A clay block home for quality living. · A clay block home for quality living. ... The interplay...

A clay block home for quality living.

ThermoPlan® TP 240High strength for partitions,cavity walls and as a singleleaf external wall for garages and outbuildings.

ThermoPlan® TP 175High strength for partitions,separating walls and cavitywalls. Available in 175 mm,140 mm and 100 mm.

ThermoPlan® S75 Top thermal performancein a single leaf external wall.λR= 0,075 W/(mK) (Passive House)

ThermoPlan® TS12Higher strength block formulti-storey buildings.λR= 0,12 W/(mK)

ThermoPlan® S8High thermal efficiencyin a single leaf external wall.λR= 0,08 W/(mK) (Low Energy House)

www.juwo-poroton.comJUWÖ Poroton-Werke Ernst Jungk & Sohn GmbH · 55597 Wöllstein · Germany · Tel. +49 6703 910 0 · E-Mail [email protected]

www.facebook.com/JuwoePoroton

Low energy house with view on the Cliffs of Moher Inisheer, Aran Islands, Co. Galway, Ireland

JUWOE_AD-GB_190x260_DRUCKFREIGABE.indd 1 8/26/2016 2:45:28 PM

152

JUWO

Belfast: 028 9038 4745Cork: 021 452 0202Dublin: 01 401 0222

www.sigca.iee. [email protected]

4

Indoor comfort in summer and winterA comfortable indoor climate is characterised by:

• a pleasant room temperature throughout the year• ideal relative humidity• dry walls• healthy room air.

The outstanding thermal insulation properties and high heat reten-tion of JUWO POROTON Blocks provide a pleasant room climate. In a JUWO POROTON Block house, it’s always warm and cosy. The interplay between insulation and heat retention in monolithic masonry walls is unique.

A hot topic!! Cool in the summer: JUWO POROTON Blocks have the unique combination of a high thermal insulation and a high thermal mass. This natural air conditioning keeps the temperature in the house relatively constant and makes sure it isn’t too hot inside in the summer. No other building material can do this.

Compared with light wood structures, the advantage is real. The fact is that given the same thermal insulation, a JUWO POROTON Block has much more mass and can hence store more heat or chill.

Lowest moisture content of all comparable building materialsThe more moisture the poorer the thermal insulation. Rule of thumb: For every 1% increase in moisture the thermal insulation decreases by about 10%. JUWO POROTON Blocks are dried and then fired.

They have the fastest drying time and the lowest residual moisture content of all comparable building materials, which have drying times of up to three years and longer. This means that JUWO POROTON Blocks provide thermal insulation right from the start.

Saves money from the first day onHighly insulating JUWO POROTON Blocks really save money. Don’t be fooled by apparently cheaper building materials.

• Because the JUWO POROTON Block is dry and cannot shrink, the wall can be rendered or plastered without a long delay.

• Dry JUWO POROTON Blocks are thermally insulating rightfrom the start. This drastically cuts heating costs.

• Upkeep costs due to mould can practically be ruled out.

• Due to the dimensional stability of the JUWO POROTONBlocks and in connection with the recommended rendersand plasters, the risk of subsequent cracking is significantlyreduced.

Ecological leader• Ecological and sustainable building – ideally monolithic (plaster

inside, JUWO POROTON Block, render outside – done).

• Monolithic masonry façades without artificial insulation systems are free from harmful biocides (treatment with biocides to in-hibit fungal and algal growth is problematic in ETICS systems).

• External thermal insulation composite systems are moresusceptible to fungal and algal attack than rendered mono-lithic walls and have limited service lives (max. 30 to 40years). After that the façade must be disposed of as haz-ardous waste. This is not only absurd from an ecologicalpoint of view, but it is also very expensive. The insulationmania will cause huge ecological problems in the future!

• The rubble from a JUWO POROTON Block house can bereused as recycled building materials.

• Production in the most modern facilities in Germany (buildingwas funded by German Federal Environment Ministry).

• Institut Fresenius confirms: JUWO clay can even be used formedicinal purposes.

Why should I build a JUWO POROTON Block house?

• JUWO has been certified to Öko-Label III by Institut Bauenund Umwelt e.V. This openly presents all JUWO POROTONBlock data – from raw materials extraction through produc-tion to recycling – and creates transparency and comparabilityin the market.

Excellent thermal insulation – constant indoor climateThe outstanding thermal protection of your house (right from the start) is guaranteed by:

• solid and dry JUWO POROTON Blockconstruction

• continuous innovations in highly insulating JUWO POROTONBlocks.

JUWO POROTON Blocks meet current and future requirements for maximum thermal insulation.

Info! The actual thermal insulation is even higher:The JUWO POROTON Blocks are relatively heavy due to their high bulk density and store the sun’s energy longer than all other building materials, thereby saving additional heat energy. This effect was scientifically proven, for example, by Prof. Fehrenberg through examination of two rental properties with JUWO POROTON Block walls: one received additional insulation and the other did not. Before this, the heating costs had been nearly identical for both buildings. Afterwards, they were about 13% higher every year for the modernised building than for the unrenovated building. Why? The clay JUWO POROTON Blocks store the energy from the sun to prevent loss of heat energy. This effect is cancelled out by the additional external insulation. (Source: Welt am Sonntag)

Extremely high compressive strengthsThrough the special Wöllstein clay and a special production meth-od, even the most highly insulating JUWO POROTON Blocks have extremely high compressive strengths. A few examples from pro-duction:

For internal walls and insulated external walls:TP 240/175 TS²: to 20 N/mm². The TS² Quadrat precision-ground JUWO POROTON Block is hence the strongest in the world.For external walls: ThermoPlan® T and S series highly insulating JUWO POROTON Blocks: to 16 N/mm².

These values correspond to the German compressive strength classes 10–16. This puts JUWO above the JUWO POROTON Block manufacturing crowd. This is especially true for the top

heat-insulating stones of the non-JUWO POROTON Block com-petition. Here, a maximum compressive strength class of 2 is attained. JUWO POROTON Blocks are many times stronger.

Did you know?14 N/mm² corresponds to a load of more than 130 tonnes; i.e. a highly insulating ThermoPlan® S9 bears the load of more than three fully laden 40-ton trucks including trailers. Of course, most buildings do not need this kind of compressive strength. However, it is helpful for numerous structural details and provides a sense of security.

Minimum upkeep costs and maximum value retentionLifespan of 100 years – guaranteed appreciation in value. A house built of JUWO POROTON Blocks requires hardly any maintenance for decades, making the cost of upkeep very low. A JUWO PORO-TON Block house is also a safe investment you can actually use and enjoy right now – not virtually, abstractly or even never.

Effective acoustic insulationA heavy JUWO POROTON Block wall is extremely soundproof.

Maximum fire protectionA JUWO POROTON Block house provides maximum fire protec-tion and safety through:

• non-flammable JUWO POROTON Blocks• solid construction• long resistance times• no toxic fumes

Universal applicabilityJUWO POROTON Blocks can be used universally and flexibly for building everything from detached houses to multi-storey buildings.

TOPFAVORIET in de klimaatbescherming

153

JUW

O



• JUWO has been certified to Öko-Label III by Institut Bauenund Umwelt e.V. This openly presents all JUWO POROTONBlock data – from raw materials extraction through produc-tion to recycling – and creates transparency and comparabilityin the market.

Excellent thermal insulation – constant indoor climateThe outstanding thermal protection of your house (right from the start) is guaranteed by:

• solid and dry JUWO POROTON Blockconstruction

• continuous innovations in highly insulating JUWO POROTONBlocks.

JUWO POROTON Blocks meet current and future requirements for maximum thermal insulation.

Info! The actual thermal insulation is even higher:The JUWO POROTON Blocks are relatively heavy due to their high bulk density and store the sun’s energy longer than all other building materials, thereby saving additional heat energy. This effect was scientifically proven, for example, by Prof. Fehrenberg through examination of two rental properties with JUWO POROTON Block walls: one received additional insulation and the other did not. Before this, the heating costs had been nearly identical for both buildings. Afterwards, they were about 13% higher every year for the modernised building than for the unrenovated building. Why? The clay JUWO POROTON Blocks store the energy from the sun to prevent loss of heat energy. This effect is cancelled out by the additional external insulation. (Source: Welt am Sonntag)

Extremely high compressive strengthsThrough the special Wöllstein clay and a special production meth-od, even the most highly insulating JUWO POROTON Blocks have extremely high compressive strengths. A few examples from pro-duction:

For internal walls and insulated external walls:TP 240/175 TS²: to 20 N/mm². The TS² Quadrat precision-ground JUWO POROTON Block is hence the strongest in the world.For external walls: ThermoPlan® T and S series highly insulating JUWO POROTON Blocks: to 16 N/mm².

These values correspond to the German compressive strength classes 10–16. This puts JUWO above the JUWO POROTON Block manufacturing crowd. This is especially true for the top

heat-insulating stones of the non-JUWO POROTON Block com-petition. Here, a maximum compressive strength class of 2 is attained. JUWO POROTON Blocks are many times stronger.

Did you know?14 N/mm² corresponds to a load of more than 130 tonnes; i.e. a highly insulating ThermoPlan® S9 bears the load of more than three fully laden 40-ton trucks including trailers. Of course, most buildings do not need this kind of compressive strength. However, it is helpful for numerous structural details and provides a sense of security.

Minimum upkeep costs and maximum value retentionLifespan of 100 years – guaranteed appreciation in value. A house built of JUWO POROTON Blocks requires hardly any maintenance for decades, making the cost of upkeep very low. A JUWO PORO-TON Block house is also a safe investment you can actually use and enjoy right now – not virtually, abstractly or even never.

Effective acoustic insulationA heavy JUWO POROTON Block wall is extremely soundproof.

Maximum fire protectionA JUWO POROTON Block house provides maximum fire protec-tion and safety through:

• non-flammable JUWO POROTON Blocks• solid construction• long resistance times• no toxic fumes

Universal applicabilityJUWO POROTON Blocks can be used universally and flexibly for building everything from detached houses to multi-storey buildings.

TOPFAVORIET in de klimaatbescherming

154

JUWO



12

S9ThermoPlan

The original, but even better. Everything else is a copy!

• Economical thermal insulation

• No additional insulating layers

• Natural, ecological, sustainable

• Dry from the very beginning

• Perfect handling with minimal upkeep costs

• Good thermal insulation from pure ceramics – The Original and now even

better! The unique Wöllstein clay combined with the latest production

technology makes it possible:

The ThermoPlan S9® – the all-ceramic JUWO POROTON Block with a very

high thermal conductivity of 0.09 W/(mK) with no additional insulating

materials. Now with many optimised features.

• Considerably improved quality, even better heat retention, even higher

compressive strength, enhanced acoustic insulation.

ThermoPlan S9®

Block for block, 100% satisfaction.

The ThermoPlan S9®

The Original

• Good thermal insulation at a high

bulk density

• Extremely high compressive strength

• Controlled quality

• 100% Ceramic clay

13

ThermoPlan® S make-up Blocks End, corner and levelling Blocks

Thermal conductivity λR = 0.10 W/(mK) Starting and end JUWO POROTON Blocks with single-sided cross joint (vertical joint) interlockingBulk density 0.60 - 0.65 kg/dm3

Compressive strength 10 N/mm² Levelling JUWO POROTON Blocks with two-sided cross joint interlocking

For use with all ThermoPlan S series JUWO POROTON Blocks (S7.5–S9)

Item No Item Dimensions in mmLength x Width x Height

kg/unit Units/pallet Description

F-0319 P-End 300 S 124 300 249 6.1 108 End Blocks

F-0318 P-Eck 317 S 175 300 249 8.5 90 Corner Block

F-0315 TP 300/2 S 248 300 124 6.0 144 Levelling Blocks


F-0316 P-End 365 S lang 248 365 249 14.1 60 End Blocks


H-0262 P-End 425 S 124 425 249 8.2 42 End Blocks

F-0320 TP 425/2 S 248 425 249 8.0 96 Levelling Blocks Leve

lling

Blo

cks

alw

ays

in th

e lo

wes

t cou

rse

ThermoPlan® T11 (Range of applications: detached, semi-detached and terraced houses)

Thermal conductivity λR = 0.11 W/(mK) λR = 0.11 W/(mK) Bulk density 0.70 kg/dm3 *0.60 kg/dm3 / **0.65 kg/dm3

Compressive strength 10 10

Fireresistanceclass F30A,≥36.5cm=F90A F30AApproval notice Z-17.1-1047 Z-17.1-769


kg/unit Units/pallet Units perm² m³

m²/pallet

F-0159* TP 190/11 248 190 249 6.8 120 16 84 7.50

F-0152** TP 240/11 248 240 249 8.5 96 16 67 6.00

F-0150 TP 300/11 248 300 249 12.5 72 16 53 4.50

F-0151 TP 365/11 248 365 249 15.2 60 16 44 3.75


Thermal conductivity λR = 0.10 W/(mK)Bulk density 0.65* / 0.70 kg/dm3

Compressive strength 10 N/mm²

Fireresistanceclass F30A,≥36.5cmF90AApproval notice Z-17.1-1047



m²/pallet

F-0162 TP 300/10* 248 300 249 11.4 72 16 53 4.50

F-0163 TP 365/10 248 365 249 13.8 60 16 44 3.75

The ThermoPlan® and T and TS-Series. Blocks for all requirements. Top-quality, high compressive strenght, Efficient.

155

JUW

O



12

S9ThermoPlan

The original, but even better. Everything else is a copy!

• Economical thermal insulation

• No additional insulating layers

• Natural, ecological, sustainable

• Dry from the very beginning

• Perfect handling with minimal upkeep costs

• Good thermal insulation from pure ceramics – The Original and now even

better! The unique Wöllstein clay combined with the latest production

technology makes it possible:

The ThermoPlan S9® – the all-ceramic JUWO POROTON Block with a very

high thermal conductivity of 0.09 W/(mK) with no additional insulating

materials. Now with many optimised features.

• Considerably improved quality, even better heat retention, even higher

compressive strength, enhanced acoustic insulation.

ThermoPlan S9®

Block for block, 100% satisfaction.

The ThermoPlan S9®

The Original

• Good thermal insulation at a high

bulk density

• Extremely high compressive strength

• Controlled quality

• 100% Ceramic clay

13















lling

Blo

cks

alw

ays

in th

e lo

wes

t cou

rse







m²/pallet

F-0159* TP 190/11 248 190 249 6.8 120 16 84 7.50

F-0152** TP 240/11 248 240 249 8.5 96 16 67 6.00

F-0150 TP 300/11 248 300 249 12.5 72 16 53 4.50

F-0151 TP 365/11 248 365 249 15.2 60 16 44 3.75







m²/pallet

F-0162 TP 300/10* 248 300 249 11.4 72 16 53 4.50

F-0163 TP 365/10 248 365 249 13.8 60 16 44 3.75


156

JUWO



14

ThermoPlan® TS12 (Higher strength block for multi-storey buildings)

Thermal conductivity λR = 0.12 W/(mK) Acoustic insulation according to test certificateBulk density 0.75 kg/dm3 TS 300/12 = 47 dBCompressive strength 12 N/mm² TS 365/12 = 50 dB

Fire resistance class F 30 A, 36.5 = fire wall Working with the VD systemApproval notice Z-17.1-1107 Approved for all seismic hazard zones.



m²/pallet

F-0202 TS 300/12 248 300 249 13.4 72 16 53 4.50

F-0203 TS 365/12 248 365 249 16.4 60 16 44 3.75

13















lling

Blo

cks

alw

ays

in th

e lo

wes

t cou

rse







m²/pallet

F-0159* TP 190/11 248 190 249 6.8 120 16 84 7.50

F-0152** TP 240/11 248 240 249 8.5 96 16 67 6.00

F-0150 TP 300/11 248 300 249 12.5 72 16 53 4.50

F-0151 TP 365/11 248 365 249 15.2 60 16 44 3.75







m²/pallet

F-0162 TP 300/10* 248 300 249 11.4 72 16 53 4.50

F-0163 TP 365/10 248 365 249 13.8 60 16 44 3.75


157

JUW

O



14

ThermoPlan® TS12 (Higher strength block for multi-storey buildings)

Thermal conductivity λR = 0.12 W/(mK) Acoustic insulation according to test certificateBulk density 0.75 kg/dm3 TS 300/12 = 47 dBCompressive strength 12 N/mm² TS 365/12 = 50 dB

Fire resistance class F 30 A, 36.5 = fire wall Working with the VD systemApproval notice Z-17.1-1107 Approved for all seismic hazard zones.



m²/pallet

F-0202 TS 300/12 248 300 249 13.4 72 16 53 4.50

F-0203 TS 365/12 248 365 249 16.4 60 16 44 3.75

13















lling

Blo

cks

alw

ays

in th

e lo

wes

t cou

rse







m²/pallet

F-0159* TP 190/11 248 190 249 6.8 120 16 84 7.50

F-0152** TP 240/11 248 240 249 8.5 96 16 67 6.00

F-0150 TP 300/11 248 300 249 12.5 72 16 53 4.50

F-0151 TP 365/11 248 365 249 15.2 60 16 44 3.75







m²/pallet

F-0162 TP 300/10* 248 300 249 11.4 72 16 53 4.50

F-0163 TP 365/10 248 365 249 13.8 60 16 44 3.75


158

JUWO



Leve

lling

Blo

cks

alw

ays

in th

e lo

wes

t cou

rse

T and TS Square Blocks(High strength for partitions, separating walls, cavity walls and as a single leaf external wall for garages and outbuildings)

Thermal conductivity λR = 0.28 W/(mK)Bulk density 0.80 kg/dm3


Fireresistanceclass ≥11.5cmF90A,≥17.5cmfirewallREI-M90Approval notice Z-17.1-1037



m²/pallet

F-0218 TP 100 498 100 249 8.8 96 8 80 12.00

F-0219 TP 115 498 115 249 10.1 96 8 70 12.00

F-0232 TP 514 498 140 249 12,6 84 8 57 10.50

F-0225 TP 175 498 175 249 15.4 60 8 44 7.50

F-0223 TP 240 308 240 249 13.1 72 13 53 5.50

19

Apply the mortar layer. The mortar roller covers the entire bed joint surface in one pass with thin layer mortar.

Lay the JUWO POROTON Blocks and align. You’re done!

VD System for a full surface thin layer mortar joint

Stir the mortar in a clean 30l bucket with a double-blade mixing tool (Collomix DLX 150) until it attains a smooth consistency. Mixing time: Mix for 3 minutes, let the mortar sit and then stir again.

Fill the mortar roller. Slide the mortar roller over the JUWO POROTON Blocks, pressing down on both rollers.

• Cover the bed joint in just one pass.

• Faster and more efficient mortar application with the VD roller.

• Vertical air channels in the wall are avoided.

• Wall ties can easily be fixed.

Building with ThermoPlan® JUWO POROTON Blocks and the VD system is easy: Roll, lay, finished!Acoustic insulation, draught-proofing and thermal insulation are optimised in the VD system!

159

JUW

O



Leve

lling

Blo

cks

alw

ays

in th

e lo

wes

t cou

rse

T and TS Square Blocks(High strength for partitions, separating walls, cavity walls and as a single leaf external wall for garages and outbuildings)

Thermal conductivity λR = 0.28 W/(mK)Bulk density 0.80 kg/dm3


Fireresistanceclass ≥11.5cmF90A,≥17.5cmfirewallREI-M90Approval notice Z-17.1-1037



m²/pallet

F-0218 TP 100 498 100 249 8.8 96 8 80 12.00

F-0219 TP 115 498 115 249 10.1 96 8 70 12.00

F-0232 TP 514 498 140 249 12,6 84 8 57 10.50

F-0225 TP 175 498 175 249 15.4 60 8 44 7.50

F-0223 TP 240 308 240 249 13.1 72 13 53 5.50

19

Apply the mortar layer. The mortar roller covers the entire bed joint surface in one pass with thin layer mortar.

Lay the JUWO POROTON Blocks and align. You’re done!

VD System for a full surface thin layer mortar joint

Stir the mortar in a clean 30l bucket with a double-blade mixing tool (Collomix DLX 150) until it attains a smooth consistency. Mixing time: Mix for 3 minutes, let the mortar sit and then stir again.

Fill the mortar roller. Slide the mortar roller over the JUWO POROTON Blocks, pressing down on both rollers.

• Cover the bed joint in just one pass.

• Faster and more efficient mortar application with the VD roller.

• Vertical air channels in the wall are avoided.

• Wall ties can easily be fixed.

Building with ThermoPlan® JUWO POROTON Blocks and the VD system is easy: Roll, lay, finished!Acoustic insulation, draught-proofing and thermal insulation are optimised in the VD system!

160

JUWO



Projects A County Galway home on the island of Inis Óirr. The beautiful build is spread out over two stories and offers breathtaking views of the ocean and the Cliffs of Moher. The home is made up of poroton monolithic clay blocks from Juwo.

Apartment Block in Germany

COMMERCIAL ROOFLINE

COMMERCIAL hygIENIc cLADDINg

COMMERCIAL wALL pANELs

The system incorporates a range of fascia/reveal liners, full replacement and New Build fascia, as well as hollow and solid soffit, with full portfolio of accompanying trims and ventilation products.

COMPOSITION AND MANUFACTURE HHI products are 100% lead-free and manufactured using an advanced environmentally friendly formulation for long life colour and maximum performance. The two-part co-extrusion process yields boards made of a cellular foam core (PVC-UE) with a top coating of rigid PVC to give its smooth, protective and hardwearing skin. The material is lightweight and can be worked in the same way as timber, having similar regard for safety and application issues.

Our cladding is a tough, durable and easily cleaned PVCu system providing the ideal solution to wall, ceiling and door finishes where hygiene is of paramount importance. The cladding is manufactured from the highest quality PVCu and is available in a wide range of colours.

The system has proven to be low maintenance, with the smooth scratch resistant surfaces making it easy to clean, which is an important factor for the many facilities it is installed in.

MAINTENANCE FREE UlTRA PANElSUltra Panel interior cladding is both functional and decorative. Available in 15 carefully selected colours and designs. It is manufactured from tough, recycled high quality PVCu and incorporates a hollow, fluted centre to provide added insulation.

This will help to reduce condensation and therefore inhibit mould growth. The panels can be installed vertically and horizontally.HHI provide a full Supply only service.

UlTRA PANEl PlUSUltra Panel Plus interior cladding is a waterproof system used primarily in bathroom and shower room applications. Available in 37 carefully selected colours and designs.

The panels can be installed using timber battens or applied directly to wall using Ultra Panel Wall Adhesive. There is a range of aluminium profiles permitting fast and easy installation. The precisely engineered Hydro-Lock tongue and groove joint allows a tight joint to be created between panels. Water tightness is achieved using Ultra Panel Adhesive in the joints.

Technical: Ultra Panel Plus• 9mm WBP plywood core• Bonded decorative face and white balancer high pressure laminate• 2400 x 1200 x 11mm available from stock• Cut to any size

PVCu extruded sheets are supplied with a protective film on its face which can be left in place until the room is ready for use. It is ideal for applications requiring a hygienic easy-to-clean, almost maintenance free wall finish, which conforms to all hygiene requirements.

DescriptionExtruded semi-rigid PVCu sheet.

Colour: Various available

Surface finish: Satin or Gloss

Thickness: 2.5mm

Size: 2500 x 1220mm

3000 x 1220mm

Weight: 3.5 kg per m2

Maximum service temp: 60°C

HHI Unit 3, Robinhood Industrial Estate, Robinhood Road, Ballymount, Dublin 22 (Opposite Musgrave Cash & Carry)

T: 01 460 4610

DUBLIN | BELFAST | BANGOR | COLERAINE

NEWTOWNABBEY | LISBURN

BUILDING PRODUCTS

www.hhi-ireland.comfull range of products on our new website

2055_commercial_hhi_a4_advert.indd 1 30/08/2016 11:09

COMMERCIAL ROOFLINE

COMMERCIAL hygIENIc cLADDINg

COMMERCIAL wALL pANELs

The system incorporates a range of fascia/reveal liners, full replacement and New Build fascia, as well as hollow and solid soffit, with full portfolio of accompanying trims and ventilation products.

COMPOSITION AND MANUFACTURE HHI products are 100% lead-free and manufactured using an advanced environmentally friendly formulation for long life colour and maximum performance. The two-part co-extrusion process yields boards made of a cellular foam core (PVC-UE) with a top coating of rigid PVC to give its smooth, protective and hardwearing skin. The material is lightweight and can be worked in the same way as timber, having similar regard for safety and application issues.

Our cladding is a tough, durable and easily cleaned PVCu system providing the ideal solution to wall, ceiling and door finishes where hygiene is of paramount importance. The cladding is manufactured from the highest quality PVCu and is available in a wide range of colours.

The system has proven to be low maintenance, with the smooth scratch resistant surfaces making it easy to clean, which is an important factor for the many facilities it is installed in.

MAINTENANCE FREE UlTRA PANElSUltra Panel interior cladding is both functional and decorative. Available in 15 carefully selected colours and designs. It is manufactured from tough, recycled high quality PVCu and incorporates a hollow, fluted centre to provide added insulation.

This will help to reduce condensation and therefore inhibit mould growth. The panels can be installed vertically and horizontally.HHI provide a full Supply only service.

UlTRA PANEl PlUSUltra Panel Plus interior cladding is a waterproof system used primarily in bathroom and shower room applications. Available in 37 carefully selected colours and designs.

The panels can be installed using timber battens or applied directly to wall using Ultra Panel Wall Adhesive. There is a range of aluminium profiles permitting fast and easy installation. The precisely engineered Hydro-Lock tongue and groove joint allows a tight joint to be created between panels. Water tightness is achieved using Ultra Panel Adhesive in the joints.

Technical: Ultra Panel Plus• 9mm WBP plywood core• Bonded decorative face and white balancer high pressure laminate• 2400 x 1200 x 11mm available from stock• Cut to any size

PVCu extruded sheets are supplied with a protective film on its face which can be left in place until the room is ready for use. It is ideal for applications requiring a hygienic easy-to-clean, almost maintenance free wall finish, which conforms to all hygiene requirements.

DescriptionExtruded semi-rigid PVCu sheet.

Colour: Various available

Surface finish: Satin or Gloss

Thickness: 2.5mm

Size: 2500 x 1220mm

3000 x 1220mm

Weight: 3.5 kg per m2

Maximum service temp: 60°C

HHI Unit 3, Robinhood Industrial Estate, Robinhood Road, Ballymount, Dublin 22 (Opposite Musgrave Cash & Carry)

T: 01 460 4610

DUBLIN | BELFAST | BANGOR | COLERAINE

NEWTOWNABBEY | LISBURN

BUILDING PRODUCTS

www.hhi-ireland.comfull range of products on our new website

2055_commercial_hhi_a4_advert.indd 1 30/08/2016 11:09

162

JUWO



NOTES / CALCULATIONS

163

USEF

UL C

ONVE

RSIO

N CH

ARTS

Belfast: 028 9038 4745Corkt: 021 452 0202Dublin: 01 401 0222


LENGTHTo Convert Multiply By

Inches to Centimetres 2.540Centimetres to Inches 0.397

Feet to Metres 0.3048Metres to Feet 3.281Yards to Metres 0.9144Metres to Yards 1.094

Miles to Kilometres 1.609Kilometres to Miles 0.6214

AREATo Convert Multiply By

Square Inches to Square Centimetres 6.452Square Centimetres to Square Inches 0.1550

Square Metres to Square Feet 10.76Square Feet to Square Metres 0.0929Square Yards to Square Metres 0.8361Square Metres to Square Yards 1.196

Square Miles to Square Kilometres 2.590Square Kilometres to Square Miles 0.3861

Acres to Hectares 0.4047Hectares to Acres 2.471

VOLUMETo Convert Multiply By

Cubic Inches to Cubic Centimetres 16.39Cubic Centimetres to Cubic Inches 0.06102

Cubic Feet to Cubic Metres 0.02832Cubic Metres to Cubic Feet 35.31Cubic Yards to Cubic Metres 0.7646Cubic Metres to Cubic Yards 1.308

Cubic Inches to Litres 0.01639Litres to Cubic Inches 61.03

Gallons to Litres 4.546Litres to Gallons 0.22

LENGTH EQUIVALENTS (METRIC TO IMPERIAL)

Metric (mm) Approx Imperial (Feet – Inches)

1225 4 - 01375 4 - 61525 5 - 01600 5 - 31675 5 - 61750 5 - 91825 6 - 01875 6 - 21975 6 - 62025 6 - 92125 7 - 02175 7 - 22275 7 - 62350 7 - 92425 8 - 02600 8 - 62750 9 - 02825 9 - 32900 9 - 62975 9 - 93050 10 - 0

To Convert Multiply By

Grains to Grams 0.0648Grams to Grains 15.43Ounces to Grams 28.35Grams to Ounces 0.03527Pounds to Grams 453.6Grams to Pounds 0.002205

Pounds to Kilograms

0.4536

Kilograms to Pounds

2.205

Tons to Kilograms 1016.00Kilograms to Tons 0.000984

164

USEFUL CONVERSION CHARTS

Belfast: 028 9038 4745Corkt: 021 452 0202Dublin: 01 401 0222


FAHRENHEIT TOCELSIUS, AND VICE VERSA:

F° C°

32 040 550 1060 1570 2075 2585 30

105 40140 60175 80

SEALANT ESTIMATING GUIDETo calculate the number of litres required use the following calculation.Joint width (mm) x joint depth x joint length (m) = litres required 1000

TYPICAL SEALANT COVERAGESizes (ml) Coverage*

Joint size (mm) Litre/metre run Metre run per cartridge

380 Cartridges 5 x 5 0.025 15.210 x 10 0.1 3.815 x 10 0.15 2.515 x 15 0.23 1.620 x 15 0.3 1.220 x 20 0.4 0.95

*These are theoretical yields, no allowance has been made for variation in joint dimensions or wastage.

A clay block home for quality living. · A clay block home for quality living. ... The interplay...

Documents

Transcript of A clay block home for quality living. · A clay block home for quality living. ... The interplay...