MBL › Admin › Public › DWSDownload.aspx?File... · [email protected] About MBL The MBL Group...
Transcript of MBL › Admin › Public › DWSDownload.aspx?File... · [email protected] About MBL The MBL Group...
MBL MOTIONSOLUTIONS
TILT/LIFT SYSTEMLIFT SYSTEMTILT SYSTEM
LINEAR ACTUATORS
QUALITY IS IN THE DETAIL.
content
TILT/LIFT systemTILT systemLIFT systemLinear actuator Q101Linear actuator U101Linear actuator T100Other products for powered wheelchairs
page
68
1012141618
4
555555
Our universal and compact Tilt/Lift, Lift and Tilt systems have optimal measurements and specifications to be built into powered wheelchairs.
The systems comply with the market’s standard control systems.
MBL MOTION SYSTEMS
TILT/LIFTThe MBL Tilt & Lift System is a universal, combined and compact tilting and lifting unit. It supports up to 220 kg load with 88 mm build in height where the lifting range is 300 mm and the tilting angle is up to 55°. Our standard configuration realizes 300 mm lift and several tilt angles of 30°, 45°, 50° and 55°. The unit includes standard build in actuators equipped with internal limit switches. As an option they can be configured with adjustable inhibit switch and/or analogue feedback for positioning. It is also possible to use different cable tracks.
6September 2018 copyright MBL
777
Load capacity:
Minimal install height:
Max lift stroke:
Max tilt angle:
Unit weight:
Power supply:
Current consumption (full load):
Feedback:
Switches:
IP-class:
Connection:
Cable routing:
200 (55°) - 220 kg (30°-50°)
88 mm
300 mm
30° - 55°
< 30kg
24V DC
4 (+/-0,5) A
Optional analogue potentiometer
Inbuilt at actuator, optional inhibit switch
IP21
2 x 200 mm cable with female Molex plug 39-01-2025
Optional cable track
355130
100
266
266
300
8833
0
55
Center of Load
500(without cover)
FEATURES
777September 2018 copyright MBL
DIMENSIONS
TILTThe MBL Tilt System is a universal and compact tilting unit with configurable tilting angles from 30° to 55°. The load capacity depends of the design tilt angle and can vary from 200 kg (55°) to 250 kg (30°) and maintain an 76 mm build in height. Our standard configuration realizes tilt angles of 30°, 45°, 50° and 55° with a maximum load capacity of 200 kg. The system includes a standard build in actuator equipped with internal limit switches. As an option it can be configured with adjustable inhibit switch and analogue feedback for positioning.
8September 2018 copyright MBL
200 kg (55°), 220 kg (50° ,45°), 250 kg (30°)
76 mm -78 mm
30°, 45°, 50° or 55°
13 kg
24V DC
4 (+/-0,5) A
Optional analogue potentiometer
Inbuilt at actuator, optional inhibit switch
IP21
200 mm cable with female Molex plug 39-01-2025
Load capacity:
Minimal install height:
Max tilt angle:
Unit weight:
Power supply:
Current consumption (full load):
Feedback:
Switches:
IP-class:
Connection:
69
280
387
55
478 (with cover 483mm) 266
78
Center of Load
FEATURES
999
DIMENSIONS
September 2018 copyright MBL
LIFTThe MBL Lift System is a universal and compact lifting unit. It supports 220 kg of load with 77,5 mm build in height. Our standard configuration realizes 300 mm lift and includes a standard build in actuator equipped with internal limit switches. As an option it can be configured with adjustable inhibit switch and/or analogue feedback for positioning. It is also possible to use different cable tracks.
10September 2018 copyright MBL
Load capacity:
Minimal install height:
Max lift stroke:
Unit weight:
Power supply:
Current consumption (full load):
Feedback:
Switches:
IP-class:
Connection:
Cable routing:
220 kg
77,5 mm
300 mm
16 kg
24V DC
4 (+/-0,5) A
Optional analogue potentiometer
Inbuilt at actuator, optional inhibit switch
IP21
200 mm cable with female Molex plug 39-01-2025
Optional cable track
280
118
266
300
Center of Load
470 (without cover)488(without cover)
77,5
FEATURES
111111
DIMENSIONS
September 2018 copyright MBL
Q101The Q101 is a very compact yet powerful actuator. It is well suited for all applications where the build-in space is limited such as, seat-lifts, lift-chairs and wheelchair lifting devices. The Q101 is very silent as it contains a high quality Italian engine. The actuator can be controlled by all known 3rd party controllers on the market and it can be equipped with a linear potentiome-ter which allows us to know the precise position of the piston at any time.
12
6000 N
6000 N
3,5 (+/-0,5) mm/s
4 (+/-0,5) mm/s
160 mm + stroke
45 mm
90, 95, 100, 105, 110 or 115
IP21
4 (+/-0,5) A
0,8 (+/-0,5) A
Mechanical limit switch
24V DC permanent magnet motor
10 mm; Angle for piston bracket: 0°-360°
Cable 0,2m 2 x 0,75 mm2 (with Molex plug)
+5° to +40°C
-40° to +70°C
Aluminium
Stainless steel
Black and silver
10%, max. 2 minutes at continuous use followed by an 18 minutes rest
Dynamic force:
Static force:
Max. speed (full load):
Max. speed (no load):
Min. installation dimension:
Min. stroke:
Stroke lengths (mm):
IP-class:
Current consumption (full load):
Current consumption (no load):
Feedback & switches:
Motor:
Mounting brackets:
Connection:
Operating temperature:
Storage temperature:
Housing:
Piston:
Colour:
Duty cycle:
FEATURES
September 2018 copyright MBL
DIMENSIONS
131
,1
10
291 (+/-1)
10
stroke 98 (+/-1)
11
60
22
11
60,3
24
25
24
156,1
11°
72,
3
131
,1
10
291 (+/-1)
10
stroke 98 (+/-1)
11
60
22
11
60,3
24
25
24
156,1
11°
72,
3
PERFORMANCE
Customizable
Customizable
Plastic or steel slide bearings
Angle: 90°, 180° or 270°
Customizable
Adjustable Limit switches/Linear potentiometer
Stroke length:
Cable and connector:
Mounting brackets:
Piston:
Coating colour:
Feedback and switches:
OPTIONS
131313
*Charts show average figures for a 24V actuator using a stabilized power supply.
0,5
1
1,5
2
2,5
3
3,5
4
4,5
0,5
1
1,5
2
2,5
3
3,5
4
4,5
0 1000 2000 3000 4000 5000 6000
Force (N)
Speed (mm/s) Current (amp)
The chart shows the average figures for a 24V actuator using a stabilized power suply
September 2018 copyright MBL
U101The U101 is a powerful yet silent actuator. The design is compact which makes it optimal for constructions where space is limited - for example in powered wheelchair applications. The aluminium construction makes it very light. This actuator is high self-locking load.
14
4000 N
4000 N
4 (+/-0,5) mm/s
4,5 (+/-0,5) mm/s
135 mm + stroke
45 mm
80 mm, 85 mm, 90 mm, 95 mm
IP21
3,5 (+/-0,5) A
1,5 (+/-0,5) A
Mechanical limit switch
24V DC permanent magnet motor.
10 mm; Angle for piston bracket: 0°-360°
Cable 0,2m 2x0,75mm2 (with Molex plug)
+5° to +40°C
-40° to +70°C
Aluminium
Stainless steel
Black and silver
High self-locking load
10%, max. 2 minutes at continuous use followed by an 18 minutes rest
Dynamic force:
Static force:
Max. speed (full load):
Max. speed (no load):
Min. installation dimension:
Min. stroke:
Stroke lengths (mm):
IP-class:
Current consumption (full load):
Current consumption (no load):
Feedback & switches:
Motor:
Mounting brackets:
Connection:
Operating temperature:
Storage temperature:
Housing:
Piston:
Standard colour:
Self-locking:
Duty cycle:
FEATURES
September 2018 copyright MBL
160
10
68
37
43
22
231(+/-1)
stroke 93 (+/-1)
22
10
84
11 31
11
24 160
10
68
37
43
22
231(+/-1)
stroke 93 (+/-1)
22
10
84
11 31
11
24
DIMENSIONS
PERFORMANCE
Customizable
Customizable
Plastic or steel slide bearings
Customizable
Adjustable Limit switches / Linear potentiometer
Stroke length:
Cable and connector:
Mounting brackets:
Coating colour:
Feedback and switches:
OPTIONS
151515
*Charts show average figures for a 24V actuator using a stabilized power supply.
1
1,5
2
2,5
3
3,5
4
4,5
5
1
1,5
2
2,5
3
3,5
4
4,5
5
0 500 1000 1500 2000 2500 3000 3500 4000Force (N)
Speed (mm/s) Current (amp)
The chart shows the average figures for a 24V actuator using a stabilized power suply
September 2018 copyright MBL
T100The T100 is a powerful inline actuator designed for rehabilitation applications, but it can also be used in other applications demanding the smallest over-all dimensions and linear design. The T100 is very light and compact which makes it perfect for powered leg-rests.
16
1000 N
2000 N
4,0 mm/s
7,5 mm/s
170 mm + stroke
Customizable
IP52
1,2 (+/-0,5) A
0,5 (+/-0,3) A
Switching off by the controller (by current 1,8 A)
24V DC motor with planetary gear
10 mm (motor side) and 8,2 mm (piston side) angle for piston bracket: 0°-360°
Cable 0,2 m 2 x 0,5 mm2 (with Molex plug)
+5° to +40°C
-40° to +70°C
Aluminium
Galvanized steel
Black and silver
Self-locking
10%, max. 2 minutes at continuous use followed by an 18 minutes rest
Dynamic force
Static force
Max speed (full load)
Max speed (no load)
Min installation dimension
Stroke lengths (mm)
IP-class
Current consumption (full load)
Current consumption (no load)
Feedback & switches
Motor
Mounting brackets
Connection
Operating temperature
Storage temperature
Housing
Piston
Standard colour
Self-locking
Duty cycle
STANDARD FEATURES
September 2018 copyright MBL
8,2
29
36,3
112 95
stroke75(+/-1)
10
28
244(+/-1)
8,50
18
8,50 18
DIMENSIONS
PERFORMANCE
Customizable
Customizable
Customizable by changing engine
Customizable by changing engine
Plastic or steel slide bearings
Customizable
Stroke length:
Cable and connector:
Speed:
Push force:
Mounting brackets:
Coating colour:
OPTIONS
171717
1000 N
2000 N
4,0 mm/s
7,5 mm/s
170 mm + stroke
Customizable
IP52
1,2 (+/-0,5) A
0,5 (+/-0,3) A
Switching off by the controller (by current 1,8 A)
24V DC motor with planetary gear
10 mm (motor side) and 8,2 mm (piston side) angle for piston bracket: 0°-360°
Cable 0,2 m 2 x 0,5 mm2 (with Molex plug)
+5° to +40°C
-40° to +70°C
Aluminium
Galvanized steel
Black and silver
Self-locking
10%, max. 2 minutes at continuous use followed by an 18 minutes rest
*Charts show average figures for a 24V actuator using a stabilized power supply.
0
0,5
1
1,5
2
2,5
3
2
3
4
5
6
7
8
0 200 400 600 800 1000
Curr
ent
Spee
d
Force (N)
Speed (mm/s) Current (amp)
The chart shows the average figures for a 24V actuator using a stabilized power suply
September 2018 copyright MBL
WHEELS AND OTHER PRODUCTS FOR POWERED WHEELCHAIRS Please visit our webpage or contact our sales department if you would like to know more about our products and solutions for powered wheelchairs.
200 X 50 2.80/2.50-4 3.00-8
18
PLEASE FIND OUR FULL RANGE OF
PRODUCTS ON MBL.DK
www.mbl.dk
MBL DENMARKMBL a/sGlarmestervej 18 B, St. Th.8600 SilkeborgTel.: +45 86 80 28 00 [email protected]
MBL POLANDMBL Poland Sp. zo. o.Ul. Sulejowska 45d97-300 Piotrkòw TrybunalskiPolandTel.: +48 44 73 24 100 Fax: +48 44 73 24 [email protected]
MBL CHINAMBL (Xiamen) Co. Ltd.No. 289 Wengjiao Road XinyangIndustrial District Haicang361012 XiamenChinaTel.: +86 592 596 1896 Fax: +86 592 596 [email protected]
About MBL
The MBL Group was established in Denmark in 1988. Today, we are a leading supplier of components and customer speci-fied solutions for the wheelchair industry and more than 1,600 people are employed in our 40.000m2 production facilities in Poland and China.
MBL manufactures an extensive range of quality products for the wheelchair industry, including rear wheels, pushrims, front forks, bearing housings, hubs, quick-release axles, foot rests, hand brakes, textiles, rubber tyres, polyurethane tyres and the
unique puncture proof solutions; FlexLite and Flexel® . We also offer a comprehensive range of quality ramps in aluminium.
Our standard products have all been developed through our well defined R&D process. They are tested according to rel-evant industrial standards to ensure they meet all quality and durability requirements, and they are ready for production upon order.
Sep
tem
ber
2018
cop
yrig
ht M
BL
a/s
Your contact at MBL: