A KNX/EIB protocol BUS system for Home and Building ... · A KNX/EIB protocol BUS system for Home...
Transcript of A KNX/EIB protocol BUS system for Home and Building ... · A KNX/EIB protocol BUS system for Home...
A KNX/EIB protocol BUS system for Home and Building Automation.BUS systems constitute a modern technology for the realization of systems in residential and commercial buildings and industrial complexes. This technology is offered as a valid alternative to traditional installation techniques. The range of GEWISS EIB BUS products is able to manage broad solutions for home and building automation.
ETS® 3 is the software for programming KNX/EIBdevices. It allows to allocate the physical address, the creation of logical groups and the configuration of devices.ETS works with every constructors' KNX device. With ETS it’s necessary a products database: it contains all realizable functions and configuration parameters for every device.ETS has a smart graphic interface which simplifies the programming, even of complex systems.
Features: Configuration unit of KNX/EIB Easy system, allows the management of a BUS line formed of up to 64 devices. Includes a BUS power supply unit with a maximum output current of 320mA plus actuator with 8 output channels (230Vac,10A) with potential-free contacts. Integrates a timed programmer with four output channels and a scenes module.
BASE UNIT / CONFIGURATOR
Easy Standard Unit – DIN RAIL MOUNTING
Features: BUS interface for connecting 4 push-buttons or conventional potential-free contacts. The reading voltage (SELV) is generated inside the device. For each input there is an output available to power a low power consumption LED to visualise the status of the commanded load. To be configure with ETS software.
BINARY INPUT MODULES
EIB 4-Channel Contacts Interface - Retractable
Art noPower supplyVoltage
Output Voltage
Max currentSupplied
No. DIN Modules
GW 90831 EN 230 Vac 50/60Hz 30V dc ± 2V 320mA 12
Art noNo. inputchannels
No. outputchannels
Max cables length
Dimensions LxHxD (mm)
GW 90721 4 4 10m 38x32x14mm
92
Features: push-button with 4 button keys/4channels, with integrated coupling unit for KNX/EIB BUS. Each key is associated with an amber LED for night-time localisation, and a green LED to visualise the status of the commanded load. To be configure with ETS software.
EIB 4-Channel Push Button Pannel (Flush Mounting)Art no Colour
No.channels
No. modulesChorus
GW 10782GW 12782GW 14782
WhiteBlackTitanium
444
222
Features: 1-channel actuator for activating loads via potential-free output contact (NO/NC). Equipped with front-push button for local implementation, signalling LED for closure of output contact and night-time localisation LED. To be configure with ETS software.
OUTPUT / ACTUATOR
EIB 4-Channel 16A Actuator Flush-MountingArt no Colour
Output contacts
No. modulesChorus
GW 10796GW 12796GW 14796
WhiteBlackTitanium
1NO/NC16A(AC1)/10A(AC15) 230Vac1NO/NC16A(AC1)/10A(AC15) 230Vac1NO/NC16A(AC1)/10A(AC15) 230Vac
222
Features: 1-channel actuator for activate a motor to move roller-shutters, curtains, venetian blinds, rolling blinds, etc. via potential-free output contacts (NO). Fitted with two frontal push-buttons for local activation, two LEDs indicating output contact closure, and two LEDs for night time locating. To be configure with ETS software.
EIB 1-Channel 8A Engine command Actuator Flush-Mounting Art no Colour
Output contacts
No. modulesChorus
GW 10797GW 12797GW 14797
WhiteBlackTitanium
2NO 8A(AC1)/5A(AC15) 230Vac2NO 8A(AC1)/5A(AC15) 230Vac2NO 8A(AC1)/5A(AC15) 230Vac
222
Features: A green LED indicates that the device is ready to be used (after the loading of the application with ETS). The device is self protected against short-circuiting and over loading.
Dimmer Actuator for Resistive-Inductive loads with Fixing DIN RAIL MOUNTING 230V IP20 Art no
No. channels
PowerMax
No. modulesChorus
GW 90759 2 300W 6
KNX GSM CONTROLLER
Features: via the GSM network (for example from a mobile phone), with text messages, the device allows you to send commands to KNX/EIB actuators. It is possible to transmit information deriving from devices connected to the BUS, via text messages, to set telephone number. Via a PC (USB gate), it is possible to set the outgoing messages and the telephone numbers to be used for calling. To be configure with ETS software.
GSM EIB Remote Control – DIN RAIL MOUNTINGArt no Power supply voltage
No. modulesDIN
GW 90815 230Vac 50/60Hz 6
MOVEMENT / TWILIGHT DETECTOR
Features: Movement sensor with detection conditioned by the brightness level set. Non-divisible, adjustable lens. Operating range: 10m Vertical bearing angle:30°. Horizontal bearing angle: 105°. Light threshold value adjustable by means of the frontal access trimmer or ETS parameter. The cycle time can be set via ETS and modified (±50%) via front access trimmer. Frontal green LED signals movement detection, and command entry. To be configure using ETS software.
EIB Light Sensitive IR Movement Detector Flush -Mounting Art no Colour
Recovery Time
Threshold Adjustment
No. modulesChorus
GW 10786GW 12786GW 14786
WhiteBlackTitanium
10s – 1min10s – 1min10s – 1min
10 – 500 lux10 – 500 lux10 – 500 lux
222
THERMOSTAT
Features: Timed thermostat, with weekly programming, for controlling the heating/conditioning systems on the KNX/EIB BUS. 3-level temperature profile (comfort, pre-comfort, economy). Adjustable with 2-point control (ON/OFF) or proportional control (PWM). Equipped with backlit LCD display. To be configure with ETS Software.
EIB Thermostat/ Timed Thermostat Wall MountingArt no Colour
DimensionsLxHxD (mm)
Type
GW 10791GW 14791GW 10793GW 14793
WhiteTitaniumWhiteTitanium
130x92x23130x92x2385x95x2385x95x23
Timed ThermostatTimed ThermostatThermostatThermostat
CONTROL PANEL
Features: Control panel with backlit LCD graphic, for commanding and controlling the KNX/EIB system. Equipped with 6 front navigation button keys. Equipped with rechargeable backup battery. To be configure with ETS software.
EIB Command and Visualisation Panel Flush Mounting Lux Art no
Plate colour
Power supply Voltage
DisplayFor flush-mounting Boxes
DimensionsLxHxD (mm)
GW 12789 TBGW 12789 VTGW 12789 VA
WhiteTitaniumWhite
230Vac 50/60Hz230Vac 50/60Hz230Vac 50/60Hz
Monochromatic 2,8”Monochromatic 2,8”Monochromatic 2,8”
GW24237GW24237GW24237
150x160x57150x160x57150x160x57
93