989-99-D
-
Upload
speedflow-products-pty-ltd -
Category
Documents
-
view
228 -
download
2
description
Transcript of 989-99-D
![Page 1: 989-99-D](https://reader031.fdocuments.us/reader031/viewer/2022013109/568c0eb81a28ab955a9180e5/html5/thumbnails/1.jpg)
Part Number: 989-99-D
Description: Weld On Boss to suit EFI Injectors
Date: 17 September 2012
Need to fabricate a new manifold? Are you doing an EFI conversion on a carbureted motor or just want to add a new style high flow injectors to your current system?
Speedflow now have a simple solution with our new Weld On Boss to suit EFI Injectors. These are machined from the same quality 6061-T6 aluminum as our other weld on fittings which is perfect for TIG welding.
At 1.45” (37mm) in length and a 5/8” (15.9mm) base diameter, these are perfect for custom manifolds and conversions. They are manufactured to suit a variety of manifolds, and can be machined, port matched or shortened to the requirements of the application. The 5/8” (15.9mm) base can be welded to the manifold and steps up to the injector with a machined radius for a beautiful finish.
These suit common Bosch Injectors or similar injectors that use a 9/16” (14mm) OD o-ring.
These weld on bossed are only available in a raw unanodised finish.
Sold individually.
Contact your nearest Speedflow dealer for more information.
Weld On BOss TO suiT eFi inecTOrPArT nO. size lengTh MATeriAl
989-99-D 9/16” (14mm) ID 1.45” (37mm) Aluminium
Australian Made Performance Hose FittingsProduct Press release
Speedflow Products Pty Ltd · 3-5 Coolabah Drive · Taree · NSW 2430 · AustraliaTel: 61 2 6552 6144 · Techline: 1800 242 918 · Fax: 61 2 6551 0253
Email: [email protected] · [email protected] · [email protected] · Web: www.speedflow.com.au