9016Y Snow Lift Eng & Fr Instructions
-
Upload
ignition-products-inc -
Category
Documents
-
view
217 -
download
2
description
Transcript of 9016Y Snow Lift Eng & Fr Instructions
Install stem # 1 over the basepiece & fasten with 2 of thelocking pins
Insert Stem # 2 (with handle) intoStem # 1 with the straight portion ofthe handle facing the opposite way ofthe base & fasten with locking pins
IGNITION PRODUCTS WILL NOT BE RESPONSIBLE FOR PERSONAL INJURY OR DAMAGE TOPERSONAL PROPERTY DUE TO INCORRECT ASSEMBLY OR USE.
FOR MORE INFORMATION CONTACT IGNITION PRODUCTS @ (905) 683
PARTS LIST
Qty Description
1 Base Piece
1 Stem Piece # 1
1 Stem Piece # 2 w/Handle
2 Hook Brackets
1 Wide Hook
1 Medium Bolt, 1 Long Bolt, 2 Lock Nuts,4 Locking Pins
PREMIUM SNOWMOBILE LIFTPART # 9016Y
ASSEMBLY INSTRUCTIONS
Insert Stem # 2 (with handle) intoStem # 1 with the straight portion ofthe handle facing the opposite way ofthe base & fasten with locking pins
Use the long bolt & lock nut tobrackets. (Make sure the narrow portion of the bracketsattached to the handle). Use the mediumfasten the hook brackets to the end of the handle
YOUR LIFT IS NOWCOMPLETELY ASSEMBLED
AND READY TO USE
IGNITION PRODUCTS WILL NOT BE RESPONSIBLE FOR PERSONAL INJURY OR DAMAGE TOPERSONAL PROPERTY DUE TO INCORRECT ASSEMBLY OR USE.
FOR MORE INFORMATION CONTACT IGNITION PRODUCTS @ (905) 683
PREMIUM SNOWMOBILE LIFTPART # 9016Y
ASSEMBLY INSTRUCTIONS
long bolt & lock nut to fasten the hook onto the hookMake sure the narrow portion of the brackets are
the medium bolt & lock nut tofasten the hook brackets to the end of the handle
YOUR LIFT IS NOWCOMPLETELY ASSEMBLED
AND READY TO USE
IGNITION PRODUCTS WILL NOT BE RESPONSIBLE FOR PERSONAL INJURY OR DAMAGE TOPERSONAL PROPERTY DUE TO INCORRECT ASSEMBLY OR USE.
FOR MORE INFORMATION CONTACT IGNITION PRODUCTS @ (905) 683-3785
Installez la tige #1 sur le châssis etfixez avec 2 tiges
Insérez le tube #2 (avec ka poignée)dans le tube #1 avec la portionrectiligne de la poignée faisant facede façon opposée au châssis & fixezavec les tiges de
IGNITION PRODUCTS N’EST RESPONSABLE DES BLESSURES PERSONNELLES OU DES DOMMAGES À LA PROPRIÉTÉCAUSÉS PAR UN MONTAGE OU UNE UTILISATION
POUR PLUS D’INFORMATION, CONTACTEZ IGNITION PRODUCTS @ (905) 683
LISTE DES PIÈCES
Qté Description
1 Châssis
1 Tube # 1
1 Tube # 2 a / Poignée
2 Supports de crochets
1 Crochet large
1 Boulon Medium, 1 Boulon Long, 2Écrous de blocage, 4 Tiges de blocage
SOULÉVATEUR HAUTE QUALITÉ DE MOTONEIGE
PIÈCE # 9016YINSTRUCTIONS DE MONTAGE
Insérez le tube #2 (avec ka poignée)dans le tube #1 avec la portionrectiligne de la poignée faisant facede façon opposée au châssis & fixezavec les tiges de blocage
Utilisez le boulon long & l’écrou de blocage pour fixer lecrochet sur les supports de crochets. (Assurezpartie étroite des supports soit attachée à la poignée). Utilisezle boulon moyen & l’écrou de blocage pour fixer les supportsde crochet à l’extrémité de la poignée.
VOTRE SOULÉVATEUR ESTMAINTENANT ASSEMBLÉET PRÊT À ÊTRE UTILISÉ
IGNITION PRODUCTS N’EST RESPONSABLE DES BLESSURES PERSONNELLES OU DES DOMMAGES À LA PROPRIÉTÉCAUSÉS PAR UN MONTAGE OU UNE UTILISATION INADÉQUATE.
POUR PLUS D’INFORMATION, CONTACTEZ IGNITION PRODUCTS @ (905) 683
SOULÉVATEUR HAUTE QUALITÉ DE MOTONEIGE
PIÈCE # 9016YINSTRUCTIONS DE MONTAGE
Utilisez le boulon long & l’écrou de blocage pour fixer lecrochet sur les supports de crochets. (Assurez-vous que lapartie étroite des supports soit attachée à la poignée). Utilisezle boulon moyen & l’écrou de blocage pour fixer les supports
crochet à l’extrémité de la poignée.
VOTRE SOULÉVATEUR ESTMAINTENANT ASSEMBLÉET PRÊT À ÊTRE UTILISÉ
IGNITION PRODUCTS N’EST RESPONSABLE DES BLESSURES PERSONNELLES OU DES DOMMAGES À LA PROPRIÉTÉINADÉQUATE.
POUR PLUS D’INFORMATION, CONTACTEZ IGNITION PRODUCTS @ (905) 683-3785