· • 1 Set pull handles • 1 Set screws for glass door • 1 Set screws for wooden door...
Transcript of · • 1 Set pull handles • 1 Set screws for glass door • 1 Set screws for wooden door...
Glass Door Fittings2019-2020
ww
w.h
afel
e.co
m.p
h
1
2
5
9
Page
Page
Page
Page
Floor Spring
Patch Fittings
Pull Handles
Profile Cylinder
Floor Spring & Patch Fittings
1
Double Action Floor Spring
Product Specification• Door weight: 90 kg• Closing force size: EN2 - EN3• Cover plate material: Stainless steel Grade 304• Cover plate finish: Satin stainless steel (Matt)• Hold Open: 90 degrees• Maximum Opening Angle: 120 degrees• Durability test: 500,000
Door leaf positioning and adjustment of closing speed• Adjust screws 2, 3 & 4 to allign door parallel to the ground and to the top frame pivot• Adjut screw 1 to allow the door leaf to stop at the intended position• Both closing speed and latching speed decrease when the valves are turned clockwise whereaswhen the valves are turned anti-clockwise, both closing speed and latching speed increase
Functioning• Opening: Double action door• Closing speed: from 120 deg. to 15 deg.• Latching speed: 15 deg. to 0 deg.
Max. Door width Cat. No.950 mm 932.79.260
Door CloserFloor spring
2
Bottom Patch Fittings
Top Patch Fittings
Product SpecificationFeatures• For glass thickness 10-12 mm• Suitable for DIN left hand and DIN right hand• For double action doorsTechnical data• Max. door weight: 80 kg• Max. door leaf width: 1,100 mmInstallation• Clamp fixing, concealed, with hexagon socket screwsSupplied with1 bottom patch fitting for double action door2 allen keys SW 2 and 51 additional gasket for glass thickness 10mm
Features• For glass thickness 10-12 mm• Suitable for DIN left hand and DIN right hand• For double action doorsTechnical data• Max. door weight: 80 kg• Max. door leaf width: 1,100 mm Installation• Clamp fixing, concealed, with hexagon socket screwsSupplied with1 top patch fitting for double action door2 allen keys SW 2 and 51 additional gasket for glass thickness 10mm
Finish Cat. No.Stainless Steel Matt 981.50.010
Finish Cat. No.Stainless Steel Matt 981.50.020
Glass Door FittingsPatch Fittings
3
Glass Door FittingsPatch Fittings
Corner patch lock with PC aperture with double cylinder 60mm
Features• For glass thickness 10-12 mm• Suitable for DIN left hand and DIN right hand• For profile cylinder• Bolt 1-turnTechnical data• Clamp fixing, concealed, with hexagon socket screwsInstallation1 Corner patch lock with PC aperture2 allen keys SW 2 and 51 striking plate with fixing material1 fixing screw for profile cylinder1 additional gasket for glass thickness 10mm
Finish Cat. No.Stainless Steel Matt 981.50.030
Finish Cat. No.Stainless Steel Matt 981.00.080
Top Pivot
4
Features• For glass thickness 10-12 mm• Suitable for DIN left hand and DIN right hand• Counter bearing for top pacth fittingsTechnical data• Pivot laterally adjustable ±3mmInstallation• Clamp fixing, concealed, with hexagon socket screwsSupplied with1 fanlight/side panel pivot patch fitting2 allen keys SW 2 and 51 additional gasket for glass thickness 10mm
Features• For glass thickness 10-12 mm• Suitable for DIN left hand and DIN right handInstallation• Clamp fixing, concealed, with hexagon socket screws-Supplied with1 top patch fitting2 allen keys SW 2 and 51 additional gasket for glass thickness 10mm
Finish Cat. No.Stainless Steel Matt 981.50.010
Finish Cat. No.Stainless Steel Matt 981.50.020
Top Patch Fittings
Fanlight/side panel Patch Fittings
Glass Door FittingsPatch Fittings
Pull Handles
6
Features• For glass, aluminum, and timber doors with back to back fixing• M6 thread• For door thickness 8-50 mmSupplied with:• 1 Pair of pull handles• 1 Fixing set for glass doors• 1 Fixing set for aluminum and timber doors
Features• For glass, aluminum, and timber doors with back to back fixing• M6 thread• For door thickness 8-50 mmSupplied with:• 1 Pair of pull handles• 1 Fixing set for glass doors• 1 Fixing set for aluminum and timber doors
Features• For glass, aluminum, and timber doors with back to back fixing• M6 thread• For door thickness 8-50 mmSupplied with• 1 Pair of pull handles• 1 Fixing set for glass doors• 1 Fixing set for aluminum and timber doors
Stainless steel
Stainless steel
Stainless steel
Packing: 1 pair incl. fixing material
Packing: 1 pair incl. fixing material
Packing: 1 pair incl. fixing material
Dim. A mm Dim. B mm Cat. No.480 450 903.00.070
630 600 903.00.074
1,030 1,000 903.00.078
Dim. A mm Dim. B mm Cat. No.
332 300 903.05.850
482 450 903.05.860
632 600 903.05.870
Door HandlesPull Handles
Dim. A mm Dim. B mm Cat. No.480 450 903.00.170
630 600 903.00.174
1,030 1,000 903.00.178
7
Features• For glass, aluminium or timber door with back to back fixings• Screw M8• For door thickness: 8–50 mm• Glass cut out for fix bolt Ø14 mmSupplied with• 1 Set pull handles• 1 Set screws for glass door• 1 Set screws for wooden door
Stainless steelDim. A mm Dim. B mm Cat. No.
1,200 1,000 903.05.7931,600 1,400 903.05.794
2,000 1,800 903.05.795
Door Handles
Door HandlesPull Handles
8
Profile Cylinder
9
Locking and SecurityProfile Cylinder
Finish Length A Length B Length C Cat No.
Satin Nickel 30 mm 30 mm 60 mm 916.88.10632.5 mm 32.5 mm 65 mm 916.88.116
35 mm 35 mm 70 mm 916.88.126Chrome Polished
32.5 mm 32.5 mm 65 mm 916.88.112
Finish Length A Length B Length C Cat No.
Satin Nickel 32.5 mm 32.5 mm 65 mm 916.88.136
Features• With 5 pin tumblers• Master key on request available• One side lock function• One side oval-shaped thumbturnMaterial:• BrassSupplied with:1 Pc. double profile cylinder with thumbturn3 pcs. keys1 Pc. fastening screwKey changes:• 3,000 different key changes possible
Brass nickel plated
Brass nickel plated
Length A Length B Length C Cat No.
30 mm 30 mm 60 mm 916.95.106
32.5 mm 32.5 mm 65 mm 916.95.116
Features• Master key on request available• With 5 pin tumblersSupplied with:1 Double profile cylinder3 Keys1 Fastening screw
Brass nickel plated
10
Finish Length A Length B Length C Cat No.
Satin Nickel 30 mm 30 mm 60 mm 916.88.10632.5 mm 32.5 mm 65 mm 916.88.116
35 mm 35 mm 70 mm 916.88.126Chrome Polished
32.5 mm 32.5 mm 65 mm 916.88.112
Finish Length A Length B Length C Cat No.
Satin Nickel 32.5 mm 32.5 mm 65 mm 916.88.136
Locking and SecurityProfile Cylinder
Length A Length B Length C Cat No.
30 mm 30 mm 60 mm 916.95.306
32.5 mm 32.5 mm 65 mm 916.95.316
Length A Length B Length C Cat No.
32.5 mm 32.5 mm 65 mm 916.86.951
Features• Master key on request available• With 5 pin tumblers• One side lock function• One side thumbturnSupplied with:1 Double profile cylinder3 Keys1 Fastening screw
Features• High quality cylinder• Solid brass for housing, plug and turn knob• Solid brass pin processed by high precise CNC machine• Double-row-pin (10 pin)• 3 pieces solid brass keys with nickel plating• with hafele logo
Brass nickel plated
Satin nickel
Imprint:
This catalogue is only intended for the use of the recipient.The contents in all aspects remains the property of Häfele.Reproductions of this catalogue in whole or in part, the copying or imitation of any illustrations, and the imitation of the layout are strictly prohibited. The technical descriptions in this catalogue, also those with the photographs and drawings, are not binding.
We reserve the right to make design improvements.All dimensions are in mm, unless stated otherwise.
We bear no liability for any misprints or other errors that might occurin the production of the catalogue.
All delivers are made pursuant to Häfele’s sales conditions.
Copyright by Häfele Philippines Inc.All Rights Reserved 2019Printed in the Philippines