Note:You may use teflon tape butbe sure not to get any in thesensor.

Dimmer:Use the suppliedPlastic “KEY” toadjust the brightnessby turning it right to brighten and left to dim.

Note:You may use teflon tape but be sure not to get anyin the sensor.

Note:You may use teflon tape but be sure not to get anyin the sensor.

-OptionalOil adapter plate sold separatly

EVO Series Oil Temp and Water Temp

Red Wire- 12v Accessory PowerWhite Wire- 12v Accessory PowerBlack Wire- GroundOrange Wire- 12v Headlight Switched Power(This is a power source that only gets power whenheadlights are on)

Installing the sensor:Installing the sensor:Oil pressure sender thread pitch is 1/8th NPT It is suppose to become tighter when installing. Please do not over tighten the sensor. Black to chassis groundBrown from sender to brown on gauge harness. Green from sender to green on gauge harness.

Red Wire- 12v Accessory PowerWhite Wire- 12v Accessory PowerBlack Wire- GroundOrange Wire- 12v Headlight Switched Power(This is a power source that only gets power whenheadlights are on)Green Green Wire- Run to the White wire on the sensor.Temp sensor thread pitch is 1/8th NPT. It is suppose to become tighter when installing. Please do not over tighten the sensor.

White wire- Run to green wire on GaugeBlack wire- Run to separate ground.(not to black wire on gauge)

EVO Series Oil Pressure