A-F BLOOD DRIPS USING GELEFECTS BASIC ABRASION• black eye shadow INSTRUCTIONS: 1. Apply a little...

40

BLOOD DRIPS USING GELEFECTS®

INGREDIENTS:

• blood GelEfects®

• palate

INSTRUCTIONS:

1. Apply blood to a palate in an irregular shape, depending on the scenario.

2. Lift the palate and allow gravity to pull the material downward, like a blood drip.

3. Leave the blood droplet that forms at the end of the spill for depth and reality.

4. Add blood drips to wounds or lacerations to provide additional reality.

5. For cleanup, just lift the product off the mannequin and place back on a palate for use another day.

Copyright © 2015 CSU Chico Research Foundation on behalf of the Rural SimCenter. All Rights Reserved.

INSTRUCTIONS:

1. Apply the light pink blush in a circular mo-tion to the area you want to be affected.

2. Scrape the stipple sponge over the darker blush to pick up color.

3. Scratch over the light blush in the area of the abrasion.

4. For road rash type injuries, take a bit of ash powder on the stipple sponge and dab on the wound area.

5. Enhance the abrasion with a few strate-gically-placed drops of blood GelEfects® (optional).

INGREDIENTS:

• Stipple Sponge

• light pink blush

• dark red blush

• ash powder

• blood GelEfects® (optional)

BASIC ABRASION

For more information visit: elsevieradvantage.com/SLSTip: Save all drips you make, even if they are not appropriate to the current scenario. You may need additional drops of blood to put on a bandage, or to leak out of an IV.

A-F

44

BLACK EYE

INGREDIENTS:• light blue eye shadow• dark blue eye shadow• red or purple eye shadow• yellow eye shadow• black eye shadow

INSTRUCTIONS:

1. Apply a little of the light blue eye shadow around the eyes and over the area affected. Depending on the injury, you may want to extend the bruising up into the forehead, or over the cheeks.

2. Dab the dark blue and purple eye shadow over the top.

3. Finish with the black eye shadow at the edges of the bruised area.

4. The amount of color depends on the timeframe. So if the wound is older, add the yellow eye shadow in the eye crease — and add more dark blue and black shadow toward the nose and below the eye.


INSTRUCTIONS:






INGREDIENTS:

• Stipple Sponge


• dark red blush

• ash powder


BASIC ABRASION

For more information visit: elsevieradvantage.com/SLSTip: Your scenario should determine the extent of bruising around the eye. So be sure your story supports the injury.

A-F

91

IMPALEMENTINGREDIENTS:• 2 GelEfects® skin pieces

(shaped in an oblong fashion with one piece slightly larger than the other)

• blood GelEfects® • flesh GelEfects® • syringe or toothpick• firm surface or palate• flat spatula or palate knife • knife or scalpel• scissors

• spirit gum or other adhesive• impaled object

(broken plastic plate, small knife, arrow, etc.)


INSTRUCTIONS:






INGREDIENTS:

• Stipple Sponge


• dark red blush

• ash powder


BASIC ABRASION

For more information visit: elsevieradvantage.com/SLSTip: Consider using smooth-on Rubber Glass® in your scenario. It looks like glass, but is flexible and will not cut.

(Continued on next page)

G-L

92

IMPALEMENTINSTRUCTIONS:

1. Make two small strands of fat by dispensing flesh GelEfects® onto a palate using the plastic applicator or a syringe.

2. Using your flat spatula or palate knife, stretch the GelEfects® over the palate and then regroup.

3. Stretch and gather the product like you are kneading dough — and incorporate air to create a bumpy, irregular, and coarse look substance that resembles subcutaneous fat.

4. After the GelEfects® becomes too thick to work with, allow it to dry on the palate.

5. Cut into two small strands about the size of a piece of yarn with scissors.

6. Take smaller skin piece and place the strands of fat to frame laceration area.

7. Fill outline with blood GelEfects®.

8. Put a small slit in the top (larger) skin piece and place over laceration as pictured.


INSTRUCTIONS:






INGREDIENTS:

• Stipple Sponge


• dark red blush

• ash powder


BASIC ABRASION

For more information visit: elsevieradvantage.com/SLSFor more information visit: elsevieradvantage.com/SLS

(Continued)


G-L

93

IMPALEMENTINSTRUCTIONS:


INSTRUCTIONS:






INGREDIENTS:

• Stipple Sponge


• dark red blush

• ash powder


BASIC ABRASION


9. While the blood GelEfects® is still wet, but not runny, carefully insert the impaled object.

10. If necessary, add a bit more blood GelEfects® with a syringe or toothpick.

11. Allow the object to completely dry.

12. Use spirit gum, other adhesive or a few drops of flesh GelEfects® to attach to the mannequin or live actor.

(Continued)

G-L

144

WOUND DEHISCENCEINGREDIENTS:

• two oblong GelEfects® skin pieces • blood GelEfects®

• flesh GelEfects®

• 1-2 cotton balls, depending on the size of the wound

• yellow washable marking pen• red washable marking pen• eye shadow or blush makeup• suture• needle

• needle holder• plastic applicator bottle or syringe• spirit gum or other adhesive


INSTRUCTIONS:






INGREDIENTS:

• Stipple Sponge


• dark red blush

• ash powder


BASIC ABRASION



S-Z

145

WOUND DEHISCENCEINSTRUCTIONS:

1. Craft two oblong flesh-colored skin pieces, making one slightly smaller than the other, and let dry.

2. Build a few pink tinted fat strands using a mixture of blood and flesh GelEfects®.

3. Let the strands completely dry.

4. Cut small strips of blood and flesh GelEfects® and place it in a plastic applicator bottle or syringe.

5. Put the applicator/syringe in a hot pot and melt to a honey-like consistency.

6. Leave the applicator/syringe in the pot until ready for use.

7. Stretch out the cotton ball(s) to form dehiscence shape desired.

8. Cover completely with the pink colored GelEfects® from the applicator/syringe.

9. When fully dry, put a few drops of GelEfects® on the bottom (smaller) skin piece and attach the cotton mixture.


INSTRUCTIONS:






INGREDIENTS:

• Stipple Sponge


• dark red blush

• ash powder


BASIC ABRASION



(Continued)

S-Z

146

WOUND DEHISCENCEINSTRUCTIONS:


INSTRUCTIONS:






INGREDIENTS:

• Stipple Sponge


• dark red blush

• ash powder


BASIC ABRASION


10. Layer the tinted fat pieces around dehiscence and use melted GelEfects® to attach to the base skin piece.

11. Put a few smaller fat pieces on top of the cotton mixture for effect

12. Make a small slit in the top (larger) skin piece as shown in the picture. (The skin piece will stretch when placing over the smaller piece so be careful not to cut the slit too large.)

13. Manipulate the cut piece so that fat is bulging through the wound — cutting away excess if necessary.

14. Use a syringe filled with GelEfects® to close wound margins and assure the pieces are all attached if desired.

15. Once fully dried and pliable, turn wound over to fill in any holes or weak spots on base piece.

16. Take a suture and run through skin margins to create an unraveling effect.

(Continued)

S-Z

A-F BLOOD DRIPS USING GELEFECTS BASIC ABRASION• black eye shadow INSTRUCTIONS: 1. Apply a little...

Documents

Transcript of A-F BLOOD DRIPS USING GELEFECTS BASIC ABRASION• black eye shadow INSTRUCTIONS: 1. Apply a little...