A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
-
Upload
etienne-gernez -
Category
Documents
-
view
219 -
download
0
Transcript of A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
1/14
What?
A maritime design toolFor industrial design & naval architecture
In collaboration with:
Maritime Research Laboratory
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
2/14
Fold out projection surface
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
3/14
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
4/14
Naval architects
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
5/14
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
6/14
Initial concepts
Sketch
Try outImprove
Focus:Interface design
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
7/14
List of demands
Avatar
Enable user studies on board ship - Ability to have two way communication (Of ce - ship) - Capture video (360) - Capture photo (360) - Capture sound (360) - Ability to operate from a distance - Ability to record operators view User test interface ideas and evaluate concepts - Screen - Gesture - Sound Document and log user data - Video - Sound - Motion tracking - Eye tracking Practical requirements - Powered by standard 230v plug - Use standard components(Projector etc.) - Cost ef cient casing for components - Not disturb ongoing operation
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
8/14
ID Field trip
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
9/14
Zzz...
ID Field trip
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
10/14
Before During After
BriefResearchPlanning
InstallationIntroduction & TutorialObservation
ObservationInterviewsConcept developmentUser feedbackObserving
Installation
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
11/14
A window to theDesign studio
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
12/14
Modular avatar
Off the shelf components
Rapid prototyped casing
On demand product
Custom casing for standard componentsSince this unit will be produced in such a small quantity, pro-duction technique have to be taken into consideration in anearly stage. Developing a advanced technical product is ex-tremely expensive and complex. By using standard productsand have them work together in a custom designed casing.This cost could be cut signi cantly. The casing can be producedby 3D printed, laser cut and cnc milled to get a accurate t andfunction to fair price. This would also allow for simple upgradesan customization of the units.
In the example below, the unit are equipped for video confer-ence, observation, Projection and motion tracking. The projec-tor could be switched to a stereoscopic projector in order toprovide 3D visualizations.
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
13/14
360 Camera unit(Motorized)
Stabilizing projector
3D scanner(Kinect)
Motorized mirror(Re ecting projector)
Stand mount
Standard windows tablet(works as screen andCPU)
Ethernet cable (Hooks up to ships com-puter system & logs data)
Shock absorbing stand(For outdoor use)
Or...
Roof/ Wall/Floor mount(For indoor use)
Custom made casing
holding all components.(3D printed / Laser cut /CNC milled)
-
8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013
14/14
What now?
Avatar
Selecting components - Projector, tablet camera etc.
Sketch quantitative structure - Placement of components Concept feedback from EGGS - Over all concept feedback - Non eld trip design input Concept model mockup - Cardboard model