87199143 BS en Standard Code List
-
Upload
sandley-apin -
Category
Documents
-
view
66 -
download
1
Transcript of 87199143 BS en Standard Code List
-
BRITISH STANDARDS
BS 4875:-Strength and stability of furniture
BS 4875-7:2006
Domestic and contract storage
furniture. Performance
requirementssupersedes BS 4875-7:1998ISBN 0 580 49215 X34.00 members, 68.00 non-members
FW/0
BS 5000:-
Rotating electrical machines of
particular types or for particular
applications
BS 5000-3:2006
Generators to be driven by
reciprocating internal combustion
engines. Requirements for
resistance to vibrationsupersedes BS 5000-3:1980ISBN 0 580 49254 028.00 members, 56.00 non-members
PEL/2
BS 5385:-Wall and floor tiling
BS 5385-2:2006
Design and installation of external
ceramic and mosaic wall tiling in
normal conditions. Code of practicesupersedes BS 5385-2:1991ISBN 0 580 49232 X64.00 members, 128.00 non-members
B/539
BS 5400:-
Steel, concrete and composite
bridges
BS 5400-2:2006Specification for loadssupersedes BS 5400-2:1978ISBN 0 580 46715 574.00 members, 148.00 non-members
B/525/10
BS 6001:-
Sampling procedures for inspection
by attributes
BS 6001-0:2006
Introduction to the BS 6001 (ISO
2859) series of standards for
sampling for inspection by
attributessupersedes BS 6001-0:1996ISBN 0 580 49315 634.00 members, 68.00 non-members
SS/5
BS 6465:-Sanitary installations
BS 6465-3:2006
Code of practice for the selection,
installation and maintenance of
sanitary and associated appliancessupersedes BS 6465-1:1994ISBN 0 580 49199 464.00 members, 128.00 non-members
B/503
BS 7346:-
Components for smoke and heat
control systems
BS 7346-7:2006
Code of practice on functional
recommendations and calculation
methods for smoke and heat
control systems for covered car
parksno current standard is supersededISBN 0 580 49087 464.00 members, 128.00 non-members
FSH/25/4
BS 7531:2006
Rubber bonded fibre jointing for
industrial and aerospace purposes.
Specificationsupersedes BS 7531:1992 and BS F 130:1987ISBN 0 580 49231 149.00 members, 98.00 non-members
PSE/2
BS 8473:2006
Intruder and hold-up alarm
systems. Management of false
alarms. Code of practicesupersedes DD 245:2002 which remains currentISBN 0 580 48850 049.00 members, 98.00 non-members
GW/1
BS 8478:2006
Respiratory protective devices.
Breathing gases for diving and
hyperbaric applicationsno current standard is supersededISBN 0 580 49166 834.00 members, 68.00 non-members
PH/4/7
BS 8481:2006
Design, preparation and
application of internal gypsum,
cement, cement and lime
plastering systems. Specificationsupersedes BS 5492:1990ISBN 0 580 49184 656.00 members, 112.00 non-members
B/544
BS EN PUBLICATIONS
BS EN ISO 140:-
Acoustics. Measurement of sound
insulation in buildings and of
building elements
BS EN ISO 140-16:2006
Laboratory measurement of the
sound reduction index
improvement by additional liningno current standard is supersededISBN 0 580 49363 649.00 members, 98.00 non-members
EH/1/6
Page 1 of 64BS EN PUBLICATIONS
-
BS EN 153:2006
Methods of measuring the energy
consumption of electric mains
operated household refrigerators,
frozen food storage cabinets, food
freezers and their combinations,
together with associated
characteristicssupersedes BS EN 153:1996ISBN 0 580 49256 734.00 members, 68.00 non-members
RHE/5
BS EN 300:2006
Oriented strand boards (OSB).
Definitions, classification and
specificationssupersedes BS EN 300:1997ISBN 0 580 49105 649.00 members, 98.00 non-members
B/541
BS EN 335:-
Durability of wood and wood-based
products. Definitions of use
classes
BS EN 335-1:2006Generalsupersedes BS EN 335-1:1992ISBN 0 580 49004 128.00 members, 56.00 non-members
B/515/2
BS EN 415:-Safety of packaging machines
BS EN 415-5:2006Wrapping machinesno current standard is supersededISBN 0 580 49230 378.00 members, 156.00 non-members
MCE/3/3
BS EN 480:-
Admixtures for concrete, mortar
and grout. Test methods
BS EN 480-2:2006Determination of setting timesupersedes BS EN 480-2:1997ISBN 0 580 49250 828.00 members, 56.00 non-members
B/517/3
BS EN 482:2006
Workplace atmospheres. General
requirements for the performance
of procedures for the measurement
of chemical agentssupersedes BS EN 482:1994ISBN 0 580 49140 449.00 members, 98.00 non-members
EH/2/2
BS EN 622:-Fibreboards. Specifications
BS EN 622-5:2006
Requirements for dry process
boards (MDF)supersedes BS EN 622-5:1997ISBN 0 580 49165 X34.00 members, 68.00 non-members
B/541
BS EN 725:-
Advanced technical ceramics.
Methods of test for ceramic
powders
BS EN 725-11:2006
Determination of densification on
natural sinteringsupersedes DD ENV 725-11:1994ISBN 0 580 49225 728.00 members, 56.00 non-members
RPI/13
BS EN 869:2006
Safety of machinery. Safety
requirements for pressure metal
diecasting unitssupersedes BS EN 869:1998ISBN 0 580 49036 X64.00 members, 128.00 non-members
MCE/3/10
BS EN 926:-Paragliding equipment. Paragliders
BS EN 926-1:2006
Requirements and test methods for
structural strengthsupersedes BS EN 926-1:1996ISBN 0 580 49141 234.00 members, 68.00 non-members
SW/136/6
BS EN 975:-
Sawn timber. Appearance grading
of hardwoods
BS EN 975-2:2004Poplarsno current standard is supersededISBN 0 580 49106 428.00 members, 56.00 non-members
B/543
BS EN 1504:-
Products and systems for the
protection and repair of concrete
structures. Definitions,
requirements, quality control and
evaluation of conformity
BS EN 1504-6:2006Anchoring of reinforcing steel barno current standard is supersededISBN 0 580 49246 X49.00 members, 98.00 non-members
B/517/8
BS EN 1504-7:2006Reinforcement corrosion protectionno current standard is supersededISBN 0 580 49247 834.00 members, 68.00 non-members
B/517/8
BS EN 1622:2006
Water quality. Determination of the
threshold odour number (TON) and
threshold flavour number (TFN)supersedes BS EN 1622:1998ISBN 0 580 48929 949.00 members, 98.00 non-members
EH/3/2
BS EN 1991:-Eurocode 1: Actions on structures
BS EN 1991-1-7:2006General actions. Accidental actionsno current standard is supersededISBN 0 580 48259 668.00 members, 136.00 non-members
B/525/1
Page 2 of 64BS EN PUBLICATIONS
-
BS EN 1991-3:2006
Actions induced by cranes and
machinesno current standard is supersededISBN 0 580 48268 564.00 members, 128.00 non-members
B/525/1
BS EN 1998:-
Eurocode 8: Design of structures
for earthquake resistance
BS EN 1998-4:2006Silos, tanks and pipelinessupersedes DD ENV 1998-4:1999ISBN 0 580 49272 974.00 members, 148.00 non-members
B/525/8
BS EN 2713:-
Aerospace series. Cables,
electrical, single and multicore for
general purpose. Operating
temperatures between -55$0DC
and 200$0DC
BS EN 2713-002:2006Screened and jacketed. Generalno current standard is supersededISBN 0 580 49150 128.00 members, 56.00 non-members
ACE/6/-/2
BS EN 2713-004:2006
Screened (braided) and jacketed,
ink jet printable. Product standardno current standard is supersededISBN 0 580 49236 228.00 members, 56.00 non-members
ACE/6/-/2
BS EN 2713-006:2006
Screened (braided) and jacketed,
CO$d2 laser printable. Product
standardno current standard is supersededISBN 0 580 49235 428.00 members, 56.00 non-members
ACE/6/-/2
BS EN 2713-008:2006
Screened (braided) and jacketed,
UV laser printable. Product
standardno current standard is supersededISBN 0 580 49234 628.00 members, 56.00 non-members
ACE/6/-/2
BS EN 2713-010:2006
Screened (braided) and jacketed,
YAG X3 laser printable. Product
standardno current standard is supersededISBN 0 580 49233 828.00 members, 56.00 non-members
ACE/6/-/2
BS EN 2713-011:2006
Silver plated copper screened
(spiral) and jacketed, UV laser
printable. Product standardno current standard is supersededISBN 0 580 49149 828.00 members, 56.00 non-members
ACE/6/-/2
BS EN 3079:2006
Pipe coupling 8$0D30' up to 28000
kPa. Adaptors. Metric series.
Technical specificationno current standard is supersededISBN 0 580 49151 X49.00 members, 98.00 non-members
ACE/69
BS EN 3080:2006
Pipe coupling 8$0D30' in titanium
alloy. Tees, reduced, branch with
thrust wire nutno current standard is supersededISBN 0 580 49152 828.00 members, 56.00 non-members
ACE/69
BS EN 3155:-
Aerospace series. Electrical
contacts used in elements of
connection
BS EN 3155-005:2006
Contacts, electrical, female, type A,
crimp, class T. Product standardno current standard is supersededISBN 0 580 49153 628.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3155-042:2006
Contacts, electrical, triaxial, size
08, male 042, type D, solder, class
P. Product standardno current standard is supersededISBN 0 580 49154 434.00 members, 68.00 non-members
ACE/6/-/3
BS EN 3155-043:2006
Contacts, electrical, triaxial, size
08, female 043, type D, solder,
class P. Product standardno current standard is supersededISBN 0 580 49155 234.00 members, 68.00 non-members
ACE/6/-/3
BS EN 3155-045:2006
Contacts, electrical, female, type A,
double crimping, class T. Product
standardno current standard is supersededISBN 0 580 49175 728.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3155-060:2006
Contacts, electrical, coaxial,
shielded, size 12, male, type D,
solder, class R. Product standardno current standard is supersededISBN 0 580 49388 134.00 members, 68.00 non-members
ACE/6/-/3
BS EN 3155-061:2006
Contacts, electrical, coaxial,
shielded, size 12, female, type D,
solder, class R. Product standardno current standard is supersededISBN 0 580 49397 034.00 members, 68.00 non-members
ACE/6/-/3
Page 3 of 64BS EN PUBLICATIONS
-
BS EN 3218:-
Aerospace series. Connectors,
rectangular, with metallic shells
and screw-locking
BS EN 3218-001:2006Technical specificationno current standard is supersededISBN 0 580 49176 549.00 members, 98.00 non-members
ACE/6/-/3
BS EN 3218-002:2006
Specification of performance and
contact arrangementsno current standard is supersededISBN 0 580 49179 X28.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3218-005:2006
Plug with non-removable size 22
solder contacts. Product standardno current standard is supersededISBN 0 580 49221 428.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3218-006:2006
Receptacle with non-removable
size 22 solder contacts. Product
standardno current standard is supersededISBN 0 580 49222 228.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3218-007:2006
Plug with rear-removable size 20
crimp contacts. Product standardno current standard is supersededISBN 0 580 49223 028.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3218-008:2006
Receptacle with rear-removable
size 20 crimp contacts. Product
standardno current standard is supersededISBN 0 580 49224 928.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3218-009:2006
Protective covers for EN 3218-005
and EN 3218-007 connectors.
Product standardno current standard is supersededISBN 0 580 49177 328.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3218-010:2006
Protective covers for EN 3218-006
and EN 3218-008 connectors.
Product standardno current standard is supersededISBN 0 580 49180 328.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3218-011:2006
Tool, insert extraction for EN
3218-005 to EN 3218-008
connectors. Product standardno current standard is supersededISBN 0 580 49178 128.00 members, 56.00 non-members
ACE/6/-/3
BS EN ISO 3452:-
Non-destructive testing. Penetrant
testing
BS EN ISO 3452-2:2006Testing of penetrant materialssupersedes BS EN ISO 3452-2:2000ISBN 0 580 49033 556.00 members, 112.00 non-members
WEE/46
BS EN 3475:-
Aerospace series. Cables,
electrical, aircraft use. Test
methods
BS EN 3475-203:2006Dimensionsno current standard is supersededISBN 0 580 49167 628.00 members, 56.00 non-members
ACE/6/-/2
BS EN 3475-302:2006Voltage proof testsupersedes BS EN 3475-302:2002ISBN 0 580 49156 028.00 members, 56.00 non-members
ACE/6/-/2
BS EN 3682:-
Aerospace series. Connectors,
plug and receptacle, electrical,
rectangular, interchangeable insert
type, rack to panel, operating
temperature 150$0DC continuous
BS EN 3682-003:2006Inserts. Product standardno current standard is supersededISBN 0 580 49245 128.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3682-007:2006Size 3 plug. Product standardno current standard is supersededISBN 0 580 49396 228.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3708:-
Aerospace series. Modular
interconnection systems. Terminal
junction systems
BS EN 3708-001:2006Technical specificationno current standard is supersededISBN 0 580 49216 849.00 members, 98.00 non-members
ACE/6/-/3
BS EN 3708-002:2006Performance specificationno current standard is supersededISBN 0 580 49217 628.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3708-003:2006
Removable feedback modules
version, sealed. Product standardno current standard is supersededISBN 0 580 49218 428.00 members, 56.00 non-members
ACE/6/-/3
Page 4 of 64BS EN PUBLICATIONS
-
BS EN 3708-004:2006
Removable feedback modules
version, unsealed. Product
standardno current standard is supersededISBN 0 580 49219 228.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3708-005:2006
Frames with accessories for
feedback modules version, sealed
and unsealed. Product standardno current standard is supersededISBN 0 580 49220 634.00 members, 68.00 non-members
ACE/6/-/3
BS EN 3716:-
Aerospace series. Connectors,
single-way, with triaxial interface,
for transmission of digital data
BS EN 3716-001:2006Technical specificationno current standard is supersededISBN 0 580 49244 349.00 members, 98.00 non-members
ACE/6/-/3
BS EN 3716-002:2006
Conditions of use and list of
product standardsno current standard is supersededISBN 0 580 49243 528.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3716-003:2006
Solder receptacle. Product
standardno current standard is supersededISBN 0 580 49242 728.00 members, 56.00 non-members
ACE/6/-/3
BS EN 3733:-
Aerospace series. Connector,
optical, circular, single channel,
coupled by self-locking ring,
operating temperature up to
150$0DC continuous
BS EN 3733-008:2006
Plug sub-assembly for cable to EN
4532 (200 $Gmm/280 $Gmm
fibre). Product standardno current standard is supersededISBN 0 580 49320 228.00 members, 56.00 non-members
ACE/6/-/10
BS EN 3733-009:2006
Receptacle sub-assembly for cable
to EN 4532 (200 $Gmm/280
$Gmm fibre). Product standardno current standard is supersededISBN 0 580 49321 028.00 members, 56.00 non-members
ACE/6/-/10
BS EN 4008:-
Aerospace series. Elements of
electrical and optical connection.
Crimping tools and associated
accessories
BS EN 4008-014:2006
Turret for crimping tool
M22520/31-01. Product standardno current standard is supersededISBN 0 580 49241 928.00 members, 56.00 non-members
ACE/6/-/3
BS EN 4199:-
Aerospace series. Bonding straps
for aircraft
BS EN 4199-002:2006Index of product standardno current standard is supersededISBN 0 580 49240 028.00 members, 56.00 non-members
ACE/6/-/8
BS EN 4415:2006
Aerospace series. Non-metallic
materials. Textiles. Narrow woven
fabrics. Technical specificationno current standard is supersededISBN 0 580 48783 034.00 members, 68.00 non-members
ACE/39
BS EN 4416:2006
Aerospace series. Non-metallic
materials. Textiles. Wide woven
fabrics. Technical specificationno current standard is supersededISBN 0 580 48782 249.00 members, 98.00 non-members
ACE/39
BS EN 4429:2006
Aerospace series. Textiles. Testing
of narrow woven fabrics.
Determination of warp bowno current standard is supersededISBN 0 580 48790 328.00 members, 56.00 non-members
ACE/39
BS EN 4529:-
Aerospace series. Elements of
electrical and optical connection.
Sealing plugs
BS EN 4529-001:2006Technical specificationno current standard is supersededISBN 0 580 49239 728.00 members, 56.00 non-members
ACE/6/-/3
BS EN 4529-003:2006Class T. Product standardno current standard is supersededISBN 0 580 49238 928.00 members, 56.00 non-members
ACE/6/-/3
BS EN 4530:-
Aerospace series. Sealing sleeves
used in elements of connection
BS EN 4530-002:2006
List and utilization of sealing
sleevesno current standard is supersededISBN 0 580 49237 028.00 members, 56.00 non-members
ACE/6/-/3
BS EN ISO 5350:-Pulps. Estimation of dirt and shives
Page 5 of 64BS EN PUBLICATIONS
-
BS EN ISO 5350-2:2006
Inspection of mill sheeted pulp by
transmitted lightsupersedes BS EN ISO 5350-2:1998ISBN 0 580 49330 X34.00 members, 68.00 non-members
PAI/11
BS EN ISO 8871:-
Elastomeric parts for parenterals
and for devices for pharmaceutical
use
BS EN ISO 8871-4:2006
Biological requirements and test
methodsno current standard is supersededISBN 0 580 49229 X34.00 members, 68.00 non-members
CH/212
BS EN ISO 8980:-
Ophthalmic optics. Uncut finished
spectacle lenses
BS EN ISO 8980-4:2006
Specifications and test methods for
anti-reflective coatingssupersedes BS EN ISO 8980-4:2000ISBN 0 580 49243 449.00 members, 98.00 non-members
CH/172/3
BS EN ISO 8988:2006
Plastics. Phenolic resins.
Determination of
hexamethylene-tetramine content.
Kjeldahl method, perchloric acid
method and hydrochloric acid
methodsupersedes BS EN ISO 8988:1997ISBN 0 580 49322 934.00 members, 68.00 non-members
PRI/42
BS EN 10268:2006
Cold rolled steel flat products with
high yield strength for cold forming.
Technical delivery conditionssupersedes BS EN 10268:1999ISBN 0 580 48667 234.00 members, 68.00 non-members
ISE/10
BS EN 10325:2006
Steel. Determination of yield
strength increase by the effect of
heat treatment
(Bake-Hardening-Index)no current standard is supersededISBN 0 580 48971 X28.00 members, 56.00 non-members
ISE/NFE/4/1
DD CEN/TR 10347:2006
Guidance for forming of structural
steels in processingno current standard is supersededISBN 0 580 49285 013.00 members, 26.00 non-members
ISE/12
BS EN ISO 10524:-
Pressure regulators for use with
medical gases
BS EN ISO 10524-1:2006
Pressure regulators and pressure
regulators with flow-metering
devicessupersedes BS EN 738-1:1997ISBN 0 580 49164 156.00 members, 112.00 non-members
CH/121/6
BS EN ISO 10993:-
Biological evaluation of medical
devices
BS EN ISO 10993-2:2006Animal welfare requirementssupersedes BS EN ISO 10993-2:1998ISBN 0 580 49160 949.00 members, 98.00 non-members
CH/194
BS EN ISO 10993-11:2006Tests for systemic toxicity
supersedes BS EN ISO 10993-11:1996ISBN 0 580 49253 256.00 members, 112.00 non-members
CH/194
BS EN ISO 11052:2006
Durum wheat flour and semolina.
Determination of yellow pigment
contentsupersedes BS 4317-31:1995ISBN 0 580 49001 728.00 members, 56.00 non-members
AW/4
BS EN ISO 11979:-
Ophthalmic implants. Intraocular
lenses
BS EN ISO 11979-9:2006Multifocal intraocular lensesno current standard is supersededISBN 0 580 49056 449.00 members, 98.00 non-members
CH/172/7
BS EN ISO 11979-10:2006Phakic intraocular lensesno current standard is supersededISBN 0 580 49043 249.00 members, 98.00 non-members
CH/172/7
BS EN 12441:-
Zinc and zinc alloys. Chemical
analysis
BS EN 12441-11:2006
Determination of silicon in zinc
alloys. Spectrophotometric methodno current standard is supersededISBN 0 580 49171 428.00 members, 56.00 non-members
NFE/8
BS EN 12691:2006
Flexible sheets for waterproofing.
Bitumen, plastic and rubber sheets
for roof waterproofing.
Determination of resistance to
impactsupersedes BS EN 12691:2001ISBN 0 580 49370 928.00 members, 56.00 non-members
B/546
Page 6 of 64BS EN PUBLICATIONS
-
BS EN 12920:2006
Characterization of waste.
Methodology for the determination
of the leaching behaviour of waste
under specified conditionssupersedes DD ENV 12920:1998ISBN 0 580 49306 734.00 members, 68.00 non-members
B/508/1
BS EN 13053:2006
Ventilation for buildings. Air
handling units. Rating and
performance for units, components
and sectionssupersedes BS EN 13053:2001ISBN 0 580 48883 768.00 members, 136.00 non-members
RHE/2
BS EN 13200:-Spectator facilities
BS EN 13200-5:2006Telescopic standsno current standard is supersededISBN 0 580 49161 734.00 members, 68.00 non-members
B/552
BS EN ISO 13433:2006
Geosynthetics. Dynamic
perforation test (cone drop test)supersedes BS EN 918:1996ISBN 0 580 49138 234.00 members, 68.00 non-members
B/553
BS EN 13814:2004
Fairground and amusement park
machinery and structures. Safetyno current standard is supersededISBN 0 580 45468 196.00 members, 192.00 non-members
MCE/3/4
BS EN 13815:2006
Fibrous gypsum plaster casts.
Definitions, requirements and test
methodsno current standard is supersededISBN 0 580 49264 868.00 members, 136.00 non-members
B/544/1
BS EN 13832:-
Footwear protecting against
chemicals
BS EN 13832-1:2006Terminology and test methodsno current standard is supersededISBN 0 580 49263 X49.00 members, 98.00 non-members
PH/1
BS EN 13832-2:2006
Requirements for footwear
resistant to chemicals under
laboratory conditionsno current standard is supersededISBN 0 580 49262 134.00 members, 68.00 non-members
PH/1
BS EN 13832-3:2006
Requirements for footwear highly
resistant to chemicals under
laboratory conditionsno current standard is supersededISBN 0 580 49261 334.00 members, 68.00 non-members
PH/1
BS EN 13836:2006
Gas fired central heating boilers.
Type B boilers of nominal heat
input exceeding 300 kW, but not
exceeding 1 000 kWno current standard is supersededISBN 0 580 49300 890.00 members, 180.00 non-members
GSE/29
BS EN 13959:2004
Anti-pollution check valves. DN 6
to DN 250 inclusive family E, type
A, B, C and Dno current standard is supersededISBN 0 580 49338 556.00 members, 112.00 non-members
B/504/4
BS EN 13999:-
Adhesives. Short term method for
measuring the emission properties
of low-solvent or solvent-free
adhesives after application
BS EN 13999-1:2006General proceduresupersedes DD ENV 13999-1:2001ISBN 0 580 49002 534.00 members, 68.00 non-members
PRI/52
BS EN 14293:2006
Adhesives. Adhesives for bonding
parquet to subfloor. Test methods
and minimum requirementsno current standard is supersededISBN 0 580 49129 334.00 members, 68.00 non-members
PRI/52
BS EN 14408:-
Plastics piping systems for
renovation of underground gas
supply networks
BS EN 14408-1:2004Generalno current standard is supersededISBN 0 580 49116 149.00 members, 98.00 non-members
PRI/88/3
BS EN 14408-3:2004Lining with close-fit pipesno current standard is supersededISBN 0 580 49117 X49.00 members, 98.00 non-members
PRI/88/3
BS EN 14409:-
Plastics piping systems for
renovation of underground water
supply networks
BS EN 14409-1:2004Generalno current standard is supersededISBN 0 580 49115 349.00 members, 98.00 non-members
PRI/88/3
BS EN 14409-3:2004Lining with close fit pipesno current standard is supersededISBN 0 580 49114 549.00 members, 98.00 non-members
PRI/88/3
Page 7 of 64BS EN PUBLICATIONS
-
BS EN 14454:2005
Devices to prevent pollution by
backflow of potable water. Hose
union backflow preventer DN 15 to
DN 32 inclusive. Family H, type Ano current standard is supersededISBN 0 580 49318 049.00 members, 98.00 non-members
B/504/4
BS EN 14475:2006
Execution of special geotechnical
works. Reinforced fillpartially supersedes BS 8006:1995ISBN 0 580 49309 168.00 members, 136.00 non-members
B/526/4
BS EN 14488:-Testing sprayed concrete
BS EN 14488-2:2006
Compressive strength of young
sprayed concreteno current standard is supersededISBN 0 580 49308 328.00 members, 56.00 non-members
B/517/10
BS EN 14488-6:2006
Thickness of concrete on a
substrateno current standard is supersededISBN 0 580 49307 528.00 members, 56.00 non-members
B/517/10
BS EN 14497:2004
Products and systems for the
protection and repair of concrete
structures. Test methods.
Determination of the filtration
stabilityno current standard is supersededISBN 0 580 44543 728.00 members, 56.00 non-members
B/517/8
BS EN 14516:2006Baths for domestic purposesno current standard is supersededISBN 0 580 49259 149.00 members, 98.00 non-members
B/503
BS EN 14527:2006
Shower trays for domestic
purposesno current standard is supersededISBN 0 580 49260 534.00 members, 68.00 non-members
B/503
BS EN ISO 14644:-
Cleanrooms and associated
controlled environments
BS EN ISO 14644-8:2006
Classification of airborne molecular
contaminationno current standard is supersededISBN 0 580 48825 X49.00 members, 98.00 non-members
LBI/30
BS EN 14811:2006
Railway applications. Track.
Special purpose rail. Grooved and
associated constructionno current standard is supersededISBN 0 580 48458 074.00 members, 148.00 non-members
RAE/2/-/1
BS EN 14845:-Test methods for fibres in concrete
BS EN 14845-2:2006Effect on concreteno current standard is supersededISBN 0 580 49303 228.00 members, 56.00 non-members
B/517/11
BS EN 14889:-Fibres for concrete
BS EN 14889-1:2006
Steel fibres. Definitions,
specifications and conformityno current standard is supersededISBN 0 580 49304 049.00 members, 98.00 non-members
B/517/11
BS EN 14889-2:2006
Polymer fibres. Definitions,
specifications and conformityno current standard is supersededISBN 0 580 49305 949.00 members, 98.00 non-members
B/517/11
BS EN 14897:2006
Water conditioning equipment
inside buildings. Devices using
mercury low-pressure ultraviolet
radiators. Requirements for
performance, safety and testingno current standard is supersededISBN 0 580 49299 049.00 members, 98.00 non-members
B/504/13
BS EN 14898:2006
Water conditioning equipment
inside buildings. Active media
filters. Requirements for
performance, safety and testingno current standard is supersededISBN 0 580 49298 249.00 members, 98.00 non-members
B/504/13
BS EN 14899:2005
Characterization of waste.
Sampling of waste materials.
Framework for the preparation and
application of a sampling planno current standard is supersededISBN 0 580 49367 949.00 members, 98.00 non-members
B/508/3
BS EN 14915:2006
Solid wood panelling and cladding.
Characteristics, evaluation of
conformity and markingno current standard is supersededISBN 0 580 49252 449.00 members, 98.00 non-members
B/543
Page 8 of 64BS EN PUBLICATIONS
-
BS EN 14968:2006
Semantics for groundwater data
interchangeno current standard is supersededISBN 0 580 49297 468.00 members, 136.00 non-members
CPI/113
BS EN 14969:2006
Railway applications. Track.
Qualification system for railway
trackwork contractorsno current standard is supersededISBN 0 580 48986 868.00 members, 136.00 non-members
RAE/2
BS EN 14977:2006
Copper and copper alloys.
Detection of tensile stress. 5%
ammonia testno current standard is supersededISBN 0 580 49163 328.00 members, 56.00 non-members
NFE/34
BS EN 15112:2006
External cathodic protection of well
casingpartially supersedes BS 7361-1:1991ISBN 0 580 49102 156.00 members, 112.00 non-members
GEL/603
BS EN 15157:2006
Advanced technical ceramics.
Mechanical properties of ceramic
composites at high temperature in
air at atmospheric pressure.
Determination of fatigue properties
at constant amplitudeno current standard is supersededISBN 0 580 49053 X34.00 members, 68.00 non-members
RPI/13
BS EN 15158:2006
Advanced technical ceramics.
Mechanical properties of ceramic
composites at high temperature
under inert atmosphere.
Determination of fatigue properties
at constant amplitudeno current standard is supersededISBN 0 580 49054 834.00 members, 68.00 non-members
RPI/13
BS EN 15184:2006
Products and systems for the
protection and repair of concrete
structures. Test methods. Shear
adhesion of coated steel to
concrete (pull-out test)no current standard is supersededISBN 0 580 49265 628.00 members, 56.00 non-members
B/517/8
BS EN 15204:2006
Water quality. Guidance standard
on the enumeration of
phytoplankton using inverted
microscopy (Utermoehl technique)no current standard is supersededISBN 0 580 48934 564.00 members, 128.00 non-members
EH/3/5
BS EN ISO 15367:-
Lasers and laser-related
equipment. Test methods for
determination of the shape of a
laser beam wavefront
BS EN ISO 15367-2:2005Shack-Hartmann sensorsno current standard is supersededISBN 0 580 49142 049.00 members, 98.00 non-members
CPW/172
BS EN 15416:-
Adhesives for load bearing timber
structures other than phenolic and
aminoplastic. Test methods
BS EN 15416-4:2006
Determination of open assembly
time for one component
polyurethane adhesivesno current standard is supersededISBN 0 580 48465 328.00 members, 56.00 non-members
PRI/52
BS EN ISO 15753:2006
Animal and vegetable fats and oils.
Determination of polycyclic
aromatic hydrocarbonsno current standard is supersededISBN 0 580 49051 349.00 members, 98.00 non-members
AW/307
BS EN ISO 15848:-
Industrial valves. Measurement,
test and qualification procedures
for fugitive emissions
BS EN ISO 15848-2:2006
Production acceptance test of
valvesno current standard is supersededISBN 0 580 48838 128.00 members, 56.00 non-members
PSE/7/1
BS EN ISO/IEC 17021:2006
Conformity assessment.
Requirements for bodies providing
audit and certification of
management systemssupersedes BS EN 45012:1998ISBN 0 580 49368 756.00 members, 112.00 non-members
CAS/1
BS EN ISO 17665:-
Sterilization of health care
products. Moist heat
BS EN ISO 17665-1:2006
Requirements for the development,
validation and routine control of a
sterilization process for medical
devicessupersedes BS EN 554:1994ISBN 0 580 48982 568.00 members, 136.00 non-members
CH/198
Page 9 of 64BS EN PUBLICATIONS
-
BS EN ISO 18369:-Ophthalmic optics. Contact lenses
BS EN ISO 18369-3:2006Measurement methods
supersedes BS EN ISO 10338:1998, BS EN ISO 10344:1998, BS EN ISO 8599:1997, BS EN ISO 9337-1:2001, BS EN ISO 9337-2:2004, BS EN ISO 9338:1998, BS EN ISO 9339-1:1998, BS EN ISO 9339-2:1998 and BS EN ISO 9341:1998ISBN 0 580 49251 664.00 members, 128.00 non-members
CH/172/9
BS EN ISO 18369-4:2006
Physicochemical properties of
contact lens materialssupersedes BS EN ISO 10339:1999, BS EN ISO 10340:1997, BS EN ISO 11984:2000, BS EN ISO 9913-1:1998, BS EN ISO 9913-2:2000 and BS EN ISO 9914:1997ISBN 0 580 48488 256.00 members, 112.00 non-members
CH/172/9
BS EN ISO 18412:2006
Water quality. Determination of
chromium (VI). Photometric
method for weakly contaminated
waterno current standard is supersededISBN 0 580 49258 334.00 members, 68.00 non-members
EH/3/2
BS EN ISO 19054:2006
Rail systems for supporting
medical equipmentsupersedes BS EN 12218:1999 which remains currentISBN 0 580 49145 556.00 members, 112.00 non-members
CH/121/6
BS EN ISO 19458:2006
Water quality. Sampling for
microbiological analysisno current standard is supersededISBN 0 580 49136 649.00 members, 98.00 non-members
EH/3/4
BS EN ISO 22088:-
Plastics. Determination of
resistance to environmental stress
cracking (ESC)
BS EN ISO 22088-1:2006General guidanceno current standard is supersededISBN 0 580 48766 034.00 members, 68.00 non-members
PRI/21
BS EN ISO 22088-2:2006Constant tensile load methodsupersedes BS EN ISO 6252:1998ISBN 0 580 48767 934.00 members, 68.00 non-members
PRI/21
BS EN ISO 22088-3:2006Bent strip methodsupersedes BS EN ISO 4599:1997ISBN 0 580 48768 734.00 members, 68.00 non-members
PRI/21
BS EN ISO 22088-4:2006Ball or pin impression methodsupersedes BS EN ISO 4600:1998ISBN 0 580 48765 234.00 members, 68.00 non-members
PRI/21
BS EN 50121:-
Railway applications.
Electromagnetic compatibility
BS EN 50121-1:2006Generalsupersedes BS EN 50121-1:2000ISBN 0 580 49107 234.00 members, 68.00 non-members
GEL/9
BS EN 50121-2:2006
Emissions of the whole railway
system to the outside worldsupersedes BS EN 50121-2:2000ISBN 0 580 49113 749.00 members, 98.00 non-members
GEL/9
BS EN 50121-3:-Rolling stock
BS EN 50121-3-1:2006Train and complete vehiclesupersedes BS EN 50121-3-1:2000ISBN 0 580 49112 934.00 members, 68.00 non-members
GEL/9/2
BS EN 50121-3-2:2006Apparatussupersedes BS EN 50121-3-2:2000ISBN 0 580 49109 949.00 members, 98.00 non-members
GEL/9
BS EN 50121-4:2006
Emission and immunity of the
signalling and telecommunications
apparatussupersedes BS EN 50121-4:2000ISBN 0 580 49108 034.00 members, 68.00 non-members
GEL/9
BS EN 50121-5:2006
Emission and immunity of fixed
power supply installations and
apparatussupersedes BS EN 50121-5:2000ISBN 0 580 49111 034.00 members, 68.00 non-members
GEL/9
BS EN 50338:2006
Safety of household and similar
electrical appliances. Particular
requirements for
pedestrian-controlled battery
powered electrical lawnmowerssupersedes BS EN 50338:2001ISBN 0 580 49268 034.00 members, 68.00 non-members
CPL/61/23
BS EN 50461:2006
Solar cells. Datasheet information
and product data for crystalline
silicon solar cellsno current standard is supersededISBN 0 580 49294 X28.00 members, 56.00 non-members
GEL/82
BS EN 60068:-Environmental testing
Page 10 of 64BS EN PUBLICATIONS
-
BS EN 60068-2-54:2006
Tests. Test Ta: Solderability testing
of electronic components by the
wetting balance methodsupersedes BS 2011-2.1Ta:1989ISBN 0 580 49292 334.00 members, 68.00 non-members
EPL/501
BS EN 60079:-
Electrical apparatus for explosive
gas atmospheres
BS EN 60079-0:2006General requirements
supersedes BS EN 60079-0:2004 which remains currentISBN 0 580 49266 474.00 members, 148.00 non-members
GEL/31
BS EN 60194:2006
Printed board design, manufacture
and assembly. Terms and
definitionsno current standard is supersededISBN 0 580 49212 584.00 members, 168.00 non-members
EPL/501
BS EN 60255:-
Measuring relays and protection
equipment
BS EN 60255-27:2005Product safety requirementsno current standard is supersededISBN 0 580 49189 784.00 members, 168.00 non-members
PEL/95
BS EN 60384:-
Fixed capacitors for use in
electronic equipment
BS EN 60384-24:2006
Sectional specification. Surface
mount fixed tantalum electrolytic
capacitors with conductive polymer
solid electrolyteno current standard is supersededISBN 0 580 49203 649.00 members, 98.00 non-members
EPL/40X
BS EN 60384-24-1:2006
Blank detail specification. Surface
mount fixed tantalum electrolytic
capacitors with conductive polymer
solid electrolyte. Assessment level
EZno current standard is supersededISBN 0 580 49202 834.00 members, 68.00 non-members
EPL/40X
BS EN 60384-25:2006
Sectional specification. Surface
mount fixed aluminium electrolytic
capacitors with conductive polymer
solid electrolyteno current standard is supersededISBN 0 580 49201 X49.00 members, 98.00 non-members
EPL/40X
BS EN 60384-25-1:2006
Blank detail specification. Surface
mount fixed aluminium electrolytic
capacitors with conductive polymer
solid electrolyte. Assessment level
EZno current standard is supersededISBN 0 580 49208 734.00 members, 68.00 non-members
EPL/40X
BS EN 60519:-Safety in electroheat installations
BS EN 60519-2:2006
Particular requirements for
resistance heating equipmentsupersedes BS EN 60519-2:1994ISBN 0 580 49057 234.00 members, 68.00 non-members
PEL/27
BS EN 60519-4:2006
Particular requirements for arc
furnace installationssupersedes BS EN 60519-4:1997ISBN 0 580 49344 X34.00 members, 68.00 non-members
PEL/27
BS EN 60598:-Luminaires
BS EN 60598-2-13:2006
Particular requirements. Ground
recessed luminairesno current standard is supersededISBN 0 580 49290 728.00 members, 56.00 non-members
CPL/34/4
BS EN 60706:-Maintainability of equipment
BS EN 60706-2:2006
Maintainability requirements and
studies during the design and
development phasesupersedes BS 6548-2:1992ISBN 0 580 49313 X68.00 members, 136.00 non-members
DS/1
BS EN 60706-3:2006
Verification and collection, analysis
and presentation of datasupersedes BS 6548-3:1992ISBN 0 580 49314 856.00 members, 112.00 non-members
DS/1
BS EN 60749:-
Semiconductor devices.
Mechanical and climatic test
methods
BS EN 60749-26:2006
Electrostatic discharge (ESD)
sensitivity testing. Human body
model (HBM)partially supersedes BS EN 60749:1999ISBN 0 580 49295 834.00 members, 68.00 non-members
EPL/47
BS EN 60749-27:2006
Electrostatic discharge (ESD)
sensitivity testing. Machine model
(MM)partially supersedes BS EN 60749:1999ISBN 0 580 49296 634.00 members, 68.00 non-members
EPL/47
BS EN 60793:-Optical fibres
Page 11 of 64BS EN PUBLICATIONS
-
BS EN 60793-1:-
Measurement methods and test
procedures
BS EN 60793-1-34:2006Fibre curlsupersedes BS EN 60793-1-34:2002ISBN 0 580 49281 834.00 members, 68.00 non-members
GEL/86/1
BS EN 60793-1-49:2006Differential mode delaysupersedes BS EN 60793-1-49:2003ISBN 0 580 49288 549.00 members, 98.00 non-members
GEL/86/1
BS EN 60793-2-40:2006
Product specifications. Sectional
specification for category A4
multimode fibressupersedes BS EN 60793-2-40:2002ISBN 0 580 49282 656.00 members, 112.00 non-members
GEL/86/1
BS EN 60898:-
Electrical accessories.
Circuit-breakers for overcurrent
protection for household and
similar installations
BS EN 60898-2:2006
Circuit-breakers for A.C. and D.C.
operationsupersedes BS EN 60898-2:2001ISBN 0 580 49325 334.00 members, 68.00 non-members
PEL/23/1
BS EN 60947:-
Low-voltage switchgear and control
gear
BS EN 60947-2:2006Circuit-breakerssupersedes BS EN 60947-2:2003ISBN 0 580 49185 4102.00 members, 204.00 non-members
PEL/17/2
BS EN 61010:-
Safety requirements for electrical
equipment for measurement,
control, and laboratory use
BS EN 61010-2-020:2006
Particular requirements for
laboratory centrifugessupersedes BS EN 61010-2-020:1995ISBN 0 580 49287 756.00 members, 112.00 non-members
EPL/66
BS EN 61082:-
Preparation of documents used in
electrotechnology
BS EN 61082-1:2006Rulessupersedes Parts 1-4 of BS EN 61082ISBN 0 580 49181 178.00 members, 156.00 non-members
GEL/3
BS EN 61189:-
Test methods for electrical
materials, interconnection
structures and assemblies
BS EN 61189-6:2006
Test methods for materials used in
manufacturing electronic
assembliesno current standard is supersededISBN 0 580 49293 156.00 members, 112.00 non-members
EPL/501
BS EN 61290:-Optical amplifiers. Test methods
BS EN 61290-5-1:2006
Reflectance parameters. Optical
spectrum analyzer methodsupersedes BS EN 61290-5-1:2000ISBN 0 580 49157 928.00 members, 56.00 non-members
GEL/86/3
BS EN 61300:-
Fibre optic interconnecting devices
and passive components. Basic
test and measurement procedures
BS EN 61300-2-46:2006Tests. Damp heat cyclicno current standard is supersededISBN 0 580 49209 564.00 members, 128.00 non-members
GEL/86/2
BS EN 61326:-
Electrical equipment for
measurement, control and
laboratory use. EMC requirements
BS EN 61326-2-3:2006
Particular requirements. Test
configuration, operational
conditions and performance criteria
for transducers with integrated or
remote signal conditioningpartially supersedes BS EN 61326:1998ISBN 0 580 49210 949.00 members, 98.00 non-members
GEL/65/1
BS EN 61347:-Lamp controlgear
BS EN 61347-2-13:2006
Particular requirements for D.C. or
A.C. supplied electronic
controlgear for LED modulesno current standard is supersededISBN 0 580 49137 456.00 members, 112.00 non-members
CPL/34/3
DD CLC/TS 61643:-
Low-voltage surge protective
devices
DD CLC/TS 61643-12:2006
Surge protective devices
connected to low-voltage power
systems. Selection and application
principlesno current standard is supersededISBN 0 580 49326 164.00 members, 128.00 non-members
PEL/37/1
BS EN 61755:-
Fibre optic connector optical
interfaces
Page 12 of 64BS EN PUBLICATIONS
-
BS EN 61755-2-1:2006
Optical interface standard single
mode non-angled physically
contacting fibresno current standard is supersededISBN 0 580 49204 428.00 members, 56.00 non-members
GEL/86/2
BS EN 61760:-Surface mounting technology
BS EN 61760-1:2006
Standard method for the
specification of surface mounting
components (SMDs)supersedes BS EN 61760-1:1999ISBN 0 580 49213 356.00 members, 112.00 non-members
EPL/501
BS EN 61788:-Superconductivity
BS EN 61788-3:2006
Critical current measurement. D.C.
critical current of Ag- and/or Ag
alloy-sheathed Bi-2212 and
Bi-2223 oxide superconductorssupersedes BS EN 61788-3:2001ISBN 0 580 49146 349.00 members, 98.00 non-members
L/-/90
BS EN 61937:-
Digital audio. Interface for
non-linear PCM encoded audio
bitstreams applying IEC 60958
BS EN 61937-6:2006
Non-linear PCM bitstreams
according to the MPEG-2 AAC and
MPEG-4 AAC audio formatssupersedes BS EN 61937-6:2002ISBN 0 580 49327 X49.00 members, 98.00 non-members
EPL/100
BS EN 62013:-
Caplights for use in mines
susceptible to firedamp
BS EN 62013-1:2006
General requirements.
Construction and testing in relation
to the risk of explosionsupersedes BS EN 62013-1:2002ISBN 0 580 49144 734.00 members, 68.00 non-members
GEL/31/14
BS EN 62013-2:2006
Performance and other
safety-related matterssupersedes BS EN 62013-2:2001ISBN 0 580 49143 934.00 members, 68.00 non-members
GEL/31/14
BS EN 62153:-
Metallic communication cables test
methods
BS EN 62153-4-7:2006
Electromagnetic compatibility
(EMC). Test method for measuring
the transfer impedance and the
screening, or the coupling
attenuation. Tube in tube methodno current standard is supersededISBN 0 580 49312 156.00 members, 112.00 non-members
EPL/46
BS EN 62271:-
High-voltage switchgear and
controlgear
BS EN 62271-101:2006Synthetic testingsupersedes BS EN 60427:2001ISBN 0 580 49257 590.00 members, 180.00 non-members
PEL/17/1
BS EN 62305:-Protection against lightning
BS EN 62305-1:2006General requirements
supersedes BS 6651:1999 which remains currentISBN 0 580 48846 274.00 members, 148.00 non-members
GEL/81
BS EN 62305-2:2006Risk management
supersedes BS 6651:1999 which remains currentISBN 0 580 48848 996.00 members, 192.00 non-members
GEL/81
BS EN 62305-3:2006
Physical damage to structures and
life hazardsupersedes BS 6651:1999 which remains currentISBN 0 580 48849 796.00 members, 192.00 non-members
GEL/81
BS EN 62305-4:2006
Electrical and electronic systems
within structuressupersedes BS 6651:1999 which remains currentISBN 0 580 48847 078.00 members, 156.00 non-members
GEL/81
BS EN 62373:2006
Bias-temperature stability test for
metal-oxide, semiconductor,
field-effect transistors (MOSFET)no current standard is supersededISBN 0 580 49255 934.00 members, 68.00 non-members
EPL/47
BS EN 62395:-
Electrical resistance trace heating
systems for industrial and
commercial applications
BS EN 62395-1:2006General and testing requirementsno current standard is supersededISBN 0 580 49341 556.00 members, 112.00 non-members
PEL/27
BS EN 175301:-
Harmonized system of quality
assessment for electronic
components
Page 13 of 64BS EN PUBLICATIONS
-
BS EN 175301-803:2006
Detail specification: rectangular
connectors. Flat contacts, 0,8 mm
thickness, locking screw not
detachablesupersedes BS EN 175301-803:2000ISBN 0 580 49301 649.00 members, 98.00 non-members
EPL/48
BS ENs IMPLEMENTED BY AMENDMENTBS EN ISO 13802:2006
Plastics. Verification of pendulum
impact-testing machines. Charpy,
Izod and tensile impact-testing
Implementation of European
standard EN ISO 13802 by
amendment to BS ISO
13802:1999.
BS EN ISO 14663:-
Plastics. Ethylene/vinyl alcohol
(EVOH) copolymer moulding and
extrusion materials
BS EN ISO 14663-1:2006
Designation system and basis for
specifications
Implementation of European
standard EN ISO 14663-1 by
amendment to BS ISO
14463-1:1999.
BS EN ISO 19107:2005
Geographic information. Spatial
schema
Implementation of European
standard EN ISO 19107 by
amendment to BS ISO
19107:2003.
BS EN ISO 22867:2006
Forestry machinery. Vibration test
code for portable hand-held
machines with internal combustion
engine. Vibration at the handles
Implementation of European
standard EN ISO 22867 by
amendment to BS ISO
22867:2004.
DD CLC/TS 60034:-
Rotating electrical machines.
Functional evaluation of insulation
systems
DD CLC/TS 60034-18-34:2004
Functional evaluation of insulation
systems. Test procedures for
form-wound windings. Evaluation
of thermomechanical endurance of
insulation systems
Implementation of European
standard CLC/TS 60034-18-34 by
amendment to BS IEC TS
60034-18-34:2000.
BS EN 62086:-
Electrical apparatus for explosive
gas atmospheres. Electrical
resistance trace heating
BS EN 62086-2:2005
Application guide for design,
installation and maintenance
Implementation of European
standard EN 62086-2 by
amendment to BS IEC
62086-2:2001.
PD CEN ISO/TR 14969:2005
Medical devices. Quality
management systems. Guidance
on the application of ISO
13485:2003
Implementation of European
standard CEN ISO/TR 14969 by
amendment to PD ISO/TR
14969:2004.
BS IMPLEMENTATIONS
BS ISO 36:2005
Rubber, vulcanized or
thermoplastic. Determination of
adhesion to textile fabricssupersedes BS ISO 36:1999ISBN 0 580 49366 028.00 members, 56.00 non-members
PRI/22
BS ISO 1728:2006
Road vehicles. Pneumatic braking
connections between motor
vehicles and towed vehicles.
Interchangeabilityno current standard is supersededISBN 0 580 49248 628.00 members, 56.00 non-members
AUE/11
BS ISO 2834:-
Graphic technology. Laboratory
preparation test prints
BS ISO 2834-1:2006Paste inks
partially supersedes BS ISO 2834:1999ISBN 0 580 48899 328.00 members, 56.00 non-members
PAI/43
DD ISO/TS 2963:2006
Cheese and processed cheese
products. Determination of citric
acid content. Enzymatic methodsupersedes BS 770-7:1997ISBN 0 580 49110 217.00 members, 34.00 non-members
AW/5
BS ISO 3408:-Ball screws
BS ISO 3408-5:2006
Static and dynamic axial load
ratings and operational lifeno current standard is supersededISBN 0 580 49280 X34.00 members, 68.00 non-members
MTE/1
BS ISO 5496:2006
Sensory analysis. Methodology.
Initiation and training of assessors
in the detection and recognition of
odourssupersedes BS 5929-9:1992ISBN 0 580 49202 449.00 members, 98.00 non-members
AW/12
BS ISO 6336:-
Calculation of load capacity of spur
and helical gears
Page 14 of 64BS IMPLEMENTATIONS
-
BS ISO 6336-1:2006
Basic principles, introduction and
general influence factorssupersedes BS ISO 6336-1:1996ISBN 0 580 49372 578.00 members, 156.00 non-members
MCE/5
BS ISO 6336-2:2006
Calculation of surface durability
(pitting)supersedes BS ISO 6336-2:1996ISBN 0 580 49373 356.00 members, 112.00 non-members
MCE/5
BS ISO 6336-3:2006
Calculation of tooth bending
strengthsupersedes BS ISO 6336-3:1996ISBN 0 580 48980 968.00 members, 136.00 non-members
MCE/5
BS ISO 6980:-
Nuclear energy. Reference
beta-particle radiation
BS ISO 6980-1:2006Methods of production
partially supersedes BS ISO 6980:1996ISBN 0 580 48884 534.00 members, 68.00 non-members
NCE/2
BS ISO 7619:-
Rubber, vulcanized or
thermoplastic. Determination of
indentation hardness
BS ISO 7619-1:2004
Durometer method (Shore
hardness)supersedes BS 903-A57:1997ISBN 0 580 46734 134.00 members, 68.00 non-members
PRI/22
BS ISO 8535:-
Diesel engines. Steel tubes for
high-pressure fuel injection pipes
BS ISO 8535-1:2006
Requirements for seamless
cold-drawn single-wall tubessupersedes BS ISO 8535-1:1996ISBN 0 580 49249 434.00 members, 68.00 non-members
MCE/22
BS ISO 8829:-
Aerospace. Test methods for
polytetrafluoroethylene (PTFE)
inner-tube hose assemblies
BS ISO 8829-2:2006Non-metallic braidno current standard is supersededISBN 0 580 49346 649.00 members, 98.00 non-members
ACE/69
BS ISO 9679:2006
Aerospace. Clamps for fluid
systems. Test methodsno current standard is supersededISBN 0 580 49323 728.00 members, 56.00 non-members
ACE/69
BS ISO 10109:-
Optics and photonics.
Environmental requirements
BS ISO 10109-1:2006
General overview, terms and
definitions, climatic zones and their
parameterssupersedes BS ISO 10109-1:1994ISBN 0 580 49186 234.00 members, 68.00 non-members
CPW/172
BS ISO 10109-6:2005
Test requirements for medical
optical devicessupersedes BS ISO 10109-6:1994ISBN 0 580 49169 228.00 members, 56.00 non-members
CPW/172
BS ISO 10109-8:2005
Test requirements for extreme
conditions of usesupersedes BS ISO 10109-8:1994ISBN 0 580 49170 634.00 members, 68.00 non-members
CPW/172
BS ISO 10113:2006
Metallic materials. Sheet and strip.
Determination of plastic strain rationo current standard is supersededISBN 0 580 49267 234.00 members, 68.00 non-members
ISE/NFE/4/1
BS ISO 10469:2006
Copper sulfide concentrates.
Determination of copper.
Electrogravimetric methodno current standard is supersededISBN 0 580 49147 149.00 members, 98.00 non-members
NFE/36
BS ISO 10594:2006
Micrographics. Rotary camera
systems. Test target for checking
performancesupersedes BS ISO 10594:1997ISBN 0 580 49332 634.00 members, 68.00 non-members
IDT/1/1
DD ISO/TS 10993:-
Biological evaluation of medical
devices
DD ISO/TS 10993-20:2006
Principles and methods for
immunotoxicology testing of
medical devicesno current standard is supersededISBN 0 580 49228 128.00 members, 56.00 non-members
CH/194
Page 15 of 64BS IMPLEMENTATIONS
-
BS ISO 11464:2006
Soil quality. Pretreatment of
samples for physio-chemical
analysissupersedes BS 7755-3.5:1995ISBN 0 580 49365 234.00 members, 68.00 non-members
EH/4
BS ISO 11486:2006
Motorcycles. Methods for setting
the running resistance on a
chassis dynamometerno current standard is supersededISBN 0 580 48939 649.00 members, 98.00 non-members
AUE/14
BS ISO 12161:2006
Road vehicles. Endurance braking
systems of motor vehicles and
towed vehicles. Test proceduresno current standard is supersededISBN 0 580 49278 856.00 members, 112.00 non-members
AUE/11
BS ISO 12732:2006
Corrosion of metals and alloys.
Electrochemical potentiokinetic
reactivation measurement using
the double loop method (based on
Cihal's method)no current standard is supersededISBN 0 580 49277 X34.00 members, 68.00 non-members
ISE/NFE/8
BS ISO/IEC 13250:-
Information technology. Topic
maps
BS ISO/IEC 13250-2:2006Data modelno current standard is supersededISBN 0 580 48925 649.00 members, 98.00 non-members
IST/41
BS ISO/IEC 14764:2006
Software engineering. Software life
cycle processes. Maintenancesupersedes BS ISO/IEC 14764:1999ISBN 0 580 46596 968.00 members, 136.00 non-members
IST/15
BS ISO/IEC 16022:2006
Information technology. Automatic
identification and data capture
techniques. Data matrix bar code
symbology specificationsupersedes BS ISO/IEC 16022:2000ISBN 0 580 49371 790.00 members, 180.00 non-members
IST/34
BS ISO 16063:-
Methods for the calibration of
vibration and shock transducers
BS ISO 16063-15:2006
Primary angular vibration
calibration by laser interferometryno current standard is supersededISBN 0 580 49172 264.00 members, 128.00 non-members
GME/21/2
BS ISO 18283:2006
Hard coal and coke. Manual
samplingsupersedes BS 1017-1:1989 and BS 1017-2:1994 which remain currentISBN 0 580 49364 474.00 members, 148.00 non-members
PTI/16
BS ISO 18926:2006
Imaging materials. Information
stored on magneto-optical (MO)
discs. Method for estimating the life
expectancy based on the effects of
temperature and relative humidityno current standard is supersededISBN 0 580 49148 X49.00 members, 98.00 non-members
CPW/42
BS ISO 18933:2006
Imaging materials. Magnetic tape.
Care and handling practices for
extended usageno current standard is supersededISBN 0 580 49127 756.00 members, 112.00 non-members
CPW/42
BS ISO/IEC 19794:-
Information technology. Biometric
data interchange formats
BS ISO/IEC 19794-3:2006Finger pattern spectral datano current standard is supersededISBN 0 580 49200 168.00 members, 136.00 non-members
IST/44
BS ISO 20683:-
Aircraft ground equipment. Design,
test and maintenance for
towbarless towing vehicles (TLTV)
interfaced with nose-landing gear
BS ISO 20683-1:2005Main-line aircraftno current standard is supersededISBN 0 580 49226 549.00 members, 98.00 non-members
ACE/57
BS ISO 20683-2:2004Regional aircraftno current standard is supersededISBN 0 580 49227 334.00 members, 68.00 non-members
ACE/57
BS ISO 20998:-
Measurement and characterization
of particles by acoustic methods
BS ISO 20998-1:2006
Concepts and procedures in
ultrasonic attenuation
spectroscopyno current standard is supersededISBN 0 580 49269 949.00 members, 98.00 non-members
LBI/37
Page 16 of 64BS IMPLEMENTATIONS
-
BS ISO 21460:2006
Space data and information
transfer systems. Proximity-1
space link protocol. Physical layerno current standard is supersededISBN 0 580 49174 956.00 members, 112.00 non-members
ACE/68/-/7
DD ISO/TS 22028:-
Photography and graphic
technology. Extended colour
encodings for digital image
storage, manipulation and
interchange
DD ISO/TS 22028-2:2006
Reference output medium metric
RGB colour image encoding
(ROMM RGB)no current standard is supersededISBN 0 580 49207 928.00 members, 56.00 non-members
CPW/42
DD ISO/TS 22028-3:2006
Reference input medium metric
RGB colour image encoding
(RIMM RGB)no current standard is supersededISBN 0 580 49275 328.00 members, 56.00 non-members
CPW/42
BS ISO 22768:2006
Rubber, raw. Determination of the
glass transition temperature by
differential scanning calorimetry
(DSC)no current standard is supersededISBN 0 580 49128 528.00 members, 56.00 non-members
PRI/23
BS ISO 23509:2006Bevel and hypoid gear geometryno current standard is supersededISBN 0 580 47082 290.00 members, 180.00 non-members
MCE/5
BS ISO/IEC 25062:2006
Software engineering. Software
product. Quality requirements and
evaluation (SQuaRE). Common
industry format (CIF) for usability
test reportsno current standard is supersededISBN 0 580 47058 X68.00 members, 136.00 non-members
IST/15
PUBLISHED DOCUMENTS
PD CEN/TR 15298:2006
Foodstuffs. Sample comminution
for mycotoxins analysis.
Comparison between dry milling
and slurry mixingno current standard is supersededISBN 0 580 49336 934.00 members, 68.00 non-members
AW/-/3
PD ISO/TR 9212:2006
Hydrometry. Measurement of liquid
flow in open channels. Methods of
measurement of bedload dischargeno current standard is supersededISBN 0 580 49168 449.00 members, 98.00 non-members
CPI/113
PD ISO/TR 18394:2006
Surface chemical analysis. Auger
electron spectroscopy. Derivation
of chemical informationno current standard is supersededISBN 0 580 49310 549.00 members, 98.00 non-members
CII/60
PD ISO/TR 25599:2006
Cranes. Jib cranes. International
standards for design,
manufacturing, use and
maintenance requirements and
recommendationsno current standard is supersededISBN 0 580 49286 934.00 members, 68.00 non-members
MHE/3/3
PD IEC/TR 60825:-Safety of laser products
PD IEC/TR 60825-13:2006
Measurements for classification of
laser productsno current standard is supersededISBN 0 580 49291 556.00 members, 112.00 non-members
EPL/76
PUBLICLY AVAILABLE SPECIFICATIONSPAS 83:2006
Guidance on codes of practice,
standardised methods and
regulations for cell-based
therapeutics from basic research
to clinical applicationno current standard is supersededISBN 0 580 49088218.00 members, 18.00 non-members
PAS 2010:2006
Planning to halt the loss of
biodiversityno current standard is supersededISBN 0 580 48844 612.00 members, 12.00 non-members
PAS 11000:2006
Collaborative business
relationships. A framework
specificationno current standard is supersededISBN 0 580 49520 550.00 members, 50.00 non-members
SPECIALIST BOOKS FROM BSIBIP 2117:2006
The waste electrical and electronic
equipment directive. A survey of
requirements and implementationno current standard is supersededISBN 0 580 49271 0225.00 members, 225.00 non-membersSubscription service includes 12
months free updates.
Page 17 of 64SPECIALIST BOOKS FROM BSI
-
BIP 2121:2006
A risk management approach to
business continuity. Aligning
business continuity with corporate
governanceno current standard is supersededISBN 1 931 33236 355.00 members, 55.00 non-members
KITS, SETS, PACKS AND SERIESKIT 194
BS ISO/IEC 18028 IT network
security kitno current standard is supersededISBN 0 580 49316 4226.00 members, 452.00 non-membersSpecial offer. Includes BS ISO/IEC
18028-1, BS ISO/IEC 18028-2, BS
ISO/IEC 18028-3, BS ISO/IEC
18028-4 and BS ISO/IEC 18028-5.
KIT 196
Fire books promotion. Fire
detection and fire alarm systems
for buildingsno current standard is supersededISBN 0 580 49406 381.00 members, 81.00 non-membersSpecial offer. Includes BIP 2109
and BIP 2044.
AMENDMENTS TO BRITISH STANDARDSBS 2819:1990
Methods for determination of bow,
skew and lengthway distortion in
woven and knitted fabricsAMENDMENT 1 AMD 16629
TCI/24
BS 2869:2006
Fuel oils for agricultural, domestic
and industrial engines and boilers.
SpecificationCORRIGENDUM 1 AMD 16678
PTI/2
BS 3790:2006
Specification for belt drives.
Endless wedge belts, endless
V-belts, banded wedge belts,
banded V-belts and their
corresponding pulleysCORRIGENDUM 1 AMD 16655
MCE/10
BS 6231:2006
Electric cables. Single core PVC
insulated flexible cables of rated
voltage 600/1000 V for switchgear
and controlgear wiringCORRIGENDUM 1 AMD 16677
GEL/20/17
BS 6400:-
Specification for installation,
exchange, relocation and removal
of gas meters with a maximum
capacity not exceeding 6 m$u3/h
BS 6400-1:2006Low pressure (2nd family gases)CORRIGENDUM 1 AMD 16685
GSE/30/-/2
BS 6500:2000
Electric cables. Flexible cords
rated up to 300/500 V, for use with
appliances and equipment
intended for domestic, office and
similar environmentsCORRIGENDUM 2 AMD 16644
GEL/20/17
Also incorporates Amendments 1,
2 & 3 and Corrigendum 1.
BS 7800:2006
Automotive fuel. High octane
(super) unleaded petrol.
SpecificationCORRIGENDUM 1 AMD 16679
PTI/2
BS EN 54:-
Fire detection and fire alarm
systems
BS EN 54-10:2002Flame detectors. Point detectorsCORRIGENDUM 1 AMD 16593
FSH/12Also incorporates Amendment 1.
BS EN 326:-
Wood-based panels. Sampling,
cutting and inspection
BS EN 326-2:2000Quality control in the factoryCORRIGENDUM 2 AMD 16562
B/541Also incorporates Corrigendum 1.
BS EN 1492:-Textile slings. Safety
BS EN 1492-1:2000
Flat woven webbing slings, made
of man-made fibres, for general
purpose useCORRIGENDUM 1 AMD 16578
MHE/15
BS EN 1492-2:2000
Roundslings, made of man-made
fibres, for general purpose useCORRIGENDUM 1 AMD 16577
MHE/15
BS EN 1504:-
Products and systems for the
protection and repair of concrete
structures. Definitions.
Requirements. Quality control and
evaluation of conformity
BS EN 1504-10:2003
Site application of products and
systems and quality control of the
worksCORRIGENDUM 1 AMD 16560
B/517/8
BS EN 1888:2003
Child care articles. Wheeled child
conveyances. Safety requirements
and test methodsCORRIGENDUM 3 AMD 16707
CW/39
Also incorporates Amendment 1
and Corrigenda 1 & 2.
BS EN 1993:-
Eurocode 3: Design of steel
structures
BS EN 1993-1-1:2005
General rules and rules for
buildingsCORRIGENDUM 1 AMD 16568
B/525/31Page 18 of 64AMENDMENTS TO BRITISH STANDARDS
-
BS EN 1993-1-2:2005
General rules. Structural fire
designCORRIGENDUM 2 AMD 16572
B/525/31Also incorporates Corrigendum 1.
BS EN 1993-1-8:2005Design of jointsCORRIGENDUM 2 AMD 16571
B/525/31Also incorporates Corrigendum 1.
BS EN 1993-1-9:2005FatigueCORRIGENDUM 2 AMD 16570
B/525/31Also incorporates Corrigendum 1.
BS EN 1993-1-10:2005
Material toughness and
through-thickness propertiesCORRIGENDUM 2 AMD 16569
B/525/31Also incorporates Corrigendum 1.
BS EN 3475:-
Aerospace series. Cables,
electrical, aircraft use. Test
methods
BS EN 3475-203:2006DimensionsCORRIGENDUM 1 AMD 16691
ACE/6/-/2
BS EN ISO 8835:-Inhalational anaesthesia systems
BS EN ISO 8835-4:2004
Anaesthetic vapour delivery
devicesCORRIGENDUM 1 AMD 16251
CH/121/1
BS EN ISO 8835-5:2004Anaesthetic ventilatorsCORRIGENDUM 2 AMD 16238
CH/121/1Also incorporates Corrigendum 1.
BS EN ISO 9875:2002
Ships and marine technology.
Marine echo-sounding equipmentTECHNICAL CORRIGENDUM 1 AMD 16278
EPL/80
BS EN 10277:-
Bright steel products. Technical
delivery conditions
BS EN 10277-2:1999
Steels for general engineering
purposesCORRIGENDUM 1 AMD 16638
ISE/31
BS EN 12101:-Smoke and heat control systems
BS EN 12101-1:2006Specification for smoke barriersAMENDMENT 1 AMD 16507
FSH/25
BS EN 12235:2004
Surfaces for sports areas.
Determination of vertical ball
behaviourCORRIGENDUM 1 AMD 16643
PRI/57
BS EN 12548:1999
Lead and alloys. Lead alloy ingots
for electric cable sheathing and for
sleevesCORRIGENDUM 2 AMD 16645
NFE/22Also incorporates Corrigendum 1.
BS EN 13480:-Metallic industrial piping
BS EN 13480-4:2002Fabrication and installationCORRIGENDUM 2 AMD 16636
PVE/10Also incorporates Corrigendum 1.
BS EN 13480-5:2002Inspection and testingCORRIGENDUM 2 AMD 16637
PVE/10Also incorporates Corrigendum 1.
BS EN 13481:-
Railway applications. Track.
Performance requirements for
fastening systems
BS EN 13481-5:2002Fastening systems for slab trackAMENDMENT 1 AMD 16591
RAE/2/-/5
BS EN 13616:2004
Overfill prevention devices for
static tanks for liquid petroleum
fuelsCORRIGENDUM 1 AMD 16287
PVE/21
BS EN 13732:2002
Food processing machinery. Bulk
milk coolers on farms.
Requirements for construction,
performance, suitability for use,
safety and hygieneAMENDMENT 1 AMD 16141
AW/24
BS EN 14197:-
Cryogenic vessels. Static
non-vacuum insulated vessels
BS EN 14197-3:2004Operational requirementsAMENDMENT 1 AMD 15894
PVE/18Also incorporates Corrigendum 1.
BS EN ISO 14419:1999
Textiles. Oil repellency.
Hydrocarbon resistance testCORRIGENDUM 1 AMD 16551
TCI/82
BS EN ISO 15156:-
Petroleum, petrochemical and
natural gas industries. Materials for
use in H$d2S-containing
environments in oil and gas
production
BS EN ISO 15156-2:2003
Cracking resistant carbon and low
alloy steels, and the use of cast
ironsCORRIGENDUM 1 AMD 16392
PSE/17
BS EN ISO 15156-3:2003
Cracking-resistant CRAs
(corrosion-resistant alloys) and
other alloysCORRIGENDUM 1 AMD 16391
PSE/17
BS EN 50341:-
Overhead electrical lines
exceeding A.C. 45 Kv
Page 19 of 64AMENDMENTS TO BRITISH STANDARDS
-
BS EN 50341-3:2001Set of national normative aspectsCORRIGENDUM 1 AMD 16511
PEL/11
BS EN 50360:2001
Product standard to demonstrate
the compliance of mobile phones
with the basic restrictions related to
human exposure to
electromagnetic fields (300 MHz -
3 GHz)CORRIGENDUM 1 AMD 16564
GEL/106
BS EN 55013:2001
Sound and television broadcast
receivers and associated
equipment. Radio disturbance
characteristics. Limits and methods
of measurementAMENDMENT 2 AMD 16532
GEL/210/11
Also incorporates Amendment 1
and Corrigendum 1.
BS EN 60034:-Rotating electrical machines
BS EN 60034-1:2004Rating and performanceAMENDMENT 1 AMD 16646
PEL/2
BS EN 60335:-
Household and similar electrical
appliances. Safety
BS EN 60335-2:-Particular requirements
BS EN 60335-2-4:2002Spin extractorsAMENDMENT 2 AMD 16620
CPL/61/14Also incorporates Amendment 1.
BS EN 60335-2-9:2003
Grills, toasters and similar portable
cooking appliancesAMENDMENT 2 AMD 16523
CPL/61/07Also incorporates Amendment 1.
BS EN 60335-2-43:2003
Appliances for clothes dryers and
towel railsAMENDMENT 1 AMD 1637734.00 members, 68.00 non-members
CPL/61/07
BS EN 60695:-Fire hazard testing. Abnormal heat
BS EN 60695-10-2:2003Ball pressure testCORRIGENDUM 1 AMD 1630234.00 members, 68.00 non-members
GEL/89
BS EN 60730:-
Automatic electrical controls for
household and similar use
BS EN 60730-2-18:1999
Particular requirements for
automatic electrical water and air
flow sensing controls, including
mechanical requirementsAMENDMENT 1 AMD 1574349.00 members, 98.00 non-members
CPL/72
BS EN 60745:-
Hand-held motor-operated electric
tools. Safety
BS EN 60745-2-6:2003
Particular requirements for
hammersAMENDMENT 1 AMD 16524
CPL/61/6
BS EN 60921:2004
Ballasts for tubular fluorescent
lamps. Performance requirementsAMENDMENT 1 AMD 16527
CPL/34/3
BS EN 61000:-
Electromagnetic compatibility
(EMC)
BS EN 61000-6-2:2001
Generic standards. Immunity for
industrial environmentsCORRIGENDUM 1 AMD 16351
GEL/210/12
BS EN 61347:-Lamp controlgear
BS EN 61347-2-2:2001
Particular requirements for D.C. or
A.C. supplied electronic step-down
convertors for filament lampsAMENDMENT 2 AMD 16530
CPL/34/3
Also incorporates Amendment 1
and Corrigendum 1.
BS EN 61996:-
Maritime navigation and
radiocommunication equipment
and systems. Shipborne voyage
data recorder (VDR)
BS EN 61996-2:2006
Simplified voyage data recorder
(S-VDR). Performance
requirements, methods of testing
and required test resultsCORRIGENDUM 1 AMD 16557
EPL/80
BS IEC TS 60034:-Rotating electrical machines
BS IEC TS 60034-18-34:2000
Functional evaluation of insulation
systems. Test procedures for
form-wound windings. Evaluation
of thermomechanical endurance of
insulation systemsAMENDMENT 1 AMD 16621
PEL/2
Renumbered as DD CLC/TS
60034-18-34:2004.
BS IEC 62086:-
Electrical apparatus for explosive
gas atmospheres. Electrical
resistance trace heating
BS IEC 62086-2:2001
Application guide for design,
installation and maintenanceAMENDMENT 1 AMD 16068
GEL/31/14
Renumbered as BS EN
62086-2:2005.
Page 20 of 64AMENDMENTS TO BRITISH STANDARDS
-
BS ISO 5495:2005
Sensory analysis. Methodology.
Paired comparison testTECHNICAL CORRIGENDUM 1 AMD 16563
AW/12
BS ISO 5751:-
Motorcycle tyres and rims (metric
series)
BS ISO 5751-1:2004Design guidesCORRIGENDUM 1 AMD 16538
AUE/4
BS ISO/IEC 9541:-
Information technology. Font
information interchange
BS ISO/IEC 9541-3:1994Glyph shape representationAMENDMENT 1 AMD 15966
IST/41
BS ISO 11783:-
Tractors and machinery for
agriculture and forestry. Serial
control and communications data
network
BS ISO 11783-2:2002Physical layerAMENDMENT 1 AMD 16555
AGE/6Also incorporates Corrigendum 1.
BS ISO 13802:1999
Plastics. Verification of pendulum
impact-testing machines. Charpy,
Izod and tensile impact-testingAMENDMENT 1 AMD 16022
PRI/82
Renumbered as BS EN ISO
13802:2006. Also incorporates
Technical Corrigendum 1.
BS ISO 14663:-
Plastics. Ethylene/vinyl alcohol
(EVOH) copolymer moulding and
extrusion materials
BS ISO 14663-1:1999
Designation system and basis for
specificationsAMENDMENT 1 AMD 16028
PRI/82
Renumbered as BS EN ISO
14663-1:2006.
BS ISO 19107:2003
Geographic information. Spatial
schemaAMENDMENT 1 AMD 15563
IST/36
Renumbered as BS EN ISO
19107:2005.
BS ISO 22867:2004
Forestry machinery. Vibration test
code for portable hand-held
machines with internal combustion
engine. Vibration at the handlesTECHNICAL CORRIGENDUM 1 AMD 16536
AGE/29
Renumbered as BS EN ISO
22867:2006.
PD 5500:2006
Specification for unfired fusion
welded pressure vesselsAMENDMENT 1 AMD 16422
PVE/1Effective from January 2007.
PD ISO/TR 14969:2004
Medical devices. Quality
management systems. Guidance
on the application of ISO
13485:2003AMENDMENT 1 AMD 15958
CH/210/1
Renumbered as PD CEN ISO/TR
14969:2005.
UPDATED BRITISH STANDARDSBS 3449:1990
Method for resistance of fabrics to
water absorption (static immersion
test)AMENDMENT 228.00 members, 56.00 non-members
TCI/24Also incorporates Amendment 1.
BS 4438:1969
Specification for filing cabinets and
suspended filing pocketsAMENDMENT 228.00 members, 56.00 non-members
FW/0Also incorporates Amendment 1.
BS 6811:-Winding wires
BS 6811-4.5:-
Specifications for particular types
of enamelled rectangular copper
winding wires. Polyvinyl acetal
enamelled rectangular copper wire,
class 105See BS EN 60317-17.
BS 6891:2005
Installation of low pressure gas
pipework of up to 35 mm (R1$9D)
in domestic premises (2nd family
gas). SpecificationAMENDMENT 156.00 members, 112.00 non-members
GSE/30/-/3Also incorporates Corrigendum 1.
BS 7609:1992
Code of practice for installation and
inspection of uninsulated
compression and mechanical
connectors for power cables with
copper or aluminium conductorsAMENDMENT 134.00 members, 68.00 non-members
GEL/20/11
BS 7727:1994
Code of practice for installation and
inspection of pre-insulated
compression terminals and
connectors for cables with copper
conductors up to 6 mm$u2AMENDMENT 134.00 members, 68.00 non-members
GEL/20/11
Page 21 of 64UPDATED BRITISH STANDARDS
-
BS EN 215:2004
Thermostatic radiator valves.
Requirements and test methodsAMENDMENT 156.00 members, 112.00 non-members
RHE/16
BS EN 352:-
Hearing protectors. Safety
requirements and testing
BS EN 352-5:2002Active noise reduction ear muffsAMENDMENT 134.00 members, 68.00 non-members
PH/7
BS EN 656:2000
Gas-fired central heating boilers.
Type B boilers of nominal heat
input exceeding 70 kW, but not
exceeding 300 kWAMENDMENT 178.00 members, 156.00 non-members
GSE/29
BS EN ISO 772:2001
Hydrometric determinations.
Vocabulary and symbolsAMENDMENT 296.00 members, 192.00 non-members
CPI/113Also incorporates Amendment 1.
BS EN 1930:2000
Child care articles. Safety barriers.
Safety requirements and test
methodsAMENDMENT 149.00 members, 98.00 non-members
CW/41
BS EN ISO 4589:-
Plastics. Determination of burning
behaviour by oxygen index
BS EN ISO 4589-2:1999(BS ISO 4589-2:1996)Ambient-temperature testAMENDMENT 249.00 members, 98.00 non-members
PRI/26
Also incorporates Amendment 1 (to
BS ISO 4589-2:1996).
BS EN ISO 10993:-
Biological evaluation of medical
devices
BS EN ISO 10993-10:2002
Tests for irritation and delayed-type
hypersensitivityAMENDMENT 168.00 members, 136.00 non-members
CH/194Also incorporates Corrigendum 1.
BS EN 12261:2002Gas meters. Turbine gas metersAMENDMENT 168.00 members, 136.00 non-members
GSE/25Also incorporates Corrigendum 1.
BS EN 12735:-
Copper and copper alloys.
Seamless, round copper tubes for
air conditioning and refrigeration
BS EN 12735-1:2001Tubes for piping systemsAMENDMENT 134.00 members, 68.00 non-members
NFE/34/1
BS EN 13146:-
Railway applications. Track. Test
methods for fastening systems
BS EN 13146-8:2002In service testingAMENDMENT 128.00 members, 56.00 non-members
RAE/2/-/5
BS EN 13414:-Steel wire rope slings. Safety
BS EN 13414-1:2003Slings for general lifting serviceAMENDMENT 149.00 members, 98.00 non-members
MHE/2
BS EN 13481:-
Railway applications. Track.
Performance requirements for
fastening systems
BS EN 13481-2:2002
Fastening systems for concrete
sleepersAMENDMENT 134.00 members, 68.00 non-members
RAE/2/-/5
BS EN 13481-3:2002
Railway applications. Track.
Performance requirements for
fastening systems. Fastening
systems for wood sleepersAMENDMENT 128.00 members, 56.00 non-members
RAE/2/-/5
BS EN 13914:-
Design, preparation and
application of external rendering
and internal plastering
BS EN 13914-2:2005
Design considerations and
essential principles for internal
plasteringAMENDMENT 149.00 members, 98.00 non-members
B/544/4
BS EN ISO 14556:2000
Steel. Charpy V-notch pendulum
impact test. Instrumented test
methodAMENDMENT 149.00 members, 98.00 non-members
ISE/NFE/4/4
BS EN 60065:2002
Audio, video and similar electronic
apparatus. Safety requirementsAMENDMENT 196.00 members, 192.00 non-members
EPL/108Also incorporates Corrigendum 1.
BS EN 60317:-
Specifications for particular types
of winding wire
Page 22 of 64UPDATED BRITISH STANDARDS
-
BS EN 60317-17:1996(BS 6811-4.5:1993)
Polyvinyl acetal enamelled
rectangular copper wire, class 105AMENDMENT 328.00 members, 56.00 non-members
GEL/55
Also incorporates Amendments 1
(to BS 6811-4.5:1993) & 2.
BS EN 60335:-
Household and similar electrical
appliances. Safety
BS EN 60335-2:-Particular requirements
BS EN 60335-2-31:2003Range hoodsAMENDMENT 134.00 members, 68.00 non-members
CPL/61/01Also incorporates Corrigendum 1.
BS EN 60335-2-76:2005Electric fence energizersAMENDMENT 164.00 members, 128.00 non-members
CPL/61/01
BS EN 60730:-
Automatic electrical controls for
household and similar use
BS EN 60730-2-5:2002
Particular requirements for
automatic electrical burner control
systemsAMENDMENT 268.00 members, 136.00 non-members
CPL/72Also incorporates Amendment 1.
BS EN 60898:-
Electrical accessories.
Circuit-beakers for overcurrent
protection for household and
similar installations
BS EN 60898-1:2003Circuit breakers for A.C. operationAMENDMENT 190.00 members, 180.00 non-members
PEL/23/1
BS EN 60947:-
Low voltage switchgear and
controlgear
BS EN 60947-3:1999
Switches, disconnectors,
switch-disconnectors and
fuse-combination unitsAMENDMENT 268.00 members, 136.00 non-members
PEL/17/2
Also incorporates Amendment 1
and Corrigendum 1.
BS EN 60947-4-1:2001
Contactors and motor-starters.
Electromechanical contactors and
motor-startersAMENDMENT 278.00 members, 156.00 non-members
PEL/17/2
Also incorporates Amendment 1
and Corrigendum 1.
BS EN 60947-5-5:1998
Control circuit devices and
switching elements. Electrical
emergency stop devices with
mechanical latching functionAMENDMENT 134.00 members, 68.00 non-members
PEL/17/2
BS EN 61347:-Lamp controlgear
BS EN 61347-2-9:2001
Particular requirements for ballasts
for discharge lamps (excluding
fluorescent lamps)AMENDMENT 249.00 members, 98.00 non-members
CPL/34/3
Also incorporates Amendment 1
and Corrigendum 1.
BS EN 61754:-Fibre optic connector interfaces
BS EN 61754-6:1997Type MU connector familyAMENDMENT 268.00 members, 136.00 non-members
GEL/86/2Also incorporates Amendment 1.
BS EN 62020:1999
Electrical accessories. Residual
current monitors for household and
similar uses (RCMs)AMENDMENT 174.00 members, 148.00 non-members
PEL/23/1
BS ISO 4589:-
Plastics. Determination of burning
behaviour by oxygen index
BS ISO 4589-2:-Ambient-temperature test
See BS EN ISO 4589-2.
BS ISO 4658:1999
Acrylonitrile-butadiene rubber
(NBR). Evaluation procedureAMENDMENT 134.00 members, 68.00 non-members
PRI/50
BS ISO/IEC 18000:-
Information technology. Radio
frequency identification for item
management
BS ISO/IEC 18000-6:2004
Parameters for air interface
communications at 860 MHz to 960
MHzAMENDMENT 190.00 members, 180.00 non-members
IST/34
SPECIAL ANNOUNCEMENTS
PAS 125:2007Vehicle body repair
This Publicly Available
Specification was commissioned
by Thatcham/BSI Product Services
and comes into effect on 1
January, 2007. Please note it will
be available to purchase in hard
copy from November 2006.Page 23 of 64SPECIAL ANNOUNCEMENTS
-
BRITISH STANDARDS PROPOSED FOR CONFIRMATIONBS ISO 11003:-Adhesives cylinders
BS ISO 11003-1:2001
Determination of shear behaviour
of structural adhesives. Torsion
test method using butt-bonded
hollow cylindersPRI/52
BS ISO 11003-2:2001
Determination of shear behaviour
of structural adhesives. Tensile
test method using thick adherendsPRI/52
BS ISO 15509:2001
Adhesives. Determination of the
bond strength of
engineering-plastic jointsPRI/52
BRITISH STANDARDS REVIEWED AND CONFIRMEDBS 544:1969
Specification for linseed oil putty
for use in wooden framesB/547
BS 669:-
Flexible hoses, end fittings and
sockets for gas burning appliances
BS 669-2:1997
Specification for corrugated
metallic flexible hoses, covers, end
fittings and sockets for catering
appliances burning 1st, 2nd and
3rd family gasesGSE/1
BS 812:-Testing aggregates
BS 812-103.2:1989
Method for determination of
particle size distribution.
Sedimentation testB/502/6
BS 812-123:1999
Method for determination of
alkali-silica reactivity. Concrete
prism methodB/502/6
BS 3143:-Road danger lamps
BS 3143-2:1990
Specification for low-intensity
battery-operated lampsB/509
BS 3143-4:1985
Specification for high intensity
battery operated beaconsB/509
BS 3712:-Building and construction sealants
BS 3712-1:1991
Methods of test for homogeneity,
relative density and penetrationB/547
BS 3712-2:1973
Methods of test for seepage,
staining, shrinkage, shelf life and
paintabilityB/547
BS 3712-3:1974
Methods of test for application life,
skinning properties and tack-free
timeB/547
BS 3712-4:1991Method of test for adhesion in peel
B/547
BS 3868:1995
Specification for prefabricated
drainage stack units in galvanized
steelISE/8
BS 4285:-
Microbiological examination for
dairy purposes
BS 4285-2.3:1984
Methods of general application for
enumeration of microorganisms.
Enumeration of microorganisms by
surface plate technique for colony
countAW/9
BS 5482:-
Domestic butane- and
propane-gas-burning installations
BS 5482-2:1977
Installations in caravans and
non-permanent dwellingsGSE/31
BS 5655:-Lifts and service lifts
BS 5655-7:1983
Specification for manual control
devices, indicators and additional
fittingsMHE/4
BS 5655-9:1985Specification for guide rails
MHE/4
BS 5655-14:1995
Specification for hand-powered
service lifts and platform hoistsMHE/4
BS 5656:-
Safety rules for the construction
and installation of escalators and
passenger conveyors
BS 5656-1:1997
Specification and proformas for
test and examination of new
installationsMHE/4
BS 5776:1996Specification for powered stairlifts
MHE/4
BS 5900:1999
Specification for powered domestic
lifts with partially enclosed cars and
no lift-well enclosuresMHE/4
Page 24 of 64BRITISH STANDARDS REVIEWED AND CONFIRMED
-
BS 5965:1980
Specification for manually driven
balanced personal homeliftsMHE/4
BS 6213:2000
Selection of construction sealants.
GuideB/547
BS 6767:-
Transportable accommodation
units
BS 6767-1:1999
Recommendations for design and
construction of the basic unitB/511/1
BS 6770:1988
Guide for exterior colours for park
homes (mobile homes), holiday
caravans and transportable
accommodation unitsB/511
BS 7838:1996
Specification for corrugated
stainless steel semi-rigid pipe and
associated fittings for low-pressure
gas pipework of up to 28 mmGSE/1
BS EN ISO 9455:-Soft soldering fluxes. Test methods
BS EN ISO 9455-16:2001
Flux efficacy tests, wetting balance
methodNFE/27/4
BS EN 61466:-
Composite string insulator units for
overhead lines with a nominal
voltage greater than 1000 V
BS EN 61466-1:1997
Standard strength classes and end
fittingsPEL/36
BS EN 61466-2:1999
Dimensional