A unique concept for smart cable management...approach to product development, production, marketing...
Transcript of A unique concept for smart cable management...approach to product development, production, marketing...
X-Tray®
Myriad Pro Condensed 12 pt Capitals White
Wire Tray SolutionsA unique concept for smart cable management
NHP Electrical Engineering Products 1300 NHP NHP nhp.com.auAUS
TERMINATION AND WIRING SYSTEMS
22
Why Choose NHPThink local, increased choice and customisation. Think NHP.Founded in 1968 NHP has 50 years of experience with power distribution and motor control technology and applications. We are committed to providing customers with internationally recognised products backed by local expertise, extensive stock holding and professional service.
We are proud to continue the core focus of our heritage, servicing our customers in conjunction with a vast global network of supply partners that enable us to bring the world’s best products and solutions to the local market, customised to suit local applications.
With local teams across Australia and New Zealand, NHP’s expertise and support offering is strengthened by long standing global partnerships with world class supply line partners.
For your next project, think NHP.
The Power of Local. The Power of NHPNo matter how good a product may be, it is nothing without dedicated people to support that product - and at NHP, we have you covered. Our strength lies in providing choice to our customers – be that choice in product, choice in technology or choice in service and support, the kind of choice you only get from a local provider.
Throughout the entirety of the manufacturing process, our agile framework means we can adapt with the local market and our commitment to a personalised service ensures you can expect a dedicated point of contact throughout your project. Aligning with the integrity of the design process our manufacturing process brings the highest levels of quality assurance and testing, safety, standards compliance and production quality.
Victorian Manufacturing Hall of Fame In 2012 NHP became proud inductees into the Victorian Manufacturing Hall of Fame which acknowledges those who have displayed a sustained contribution to manufacturing excellence. Established in 2001, the Victorian Manufacturing Hall of Fame recognises companies and individuals who have the dedication, creativity and energy to take Victorian manufacturing to the next level.
2
33
Axelent
Axelent Wire Tray
Axelent AB is a family owned company that has specialised in the manufacture
of mesh panels since 1990. During this time they have formed an integrated
approach to product development, production, marketing & sales, support and
logistics that has made Axelent a world leader in its business segment. Their
products are found worldwide and we have sales offices in over 50 countries.
The Axelent Group comprises of Axelent AB, Axelent Wire Tray AB, Axelent
Engineering AB and Axelent Software., with head office is in Hillerstorp in
southern Sweden.
Axelent AB is a rapidly growing company that develops, manufactures and
markets a complete cable routing system based on wire trays under the brand
name of X-Tray. Axelent have created a premium brand with regard to ultimate
design, functionality, materials and service. Customer collaboration is another
key aspect. Axelent appreciates customers with high demands because it
enables them to continuously develop tailored solutions. Axelent’s close
proximity to their design and production teams and, not least, a passion for
innovative and smart solutions, means Axelent can quickly move from concept
to finished product.
Today, products are sold all over the world and are mostly found in the energy,
infrastructure, food, machinery, off shore and telecom & data industries.
Axelent Wire Tray AB is part of the Axelent Group.
444
X-Tray – The complete concept
• The Specification
• The Calculation
• The Supply
• The Total Costs
• The Solution
• The Support
• The Job
• The Looks
What do you get out of it?In Axelent you meet a passionate team with many years' experience of cable routing. Their concept is based on collaboration with customers and suppliers, which keeps Axelent alert to opportunities as they arise in all types of projects, whether it be the standard range, or a solution tailored to your needs. The system is simple and flexible to use and the longest spacing between support brackets on the market gives you a cost-effective solution with regard to the number of parts and their installation. Axelent can give you the best visual presentation and the fastest quote.
X-Tray is about reducing the costs. Fewer supports and fewer parts bring down the overall cost.
• Rapid Assembly – Neat Installation – Secure Results
• Small range that is flexible for a complete installation
• Unique assembly with the U-Bar system
• Only two tools required: Bolt cutters and a 13 mm spanner
• Only M8 bolt to all installations
• Optional placement of joints between the support brackets
• A range of materials and finishes for a variety of environments and needs
• All the trays are labelled with the material abbreviations
• The system is tested in compliance with IEC 61537
• Customised solutions for optimum functionality
• The strongest quick joining on the market
X-Tray is about reducing costs. Fewer supports and
fewer parts bring down the overall cost
555
We consider the installers. Our bags are specially designed to stand firm so that all the parts stay in the bag.
66
A Premium Brand from start to finish!From the outset, the development of X-Tray has focused on creating a premium brand within cable routing systems. We deliver a solution that is tailored to your needs. Axelent designed their production plant themselves to live up to our prime quality pledge. Quality and flexibility are Axelent guiding lights, and nowhere does this shine through more clearly than in the fact that we test and pass each individual weld.
Axelent are proud of their origins and the expertise that abounds in our region, which is why most of their suppliers are local companies. This gives Axelent continuous control of the quality levels and a greater possibility to speedily launch into new product developments, adaptations and solutions. In Axelent you meet a team that not only possesses lengthy experience of wire trays, but also the
ability to find solutions that are tailored to your needs. The close cooperation between the design and sales teams enables Axelent to find rapid adaptations and solutions outside our standard range.
Axelent state-of-the art warehouse has the facility to customise packaging. Every day we put together customised solutions, kits and adaptations.
Axelent design and product development team performs daily tests on standard products as well as new customer-specific solutions to ensure quality the whole way
In this brochure you can read about how Axelent tested X-Tray and the solutions they can offer that are tailored to your specific needs.
Example of a customer-specific product
Example of a customised product kit.
X-Tray 120x60x25002 Pcs
X-Tray 120x60x12002 Pcs
X-Tray 120x60x23001 Pcs
X-Tray 220x60x18001 Pcs
X61 Bolt M825 Pcs
X62 Flange Nut M825 Pcs
X1 Fitting16 Pcs
X3 Angled Bracket7 Pcs
X5 Joining Fitting4 Pcs
X14 Pendant 2806 Pcs
X17 Support Hook6 Pcs
X10 Bracket3 Pcs
X15 Bracket2 Pcs
WEIGHT:
SCALE:1:20
Unless otherwise specified: Dimensions in MM, Tolerances ISO 2768 M
Created by
DateArticle number Material Surface Drawing number
Magnus Svensson
Rev no Revision note Date Created by Approved by
Approved by
09-09-2015
Sheet A3
Description
Drawing and design is the copyright of Axelent Wire Tray AB and must not be copied without prior consent
Kit "Brovalla"
111213-37111213
7
60
40
20
02.0 2.25
24 kg/m
2.5 2.75 3.0
Kg/m
100
80
60
40
20
02.0 2.25 2.5 2.75 3.0
Kg/m
41 kg/m
120
100
80
60
40
20
02.0 2.25 2.5 2.75 3.0
Kg/m
59 kg/m
7
Optional placement of joints between the support brackets
X-Tray complies with the highest demands on cable routing systems as laid down in IEC 61537.
Cable management – IEC 61537 – Cable tray systems and cable ladder systems“This International Standard specifies requirements and tests for cable tray systems intended for the support and accommodation of cables and other electrical equipment in electrical and / or communication systems installations”.
The strength of the wire trays and mountings makes their installation simple, strong and economical. Support distance can be increased, therewith reducing the amount of installation work and overall costs.
Our diagram shows the recommended load in accordance with IEC 61537. 1.7 times these values gives the maximum permitted load.
Tested and approved
X-Tray® 60x60 mm
Equally divided load. Optional placement of the joints between the support brackets.
Recommended load
1.7 times these values gives the maximum permitted load in compliance with IEC 61537.
X-Tray® height 110 mm
Equally divided load. Optional placement of the joints between the support brackets.
X-Tray® height 60 mm
Equally divided load. Optional placement of the joints between the support brackets.
Recommended support distance 2.25 m.
Recommended load
Recommended support distance 2.25 m.
Recommended support distance 2.5 m.
Recommended load
Load diagram
8
*
8
Environment- demand on surface treatment and/or classification of installation based on standards, given by use, area or specified demands.
ENVIROMENT
Longer distance between supports - less work and costs.
SUPPORT DISTANCE
INSTALLATION
Weight and volume of cables, consider future needs.
Additional weight from point loads.
ADDITIONAL WEIGHT
Installations: wall, from ceiling or on floor.
Tested for equipotential bonding.
EQUIPOTENTIAL BONDING
WEIGHT / VOLUME
Choice of wire trayYou should consider the following when choosing a wire tray.
Over and above IEC we have tested and certified our trays in the following areas:
X-Tray ® R Certifications:
• Material
• Welding
• Load
• Identification
• EMC
• Surface treatment
• Vibrations
• Fire
*Our UL certification also gives us NEMA APPROVAL.
99
OK
OK
OK OK
OK
9
Surface treatment recommendations
Zink/NickelHot Dip galvanized will on some parts be replaced by Zinc/Nickel (DIN 50979). Zinc/Nickel is electrolytically inorganic corrosion-resistant coatings that meet most requirements for extremely corrosive environment. Zn-Ni containing 12-15% nickel in the layer and provides good corrosion
Zinc Plated
Hot Dip Galvanized*
Stainless/Acid Proof 316L
*) Zinc/Nickel (SS-EN ISO 11997-1, DIN 50979) on some parts
Food Infra- Telecom/ industry Off shore structure Energy data Machine
Optimal Possible Not recommended
protection even in thin layers. Along with a polished or black passivation can be more than 720 h (according to ISO 9227, NSS) to the base metal corrosion is achieved. Zinc/Nickel can be used together with aluminium.
C1 Zinc Plated – FzbFor indoor environments such as schools, shops, hotels, offices, sports halls, etc.• Very low environmental corrosivity• Heated spaces• Dry air• Insignificant amounts of pollutants• DIN 50961/ISO 2081
C4 Hot Dip galvanized – FzvFor indoor and outdoor environments such as chemical and heavy industries, coastal areas, swimming halls, shipyards, etc.• High corrosivity• Areas with high humidity levels and large
amounts of air pollutants• Surroundings with a moderate salt
content or substantial amounts of air pollutants
• EN-ISO1461:2009
C2 Hot Dip galvanized – FzvFor outdoor environments such as industries, sports facilities, ice rinks, warehouses, shops, parking garages, farming environments, etc.• Low to moderate environmental
corrosivity• Non-heated spaces with fluctuating
temperature and humidity• Low frequency of condensation and
low level of air pollutants• EN-ISO1461:2009
C3 Hot Dip galvanized – FzvFor indoor and outdoor environments such as industries, dairies, breweries, laundries, urban environments, etc.• Moderate environmental corrosivity• Places with a moderate amount of
humidity and some air pollutants from production processes
• Surroundings with some salt content or moderate amounts of air pollutants
• EN-ISO1461:2009
C5-M Acid-proof AISI 316LFor indoor and outdoor environments such as heavy industry, coastal and offshore areas, purification plants, etc.• Very high corrosivity (marine)• Spaces with almost permanent
condensation and large amounts of air pollutants
• Surroundings with a high salt content• SF/AISI 316L
Axelent Wire Tray covers all corrosion classes
1010
The Cable Tray Constitutes a Conductor for Equipotential Bonding – MUST NOT BE BROKEN
Tested for equipotential bonding
In some installations the wire tray needs to be equipotentially bonded. This is to secure protective bonding or functional bonding.
Protective bondingThe main reason for protection bonding is to protect against electrical shock that could be caused by faults in the electrical system. This is remedied by connecting the wire tray to the main earth terminal in the building.
Functional bondingThis is done to minimise the impact of electrical and magnetic fields (EMC).
It is carried out in the same way as with protective bonding, i.e. by connecting the wire tray to the main earth terminal in the building.
In compliance with IEC61537
Requirements and testsThe IEC 61537 standard lays down the requirements placed on a wire tray to ensure electrical continuity. Among other things, the impedance must not exceed 50 mOhm over joints or 5 mOhm X number of meters of wire tray.
X-Tray has been tested and complies fully with IEC 61537.
The tests were conducted by the Research Institute of Sweden (SP) with test report numbers PX16030 and 5F015879.
NB. X-Tray wire trays must never be used as protective bonding conductors, earth conductors or any other type of protective conductor.
1111
During a fire it is important that certain things maintain their functionality.
This could involve the activation of alarm system, emergency lighting, sprinkler system and smoke detectors, or other things that could save lives during a fire. This could be a long list.
It is always a good for wire trays to withstand a fire for as long as possible.
The German DIN 4102-12 standard is used for testing this, a standard that is designed to test complete systems of wire trays, accessories and cables.
Wire trays and cables are put in an oven and heated for 90 minutes until the temperature has reached 1000 degrees Celsius.
To be approved the cables must still be in a usable condition.
Approval comes in three classes: E30, E60 and E90, this is for how many minutes the wire trays and cables are still functional.
X-Tray has been approved at the highest class, E90.
The test was carried out the test at IBMB (Institut für Baustoffe, Massivbau and Brandshutz) i Brauswieg, Germany.
IBMB is a prestigious, independent testing institute that issued the approval in accordance with the DIN 4102-12 standard.
The trays, brackets and cables were approved together.
We have tested several batches of wire trays in combination with several different cables.
X-tray® excels in the toughest environments!
E90 Fire Test
121212
1313
Food & Clean Room• Provides project support with specialist knowledge of
clean rooms
• Tailored clean room products and solutions
• Long bracket spacing, up to 3 m, gives fewer brackets to clean and a cost-effective installation
• 304L and 316L wire trays are always in stock
• Tailored products for fitting hoses and pipes
• Specially designed brackets welded on site when required
X-Tray for premises with hygiene demandsTo meet the high demands put on the food industry and other clean rooms, together with the industry we have developed a well-functioning cable routing system. The products are also adapted to the installation of pipes and hoses.
Wire trays are well suited for use in clean rooms. They have next to no dust traps and no holes where bacteria can thrive. They are easy to vacuum or clean with water.
The support brackets and parts have very small surfaces where grime and dust could settle.
Read more about our specific product range for the food industry on our website.
Tips/Regulations for fitting in high / medium and low / service hygienic zones.
• Two methods are allowed for mounting wire trays: - Vertical (side of the tray upwards) in medium / high hygiene zones. - Horizontal and vertical in low hygiene zones and service rooms.
• The mounting of wire trays over production machinery is not permitted.
• Only one layer with cables or pipes / hoses in high hygiene zones.
• If possible, use separate wire trays for different types of cables. In cases where the same tray is used for both signalling and power cables, they should be kept well apart. If possible, the space between power cables and signalling cables could be filled with pipes and hoses.
• Parallel trays must be mounted at a minimum of 100 mm spacing to allow access for cleaning.
• Pipes and hoses should first hand be fitted in trays carrying power cables. No extra trays for pipes and hoses unless absolutely necessary.
• Equipotential bonding / EMC: - All trays must be connected to the earth terminal by copper wire at both ends of the tray. See separate instructions.
• Choice of material / surface treatment in different hygiene zones: - High hygiene zone, dry installation = Zinc Plated. - High / medium / low hygiene zone, wet installation = 304L or 316L depending on the types of chemicals in the room and when washing the wire trays. - Service rooms and outdoors = Hot Dip galvanized.
1414
Off Shore• Provides project support with specialist knowledge of
off shore
• Tailored products and solutions for platforms, ships and ports
• Long bracket spacing, up to 3 m, gives fewer brackets to fit and a cost-effective installation
• Hot dip galvanized and stainless material 304L and 316L is always in stock
• Tailored products for fitting hoses and pipe
• Approved by DNV-GL for use within global off shore
Installation tipsA small number of standard products that can be used in a variety of ways simplifies the installation.
Extensive logistics are used to deliver material to a platform. Should a product be missing when working on a platform or ship this can often be remedied with the products you have with you.
X-Tray is a ‘field pack’ and the job will nearly always get done.
The support distance of up to 3 m makes it easy to use existing constructions on platforms and ships to mount the trays.
Strengthened wire trays for support distance of up to 6 m are available.
The trays are simple to cut and shape using bolt cutters. No ‘hot work’ is required. This is a great advantage on platforms and ships where there is a great risk of fire.
There is equipment to fasten instrumentation lines to the wire trays.
1515
Telecom & Data• Provides project support with specialist knowledge
of telecom & data
• Tailored products and solutions for telecom & data
• Long support distance, up to 3 m, gives fewer brackets to fit and a cost-effective installation
Installation tipsA telecom and data centre is packed with cables. This is electrical equipment that generates a lot of heat. There are requirements for cooling air to pass freely through open cable routing. Electrical equipment and cables are changed continuously. There are high demands on space and accessibility around the racks and cabinets. Orderliness is crucial in this environment.
X-Tray can offer a unique system together with a genuine knowledge of the requirements of telecom & data centres and server rooms
Our wire trays, in combination with our U-Bar system, provide solutions that meet the requirements.
X-Tray enables you to install cable routing at different levels to separate different types of cables. Above the server rack as well as under the raised floor.
Our unique U-bar system offers limitless combinations. We have solutions and equipment for building your own 19” rack. Accessories like horizontal and vertical cable ducts give you an open rack with ample working space around it and free passage for cooling air.
All parts of the system are compatible with each other and it is easy to assemble the installation together into one unit.
We possess the expertise and the products for installing in small terminals specially designed for the distribution of telecom and broadband in small communities and rural areas.
With accessories like radius limiters, separating plates and telecommunication chutes we can offer a turnkey solution for cable routing and server racks.
NB. Read more about our X-Rack on page 30.
1616
Infrastructure• Provides project support with specialist knowledge of
infrastructure
• Tailored products and solutions for infrastructure
• Long support distance, up to 3 m, gives fewer brackets to fit and a cost-effective installation
• Tailored products for fitting hoses and pipes
Installation tipsFor installations that require fire safety, X-Tray has E90 certification.
X-Tray has been tested and approved for equipotential bonding. Our wire trays are also perfectly suited for use in EMC-sensitive areas.
For tunnels, mines and places that require an extra strong
routing system, we offer our C and G trays that provide extra cable protection. These trays also guard against falling rocks and other objects.
If greater bracket spacing is required, we have extra strengthened C trays that cope with up to 6 m between the brackets.
X-Tray is the perfect solution for hospitals, airports, railway stations, schools, sports halls, etc., and we have the products and the expertise to install them.
1717
Energy
• Provides project support with specialist knowledge of energy production
• Tailored products and solutions for energy production
• Long support distance, up to 3 m, gives fewer brackets to fit and a cost-effective installation
Installation tipsEnergy production puts great demands on materials. X-Tray has a strong basic construction and lasting quality.
Wind power and nuclear power require extra security. X-Tray products are tested for vibration and earthquakes. Approved by DNV-GL for global use.
Wind turbines do not have an awful lot of space. It is a tough environment, often at sea, and the construction is subjected to constant vibrations. This is where wire trays come to the fore with their slim design, conformability, extra strong welds and low weight. We can offer products that are perfectly suited for the job at hand.
Nuclear power plants put high demands on quality and durability. There are often demands for earthquake-resistant constructions. This is where X-Tray comes in with its strong basic construction and secure welds that guarantee lasting quality.
1818
Process Machinery
• Provides project support with specialist knowledge in industrial machinery
• Tailored products and solutions for process machinery
• Long support distance, up to 3 m, gives fewer brackets to fit and a cost-effective installation
• Tailored products for fitting hoses and pipes
Installation tipsA small number of standard products that can be used in a variety of ways simplifies the installation.
The lack of space around machinery and production lines calls for complex installations. When machines are designed, not much consideration is given to the cable routing. X-Tray is simple to shape and cut to the required fit. Bolt cutters, a 13 mm spanner and a few brackets are all that is needed.
The X-Tray U-Bar system makes it easy to build constructions in which to fix wire trays and other equipment.
1919
Paper Mills & Chemical Industries• Provides project support with specialist knowledge of
paper mills and chemical industries
• Tailored products and solutions for paper mills and chemical industries
• Long support distance, up to 3 m, gives fewer brackets to fit and a cost-effective installation
• Tailored products for fitting hoses and pipes
Installation tipsIndustries like paper mills, chemical plants, surface treatmentplants, oil refineries, etc., usually have a high content of aggressiveacids in their environment. X-Tray has a range of materials for the different needs. Hot dip galvanized, stainless steel in 304L or 316L are the materials best suited for such environments.
Some constructions are rapidly destroyed and have to be replaced at regular intervals. Production and process lines are complex constructions and can be expensive when standing idle for service and maintenance work. X-Tray’s ingenious solutions bring maintenance and service work down to the absolute minimum.
One good example of this is a paper pulp production line where the wire trays and electrical installations need to be replaced. The time-consuming job of mounting cables and electrical equipment can be done on the floor next to the machine while the production line is still in operation. The new equipment can then be lifted into place in one piece and the machine only needs to be switched off when mounting the new cables. A job that normally takes two to three days is completed in just a few hours.
2020
Saw Mills and & Farm Stables • Provides project support with specialist knowledge
in saw mills and farm stables
• Tailored products and solutions for saw mills and farm stables
• Long support distance, up to 3 m, gives fewer brackets to fit and a cost-effective installation
• Tailored products for fitting hoses and pipes
Installation tipsSaw mills and farm stables are usually very dusty environments. This makes them highly attractive to vermin like rats and mice, therewith putting great demands on the installation of cables and electrical equipment. X-Tray has specially designed products to meet these needs. One prime example of this is the possibility of installing wire trays vertically to minimise dust traps and spaces for rats and mice to move about in.
Damp environments and aggressive chemicals like ammonia, etc., are not unusual in saw mills and stables. For these environments, X-Tray has hot dip galvanized and stainless steel products in 304L and 316L.
Milking and washing areas in stables usually require stainless installations. For this we have 304L and 316L material.
Extra strengthened trays for support distance of up to 6 m are available.
2121
The natural choice for X-Guard®
X-Tray wire trays integrate easily with Axelent’s
X-Guard machine guards.
Together they are the optimum choice.
Our wire trays are strong, flexible and easy to fit. You can create elegant solutions without the need for special tools. Just like X-Guard, only a few brackets and tools are required. By combining X-Tray & X-Guard you get maximum flexibility from a minimum amount of material. Simple and smart. Thanks to the almost endless possibilities, despite few components, you do not need to spend time and money on additional orders to complete your project
Easy to combineAxelent’s X-Tray is the perfect solution for wire trays together with X-Guard machine guard.
No special toolsThe combination is easy to assemble without the need for any special tools.
One supplierTurnkey solutions from one supplier make project implementation quick and easy.
22
Coils
Cutting Welding Bending Robots for handling
Built to perfectionMANUFACTURE
Welding wire is nothing new to Axelent.
They have been welding wire since 1979 and designing their own welding plants since 1999. Axelent know all about welding.
It was therefore obvious to Axelent that no standard welding plant on the market could fulfil our prime quality demands. When wire trays are used in critical applications, a high weld quality is an absolute must. Axelent have therefore designed and built their own production plant with the focus on prime quality, efficiency and flexibility.
Axelent’s plant has the capacity for producing more than 10 km a day without losing a flexible approach. The possibility to customise products in length, width, breadth, height and shape is the hallmark of Axelent Wire Tray.
Welds are individually welded and inspected to guarantee the strongest wire tray on the market. The wire ends are softly rounded to to remove all sharp edges so when hands and cables are run along the tray the contact is always soft.
Contact us to find out more!
232323
24
X18
X16
X11
X12
X2
X64
X60
X72
X4
X30
X63X1 X33
X33
X36
X30X35
X10
X3
X15
X33
X5
24
X1 Fitting X2 Fitting X3 Angled Fitting X4 Fitting X5 Joining Fitting X10 Bracket X10 Mini Bracket X11 Pendant/H X12 Flexible Pendant X13 Side Support X14 Pendant/L X15 Bracket X16 Floor Support X17 Support Hook 120-320 X18 Support Hook 420-620 X30 Threaded Rod X31 TR Support Hook X33 TR Adaptor X35 TR Distance Nut X36 TR Beam Clamp X50 U-Bar
Article
X51 U-Bar Joining Fitting X52 U-Bar Corner Fitting X53 U-Bar Adjustable Foot X54 U-Bar End Cap X60 Radius Limiter X61 Bolt M8x27 X62 Flange Nut M8 X63 Accessories Holder X64 L-Divider X65 Cover X66 Divider X67 Divider Clamp X68 Earth Screw X70 Marking Clip X72 Safety Cap
Article
25
X15
X67X66
X36
X30
X17
X35X15
X14
X68
X53
X10X11
X17
X68
X50
X13
X31 X70
X11
X14
X16
X10
X54
X65
X50
X50
X51
X11
X11
X3
X2
X5
25
26
220 x 60
60 x 60
120 x 60
420 x 60
75 x 55 x 4 *75 x 55 x 5 *
520 x 60
620 x 60
• Non stocked items contact NHP for ordering information
26
Trays 60
Overview Trays
All Trays are in standard 2,5 meter
27
520 x 110
320 x 110
120 x 110
220 x 110
420 x 110
620 x 110
C120 x 80
C220 x 120
C68 x 70 G60 x 100
30 x 22 40 x 22
40 x 32
G120 x 150
• Non stocked items contact NHP for ordering information
27
Trays 110
G-Trays*C-Trays*
Mini-Trays
2828
X1 Fitting X2 Fitting X3 Angled Fitting X61 Bolt X5 Joining Fitting X62 Flange Nut
X10 Bracket X11 Pendant/T X12 Flexible Pendant X13 Side SupportX10 Mini Bracket
X15 BracketX14 Pendant/L X16 Floor Support X17 Support Hook 120-320
X18 Support Hook420-620
X30 Threaded Rod X31 TR Support Hook X33 TR Adaptor X35 TR Distance Nut X36 TR Beam Clamp
Fittings
Mountings
Threaded Rod
Overview of Accessories
2929
X53 U-BarAdjustable Foot
X54 U-BarEnd Cap
X51 U-Bar Joining Fitting
X50 U-Bar X52 U-BarCorner Fitting
X63 Accessories Holder
X64L-Divider
X65 Cover
X60 RadiusLimiter
X66 Divider
X67 Divider Clamp
X68 Earth ScrewX68 Equipotential Bonding Screw
X70Marking Clip
X72 Safety Cap
Accessories are design protected.
Subject to change without prior notice.
X76 Spanner 13 mmX75 Bolt Cutter
U-Bar
Accessories
Tools
3030
X
X
X
X
X
30
Smart solutions – Flexible installations
With X-Bar and a few accessories you can create data racks
according to your specifications.
You can mount your equipment in the front, back or in
center of the rack.
Depth and height of the rack is interchangeable depending
on the length of X-Bars used.
Our X-bars are available in various sizes but can easily be
altered to desired size and or you can order them to specified
measurements.
All parts are ordered separately so you can easily adjust and
adapt to your needs, thus easier to transport and quicker
installation.
An advatage is that you can easily mount the trays directly
on to the X-bars without the need for brackets or pendants.
Accesories as radius limiters and cable ducts are available for
safe and easy cable management.
Compared to a normal computer rack you get the following advantages:
• Low cost
• Better availability
• Better cooling effect
• Low maintenance cost
• Various height and depth possibilities
• Require less space
• Easy to transport
• Easy to adjust
• The cable management can be integrated into X-Rack
X-Rack one of the most flexible and strong open rack systems on the market. Modular and easy to fit to your specific needs.
X-RackModular and
easy to fit
313131
Our product range also includes our X-Tray brand. X-Tray is a range of smart and flexible wire trays that are compatible with the X-Guard system. The product is durable, quick and easy to install, and like X-Guard, only needs a few tools and couplings.
*Black Zinc available via Special order.
No machine guard is complete without X-Tray®
X-Tray wire trays integrate easily with Axelent’s X-Guard machine guards.
Together they are the optimum choice.
Axelent wire trays are strong, flexible and easy to fit. You can create elegant solutions without the need for special tools. Just like X-Guard, only a few brackets and tools are required. By combining X-Tray & X-Guard you get maximum flexibility from a minimum amount of material. Simple and smart. Thanks to the almost endless possibilities, despite few components, you do not need to spend time and money on additional orders to complete your project.
Easy to combineAxelent’s X-Tray is the perfect solution for wire trays together with X-Guard machine guard.
No special toolsThe combination is easy to assemble without the need for any special tools.
One supplierTurnkey solutions from one supplier make project implementation quick and easy.
3232
NHP Electrical Engineering Products A.B.N. 84 004 304 812
IC_93492_Axelent X-Tray_C 02/18
© Copyright NHP 2018
For more information, scan to download the NHP eCatalogues App o�ering exclusive video content, catalogues and literature!
For more information, scan to download the NHP eCatalogues App offering exclusive
video content, catalogues and literature
AUSTRALIAnhp.com.au
SALES 1300 NHP NHP