9–13 913 m - SENNEBOGEN · * Option 5 4 No-slip work surfaces 2 cameras to the right and rear...

9–13 m

23.9/25.1 t

Stage V

9 13

23.9/25.1 2 t

90 kW (Electro) 119 kW (Stage IIIa)

123 kW (Stage V)

911

Mobile material handling machine

2

Your top benefits

Safe entry and exit - no-slip stepsState-of-the-art camera - entire work area in view

Maximum safety

Comfortable Maxcab operator cab - relaxed workSENCON - work program selection made easy

Maximum usability

Durable mechanical systems - stressed parts optimizedHigh speeds - high load capacities

Peak performance

Save fuel - reduce operating costsWork quietly - protect operator and environment

Green Efficiency

3 production sites - 2 subsidiariesmore than 130 sales partners - worldwide and also in your area

Consultation and support in your area

SENNEBOGEN Control System SENCON - easy fault diagnosisEasy Maintenance - clear labeling

Maintenance and service made easy

1

2

3

4

5

6

Advanced. The E-Series

1962: rope-driven S833 with elevated operator cab

More than 65 years of experience in designing and constructing hydraulic material handling machines

Uncompromisingly high performance in all areas: Focus on material handling

Technology that can be mastered: High- quality components without over-engineering

Long product service life and high value retention

What makes up the E-Series

4

RPM1800 ECO

RPM0

RPM1400

RPM800

0 s 5 s 8 s 5 min

Work Idle Stop

2 3

2

4

3

The E-Series. At a glance.

Up to 20% savings: working in Eco Mode with reduced engine speed

Idle automation reduces speed to 40% of operating speed

Stop automation switches the engine off when not needed

Optimized settings of engine and hydraulics reduces fuel consumption

Four ways to save fuel

Quiet operation

Consistently quiet operation thanks to decoupled engine mounts and soundproofing in the doors

Soundpower level according to 2000/14/EC up to 2 dB lower than required

High-capacity cooling

Constant, reliable performance thanks to large-dimensioned and robust fans and coolers

Water and oil coolers with top-notch efficiency thanks to axial-piston pump and motor control and on demand thermostatic control

Fan reversal for cleaning in series

Subject to technical changes. Further options available upon request.

5* Option

4

No-slip work surfaces 2 cameras to the right and rear Step grid with railing* next to cab sliding door

Maximum safety

Powerful hydraulic system

Strong pumps with power reserves Top efficiency thanks to large-dimensioned hydraulic valves and lines

Extra-long change intervals of 4,000 opera-ting hours through initial fill-up with special oil with extended service life when using SENNEBOGEN HydroClean*

1

1

6

Slliding ddddoooooo

rrr

SSSSEEENNNCCCCCCOOOONNNN

The premium cab.

consoles and ergonomic joysticks that move with the seat

pleasant grip through ergonomic design

precise control of all movements through direct and sensitive function activation

quick access to all operating controls through optimized design of all push-buttons and switches

optimum cab climate with automatic air conditioning system, partial tinted glass

pleasant and equal temperature disper-sion by means of 9 nozzles

panoramic view

comfort seat with air suspension

very quiet through optimized noise insulation

Highest safety & comfort with sliding door, wide door opening

ergonomically arranged operating controls for fatigue-free and relaxed working

12 V, 24 V, and USB charging sockets hands-free telephone preparation, do-cument box

various options: electric cooler behind operator`s seat, protective covers, seat air conditioning

Features

ticks

mic design

ents

tric cooler behindective covers, seat

7* Option

Fast and easy diagnosis thanks to straightforward and clearly labeled electrical distributor

Easy access to all service points on the machine

Automatic central lubrication for equipment and slewing ring

Optimized for maintenance

Maintenance and service made easy.

SENNEBOGEN Hydro Clean*

Optimal protection of hydraulic components thanks to 3 μm micro-filter

Cleaner hydraulic oil, longer service life

Central measuring points

Easily accessible Quickly inspect entire hydraulic system

Clear labeling

All parts labeled with a unique part number

Easy and reliable spare parts ordering

8

Mobile MHDMP26

Mobile MMP21

Crawler R25/240* 4-point pedestal

max.0.5 m

max.1.0 m

max.3.0 m

M

K11K9 K11 ULM K12 K13**K11K9 K11 ULM K12 K13**K11K9 K11 ULM K12 K13**

**only available with undercarriage MP26E (MHD)

Modular design - versatile solutions

Attachments Equipment options (others available upon request)

Orange peel grab

Clamshell grab

Magnet plate

Scrap metal shears

E270

2,70 m

Cabs Cab elevation

Maxcab Industry

Maxcab

Uppercarriage

Diesel-hydraulic drive

Electrohydraulic drive

Motorized cable reel

Transformer

Options

Undercarriage variants

* further information about our crawler undercarriages can be found in the separate brochure 821 R E-Series.

9*Optional

and safe working height thanks to stable cab elevation

Ideal overview

made of recycleable sheet steel

Robust side cover

due to the broad outrigger area

High stability

thanks to railings*, grip handles and no-slip steps

Safe entry and exit

even when fully extended, thanks to massive cylinders

High load capacities

Better illumination

9Optional

and safe working heightthanks to stable cabelevation

Ideal overview

made of recycleable sheet steel

Robust side cover

ty

thanks to railings*, grip handles and no-slip steps

Safe entry and exit

even when fully extended, thanks to massive cylinders

High load capacities

Better illumination

for convenient entry and exit

Sliding door

through robust and FEM optimized equipment

Reliable operation

of the work area through powerful LED headlights*

10

SLEWING DRIVEGear box Planetary gearbox with axial piston motor

and integrated brake valve

Parking brake Spring-loaded, hydraulically vented safety multi-disk brake

Slewing ring Large-dimensioned slewing ring

Slewing speed 0-8 rpm, continuous. Hydraulic brake valves integrated into motor ensure ware-free braking

HYDRAULIC SYSTEMLoad Sensing / LUDV hydraulic system for work and travel functions

Pump type Swashplate-type variable displacement piston pump, load pressure-independent flow distri-bution for simultaneous, independent control of work functions

Pump control Zero-stroke control, on-demand flow control - the pumps only pump as much oil as acutally needed, pressure purging, load limit sensing control

Delivery rate 310 l/minOperating pressure

up to 350 bar

Filtration High-performance filtration with long change intervals

Hydraulic tank 260 lControl system Proportional, precision hydraulic actuation of

work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals

Safety All hydraulic circuits secured with safety valves, hydraulic accumulator for emergency equipment and cab lowering if engine stops, pipe fracture safety valves for stick and hoist cylinders

Options Bio-oil Tool Control for programming pressure/rate for up to 10 tools

Additional hydraulic circuit for shear attachment

Load moment warning with capacity utili-zation indicator with/without shutdown

Electronic overload safeguard with overload shutdown

SENNEBOGEN HydroClean 3 μm hydraulic microfilter

ENGINEPower Stage V:

Rated power: 123 kW at 2200 rpm Stage IIIa: Rated power: 119 kW at 2200 rpm

Model Cummins B4.5, Stage V Cummins QSB4.5, Stage IIIa Direct injection, turbo charged, charge air cooler, reduced emissions, ECO-Mode, Idle automation

Cooling Water-cooled

Diesel filter with water separator and heating system

Air filter Dry air filter with integrated pre-separator, safety element, contamination indicator

Fuel tank 300 lDEF tank 30 l (Stage V) Electr. system 24 VBatteries 2 x 110 Ah, battery disconnect switch

Options Engine block heater Electric fuel pump Jump-start battery terminals additional cyclone pre-separator

MACHINE TYPEModel (type) 821

Subject to change.

Technical data, equipment

UPPERCARRIAGEDesign Torsion-resistant upper frame with end

shields all the way from boom linkage to counterweight for optimized force transmission, precision-crafted steel bushings for boom bearings, lockable storage compartment, very low noise emissions

Central lubrication

Automatic central lubrication for equipment and slewing gear

Electrical system

Central electrical distributor, battery disconnect switch

Safety Camera package (right/rear)

Options Slewing gear brake via foot pedal Hand rail at the upper structure for additional safety

LED lighting packages Fire extinguisher Special paint finish Electric heater for hydraulic tank Low-temperature packages Telematic system SENtrack DS

Options Hydraulically driven magnetic generator 9 kW/15 kW

Additional ballast Rotating lights and alarm horns

11Subject to change.

UNDERCARRIAGEDesign Strong undercarriage with 4-point outrigger

support or combination of stabilizer blade and claw support (option), hydraulically locking pendulum steering axle. Pendulum axle cylinder with pipe-fracture safety valves

Drive All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valve and 2-stage power shift transmission. Strong planetary axles with integrated steering cylinder, 2-circuit multi-disk service brake.

Parking brake Spring-loaded multi-disk brake

Tires 8 x 10.00-20 solid rubber

Speed Stage I: 0–5.5 km/h; Stage II: 0–20 km/hOptions 8 x 10.00-20 pneumatic tires

Individual outrigger actuation Additional pushing blade for 4-point outrigger (front or rear)

2-point outrigger and stabilizer blade (front or rear)

Protection for travel drive/shunting coupling Pylon extension

OPERATING WEIGHTMass

Note

821 M with 4-point outrigger, K11 compact loading equipment and orange peel grab 600 l ca. 23,950 kg

821 MHD with 4-point outrigger, K12 compact loading equipment and orange peel grab 600 l ca. 25,100 kg

The operating weight varies by model and equipment.

Technical data, equipment

CAB Cab type Hydraulically elevating cab E270

Cab equipment Sliding door, excellent ergonomics, climate au-tomation, seat heater, air-suspension comfort seat, fresh air filter / circulating air filter, joy-stick steering, 12 V / 24 V connections, SENCON

Options active seat air conditioning Auxiliary heating system with timer Cabs with active carbon filter Armored-glass windshield Armored-glass sunroof Safety side window and rear window Rolling shade for roof window and windshield

Protection guards FOPS protective roof grating Protective front grating Radio with speakers Maxcab industrial cab with undivided armo-red glass windshield

electrical cooling box Steering wheel steering 30° tiltable cab Camera for ground monitoring Protective cover for the seat Comfort armrests Protective ventilation system

EQUIPMENTDesign Sealed and soiling-protected box design with

oversized bearing points for long service life. Oversized bearing points with low-mainte-nance, sealed special bushings, precision-crafted

Cylinders Special hydraulic cylinder with hydraulic end position damping, optimized kinematics for high lifting power. The material handling equipment is specifically designed for high-performance applications.

Central lubrication

Automatic central lubrication system

Options Ball valves on the hydraulic lines - open and close grab

Multi-coupling Adjustable hoisting limiter/stick limiter Additional cameras Boom damping

ELECTRIC DRIVE Option Power: 90 kW / 400 V / 50 Hz

Total connected load 200 kVA, machine fusing 200 (alternatively 250 A with magnet system) for 400 V, motor start-up via star-delta circuit

Advantages: lowest operating costs, quiet and virtually vibration-free work, long service life of hydraulic components

12

7860

0 2 4 6 8 10 12 14-6

-4

-2

0

2

4

6

8

10

12

14

14.0 9.4

9.7

8.2

5555....444

2

8

7,1,

7..0

6..0

4.999

5.6

5.6

5.2

3.99

44.22

[12222 1]

[4,0]

]

[6 6]

[6,1]

[5,8]

[5[5[5,8]8]8]

8]

7]

6]6]

[4 4]

[4,2]

[4,,0]

[4[4[4,,,0]0]0]

[3,4]

[3[3,,3]3]

[3 2]

[3,1]1]1]

[3

[2,4]]

20130117175314[20130308104901]

Undercarriage MP21 Compact boom 5.1 mGrab stick 4.0 m

Cab E270 Maxcab, hydraulically elevating

K9

MLoad ratings

All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Load ratings apply to a machine with deployed 4-point outrigger support and 360° slewing. Load ratings in square bra-ckets [ ] apply to blocked pendulum axle, undeployed outriggers (free-standing) and 360° slewing.

Subject to change.

Machine shown reversed

13

7.5

9.1

5.8

5.8

4.33

5.0

5.5

5.9

6.3

6.7

6.6

5.8

4.1

4.9

5.1

5.2

5.1

4.4

333.6

4.3

4.3

4.3

444.222

4,0

3.3

3.22

3.5

[6,9]

[6[[ ,,,2]]]

[5,6]

[5,3]

[55,2]2]

[4,3]

[4,9]

[4,9]

[4,7]

[4,5]

[4,1]

[3,9]

[3,6]

[3,5]

[3,4]4]4]

[3,4]

[3,3]

[3,2]

[2,9]

[2,7]

[2,7]

[2, ]5]]

[2,5]

[2,4]

[2,3]

[2,2]

[2,1]

[2[2,1]1

[1,9]

[1,8]

-6

-4

-2

0

2

4

6

8

10

12

14

0 2 4 6 8 10 12 14

20130117163153[20130308103152]

Undercarriage MP21 Cab E270 Maxcab, hydraulically elevating

Compact boom 6.3 mGrab stick 4.6 m

K11

MLoad ratings


Subject to change.


14

0 2 4 6 8 10 12 14-6

-4

-2

10

12

14

0

2

4

6

8

5..55

8.1

8.9

7.37 37 37 37 3

3.6

3.9

33.8

444444444..666

44.9

55.33

5.7

66.1

66.4

66.2

5.4

3.88

4.5

44.77

4.8

5.0

5.0

4.8

4.2

3.5

44.00

4.1

4.1

4.1

.00

3.8

3.3

3.5

3.5

3.4

33.33

3

[[5[5,5]

[6[ ,,6]]

[5[5[[[[[[5555[[[[[[[[[[[[[[[[[[[ ,,8]8]8]

[4,8]

[3,6]

[3[3,,9]9]9]

[33,8]

[4[4,,6]]

[44,9]

[44,9]

[44,6]

[44[ ,,3]]

[33,6]

[33,4]

[33[3,,2]2]

[3[3[3[ ,,,,4]4]

[3,4]

[3,4]

[3,3]

[3[3,,1]]

[2,7]

[2,5]

[2[2,,4]4]

[2,5]5]5]

[2,5]

[2,4]

[2[2,,3]3]

2,2]

[2,1]

[2,0]

[1[1,,9]9]

[1,8]

[1[1,,8]8]

[1,7]

[[[

[

K12

20130117173923[20130308105235]



M



Subject to change.

Load ratings

15

0 2 4 6 8 10 12 14-6

-4

-2

10

12

14

0

2

4

6

8

777.444

5.3

666.4

8.1

8.9

5.1

444.0

5.1

5.6

5.8

6.1

6.4

6.0

44.9

3.99

4.7

4.7

4.9

4.5

3.8

4.0

4.0

4.0

3.4

3.00

5,6]]6]

777,44]4

[555[5,,,,3]3]

[6,4]

[6,,4]

[5[5[5,,,7]7]7]]

[5,1]

[4,8]

[4[4,,,0]0]

[4,,6]

[4,,6]

[4,,4]

[4[ ,,,1]]

[3[ ,,,,,,,,,,,8]

[3,,5]

[3,,3]

[3[3,,,2]2]

[3,1]

[3,1]

[3,0]

[2[ ,,9]]

[2,5]

[2,4]

[2[2,,4]4]

[2,2]

[2[ ,,1]]

[2,0]

[1,9]9]9]

[1,9]

[1,5]5

K11 ULM

20130117173041[20130308105540]



M


Subject to change.


Load ratings

16

821 M with undercarriage and Maxcab with elevation type E270, hydraulically elevating.

Compact boom Grabstick Transport length (L) Transport height (H)K9 5.1 m 4.0 m 8.5 m 3.25 mK11 6.3 m 4.6 m 9.65 m 3.25 mK11 ULM 6.3 m 4.2 m ULM 9.7 m 3.25 mK12 7.0 m 4.9 m 10.4 m 3.25 m

821 M with undercarriage MP21.

MDimensionsTransport width: 2.555 mm

Subject to change.

2550

4365

47902500

3580

11030

0

345

2555(650)

1280

5880

3245

2635 2400 (rear radius 2420)

H

L

17



MHD

0 2 4 6 8 10 12 14 16-6

-4

-2

0

2

4

6

8

10

12

14

16

888.0

888

.33

4.01.8

3.6

4.34.

5.1

6.0

4.9

5.8

3.5

3.8

44.00

4.3

4.5

4.7

6.3

4.5

3.3

3.73 7

2.88

2.44

3.13 1

3.7

3.8

3.9

4.8

3.5

4.9 3.9 3.0

3.3

3.3

3.3

33.22

3.8

3.88

2.8

2.3.

2.8.

2.7.

2.62 6.

3.1

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[

[7,2]

[4,9]

[4,0[4,0]]

,3]

[1,81,8[1,8]]]

[333,6]]

[44,3]

[5,1[ ,5 ]]

[4,94 ]

[4,54 ]

[4,3[4,34 ]]

[3,5]

[3,8]

[4,0]

[4,2]

[4[ ,,1]]

[2,6]

[3,4]

[3,2[3,2]]

[3,3]

[3,2]

[3,2]

[3,1[ , ]]

[2,8]

[2,6]

[2,6[2,6]]

[4[44,,2]] [3,2] [2,5[2,5]]

[2,4]

[2,4[ , ]]

[2,3]

[2,2[2,2[2,2]]

[2,1]

[2,9]

8[2,82 8]]]

[2,4]4]4]

[2,5]

[1,,9]

[1[ ,,,9]]

[1,,8]

[2,1[2,1]]

20150826153915[20150826153956]

K13


Subject to change.


Load ratings

18

Dimensions MHD

821 MHD with undercarriage MP26 and K13 equipment variant.

*grab stick must be removed

Technical features and dimensions subject to change.

Transport width 2.750 mm

10340

3255

17000

1815

4685

85

2800

4685

5110

2555(650)

5890

3260

2630

2400 (rear radius 2420)

1290

340

250

3980

4360

2750

110

19

Recommended grabs

Design / size Grab capacityWeight1

max. piled densityShell shape

HO G

SGM l kg kg t/m3

400.30-4 400 1290 1390

2,0600.30-4 600 1315 1445

800.30-4 800 1350 1515

Design / size Grab capacityWeight1 max. piled density

kg t/m3

1000.40 1000 1440

2,01200.40 1200 1575

1400.40 1400 1650

1600.40 1600 1775

Type series / model Power Deadweight Breakaway force

Load -bearing capacity in kg

WOKO kW kg kN Slab (Safety factor 2)

S-RLB 10 4,8 730 190 9500

S-RLB 11.5 5,5 1060 240 12000

S-RLB 12.5 8,8 1310 280 14000

S-RLB 13.5 10,0 1700 300 15000

Recommended magnetic generator: 9/15 kW

Design / size Grab capacity Weight1

SGR l kg

800.30 L 380 1000

1000.30 L 450 1050

1200.30 L 520 1060

Design / size Grab capacityWeight1

max. piled densityShell shape

HO G

SGM l kg kg t/m3

400.30 400 1480 1530

2,0600.30 600 1510 1590

800.30 800 1550 1660

Sorting grab SGR

Clamshell grab SGZ

Magnetic plates

SGM orange peel grab (4 shells)

SGM orange peel grab (5 shells)

Dimensions in [mm]

1) Weight information without grab suspension, stick bolts, hose system

2) Half-open shells: shell sheet steel width 400 mm, 500 mm wide for 1250 l capacity and higher

*) Available upon request

Detailed information on grabs, as well as log grabs, quick-release systems, and other attachments can be found in the „Attachments“ brochure.

SENNEBOGEN Maschinenfabrik GmbH Sennebogenstrasse 10 94315 Straubing, Germany

Ord

er n

o. /

item

no.

1875

7182

1M-E

-011

615-

0417

15-0

3181

0-02

1915

-022

005

www.sennebogen.com

Tel. +49 9421 540-144/[email protected]

This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machinesdelivered by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances.

All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners.Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants offered. Requested performance characteristics are only binding if they are expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. © SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.

9–13 913 m - SENNEBOGEN · * Option 5 4 No-slip work surfaces 2 cameras to the right and rear...

Documents

Transcript of 9–13 913 m - SENNEBOGEN · * Option 5 4 No-slip work surfaces 2 cameras to the right and rear...