.3.2 Raw Water SystemsPump location (water tower or leg):Suction distance below hull in ft. (max.):Pump location (water tower or leg):Suction distance below hull in ft. (max.): Salt water service pump: Quantity: no. YES 3 Make/Type CROWN SH-1000

Capacity: bbl/min 24 BBLS "@" pressure: psi 120 Horsepower: hp 75

1/09

Equipment list Format ASECT A - UNIT SPECS 9

Dedicated preload pumps: SAME AS ABOVE

Quantity: no.Make/Type:Capacity: bbl/min

"@" pressure: psiHorsepower: hp

A.4. OPERATIONAL CAPABILITIESMaximum designed water depth capability (ft): 150 FTOutfitted max. water depth capability (ft):Normal min. water depth capability (ft): 14 FTDraft at load line (deepest) in ft: 12 FTDrilling depth capability (rated) (ft): 25000 FTTransit speed towed - historical average (knots): 4 KNOTSLeg (spud can) below hull in transit (ft): 2 FTMaximum leg length permitted in tow:

Ocean tow (ft):Field tow (ft):

Number of tugs for field tow: no. 3 4200 hpAssociated minimum bollard pull per tug in It: 50 TONSAnti-roll sytem: NOMaximum preload reaction per leg (It): 5555 KIPSThrusters: NO

Quantity: no.Fixed/Azimuthing:Total horsepower per thruster: hp

A.5. VARIABLE LOADING (VL)Transit VL capacity (lt): 2236 KIPSDrilling VL capacity (lt): 4178 KIPS INC. 1000 HOOK LOADSurvival VL capacity (lt): 2178 KIPS

A.6. ENVIRONMENTAL LIMITSTransit Max. wave height (ft): Max. wave period (sec): Max. wind velocity (knots): 70 Max. current velocity (knots):

Max. heave - double amplitude (ft): Max. pitch - double amplitude (deg): 6 DEG. AND NOT LESS THAN 10 FT PER SEC. Max. roll - double amplitude (deg):

Working water depth (ft): 150 FT.

Drilling Air gap below bottom of main hull (ft): 30 Max. wave height (ft): 35 Max. wave period (sec): 10 Max. wind velocity (knots): 70 Max. current velocity (knots): 0

1/09

Equipment list Format ASECT A - UNIT SPECS 9

Survival Air gap below bottom of mail hull (ft): 40 Max. wave height (ft): 45 Max. wave period (sec): 14 Max. wind velocity (knots): 100 Max. current velocity (knots): 0 Working water depth (ft): 150 FT

A.7. MOORING SYSTEM N/AA.7.1 Anchor Winches

Quantity:Make/Model:Type (electric/hydraulic/diesel):Total HP per winch:Rated pull (ft/min):Control locations (local/remote/both):

A.7.2 Anchors N/AQuantity Make: Type: Weight:

A.7.3 Anchors Lines N/AWire Quantity (installed / spare): Make/Type: Construction: Diameter (inches): Useful length - nominal (ft):

A.7.4 Towing Gear Towing bridle size (in): 2" Hook-up system: yes Rating (lt) 75 ton Spare Bridle: no

A.7.5 Supply Vessel Mooring System System description: 4" MOORING LINE ATTACHED TO LEGS Rating (lt): Location (port/stbd/both): BOTH

A.8. MARINE LOADING HOSESLocations of loading manifolds (port/stbd/both):

A.8.1 Potable Water HoseQuantity: 1Size (inches): 3"Make/Type: COOPERColor coding: YES

1/09

Equipment list Format ASECT A - UNIT SPECS 9

Make/Type connection: CAMLOCKS

A.8.2 Drilling Water HoseQuantity: 1Size (inches): 4"Make/Type: COOPERColor coding: YESMake/Type connection: CAMLOCKS

A.8.3 Gas Oil HoseQuantity: 1Size: 3"Make/Type: COOPERColor coding: YESMake/Type connection: CAMLOCKS & TODO-MATIC

A.8.4 Mud Chemical HoseQuantity: 1Size: 4"Make/Type: COOPER Color coding: YESMake/Type connection: CAMLOCKS

A.8.5 Cement HoseQuantity: 1Size: 4" Make/Type: COOPERColor coding: yes/noMake/Type connection: CAMLOCKS

A.8.6 Base Oil Hose/LIQUID MUDQuantity: 1Size: 4" Make/Type: COOPERColor coding: yes/noMake/Type connection: CAMLOCKS

A.8.7 Brine HoseQuantity:Size:Make/Type:Color coding: yes/noMake/Type connection:

A.8.8 OtherQuantity:Size:Make/Type:Color Coding: yes/noMake/Type connection:

A.9. CRANES, HOISTS, AND MATERIALS HANDLING

1/09

Equipment list Format ASECT A - UNIT SPECS 9

A.9.1 Cranes, Revolving, MainQuantity: 2Specification (API, etc) ABS. USCG REG.Make: LETOURNEAUType: PCM 120Location (stbd, port, aft, frwd): PORT & STBDBoom Length (ft): 100 FTHook reach below main deck - block/whip (ft/ft): 1000FT CABLEBlock capacities and hoisting speeds Load/radius/speed - minimum radius (lt/ft(ft/sec)): 46,000LBS. @ 25FT. 2 FT. PER SEC. Load/radius/speed - maximum radius (lt/ft/ft/sec)): 11,000 LBS. @ 103.5FT. 2 FT. PER SEC.Whip capacity/hoist speed - ld/rad./spd (lt/ft(ft/sec)): N/AHook load indicator automatically corrected for boom angle: YES Alarm (audible,visual,both): BOTHAutomatic brake: YES Safety latch on hooks: YES Crown saver (limit switch): YES Boom illumination: YES

A.9.2 Forklifts HysterQuantity: 1Make/Type:Rated capacity (lt): 4000LBSExplosion proof: yes/no ELECTRIC

A.9.3 Monorail Overhead Cranes N/AQuantity:Make:Type:Rated capacity (st):Location(s):

Quantity:Make:Type:Rated capacity (st):Location(s):

Quantity:Make:Type:Rated capacity (st):Location(s):

A.9.4 Air Hoists/Derrick Winches

A.9.4.1.Rig Floor Winches (non man-riding)Quantity: 2Make: INGERSOL RANDType: K6UL

1/09

Equipment list Format ASECT A - UNIT SPECS 9

Rated capacity (lt): 10,000 LBSWire diameter (inches): 3/4"Automatic brakes: NO Overload protection: NO Automatic spooling: NO

Quantity: 1Make: INGERSOL RANDType: K4URated capacity (lt): 7,000 LBSWire diameter (inches): 1/2"Automatic brakes: NOOverload protection: NOAutomatic spooling: NO

A.9.4.2.Monkey Board Work WinchQuantity: 1Make: AIRDYNEType: AD1Rated capacity (lt): 1000 LBSWire diameter (inches): 3/8"Automatic brakes: YES Overload protection: NO

A.9.4.3.Under Rig floor "Man-Riding" WinchQuantity: 1Make: INGERSOL RANDType: FA2BMR-RMKIGRated capacity (lt): 2500 LB PULLWire diameter (inches): 1/2" Non-twist wire: YES Automatic brakes: YESOverload protection: NOAutomatic spooling: NOCertified for man-riding: YES

A.9.4.3.Rig floor "Man-Riding" WinchQuantity: 1Make: RAM Type: ML336A-250-38Rated capacity (lt): 397 LBS. @72PSI STALL PULLWire diameter (inches): 1/2" Non-twist wire: YES Automatic brakes: YESOverload protection: YESAutomatic spooling: NOCertified for man-riding: YES

A.9.4.4 Utility Winch (i.e. Deck Winch)Quantity: 2Make: INGERSOL RANDType: HU 40Rated capacity (lt): 4000 LBS

1/09

Equipment list Format ASECT A - UNIT SPECS 9

Wire diameter (inches): 1/2"Automatic brakes: NOOverload protection: NOAutomatic spooling: NOCertified for man-riding: NOLocations: SUBSTRUCTURE

Quantity: 1Make: INGERSOL RANDType: FA5ALXK1 4 DRUMRated capacity (lt): 10,000 LBSWire diameter (inches): 1/2"Automatic brakes: YES Overload protection: NOAutomatic spooling: NOCertified for man-riding: YES Locations: SUBSTRUCTURE FOR TEXAS DECK

A.9.4.5 BOP Hoists (see E.10.1) A.9.5 Transfer Baskets/Containers

A.9.5.1 Personnel Tranfer Baskets 2 EACH BILLY PUGH X871

A.9.5.2 Cargo Containers

Quantity: 3 EACHMake/type: 4'x4'x8' 4415 LBS. GROSS WEIGHT Quantity:Make/type:

Quantity:Make/type:

Quantity:Make/type:

A.10 HELICOPTER LANDING DECKLocation (frwd/aft/port/stbd): FORWARDDimensions (ft x ft): 62 FT x 62 FTPerimeter safety net: YESDeck load capacity (lb/ft2):Maximum helicopter weight (lbs):Designed for helicopter type: SIKORSKI S-61 OR EQUALTie down points: YES Covered by foam fire system: YES PORTABLE

A.10.1 Helicopter Refueling System NONESystem make/type:Fuel storage capacity (USG)Jettisonable: yes/no

1/09

Equipment list Format ASECT A - UNIT SPECS 9

Fuel transport containers (qty): Volume each (USG):Fuel transport containers (qty): Volume each (USG):Covered by foam fire system: YES Fixed System

A.11 AUXILIARY EQUIPMENT

A.11.1 Water DistillationQuantity:Make/Type:Capacity -each/total (cu ft per day):

Quantity:Make/Type:Capacity - total system (lbs/hr):

A.11.2 BoilersQuantity:Make/Type:Capacity - total system (lbs/hr):

Quantity:Make/Type:Capacity - total system (lbs/hr):

A.11.3 Air Conditioning:Quantity: ALL QUARTERS AND SCR ROOMSMake/Type: CARRIERCapacity - total system (tons):

A.11.4 Electric Welding SetsQuantity: 2Current Capacity (amps): 500 AMPMake/Model: MILLER SRH-444 Type (fixed/portable): FIXED WITH OUTLETS DIFFERENT POINTS

Emergency stops ON RIG FLOOR

A.11.5 High Pressure CleanerQuantity: 2Make/Type: AQUA- PROElectric/pneumatic/diesel: ELECTRICMax. delivered pressure (psi): 1500 PSI With steam: NO

Quantity: 1Make/Type: PSC Cleaning System MOD:EOS429K448A-EX1480Electric/pneumatic/diesel: ELECTRICMax. delivered pressure (psi): 450 to 3000 PSI With steam: HOT WATER

B. GENERAL RIG SPECIFICATIONS

B.1. DERRICK AND SUBSTRUCTURE

B.1.1 Derrick/MastMake/Type: DrecoRated for wind speed 110 / 125 m.p.h. With full setback (knots): With no setback (knots):Height (ft): 147'Dimensions of base (ft x ft): 30' x 30'Dimensions of crown (ft x ft): 14' x 14'Gross nominal capacity (lt): 1,333,000 lbs.Static hook load (lbs): 1,000,000Maximum number of lines (no.): 12Ladders with safety cages and rests: yes/no YESPlatform for crown sheave access: yes/no YESCounter balance, system for rig tongs and pipe spinning tong: yes/no YESLighting system explosion proof: yes/no NO

B.1.2. Racking platformMake/Type:Total current simultaneous capacity - drill pipe 5" DP (ft): 18,500FT 6 - 5/8" DP (ft): 15,000 FT 3 - 1/2" DP (ft): 20,500 FTTotal current simultaneous capacity - drill pipe 8" DC (ft): 550 FT 9" DC (ft): 480 FTTubing belly board: yes/no YES

B.1.4. Casing Stabbing Board YESMake/Type: DERRICK D302AAdjustable from/to height above rotary (ft/ft): 24 FT to 60 FT

B.1.5 SubstructureMake/Type: BAKER MARINEDrill floor height above main deck (ft): 36' - 0"Length (ft): 42.5 FTWidth (ft): 54.5 FTSetback capacity (kips): 500 Kips.Simultaneous setback + hookload capacity (kips): 500 Kips.Clear height below R/table beams (to main deck) in ft: 28 FT 6"

B.1.6 Weather ProofingRig floor windbreaks: yes/no YESDerrickman windbreaks: yes/no YES (removable tarps)Around process pits: yes/no YES

B.1.7. Derrick TV Camera System

Camera located at: 10 FT ABOVE MONKEY BOARDMake/Type: ACADIANA OIFIELD INSTRUMENTSZoom/Pan/Tilt-funtion: yes/no YESMonitor located at: Drillers Console

B.2. DRAWWORKS AND ASSOCIATED EQUIPMENTB.2.1. Drawworks

Make/Type: IDECO 2100-E Single DrumMotors make/type: D-79 EMD Quantity: 2Rated input power (hp): 1000 h.p. each x 2 = 2000 h.p.

Drum size (diameter x length): in x in 31" x 58"Drum type (grooved/smooth): Grooved

For drill line size (in): 1 1/2"Brake type (disk/drum): DrumMaximum line pull 12 lines (lt): 894,000Maximum line pull 10 lines (lt): 776,000Maximum line pull 8 lines (lt): 646,000Makeup cathead type: FOSTER ASSEMBLY 37Breakout cathead type: FOSTER ASSEMBLY 24Crown block safety device make/type: KOOMEY CROWNSAVERIndependent fresh water cooling system for drawworks and electric brake: yes/no YESAutomatic driller: yes/no NO Make/Type: N / A

B.2.2. Auxiliary BrakeMake: ElmacgoModel: 7040Independent back-up system type: yes Battery Backup

B.2.4 Slickline UnitMake/model: Mathey / SurveyorWire length (nominal) in ft: 20,000'Wire size (in): .092"Breaking strength (lt):Safe working load (lt):Depth counter: yes/no YESPull indicator (lbs): NO

B.3. DERRICK HOISTING EQUIPMENT

B.3.1. Crown BlockMake/Type: DrecoRated capacity (st): 1,000,000 lbs.No. of sheaves: 7Sheaves diameter (inches): 60"Sheave grooved for line size (inches): 1 1/2"

B.3.2 Travelling BlockMake/Type: OilwellRated capacity (st): 500 tons (1,000,000 lbs.)No. of sheaves: 6

Sheaves diameter (inches): 60"Sheave grooved for line size (inches): 1 1/2"

B.3.3. HookMake/Type: N / ARated capacity (lt):Complete with spring assembly/hook locking device: yes/no

B.3.4 SwivelMake/Type: Continental Emsco LB-500Rated capacity (lt): 500 tons (1,000,000 lbs.)Test/working pressure (psi/psi): 5000 PSIGooseneck and washpipe minimum ID (in): 3"Left hand pin connection type: 7 5/8" Reg. Pin x 6 5/8" Reg. Pin Access fitting for wireline entry on top 2 1/4" ID of gooseneck: yes/no YES

B.3.5 Drilling LineDiameter (inches): 1 1/2"Construction: 6x19 RIGHT REG. EIPSDrilling line reel: Drum cover: yes/no NO Drilling line drum power driven: yes/no YESSpare reel drilling line: yes/no Location (rig, shore, etc).Roller guides: yes/no YES

B.3.6. Anchor Dead LineMake/Type:Weight sensor: yes/no YESDeadline dampener: yes/no YES

B.3.8. Block Guidance SsytemMake/Type: Tesco / Monorail

B.4. ROTATING SYSTEM

B.4.1. Rotating Table:Make/Type: IDECOMaximum opening (inches): 37 1/2"Rated capacity (st): 700 tons (1,400,000 lbs,)Two speed gearbox: yes/no YESEmergency chain drive: yes/no NODriven by an independent electric motor: yes/no YES Electric motor type/make: D-79 EMD Output power (hp): 1000 h.p. Maximum continous torque (ft/lbs):Drip pan/mud collection system: yes/no YES

B.4.2. Master Bushings

Make/Type: VARCO MPCHInsert bowls (see G.1.8.) # 1, # 2 & # 3 BOWLs

B.4.4. Top DriveMake: TESCOType (electric/hydraulic): ElectricRated capacity: 650 TONTest/working pressure (psi/psi): 5000Output power (hp): 900 HPMaximum continuous torque (ft lbs): 39,081Two speed gearbox: NOMaximum rotary speed (rpm): 195Remote operated kelly cock: yes/no YESCooling system type: RADIATOR /HEAT PUMPUpper inside BOP (see also D.1.15): YES Quantity: 2 Make/type: HALKALIBRE DOUBLE BALL SPLINNED Working pressure (psi): 10,000 Max. OD body (in): 6 5/8" Max. ID body (in): 4 1/2" Connection type (box): 4 1/2" IF Connection type (pin): 4 1/2" IF

B.4.4.1 Top Drive Makeout/Breakout SystemMake: TESCOModel: ECI 500Max. makeup torque (ft/lbs): 46,525Max. breakup torque (ft/lbs): 57,282

B.4.4.1 Makeout/Breakout SystemMake:Model: IR-30120Max. makeup torque (ft/lbs): 120,000Max. breakup torque (ft/lbs): 120,000

C. POWER SUPPLY SYSTEM

C.1. RIG POWER PLANT

C.1.1 Diesel EnginesQuantity: 1Make/Type: EMD-GM 12-645-E8Maximum continuous power (hp): 1,650 BHP At rotation speed of (rpm): 900 RPMEquipped with spark arrestors: yes/no YESMufflers installed: yes/no YES

Quantity: 1Make/Type: EMD-GM 12-645-E8Maximum continuous power (hp): 1,650 BHP At rotation speed of (rpm): 900 RPMEquipped with spark arrestors: yes/no YESMufflers installed: yes/no YES

Quantity: 1Make/Type: EMD-GM 12-645-E8Maximum continuous power (hp): 1,650 BHP

At rotation speed of (rpm): 900 RPMEquipped with spark arrestors: yes/no YESMufflers installed: yes/no YES

C.1.2. DC - GeneratorQuantity: 0Make/Type: N / AContinuous power (kw): At rotation speed of (rpm):Output volts:

Quantity: 0Make/Type: N / AContinuous power (kw): At rotation speed of (rpm):Output volts:

C.1.3. AC - GeneratorQuantity: 3Make/Type: EMD AB-20-6Continuous power (kw): 2,625 KVA (2100KW) At rotation speed of (rpm): 900 RPMOutput volts: 600 V

C.1.4. SCR SystemNumber of SCR: 4 BaysMake/Type: International Switchboard CorporationMaximum continuous power total (kw):Output volts: 600 Volts

C.1.5. Transformer SystemQuantity: 2Make/Type: GENERAL ELECTRIC NEMA 3RContinuous power each (kva): 1000 KVA Output volts: 480Frequency Hz: 60

C.1.6 Emergency Shutdowns 1- DRILL FLOOREmergency shutdown switches for the complete 1- OIM OFFICEpower system (AC and DC), located at the 1- AT EACH LIFEBOAT STATIONfollowing points:

C.1.7. Compressed Air SystemsAir Compressors - Cold Start: YES Quantity: 1 1 Make: INGERSOL RAND INGERSOL RAND Model 7T R350 Rated capacity (cu ft/min): 109 250 Working press (psi): 125 PSI 125 PSI Prime mover (electric/diesel): DIESEL ELECTRIC Continuous power (hp):

Air Compressors - Medium Pressure (rig air): Quantity: 3 Make: INGERSOL RAND Model: SSR-2000 Rated capacity (cu ft/min): 350 SCFM Working press (psi): 120 Prime mover (electric/diesel): ELECTRICAL Continuous power (hp):

Air dryers Quantity: 1 Make/Type: AIRTEK DESICCANT TW 770 Rated capacity (cu ft/min): 800 SCFM

Air Compressors - Low Pressure (bulk air) N / A Quantity: Make: Model: Rated capacity (cu ft/hr): Working press (psi): Prime mover (electric/diesel): Continuous power (hp):

C.1.8 Air Receivers 2Volume - total (cu ft): 52.97Pressure (psi): 125psiLocation: Engine Room

Volume - total (cu ft): 25

Pressure (psi): 125 psiLocation: Drill Floor

C.2. EMERGENCY GENERATORC.2.1 Engine

Quantity: 1Make/Type: Detroit 8V-71Maximum output (kw): 225 At rotation speed (rpm): 1800Automatic starting: yes/no YESStarting methods (automatic, manual, air/hydraulic): Automatic/ElectricMax. angle of operation (degrees):

C.2.2. AC - GeneratorQuantity 1Make/Type: INTERNATIONAL ELECTRIC E-7370-M3Maximum output (kw): 225 At rotation speed (rpm): 1800Output volts: 480Capable of back-feeding power to main bus: yes/no YES

D. DRILLSTRING EQUIPMENT

D.1. TUBULARS

D.1.1. Drill PipeDrill pipe OD (inches): 5"Grade: G-105Total length (ft): 10,100 (ft)Range: 2Weight (lbs/ft): 19.5Internally plastic coated: YESTool joint OD/ID (inches): 6 5/8" OD - 3 1/4" IDTool join pin length (inches): 7" TSPACE / 4 1/2" pin lengthTapered shoulder tool joints - box/pins (degrees) 45 (degrees)

Connection type: NC 50 / 4 1/2 IFType of hardfacing: Grant Prideco 1000 SeriesAPI classification:Thread protectors: yes

Drill pipe OD (inches): 5"Grade: S-135Total length (ft): 8900 (ft)Range: 2Weight (lbs/ft): 19.5Internally plastic coated: YESTool joint OD/ID (inches): 6 5/8" OD - 3 1/4" IDTool join pin length (inches): 9 7/8" TSPACE / 4 1/2" pin lengthTapered shoulder tool joints - box/pins (degrees) 45 (degrees)

Connection type: NC 50 / 4 1/2 IFType of hardfacing: Grant Prideco 1000 SeriesAPI classification:Thread protectors: yes

D.1.2 Drill Pipe Pup JointsTool joint OD/ID (inches): 6 5/8" OD - 3 1/4" IDGrade: S-135Length (ft): 5 (ft) Quantity: 2Length (ft): 10 (ft) Quantity: 2Length (ft): 15 (ft) Quantity: 2Weight (lbs/ft): 19.5Connection type: NC 50 / 4 1/2 IFInternally plastic coated: YESAPI classification:Thread protectors: yes

D.1.3. Heavy Weight Drill PipeQuantity: 30Nominal size OD (inches): 5"Weight (lbs/ft): 50 (lbs/ft)Range: 2Tool joint OD/ID (inches): 6 9/16" - 6 5/8" OD / 3" IDType of hardfacing: Grant Prideco 1000 SeriesInternally plastic coated: yesConnection type: NC 50 / 4 1/2 IFThread protectors: yes

D.1.4. Drill collarsQuantity: 10OD Body (inches): 8" ODID Body (inches): 2 13/16" IDNominal length of each joint (ft): 30 (ft)Drill collar body (slick/spiral): (spiral)Recess for "zip" elevator: noRecess for slips: yesStress relief pin groove: YesBoreback on box: yesConnection type: 6 5/8 Reg

Quantity: 12OD Body (inches): 6 1/2" ODID Body (inches): 2 7/8" IDNominal length of each joint (ft): 30 (ft)Drill collar body (slick/spital): SpiralRecess for "zip" elevator: noRecess for slips: yes Stress relief pin groove: yesBoreback on box: yesConnection type: NC 50 / 4 1/2 IF

D.1.5 Inside BOP Valve (see also B.4.4)Quantity: 2Make: GreyOD (inches): 6 1/2" ODMin. ID (inches): 2 1/2" IDConnection type: NC 50 / 4 1/2 IFWorking pressure rating (psi): 10,000 (psi)Max. OD of dart. (inches): N/A

D.1.6 Bit Subs (Box-Box)Quantity: 2OD size (inches): 8" ODID size (inches): 2 7/8" IDTop connection: 6 5/8 RegBottom connection: 6 5/8 RegBored for float valve: yes Float size (inches): 5F-6R / 11 3/4"

Quantity: 2OD size (inches): 6 1/2" OD

ID size (inches): 2 1/2" IDTop connection: NC 50 / 4 1/2 IFBottom connection: NC 50 / 4 1/2 IFBored for float valve: yes Float size (inches): 4R / 8 5/16"

D.1.7 Crossover SubsQuantity: 2OD size -max/min (inches): 8" X 6 5/8" ODID size (inches): 2 7/8" IDTop connection size: 4 1/2 IF Type (pin/box): BOXBottom connection size: 6 5/8 Reg Type (pin/box): PIN

Quantity: 2OD size -max/min (inches): 6 3/4" X 4 7/8" ODID size (inches): 2 15/16Top connection size: 4 1/2 IF Type (pin/box): BOXBottom connection size: 3 1/2 IF Type (pin/box): PIN

Quantity: 2OD size -max/min (inches): 6 5/8" X 4 5/16ID size (inches): 2 9/16" IDTop connection size: 4 1/2 IF Type (pin/box): BOXBottom connection size: 3 1/2 PH-6 Type (pin/box): PIN

Quantity: 2OD size -max/min (inches): 6 9/16" ODID size (inches): 2 13/16" IDTop connection size: 4 1/2 IF Type (pin/box): PINBottom connection size: 4 1/2 IF Type (pin/box): PIN

Quantity:OD size -max/min (inches):ID size (inches):Top connection size: Type (pin/box):Bottom connection size: Type (pin/box):

D.2 HANDLING TOOLSD.2.1 Drill Pipe Elevators

Size (inches): 5"Quantity: 2Make: WT TYPE- GEModel: MGRated capacity (st): 350 (tons)

D.2.2 Drill Pipe Hand SlipsSize (inches): 5"Quantity: 1Make/Type: WOOLEY/VARCO

Size (inches): 5"Quantity: 1Make/Type: VARCO / SDXL

D.2.3 Drill Collar SlipsSize (inches): 6 1/2"Quantity: 2Make/Type: VARCO / DCS-L

Size (inches): 8"Quantity: 2Make/Type: VARCO / DCS-L

D.2.4 Drill Collar Safety ClampsQuantity: 1Range (inches-inches): 6 3/4" - 8 1/4"

Quantity: 1Range (inches-inches): 8" - 9 1/4"

D.2.5. Drill Collar Lifting SubsQuantity: 6For DC OD (inches): 8" ODConnection type: 6 5/8 Reg pin X 4 1/2 IF box

Quantity: 6For DC OD (inches): 6 1/2" ODConnection type: 4 1/2 IF pin X 4 1/2 IF box

D.2.6 DC Lifting PlugsQuantity:For DC OD (inches):Connection type:Quantity:For DC OD (inches):Connection type:

D.2.7. Bit BreakersQuantity: 1For bit size (inches): 6" - 6 1/4"

Quantity: 1For bit size (inches): 8 1/2"

Quantity: 1For bit size (inches): 9 1/2" - 9 7/8"

Quantity: 1For bit size (inches): 11 3/4" - 12 1/4"

Quantity: 1For bit size (inches): 12" - 12 3/4"

Quantity: 1For bit size (inches): 14 3/4"

Quantity: 1For bit size (inches): 17" - 17 1/2"

Quantity: 1For bit size (inches): 26"

D.2.8. Elevator LinksQuantity of sets: 1Make/Type: VARCO / Weldless linksSize (inches): 3 1/2"Length (ft): 9 (ft)Rated capacity (st): 350 (long tons)

Quantity of sets: 1Make/Type: VARCO / Weldless linksSize (inches): 3 1/2"Length (ft): 11 (ft)Rated capacity (st): 350 (long tons)

Quantity of sets:Make/Type: VARCO / Weldless linksSize (inches): 3 1/2"Length (ft): 18 (ft)Rated capacity (st): 350 (long tons)

Quantity of sets: 1Make/Type: VARCO / Weldless linksSize (inches): 4 1/2"Length (ft): 20 (ft)Rated capacity (st): 500 (long tons)

D.2.9 Drillpipe SpinnerMake/Type GRAYCHAINSize - max/min (inches): 3 1/2" to 5 1/2"

D.2.10 Mud Saver BucketMake: OTECOSize (inches): 3 1/2" - 5"

D.2.11 Rotary Rig TongsQuantity (sets): 2Make/Type: VARCO / HT-65Size range - max OD/min OD (inches/inches): 3 1/2" TO 17"Torque rating (ft lbs): 65,000

Quantity (sets): 1

Make/Type; BJ / EXT-BSize range - max OD/min OD (inches/inches): 13 3/8" - 25 1/2"Torque rating (ft lts): 25,000

5/9/2013 REV. 0

E. WELL CONTROLE.1. DIVERTER

Fixed: Make/type: Maximum bore (in): ID of insert packer (in): Working pressure (psi):Annular: Make/type: Shaffer Spherical Bolted Cover Maximum bore (in): 21 1/4 Working pressure (psi): 2000 PSIBottom connection: Size (in): API 21 1/4 2M Working pressure (psi): Gasket type: R73

Number of diverter outlets: 2Outlet OD (nominal) (inches): 12"

E.1.1 Diverter Flow LinesQuantity: 2Nominal size of flow lines (in): 12"Running from diverter to: ATMOSPHERE

Valve make/type: Series 900 RTJ Ball type Quantity: 2 Size (in): 12" Working pressure (psi): 3M Valve operator (air/dydraulic): HYD.Valve make/type: Quantity: Size (in): Working pressure (psi): Valve operator (air/dydraulic):System pressure rating (psi): 2mFlex hose in flow line: no

E.1.2 Diverter Control PanelPrimary make/type: Koomey type 80 Location: rig floorRemote make/type: Koomey type 80 Location: Rig FloorRemote make/type: Location:

E.2. LOW PRESSURE BLOWOUT PREVENTORS None

E.3 HIGH PRESSURE BLOWOUT PREVENTORSAll appropriate components H2S rated: Yes YES

E.3.1 Ram Type Preventers

5/9/2013 REV. 0

Quantity: 1Make/model: CameronType (single/double/triple): DoubleSize (inches): 13 5/8"Working pressure (psi): 10,000 psiRam locks: yes/no YESType (manual/hydraulic) ManuelH2S service: yes/no YESSide outlets: YES Size (inches): 4 1/16"

Working pressure (psi): 10,000 psiBottom connection: 13 5/8" 10m Bolted FlaTop connection: 13 5/8" 10m Bolted FlaShear ram boosters: yes/no YES

Quantity:Make/model: 1Type (single/double/triple): SingleSize (inches): 13 5/8"Working pressure (psi): 10,000 psiRam locks: YESType (manual/hydraulic): ManuelH2S service: yes/no YESSide outlets: YES Size (inches): 4 1/16" Working pressure (psi): 10,000 psiBottom connection: 13 5/8" 10m Bolted FlaTop connection: 13 5/8" Bolted FlangeShear ram boosters: yes/no No

E.3.2 Available Rams (installed & spare)Quantity/type/size no/type/in 1 set Blind ShearQuantity/type/size no/type/in 2 sets 5" pipeQuantity/type/size no/type/inQuantity/type/size no/type/in

E.3.3 BOP Ram Configuration (normal)Upper Blind Shear RamsUpper Middle: N / AMiddle: 5" Pipe ramsMiddle Lower: N / ALower: 5" Pipe Rams

E.3.4 Annular PreventerQuantity: 1Make/Type: ShafferSize (inches): 13 5/8"Working pressure (psi): 5,000 psiBottom connection: 13 5/8" 10M Bolted FlangeTop connection: 13 5/8" 5M Bolted Flange

E.3.5 Kill Line Valves

5/9/2013 REV. 0

Quantity: 1Make/Type: Cameron / FCSize (inches): 4 1/16"Working pressure (psi): 10,000 psiGasket type: BX-55Hydraulic/manual/non-return: Manuel

Quantity: 1Make/Type: Cameron / FCSize (inches): 4 1/16"Working pressure (psi): 10,000 psiGasket type: BX-55 Steel Ring GasketHydraulic/manual/non-return: Hydraulic

Quantity:Make/Type:Size (inches):Gasket type:Hydraulic/manual/non-return:

E.3.6 Choke Line ValvesQuantity: 1Make/type: Cameron / FCSize (inches): 4 1/16"Working pressure (psi): 10,000 psiGasket type: BX-55 Steel Ring GasketHydraulic/manual/non-return: Manuel

Quantity: 1Make/type: Cameron / FCSize (inches): 4 1/16"Working Pressure (psi): 10,000 psiGasket type: BX-55 Steel Ring GasketHydraulic/manual/non-return: Hydraulic

E.5 BOP CONTROL SYSTEME.5.1. Accumulator Unit

Make: KoomeyModel/Type: Type 80Location: Drill FloorFluid reservoir capacity (USG): 500 Gals.Oil/water mix rate (US gals/min): 100% Envio-rite B.O.P Glycol reservoir capacity (US Gal): N / ATotal accumulator capacity (w/o precharge) (USG): 280 GalsSystem working pressure (psi): 3000 psiControl manifold model: KoomeyRegulator type: Type 80 super sensitiv Total useful accumulator volume equals all preventer opening and closing volumes: yes/no YES Plus percent additional volume: 25%

E.5.2. Accumulator Hydraulic PumpsElectric driven

5/9/2013 REV. 0

Quantity: 1 Make: Koomey Model: triplex Each driven by motor of power (hp): 25 h.p. Flow rate of each pump (US Gal/min): 11.4 GPM At operating pressure (psi): 3000psi Operable off emergency generator: yes/no YES

Air driven Quantity: 3 Make: Koomey Model: Type 80 BIG SIXTY Flow rate of each pump (US Gal/min): 4 .5 GPM At operating pressure (psi): 3000PSI

E.5.3 Primary Control PanelControl panel make/model: KOOMEY TYPE 80Location: Drill FloorPanel controls for the following functions: All annular type BOP's: yes/no YES All ram type BOP's: yes/no YES Lock for ram type BOP's: yes/no NO Diverter System: yes/no YES Kill and choke line valves: yes/no YES Low accumulator pressure warning: yes/no NO Low reservoir level warning: yes/no NO Low rig air pressure warning: yes/no YES Pressure regulator for annular: yes/no YES Flowmeter: yes/no NO Quantity of pressure gauges: 6 Other control functions: yes/no NO

E.5.4. Remote Control Panels YESMake/Model: yes/no Koomey A6GRBQuantity: 2Locations: Drillers Shack/Drill FlooAbility to operate main closing unit: valves directly: yes/no YESSystem routing (direct or through panel): Through PanelRemote control of - system pressure regulator: yes/no NORemote control of - annular pressure regulator: yes/no NO

Make/Model: yes/no Koomey A6GQuantity: 2Locations: Starboard Lifeboat StaAbility to operate main closing unit: valves directly: yes/no YESSystem routing (direct or through panel): Through PanelRemote control of - system pressure regulator: yes/no NORemote control of - annular pressure regulator: yes/no NO

E.6 CHOKE MANIFOLD

5/9/2013 REV. 0

All appropriate components H2S rated: yes/no YES

E.6.1. Choke Manifold (see also H.3)Nominal size (inches): 4 1/16"Minimum ID (inches): 3 1/16"Maximum WP (psi): 10,000 psiQuantity of fixed chokes: 0 Make/model: Size ID (inches):Quantity of adjustable chokes: 2 Make/model: CAMERON H2 Size ID (inches): 2 9/16" Quantity of power chokes: 1 Make/model: Swaco Super Choke Size ID (inches): 2 9/16"Power choke remote control panel: yes/no YES Make: Swaco Model: Location: DRILLERS SHACKGlycol injunction: yes/no NO

E.7 FLEXIBLE CHOKE & KILL LINES(BOP to MANIFOLD)Quantity: 1Make/type: Armor Covered High P ID (inches): 3 1/2"Working pressure (psi): 10,000 psiH2S service: yes/no YES

Quantity: 1Make/type: Armor Covered High P ID (inches): 3 1/2"Working pressure (psi): 10,000 psiH2S service: yes/no YES

E.8 FLEXIBLE BOP CONTROL HOSESQuantity: 16Make/type: Armor Covered High P ID (inches): 1"Working pressure (psi): 3000 psiFire resistant: yes/no YES

E.9 BOP TESTING EQUIPMENTE.9.1 Hydraulic BOP Test Pump NO

Make:Model/Type:Pressure rating (psi):Chart recorder: yes/no NO

E.9.2 BOP Test StumpSize (inches): NO

5/9/2013 REV. 0

Size (inches):Size (inches):

E.10 BOP HANDLING E.10.1 BOP Hoist System

Make/type: INGERSOL RAND BHS75MB6-30 Quantity of hoists: 2Number of lift points on BOP: 4System safe working load (max BOP wt) (st): 37 1/2 TON

E.10.2 Work PlatformsBOP work platform (adjustable/fixed none): AdjustableConductor pipe platform: yes/no YES

E.10.3 Conductor Pipe Tensioning System: NOMake/type:Tension capacity (st):Number of lift points:Stroke (inches):

F. MUD SYSTEM/BULK SYSTEM

F.1 HIGH PRESSURE MUD SYSTEMSystem working pressure (psi): 5000 psiSystem test pressure (psi): 5000 psi

F.1.1 Mud PumpsQuantity: 1Make: IDECOModel: T-1600Type (triplex/duplex): TriplexMud pump drive motors/pump: Motor type: D-79 EMD Continuous power rating per motor (hp): 1000 hpFluid end: Maximum working pressure (psi): 5000 psi Test pressure (psi): 5000 psiPump stroke counter (type): ElectricSupercharging pump (type): Mission Magnum Driven by motor of power (hp): 75 hpDischarge/Suction line ID (inches): 6"DIS. x 8" SUCMud pump pulsation dampener (type): Hydril K-20Reset Relief Valve (type): Cameron TYPE BWorking flowrate per pump at 90% of max spm: Liner size (inches): 6 1/2" Pump speed (90% of max) (spm): 117 SPM Pump pressure (psi): 3981 Working flowrate (USG/min): 672

Quantity: 1Make: IDECOModel: T-1600Type (triplex/duplex): TriplexMud pump drive motors/pump: Motor type: D-79 EMD Continuous power rating per motor (hp): 1000 HPFluid end: Maximum working pressure (psi): 5000 PSI Test pressure (psi): 5000 PSIPump stroke counter (type): ElectricSupercharging pump (type): Mission Magnum Driven by motor of power (hp): 75 hpDischarge/Suction line ID (inches): 6"DIS. x 8" SUCTIONMud pump pulsation dampener (type): MattcoReset relief Valve (type): Cameron TYPE BWorking flowrate per pump at 90% of max spm: 1400 Liner size (inches): 6 1/2" Pump speed (90% of max) (spm): 117 Pump pressure (psi): 3981 Working flowrate (USG/min): 672

F.1.2 Transfer Pumps/Mixing Pumps

Mixing Pumps Quantity: 2 Make/model: Mission Magnum 8" x 6"x 13" IMP Output capacity (USG/min): 1600 GPM Drive motor type: 75 hp Electric Power output (kw):

F.1.3 Booster Pump N / AQuantity:Make/Type:Pumping capacity each (US Gals/min)Drive motor type: Power output (kw):

F.1.4 Standpipe Manifold Quantity of standpipes: 2Standpipes ID (inches): 3 1/2"H-Type Standpipe manifold: yes/no YESKill line outlet: yes/no YESFill-up/bleed-off line outlet: yes/no YES

F.1.5 Rotary HosesQuantity: 4Make/Type: GATES Flexible HoseID x length (inches x feet): 3 1/2" x 23'Working pressure (psi): 5000 psiSnubbing lines: yes/no YES

Quantity:Make/Type:ID x length (inches x feet): yes/noWorking pressure (psi):Snubbing lines:

F.1.6 Cementing HoseQuantity: 0Type (armor sheath/flexible steel pipe):Length (feet):ID (inches):Working pressure (psi):

Type (armor sheath/flexible steel pipe):Length (feet):ID (inches):Working pressure (psi):

F.1.7 High Pressure Flexible Steel PipeMake/type: Integral connections/fittings (non-threaded): yes/no YESID (inches): 2"Working pressure: 10,000 PSISection length (feet): 10'

Quantity:Section length (feet): Quantity:Sweep swivels, make/type: FMC Nom. Size ID: 2"Suitable for H2S service: yes/no YES

F.2. LOW PRESSURE MUD SYSTEMF.2.1 Mud Processing Tank

Sand trap tank, usable volume (bbl):Degasser tank, usable volume (bbl): 38.76 Agitated: yes/no NODesander tank, usable volume (bbl): 55.8 Agitated: yes/no NODesilter tank, usable volume (bbl): SAME TANK AS DES Agitated: yes/no NOMud cleaner tank, usable volume (bbl): 38.76 Agitated: yes/no NOCentrifuge tank, usable volume (bbl): Agitated: yes/no NOOther tank, usable volume (bbl): NO Agitated: yes/noTotal usable capacity: 131 bbls.

F.2.2 Mud Tanks

Quantity: 5Total capacity - usable (bbls): 1208.57Usable capacity No. 1 (bbl): 454.55 Type (active/reserve): RESERVEHeight (feet): 7.5Mixer: yes/no YESMud guns: yes/no YESUsable capacity No. 2 (bbl): 299.47 Type (active/reserve): ACTIVEHeight (feet): 7.5Mixer: yes/no YESMud guns: yes/no YESUsable capacity No. 3 (bbl): 454.55 Type (active/reserve): RESERVEHeight (feet): 7.5Mixer: yes/no YESMud guns: yes/no YES

F.2.3 Pill/Slug TankUsable capacity (bbls): 68.25 SLUGGINGMud agitator: yes/no YESMud guns: yes/no YES

Usable capacity (bbls): 80.25 PILLMud agitator: yes/no YESMud guns: yes/no YES

F.2.4 Trip/Stripping Tank

Usable capacity (bbls): 25Capacity/foot (bbl/ft): 5.39Level indicator: yes/no YES

Electric pump make: Model/type: HALCO 4"x3"x 11" IMPELLAR

Related capacity (hp): 20 HPFacility for casing fill-up: yes/no YESAlarm and strip chart recorder: yes/no YES

F.2.5 Chemical Mixing TankUsable capacity (bbls):Chemical mixer type:

F.2.6 Shale ShakersPrimary: Quantity: 1 Make/model: DERRICK FLOW LINE SCALPER Type: GUMBO BUSTER Total nominal flow rate (bbl/min):

Cascading: Quantity: 3 Make/model: BRANDT Type: King Cobra Total nominal flow rate (bbl/min):

F.2.7 DesanderQuantity: 1Make/Model: BRANDTType: SR-2Nominal flow rate (bbl/min): 23.80 BBLS/MINNumber of cones x size: 2-12"Feed pump make/model: HALCO Type/size (inches) 8x6x14 Capacity (gpm): 2400 Drive motor hp: 100Is pump dedicated to desander: yes/no NO

F.2.8 DesilterQuantity: 1Make/Model: BRANDTType: SE-16Nominal flow rate (bbl/min): 24.76Number of cones x size: 16-4"Feed pump make/model: HALCO Type/size (inches): 8x6x14 Capacity (gpm): 2400 Drive motor hp: 100Is pump dedicated to desilter: yes/no NO

F.2.9 Mud Cleaner ShakerQuantity: 1Make/Model: BRANDT

Type: King CobraNominal flow rate (bbl/min):Number of cones x size:Feed pump make/model: Type/size (inches): Capacity (gpm): Drive motor hp:Is pump dedicated to cleaner: NO

F.2.10 Mud/Gas Separator (Poor Boy)Make/Type: SWACO VESSEL TYPEDimensions (height x OD) (ft. x in): 21FT x 30"Gas discharge line ID (inches): 8"Gas discharge location, primary: 6" ABOVE DERRICK A-FRAMECan discharge be tied into burner system: NOVacuum breaker: NOMud seal height (feet): 6FT.Pressure gauge: YESCalculated gas throughput (mmscf): MDWP125 PSI @650deg F.

F.2.11 DegasserMake/Type SWACONominal flow rate (bbl/min) 21.42Feed pump make/model: HALCO Type/size: 8x6x14 Capacity (gpm): 2400 Drive motor hp: 100Is pump dedicated to degasser: yes/no NOVacuum pump make type: INGERSOL RAND TYPE 30

F.2.12 Mud AgitatorsQuantity: 5Make/Model: DUCK INDUSTRIESDriven by electric motor of (kw): 15 HPLocated in tanks (See F.2.1 and F.2.2 for tank numbers): 2-#1,2-#3,1-#2 MUD P

Quantity: 2Make/Model: DUCK INDUSTRIESDriven by electric motor of (kw): 5HPLocated in tanks (See F.2.1 and F 2.2 for tank numbers): 1-SULG, 1-PILL

F.2.13 Mud Centrifuge NONEQuantity:Make/Model:Feed pump make/model: Type/size: Capacity (bbls/min): Drive motor hp:Is feed pump dedicated to centrifuge(s) yes/no

Quantity:

Make/Model:Feed pump make/model: Type:size Capacity (bbls/min): Drive motor hp:Is feed pump dedicated to centrifuge(s) yes/no

F.2.14 Mud Laboratory and FacilitiesSeparate room: yes/no NOEquipped with: Mud balance: yes/no Marsh funnel: yes/no Filtration kit: yes/no Sand content kit: yes/noAir conditioning: yesno NOPositive pressure: yes/no YES

F.3 BULK SYSTEMF.3.1 Barite/Bentonite Silos

Quantity: 3Capacity of each silo (cu ft): 1200Locations: MAIN DECK PORT BOWType weight loadcell: Manufacturer: NONEPressure rating (psi): 40 PSIRelief valve(s) installed: yes/no YES

F.3.2 Cement SilosQuantity: 3Capacity of each silo (cu ft): 1200Locations: MAIN DECK STBD BOWType weight loadcell: Manufacturer: NONEPressure rating (psi): 40 PSIRelief valve(s) installed: yes/no YESSeparate mud/cement loading facilities: yes/no YESDischarge line for cement independent frombarite/bentonite discharge line: yes/no YES

F.3.3 Surge Tank for Barite/BentoniteQuantity: 1Capacity of each tank (cu ft): 70Type weight loadcell: Manufacturer: WAGNERPressure rating (psi): 12PSIRelief valve(s) installed: yes/no NO

F.3.4 Mud HopperQuantity: 2Make/model: JETFeed pump make/model: HALCO/MISSION

Type/size: 8x6x13" IMPELLAR Capaicity (bbl/min): 57.14 Drive motor hp: 75Is feed pump dedicated to mud hopper(s): yes/no YES

F.3.5 Surge Tank for CementQuantity: 1-CEMENT COMPANY SUPPLIEDCapacity of each tank (cu ft): 70Type weight loadcell: M/D TOTCO Manufacturer:Pressure Rating (psi): 12Relief valve(s) installed: yes/no YES

F.3.5 Bulk Transfer System(See also C.1.7 - Compressed Air Systems) NOIndependent air system for the silos and surge tanks consisting of a high-volume low-pressure compressor and air drier: NO

Air reduced from main air supply through pressure regulators: YES

Separate volume tank and drier: NO

G. CASING/CEMENTING EQUIPMENT

G.1. CASING EQUIPMENTG.1.1 Drive Hammer NO

Make/type:Maximum casing/conductor OD (in):

G.1.2 API Casing Drifts NOFor casing OD, weight,quantity: / / /For casing OD, weight,quantity: / / /For casing OD, weight,quantity: / / /For casing OD, weight,quantity: / / /For casing OD, weight,quantity: / / /For casing OD, weight,quantity: / / /

G.1.3 Clamp-on Type Casing Thread Protectors NOFor casing OD, quantity: /For casing OD, quantity: /For casing OD, quantity: /For casing OD, quantity: /For casing OD, quantity: /For casing OD, quantity: /

G.1.4 Side Door Casing Elevator NOQuantity:For OD casing (in):Make/Type:Capacity:

Quantity:For OD casing (in):Make/Type:Capacity:

Quantity:For OD casing (in):Make/Type:Capacity:

Quantity:For OD casing (in):Make/Type:Capacity:

Quantity:For OD casing (in):Make/Type:Capacity:

Quantity:For OD casing (in):Make/Type:

Capacity:

G.1.5 Single Joint Casing Elevator NOQuantity:For OD casing (in):Make/Type:

Quantity:For OD casing (in):Make/Type:

Quantity:For OD casing (in):Make/Type:

Quantity:For OD casing (in):Make/Type:

Quantity:For OD casing (in):Make/Type:

Quantity:For OD casing (in):Make/Type:

G.1.6 Slip Type Elevator/Spiders NOQuantity:Make/Type:Pneumatic/manual:Capacity (st):W/slips for OD casing sizes (in):

Quantity:Make/Type:Pneumatic/manual:Slips for OD casing sizes (in):

Quantity:Make/Type:Pneumatic/manual:Slips for OD casing sizes (in):

G.1.7 Casing Slips NOQuantity:Make/Type:For OD casing (in):

Quantity:Make/Type:For OD casing (in):

Quantity:Make/Type:For OD casing (in):

Quantity:Make/Type:For OD casing (in):

Quantity:Make/Type:For OD casing (in):

Quantity:Make/Type:For OD casing (in):

G.1.8 Casing Bowls YESQuantity: 1 SetMake/Type: #1 BowlFor OD casing (max/min): 15 1/4" Max. ID

Quantity: 1 SetMake/Type: #2 BowlFor OD casing (max/min): 12 1/4" Max. ID

Quantity: 1 SetMake/Type: #3 BowlFor OD casing (max/min): 10 1/4" Max. ID

G.1.9 Manual Casing Tongs YESQuantity (sets): 1Make/Type: BJ EXT-BW/jaws for OD casing (max/min): in/in 13 5/8" / 25 1/2"

Quantity (sets):Make/Type:W/jaws for OD casing (max/min): in/in

Quantity (sets):Make/Type:W/jaws for OD casing (max/min): in/in

G.1.10 Power Casing Tongs NOQuantity:Make/Type:W/jaws for OD casing (max/min): in/inMax output torque (ft lbs):Torque indicator:Back-up arm:

Quantity:

Make/Type:W/jaws for OD casing (max/min): in/inMax output torque (ft-lbs):Torque indicator:Back-up arm:

G.1.11 Power Unit for Casing & Tubing Tongs NOQuantity:Make/Type: Capacity - each (gpm):Output pressure (psi):Dedicated unit:

G.1.11 Casing Circulating Head (swedge) NOFor OD casing (psi):Connection type (top/bottom):

For OD casing (psi):Connection type (top/bottom):

For OD casing (psi):Connection type (top/bottom):

For OD casing (psi):Connection type (top/bottom):

For OD casing (psi):Connection type (top/bottom):

For OD casing (psi):Connection type (top/bottom):

G.1.13 Casing Spears (internal) NOQuantity:Make/Type:For OD casing (in):For casing weigh (lbs/ft):Pack-off:

Quantity:Make/Type:For OD casing (in):For casing weight (lbs/ft):Pack-off:

Quantity:Make/Type:For OD casing (in):For casing weight (lbs/ft):Pack-off:

G.1.14 Casing Cutters (internal) NO

Quantity:Make/Type:For OD casing (max/min): in/in

Quantity:Make/Type:For OD casing (max/min): in/in

Quantity:Make/Type:For OD casing (max/min): in/in

G.1.15 Crossover to Handle Casing with DP NOQuantity:For OD casing (in):Casing connection:Drill pipe connection type:Rated capacity (st):

Quantity:For OD casing (in):Casing connection:Drill pipe connection type:Rated capacity (st):

Quantity:For OD casing (in):Casing connection:Drill pipe connection type:Rated capacity (st):

G.1.16 Casing Scrapers NOQuantity:Make:For OD casing (in):For casing weight (lbs/ft):OD body (in):Connection type:Blade type (roller/fixed):

Quantity:Make:For OD casing (in):For casing weight (lbs/ft):OD body (in):Connection type:Blade type (roller/fixed):

Quantity:Make:For OD casing (in):For casing weight (lbs/ft):

OD body (in):Connection type:Blade type (roller/fixed):

Quantity:Make:For OD casing (in):For casing weight (lbs/ft):OD body (in):Connection type:Blade type (roller/fixed):

G.2. CEMENTING EQUIPMENTG.2.1 Cement Unit

Owner: B.J.Free Placement basis: yes/noMake/Type: RAM 348No. of triplex pumps: 2Maximum working pressure (psi): 15,000 psiMaximum flowrate (total): bbl/min 14 bpmUnit powered by (electric/diesel): DieselRecirculating mixing system: yes/no YES Capacity (bbls): 22 bbls Motor power (hp): 450 hpLiquid additive system: yes/no YESPremix/batch tank (USG/min): Quantity: Capacity (total bbls): 22 bblsPressure recorder: yes/no YESDensionmeter recording device: yes/no YES

G.2.2 Cementing ManifoldDischarge manifold working pressure (psi): 15,000 PSICement pump discharge lines min ID (in): 1.75"Cement anManifold safet5y pressure relieve valve: yes/no YES

G.2.3 Cementing Standpipe YesQuantity: 1Working pressure (psi): 5,000 psiID (in): 2"Connection to choke manifold: NoConnection to standpipe manifold: No

G.2.4 Cement Kelly NOQuantity:Nominal size OD (in):Total length (ft):Working length (ft):Connection type:Cement head:

Quantity:Nominal size OD (in):Total length (ft):orking length (ft):Connection type:Cement head:

G.2.5 Cementing Tubing NOSize (in): 2"Total length (ft): 55' / B.J.X-overs to drillpipe specified in Section D.1.3: yes/no

H. INSTRUMENTATION/COMMUNICATION

H.1 DRILLING INSTRUMENTATION AT DRILLER'S POSITION

H.1.1 Weight IndicatorMake/Type Martin Decker / Type ESensor type: Tension Sensator Load Cell

H.1.2 Standpipe Pressure GaugesQuantity: 1Make/Type: M/D TotcoMaximum pressure reading (psi): 5000 psi

H.1.3 Choke Manifold Presure GaugeQuantity: 1Make/Type: Cameron Iron Works / Type FMaximum pressure reading (psi): 10,000 psi

H.1.4 Rotary InstrumentationH.1.4.1 Tachometer Make/Type: Maximum RPM:

H.1.4.2 Torque Indicator Make/Type: Maximum torque (ft-lbs):

H.1.5 Top Drive InstrumentationH.1.5.1 Tachometer Make/Type: Tesco / Digital

Maximum RPM: 195 rpm

H.1.5.2 Torque IndicatorMake/Type: Tesco / DigitalMaximum torque (ft-lbs): 39081 ft/lbs

H.1.6 Pump Stroke CountersQuantity: 6Make/Type: ElectricOne pump stroke indicator and one cumulative pump stroke counter for each pump: yes

H.1.7 Tong Torque Indicator:Make/Type: AOIMaximum torque (ft-lbs): 25,000 ft/lbs

H.1.8 Pit Volume TotalizerMake/Model: OFI / EMS IIIFloats in active mud tanks: yes Quantity per tank: 1Floats in reserve mud tanks: yes Quantity per tank: 1

Floats in mud processing tanks: yes Quantity per tank: 1Loss/Gain indicator: yesAlarm (audio and visual): yes

H.1.9 Mud Flow IndicatorMake/Model: OFI / EMS IIIHigh/low alarm (audio and visual): yesSensor location: Flow line under rig floor

H.1.10 Trip Tank IndicatorMake/Model: OFI / EMS IIIChart recorder: noAlarm: no

H.1.11 Automatic Driller (see B.2.1)

H.1.12 Remote Choke Control Unit (see E.5)

H.1.13 Crown Clearance IndicatorMake/Type: Crown-o-matic

H.2. DRILLING PARAMETER RECORDERQuantity:Make/Type: OFI / EMS IIILocation -1: Drill Floor Type (display/recorder/both): bothLocation -2: OIM's Office Type (display/recorder/both): bothLocation -3: Co. Rep. Office Type (display/recorder/both): bothNumber of parameters recorded: 15Parameter recorded: ROP Flow RateParameter recorded: Gas SPMParameter recorded: Hook Load GPMParameter recorded: Weight on bit Gain/LossParameter recorded: RPM ROP / 5'Parameter recorded: Tourque APV Parameter recorded: Pump Pressure Trip Tank VParameter recorded: PVT

H.3. INSTRUMENTATION AT CHOKE MANIFOLD

H.3.1 Standpipe Pressure Gauge(Drillpipe pressure gauge)Quantity: 1Make/Type: Martin Decker Pressure range (maximum psi): 10,000 psi

Visible from choke operating position: yes

H.3.2 Choke Manifold Pressure Gauge

(Casing pressure gauge)Quantity: 1Make/type: Martin DeckerPressure range (maximum psi): 10,000 psi

Visible from choke operating position: yes

H.4. INSTRUMENTATION AT STANDPIPEH.4.1 Standpipe Pressure Gauge Quantity: 1 Make/type: Totco / Type 4 Pressure range (psi/psi): 5000 psi

Visible from driller's position: yes Visible from choke oeprating system: yes

H.5. DEVIATION EQUIPMENT

H.5.1 Deviation RecorderQuantity: 1Make/Type: TotcoDeviation range (degree): 8 deg

Quantity: 1Make/Type: TotcoDeviation range (degree): 16 deg

H.5.2 Slickline Unite (see B.2.4)

H6. RIG COMMUNICATION SYSTEM

H.6.1 Telephone SystemNo. of stations: 3Make/Type: PetrocomExplosion proof: no

No. of stations:Make/Type:Explosion proof: yes/no

No. of stations:Make/Type:Explosion proof: yes/no

H.6.2 Public address systemCan be combined with above: yesN o. of stations: 36Make/Type: GaitronicsExplosion proof: yes

H.6.3 Drill Floor - Derrickman's Talkback(for intercom system)

No. of stations: 2 Location: Driller's Shack Location: Monkey Board Location:Make/Type: GaitronicsExplosion proof: yes

H.6.4 Hand-Held VHF RadiosQuantity: 8Quantity intrinsically safe: 8

H.6.5 Crane Communication SystemQuantity: 2Make/type: GaitronicsExplosion proof: noPart of rig telephone system (H.6.1): yes Part of public address system (H.6.2): yes

H.7. ENVIRONMENTAL INSTRUMENTATION

H.7.1 Temperature IndicatorsAir temperature: yes Make/Model: Maximum/ MysticSea water temperature: no Make/Model:Recorder: no

H.7.2 Barometric Pressure IndicatorMake/Model: Maximum/ MysticRecorder: no

H.7.3 Humidity Sensing IndicatorMake/Model: noneRecorder: no

H.7.4 Wind Speed/Direction Meter yesMake/Model: Maximum/ MerlinRecorder: no

H.7.5 Wave Profit Recorder noMake/Model:Recorder:

H.7.6 Current Indicator noMake/model:Located at:Recorder:

H.7.7 Weather FacsimileMake/model: Navtex / 222Located at: Control RoomRecorder: yes

H.8 NAVIGATION INSTRUMENTATIONH.8.1 Gyro Compass no

Make/Model:Located at:

H.8.2 Depth Sounder noMake/Model:Located at:Recorder:

H.8.3 Radar noQuantity:Make/Model:Located at:Bandwidth (cm):

H.9 EXTERNAL COMMUNICATIONS EQUIPMENT

H.9.1 SSB TransceiverLocation(s): Control RoomQuantity: 1Make/Model: Sailor GMDSS System 4000Power (watts): 250Frequency range (mhz-mhz): 1.6 & 30 MHz (Synthesized/crystal)Facsimile capable: yesTelex capable: yes

H.9.2 E.P.I.R.B.'sQuantity: 1Make/Model: ACR Electronics / Class 1Location(s): Above Control Room

H.9.3 Marine VHF RadioQuantity: 4Make/Model: Furuno / FM-2610Power (watts): 25 wattsChannels: 88Location(s): OIM's Office, Galley, Port Crane,S

Quantity: 2Make/Model: Sailor VHF/DSC RT4822Power (watts): 25Channels: 88Location(s): control room

H.9.4 Aircraft Radio Beacon TransmitterQuantity: 1Make/Model: SD 100 (watts): 10 to 100 WATTS

190 TO 1800 KHz

H.9.5 Aeronautical VHF TransceiverQuantity: 2 (1 Handheld 1 Stationary)Make/Model: Icom IC-A110 EURO & IC-A6EPower (watts): 5/25Frequency range (hz-hz) 118.075 To 134.125 (Synthesized/crystal):Location(s): CONTROL ROOM

H.9.6 Watch ReceiverQuantity: 2Make/Model: Sailor VHF/DSC RT4822Frequency (khz): 156.525

H.9.7 Satellite Communication System PetrocomMake/Model: Comtech / CDM-550Type:Facsimile capable (see also H.9.9): yes Telex capable (see also H.9.10): yes Location(s): OIM's Office, Barge Super. Office,

H.9.8 CellularNumber of phone lines: 1

H.9.9 FacsimileMake/model: HP / 710Connected to: Sat. Com. System

Make/model:Connected to:

H.9.10 Telex noQuantity:Make/model:Connected to:

Quantity:Make/model:Connected to:

H.9.11 Scrambler noMake/Model:Connected to:

Make/Model:Connected to:

H.9.12 Other Communication Systems noMake/Model:Connected to:

Make/Model:Connected to:

I. PRODUCTION TEST EQUIPMENT

I.1 BURNERSMake/Type:Quantity:Capacity (bbls/day):Weight (st):Water requirement at 100 psi (bbls/min):

I.2. BURNER BOOMSMake/Type:Quantity:Length (ft):Horizontal: yes/noMaximum wind speed (knots):Walkway and handrails: yes/noBurner platform size (ftxft):Burner mounting rotatable: yes/no

I.3 PIPING ON BURNER BOOMS

I.3.1 Oil LineID (in):Working pressure (psi):Connection type at burner end (type):H2S: yes/noPressure gauge connection at barge end (in):

I.3.2 Gas LineID (in):Working pressure (psi):Extended beyond burner by (ft):Connection type at burner end:H2S: yes/noPressure gauge connection at barge end (in):

I.3.3 Water LineID (in):Working pressure (psi):Connection type at burner end:Pressure gauge connection at barge end (in):

I.3.4 Air LineID (in):Working pressure (psi):Connection type at burner end:Pressure gauge connection at barge end (in):

I.3.5 Pilot GaslineID (in):Working pressure (psi):Connection type at burner end:Pressure gauge connection at barge end (in):

I.4 SPRINKLER SYSTEMSystem in place: yes/no

Pump source:Sufficient to give protection to rig and personnel againstheat radiation damage from the burners: yes/no

I.5 FIXED LINES FOR WELL TESTINGI.5.1 Drillfloor to Separator Area

Typed (screwed/welded, both):Quantity:Size ID (in):Working pressure (psi):Connection type on drill floor:Connection type at separator:Number of valves/lines: Size of valves (in):H2S: yes/no

I.5.2 Separator Area to Each Burner BoomService (oil/gas):Type (screwed/welded, both):Quantity:Size ID (in):Working pressure (psi):Connection type on separator:Connection type at boom:Number of valves/lines: Size of valves:H2S: yes/noValves installed near separator area for switching gas ato either burner: yes/no

Service (oil/gas):Type (screwed/welded, both):Quantity:Size ID (in):Working pressure (psi):Connection type on separator:Connection type at boom:Number of valves/lines: Size of valves:H2S: yes/noValves installed near separator area for switching gas to either burner: yes/no

I.5.3 Water Lines to Burner BoomsType (screwed/welded, both):Quantity:Size ID (in):Working pressure (psi):Number of valves required: Size of valves:Pump source:Connected to fire fighting pumps: yes/noRated line capacity at 300 psi (bbls/hr):

I.5.4 Rig Air System to BurnersType (screwed/welded, both):

Quantity:Size ID (in):Working pressure (psi):Non-return valves fitted: yes/noAir source:

I.5.5 Oil Storage Tank to OffloadType (screwed/welded, both):Quantity:Size ID (in):Working pressure (psi):Connection type at separator area:

I.5.6 Separator to Ventstack of RigType (screwed/welded, both):Quantity:Size ID (in):Working pressure (psi):Connection type at separator area:

I.6. AUXILIARY POWER AVAILABILITyI.6.1 For Field Laboratory

Quantity:Volts:Frequency (Hz):Breaker (amp):

I.6.2 For Crude Transfer PumpQuantity:Volts:Frequency (Hz):Breaker (amp):

I.6.3 For Electric HeatersQuantity:Volts:Frequency (Hz):Breaker (amp):

J. WORKOVER TOOLS

K. ACCOMMODATION

K.1. OFFICESK.1.1 Company Representative's Office

Quantity: 3Number of comibination office/staterooms in 1 above:Complete with desk, filing cabinet(s) and other necessary furniture: YESQuantity with unrestricted view to drill floor: 1

K.1.2 Contractor's Representative's OfficeQuantity: 1Quantity with unrestricted view to drill floor: 1

K.1.3 Control RoomQuantity: 1

K.1.4 Radio Room SAME AS CONTROL ROOMQuantity: 1

K.1.5 Helicopter Ready Room YES TV ROOMuantity:

K.1.6 Hospital RoomNumber of beds/bunks: 2Medical cabinet: YESDangerous drugs: NO

K.2. LIVING QUARTERSK.2.1 Accomodations

Total beds: 88Number of bed/room type (1, 2, 3, etc): 2 MAN ROOMSNumber of rooms: 6Toilets (private/shared/communal): 2 PRIVATE ,2 SHAREDShowers (private/shared/communal): 2 PRIVATE ,2 SHARED

No. of beds/room type (1,2, 3, etc): 4MANR ROOMSNumber of rooms: 9Toilets (private/shared/communal): 10 COMMUNALShowers (private/shared/communal): 10 COMMUNAL

No. of beds/room type (1,2,3, etc): 6 MAN ROOMSNumber of rooms: 2Toilets (private/shared/communal): 10 COMMUNALShowers (private/shared/communal): 10 COMMUNAL

K.2.2 GalleyQuantity: 1

K.2.3 Mess Seating CapacityMain Mess: 24Aux. Mess:

K.2.4 Meetings RoomsQuantity: 1 TV ROOM

K.2.5 Recreation RoomsQuantity: 1Recreation facilities: TV: YES VCR: YES Pool Table: NO Ping Pong Table: NO

Computer: NO Workout/Weight Room: NO Other:

K.2.6 Other RoomsChange rooms: 2Prayer room:Cinema:Other:

L. SAFETY EQUIPMENT

L.1. GENERAL SAFETY EQUIPMENT

L.1.1 General Personel Protective GearSafety glasses (contractor only/everone/not supplied): CONTRACTORSafety hats (contractor only/everyone/not supplied) CONTRACTORSafety boots (contractor only/eveyone/not supplied) CONTRACTORSafety clothing (contractor only/eveyone/not supplied) CONTRACTOREar protection (contractor only/everyone/not supplied) EVERYONERubber gloves (contractor only/everyone/not supplied) CONTRACTORRubber aprons (contractor only/everyone/not supplied) CONTRACTORRubber gloves - elbow length for chemical handling CONTRACTOR (contractor only/everyone/not supplied) CONTRACTORFullface visors - (contractor only/everyone/not suppld): CONTRACTOREye shields - (contractor only/everyone/not supplied): CONTRACTORDust masks - (contractor only/everyone/not supplied): CONTRACTORExplosion proof handtorches c/w batters: CONTRACTOR (contractor only/everyone/not supplied)Safety belts c/w lines EVERYONE (contractor only/everyone/not supplied)

L.1.2 Decontamination StationsL.1.2.1 Eye Wash Stations Quantity (fixed): 5 Make/model: HAWS 8309 Location(s): Shakers, Cement Unit

Mud Pits, Sackroom, Drill Floor Quantity (portable): 4

Make/model: NORTHLocation(s): EACH LEVEL OF QUARTERS

MUD PUMP ROOML.1.2.2 Safety Showers

Quantity (fixed): 5Location(s) Mud Pits, Sackroom, Drill Floor

Shakers, Cement UnitL.1.3 Derrick Safety Equipment

Derrick escape chute (rem chute): Make/Type:Derrick safety belts: Make/Type: DBI/SALA L908Derrick safety belts: Make/Type:

L.1.4 Derrick Climbing AssistantMake/Type: DBI/SALA LAD-SAF

WITH 3330 SAFETY SLEEVEL.1.5 Fresh Air Blowers (bug blowers)

Quantity: 1Make/Type: BRANDT 48" Located at: ABOVE RIG FLOORLocated at:

L.2. GAS/FIRE/SMOKE DETECTION

L.2.1 H2S Monitoring SystemMake/Type: DETCONSampling points at Bellnipple: YES Drillfloor: NO Shale shaker: YES Mud tanks: YES Ventilation system into living quarters: NO Other:General alarm: YESAlarm types (audible, visual, both) at Driller's console (audible, visual, both): BOTH Engine room (audible, visual, both): BOTH Mud room (audible, visual, both): BOTH Living quarters each level (audible, visual, both): AUDIBLE Central area each structural level: BOTH (audible, visual, both): Other:Tied to general alarm: YESCentral alarm panel: yes/no Located at:Local alarm (audible, visual, both):

L.2.2 Combustible Gas Monitoring SystemMake/Type: GASTECH SAFE-T-NET 2000Sampling points at Bellnipple: YES Drillfloor: YES Shale shaker: YES Mud tanks: YES Ventilation system into living quarters: YES Other:General alarm: NOAlarm types (audible, visual, both) at Driller's console (audible, visual, both): Engine room (audible, visual, both): Mud room (audible, visual, both): Living quarters each level (audible, visual, both): Central area each structural level (audible, visual, both): Other:Tied to general alarm: NOCentral control panel: YES Located at:

L.2.3 H2S Detectors (portable)Quantity: 3Make/Type: GAS ALERT Micro 5Stain tubes for H2S: measuring range: DIGITAL

From 1 to 20 percent: From 100 to 600 percent:

L.2.4 ExplosimetersQuantity: 3Make/type: GAS ALERT Micro 5

L.2.5 CO2 Gas Detectors (portable)Quantity: 3Make/Type: GAS ALERT Micro 5Stain tubes for C02: measuring range: DIGITAL From 1 to 20 percent: From 5 to 60 percent:

L.2.6 02 Meter (portable)Quantity: 3Make/Type: GAS ALERT Micro 5

L.2.7 Fire/Smoke Detectors in AccommodationMake/Type: IN EACH STATE ROOMFire detection: NOSmoke detection: YESCentral alarm panel: NO Location:Alarms:Pull boxes:

L.3. FIRE FIGHTING EQUIPMENT

L.3.1 Fire PumpsQuantity: 2Make/Model: HALCO 4x3x13Type: CENTRIFUGALOutput (each) (USG/min): 750 GPMLocation(s): 1-Daytank Room, 1 SCR Hall

All offtake points supplied by all pumps: YES Remote start from Heliport

L.3.2 Hydrants and HosesHydrants positioned such that any point may bereached by a single hose length from two separatehydrants: YESQuantity of hydrants: 28Hose connections/hydrant: 17- 1 1/2" 9- 2 1/2" Hose max. diameter (in): 17- 1 1/2" 9- 2 1/2" Length (ft): 50 FT

L.3.3 Portable Fire ExtinguishersQuantity (total)Type 1-CO2 (no/lbs): 2- 5LB

(no/lbs): 2- 15LB (no/lbs): 7- 20LB

(no/lbs): 1- 150LBType 2 - Dry Chemical (no/lbs):

(no/lbs): 3- 2.5LB (no/lbs): 13- 5LB (no/lbs): 9- 10 LB (no/lbs): 9- 20LB (no/lbs): 2-150LB

Type 3 - Foam (no/lbs): (no/lbs): 3- 250 LB PORTABLE (no/lbs): (no/lbs):

Water (no/lbs): (no/lbs): (no/lbs): (no/lbs):

Halon (no/lbs): (no/lbs): (no/lbs): (no/lbs):

Mounted adjacent to access ways and escape YES routes:

L.3.4 Fire Blankets:Location: GALLEYQuantity: 1

L.3.5 Fixed Foam SystemMake/Type:Quantity foam concentrate stored (USG):Foam type: Application rate (USG/min):Foam nozzles: Located at: Located at: Located at:Automatically injected into fixed fire water system:

L.3.6 Helideck Foam SystemMake/Type: Mecanica ReunidaQuantity of monitors: 3Quantity of foam concentrated stored (USG): 140 Gals.Foam type: LIOVAC-AFFF-33Application rate (USG/min):

L.3.7 Fixed Fire Extinguishing SystemProtected spaces Engine room, type (Halon/CO2): CO2Remote manual release located at: SCR Hall Paint locker, type (Halon/CO2): CO2Remote manual release located at: PAINT LOCKER

Emergency generator, type (Halon/CO2): NORemote manual release located at: SCR room, type (Halon/CO2): NORemote manual release located at: Other - specify location/type: GALLEY CO2Remote manual release located at: IN GALLEYAlarms (audible, visual or both): BOTHAutomatic shutting of mechanical ventilation

in protected spaces: NO

L.3.8 Manual Water Deluge System NOProtected spaces:Protected spaces:Water supplies from fire main line:

L.3.9 Water Sprinkler System in Accommodation NOAutomatic activation:Working pressure (psi):Tank capacity (gal):Salt water backup:Type (wet pipe/dry pipe):

L.4. BREATHING APPARATUS

L.4.1 General Sets NONEQuantity:Make:Type (demand/positive pressure):Cascade system quick connects:Cylinder duration (min):Located at (qty/loc):Located at (qty/loc):Located at (qty/loc):Located at (qty/loc):Located at (qty/loc):Located at (qty/loc):

L.4.2 Escape SetsQuantity: 28Make/Type (demand positive pressure: OCENCO INC.POS. PRESS.Cascade system quick connects: NOCylinder duration (min): 15 MIN.Located at (qty/loc): SAFETY ROOMLocated at (qty/loc): Quantity: 11Make/Type (demand positive pressure: Survive Air & SCOTT-DEMANDCascade system quick connects: NOCylinder duration (min): 30 MIN.Located at (qty/loc): TV ROOMLocated at (qty/loc):

L.4.3 Cascade Stations NOQuantity:Make/Type:Manifold locations/outlets at location:Manifold locations/outlets at location:Manifold locations/outlets at location:Manifold locations/outlets at location:Manifold locations/outlets at location:Manifold locations/outlets at location:

L.4.4 Breathing Air Recharge Compressor: NOQuantity:Make/Type:Compressed air storage capacity (cu ft): Working pressure (psi):Located at:

L.4.5 Compressed Air Breathing Apparatus Trolley Unit NOMake/Type (demand/positive pressure):Air line length (ft):Compressed air storage capacity (cu ft): Working pressure (psi):Including Face mask: Demand valve: Microphone: Safety harness: Safety line (incorporating phone line):

L.4.6 Air Purity Test EquipmentQuantity:Make/Type:

L.5. EMERGENCY FIRST AID EQUIPMENT

L.5.1 First Aid Kit YESQuantity: 6

L.5.2 Burn KitsQuantity: 3

L.5.3 ResuscitatorsQuantity: 2Charged (spare) oxygen cylinders: 6

L.5.4 StretchersQuantity: 1Type: STOKES LITTERLocated at: INFIRMARY

Quantity: 2Type: COLLASABLELocated at: INFIRMARY

Quantity: 1Type: XRAY Translucent BackboardLocated at: INFIRMARY

L.6. HELIDECK RESCUE EQUIPMENT

Aircraft Axe:Large fireman's rescue axe: YESCrowbar: YESHeavy duty hacksaw: YES Spare blades: YESGrapnel hook YES Length of wire rope attached (ft): 25 FTQuick release knife:Bolt croppers: YESFireman's outfit: YESCO2 Lance:Other:Other:

L.7. EMERGENCY WARNING ALARMSApproved system to give warning of different emergencies: YESActivated from drill floor: YES

L.8 SURVIVAL EQUIPMENT

L.8.1 LifeboatsMake/Type: Watercraft AmericanQuantity: 2Capacity (persons/craft): 58 per BOATLocations (fore,aft,port,stbd):Fire protection: YESRadios/EPIRB (see Section H.9): YES & SARTSFlares: YESFood: YESFirst aid kits: YES

L.8.2 Life RaftsMake/Type: ELLIOTQuantity: 3Capacity (persons/craft): 25 MANDavit launched: NOLocations (fore,aft,port,stbd):Fire protection: NORadios: YESFlares: YESFood: YESFirst aid kits: YES

Make/Type: ELLIOTQuantity: 1

Capacity (persons/craft): 20 MANDavit launched: NOLocations (fore,aft,port,stbd):Fire protection: NORadios: YESFlares: YESFood: YESFirst aid kits: yes/no

L.8.3 Fast Rescue Boat NOMake/Type:Engine power (hp):

L.8.4 Personal Floatation DevicesMake/Type: Safegard Style 198Quantity: 142

L.9.5. Survival Suits NOMake/Type:Quantity:

Make/Type:Quantity: