88509995 C Kitchen Center
5
88509995 C Kitchen Center PART LIST Casual Attire For Today's Home Dear Our Valuable Customers, Please follow our assembly instructions in every step, we guarantee that you will get the perfect merchandise. Thank you so much for purchasing our quality products. Thai Patent Pending Numbers 086878 Tools Required For Assembly : Philips screwdriver A. Top 1 pc. N. Shelf 2 pcs. D. Middle Frame 1 pc. C. Side Panel 1 pc. F. Back Panel 3 pcs. B. Side Panel 1 pc. I. Front Rail 1 pc. L. Door 1 pc. M. Door 1 pc. O. Drawer 2 pcs. S. Side Rack 1 pc. T. Side Rack 1 pc. V. Brush Chrome Pipes 3 pcs. W. Handle Arm 2 pcs. U. Base Rack 1 pc. (Knock-Down Construction, please refer to the last page of these instructions for steps to complete assembling drawers) K. Base 1 pc. E. Middle Frame 1 pc. H. Lower Back Stretcher 1 pc. G. Upper Back Stretcher 1 pc. R. Back Support 2 pcs. Q. Divider 1 pc. X. Round Arm 1 pc. O. Shelf 2 pcs. P. Drawer 2 pcs. Caster with and without lock 4 pcs. Head Cap Bolt 30 pcs. (+1Extra) Hex Wrench 1 pc. Machine Screw for Pull Handle 6 pcs. Adjustable Pin 16 pcs. (+1 Extra) Wood Plug 7 pcs. (+2 Extra) Pull Handle 2 pcs. Pull Handle 2 pcs. Wood Screw for Bottom Drawer Part (Short 6 x ½”) 12 pcs.(+1 Extra) Wood Screw for Side Drawer Part (Long 6 x 1” ) 16 pcs.(+1 Extra) Wood Screw 16 pcs. (+ 1 Extra) HARDWARE LIST J1. Back Post 1 pc. J2. Back Post 1 pc.
Transcript of 88509995 C Kitchen Center
88509995 CKitchen Center
PART LIST
Casual Attire For Today's Home
Dear Our Valuable Customers,
Please follow our assembly instructions in every step,we guarantee that you will get the perfect merchandise.
Thank you so much for purchasing our quality products.
Thai Patent Pending Numbers 086878
Tools Required For Assembly : Philips screwdriver
A.Top1 pc.
N.Shelf2 pcs.
D.Middle Frame
1 pc.
C.Side Panel1 pc.
F.Back Panel3 pcs.
B.Side Panel
1 pc.
I.Front Rail1 pc.
L.Door1 pc.
M.Door1 pc.
O.Drawer 2 pcs.
S.Side Rack
1 pc.
T.Side Rack1 pc.
V.Brush Chrome Pipes 3 pcs.
W.Handle Arm2 pcs.
U.Base Rack1 pc.
(Knock-Down Construction, please refer to the last page of these instructions for steps to complete assembling drawers)
K.Base1 pc.
E.Middle Frame1 pc.
H.Lower Back Stretcher1 pc.
G.Upper Back Stretcher1 pc.
R.Back Support2 pcs.
Q.Divider1 pc.
X.Round Arm1 pc.
O.Shelf2 pcs.
P.Drawer2 pcs.
Casterwith andwithout lock4 pcs.
Head Cap Bolt30 pcs. (+1Extra)
Hex Wrench1 pc.
Machine Screw for Pull Handle6 pcs.
Adjustable Pin16 pcs. (+1 Extra)
Wood Plug7 pcs. (+2 Extra)
Pull Handle2 pcs.
Pull Handle2 pcs.
Wood Screwfor Bottom Drawer Part (Short 6 x ½”) 12 pcs.(+1 Extra)
Wood Screwfor Side Drawer Part(Long 6 x 1” )16 pcs.(+1 Extra)
Wood Screw16 pcs. (+ 1 Extra)
HARDWARE LIST
J1.Back Post1 pc.
J2.Back Post1 pc.
Assembly Instructions 2/5
STEP 1
IMPORTANT NOTEDo not tighten up all the screws until each part is properly assembled.You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 2
Turn the unit in Step1 upside down.Attach the Middle Frame (D) and (E) to the unit. J
AA
E
B
C
F
AG
H
I
J1
Head Cap BoltFF
D
Attach the Lower Back Stretcher (H) to the Side Frame (B), using Head Cap Bolts.
Attach The Back Post (J1),(J2) to the Lower Back Stretcher (H) and slide the Back Panels (F) to place.
Attach the Upper Back Stretcher (G) to the assembled unit, using Head Cap Bolts.
Attach the Front Rail (I) to the Side Frame (B) with Head Cap Bolts.
Attach the Side Frame (C) to the assembled unit, tighten up all Head Cap Bolts.
Head Cap Bolt
J2
Assembly Instructions 3/5
STEP 3
STEP 4
STEP 5
Turn the assembled unit to back its normal position.
Attach the Divider (Q) in the middle.
Attach the Back Support (R) to theUpper Back Stretcher (G), using Head Cap Bolts.
Attach the Handle Arm (W) to the Side Panel (C) with Head Cap Bolts. Slide the Round Arm (X) into place.
Place the Base (K) on the unit.
Tighten up all Head Cap Bolts.
R
AX
W
Q
K
Attach 4 Casters to the underside of the Base (K), put the 2 Casters with lock in front as you first need to keep the cart firmly in place. (See sticker in the bottom indicating front side)
K
C
R
W
Wood Screw
Locking Caster
Head Cap Bolt
Head Cap Bolt
G
Assembly Instructions 4/5
STEP 6
STEP 7Place the Top (A) on the unit.Tighten up the Head Cap Bolts.
STEP 8
STEP 9
AM
Insert the Adjustable Pins into the Side Panels and into the Middle Frame at the desired level, then put the Shelf (N) into the place.
Attach the Pull Handles to the Door (L)and (M) with Machine Screws.
Attach the Door (L) and (M) to the Side Panel by sliding the door lift hinges into the side panel lift hinges.
See assembly instructions for Drawers in the last page.
Slide the Drawers (P) into place.
Cover all holes with Wood Plugs.Lift hinge Assembly
Pull Handle Assembly
Adjustable Pin
AA
L
N
NO
AP
S
T
B
U
V
Attach the Side Rack (S) to the Side Panel (B) with Head Cap Bolts.
Attach the Brush Chrome Pipes(V) and the Base Rack (U) to the pre-drilled holes of the Side Rack (S).
Attach the Side Rack (T) to the Side Panel (B).
O
Head Cap Bolt
Head Cap Bolt
AP1
(Fig)1
MAKE SURE ROLLERIS ON THE BACK
Assembly Instructions 5/5
Drawer
Unit Part List
P1.Front Part2 pcs.
P3.Side Part2 pcs.
P4.Side Part2 pcs.
P2.Back Part2 pcs.
(Fig) 4
(Fig)2
(Fig) 2Turn the assembled drawer over and slide the Plywood Bottom Part (O5) into the grooveson Side Parts (O3) and (O4). Be sure to pushthe plywood all the way forward so it meets the Front Part (O1).
(Fig) 3Insert the remaining (6) 1/2” screwsinto the pre-drilled holes in Bottom Part(O5), then tighten all screws
* If you are missing any of these parts, please contact our DMI Customer Service Department at 1-877-831-0319 or fax us at 1-800-755-2878.
(Fig) 1Line up Side Parts (O3) and (O4) to the Front Part (O1) and Back Part (O2). Be sure tofollow the Arrow sign sticker on the parts.Using a Philips screw driver, insert 1” screwsinto each of the 4 pre-drilled holes in sides (O3) and (O4), then tighten half way.
P5.Bottom Part2 pcs.
AP5
P4
P3
P2
AP1
P3
P4
(Fig)3
AP5
P3
P4AP1
P2
(Fig)4
Assemble the Pull Handles with Machine Screws onthe Front Part (O1).
