85000-115 TECH M2 8 x 11 09182013 - SPD Sales Limited -...
-
Upload
truongdang -
Category
Documents
-
view
214 -
download
0
Transcript of 85000-115 TECH M2 8 x 11 09182013 - SPD Sales Limited -...
Applications:
NEMA 4X
Patents: 4,496,295 7,001,153 and other patents pending
! Municipal Water Treatment
! Municipal Wastewater Treatment
! Chemical Metering
! Chlorination
! Chloramination
! Fluoridation
! Polymer Injection
! Acid Injection
! Alum Injection
! PAC Injection
! Caustic Injection
Features:
5 Year Warranty
FLEX-PRO M-2
Variable Speed DC Motor
200:1 Turndown ratio
Engineering and Technical Data
ProSeries-Ms Peristaltic Metering Pumps
NEMA 4X (IP 66) Washdown Duty
1 of 6
Tube Failure Detection System
Tube life hour counter
NSF Listed Std. 61
s
Sold and serviced exclusively by highly skilled, factory authorized technicians.
Feed Rates to 14.9 GPH (56.2 LPH)
Pressures to 125 PSI
4-20mA, Pulse Input and Manual Speed Control
! Peristaltic pump design does not have valves that can clog requiring maintenance.
! Self priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock, or lose prime. Does not permit syphoning.
! Output rates to: 14.9 GPH (56.2 LPH) and pressures to 125 PSI (8.6 Bar).
! Variable speed DC motor.
! Specially engineered tubing for long life at high pressures. Meets FDA 21 CFR requirements for food contact applications.
! Patented Tube Failure Detection (TFD) system. Senses tube failure by detecting chemical in the pump head. No false triggering.
! 200:1 turndown ratio.
! Inputs: Optional
communications availble: Profibus DPV1, Modbus RTU, Modbus-TCP, EtherNet/IP, and Profinet RT I/O.
! Backlit LCD displays motor speed, input signal values, tube life timer, service and alarm status.
! Outputs: one 250V/6A relay to monitor TFD (Tube Failure System) and FVS (Flow Verification System), and 4-20mA analog signal scalable to the motor speed.
! Two CNC precision machined squeeze rollers and two alignment rollers for optimum squeeze, unparalleled accuracy, and tube life.
! Heavy duty rotor - single piece plastic rotor means no flexing and increased accuracy with no metal springs or hinges to corrode.
! Inject at maximum pressure in either direction (clockwise and counter clockwise).
! Compatible with Blue-White’s output Flow Verification Sensor (FVS) system. Sensor is sold separately.
4-20mA and pulse inputs for remote external speed control and either powered 6-24 VDC or non-powered dry contact closure for remote start/stop.
ProSeries-Mby Blue-White Ind.
s
Optional Modbus, Profibus, Industrial Ethernet
TDS #85000-115 rev. 09182013
Engineering and Technical Data
2 of 6
s FLEX-PRO ProSeries-Ms Peristaltic Metering Pumps
Engineering Specifications:
Materials of Construction:Wetted components: Non-Wetted components:
Enclosure:413 Aluminum (Polyester powder coated)
Pump Head:q Valox (PBT) thermoplastic
Pump Head Cover:Clear Acrylic - Annealed for added strength and chemical resistance.Permanently lubricated sealed motor shaft support ball bearing.
Cover Screws:Stainless Steel
Roller Assembly:q Rotor: ..................................Valox (PBT)
Rollers: ...............................Nylon Roller Bearings: .................SS Ball Bearings Roller Shaft: ........................316 Stainless Steel
Motor Shaft:Chrome plated steel
TFD System Sensor pins:Hastelloy C-276
Power Cord:3 conductor, SJTW-A Water-resistant
Tube Installation Tool:Glass Filled Nylon
Mounting Brackets and Hardware:316 Stainless Steel
Pump Tube Assembly (Model Specific - 2 provided):q q q Tubing: . . . . . Norprene or Norprene Chemical or Tygothane
Adapter fittings: .PVDF
Recommended Ancillary Items Sold Separately:
Injection / Back-flow Check valve: Body & insert: . . . . . . PVDF Check Ball: . . . . . . . . Ceramic Spring: . . . . . . . . . . Hastelloy C-276 Ball Seat O-ring: . . . . . FKM (optional EP) Static Seal O-ring: . . . . FKM (optional EP)
q Duckbill anti-scale valve: Santoprene
For “S” tubing type connections only: Suction Tubing: . . . . . 3/8” OD x 1/4” ID x 10’ Clear PVC Discharge Tubing: . . . . 3/8” OD x 1/4” ID x 10’ Polyethylene (LLDPE) Suction Strainer: . . . . . Polypropylene
For “M” M/NPT connections only:Suction Strainer: Body: . . . . . . . . . . . . . . . . . PVDF Check Ball: . . . . . . . . . . . . Ceramic Ball Seat O-ring: . . . . . . . . FKM (optional EP)
For “C” Tri-clamp connections only:none
Motor:Brushed DC, 1/8 H.P.
Duty cycle:Continuous
Motor speed adjustment range 200:1:0.5% - 100% motor speed (0.7 to 130 RPM)
Motor speed adjustment resolution:0.1% increments
DisplayBacklit LCD, UV resistant.
KeypadEight button positive action tactile switch keypad.
Enclosure:NEMA 4X (IP66), Polyester powder coated aluminum. Maximum Overall Dimensions: 7-1/2” W x 10-1/4” H x 14” D (19 W x 26 H x 35.6 D cm)
Product weight:28.4lb. (12.9 Kg)
Approximate shipping wt:35 lb. (15.9 Kg)
Maximum working pressure (excluding pump tubes):125 psig (8.6 bar)Note: see individual pump tube assembly maximum pressure ratings.
Maximum Fluid temperature (excluding pump tubes):o o3/8” OD x 1/4” ID tubing connections: 130 F (54 C)
o oM/NPT connections: 185 F (85 C)Note: see individual pump tube assembly maximum temperature ratings.
Maximum fluid viscosity:12,000 Centipoise
Maximum suction lift:30 ft. of water at sea level (14.7 atm psi)
Ambient Operating TemperatureO O O O14 F to 115 F (-10 C to 46 C)
Ambient Storage TemperatureO O O O-40 F to 158 F (-40 C to 70 C)
Operating Voltage:115VAC/60Hz, 1ph (1.5 Amp Maximum)230VAC/60Hz, 1ph (0.7 Amp Maximum)220VAC/50Hz, 1ph (1.0 Amp Maximum)240VAC/50Hz, 1ph (1.0 Amp Maximum)
Power Cord Options:115V60Hz = NEMA 5/15 (USA)230V60Hz = NEMA 6/15 (USA)220V50Hz = CEE 7/VII (EU)240V50Hz = AS 3112 (Australia/New Zealand)
TDS #85000-115 rev. 09182013
Engineering and Technical Data
3 of 6
Output Specifications:
s FLEX-PRO ProSeries-Ms Peristaltic Metering Pumps
®Tygothane M-2 Tube Pumps Meets FDA criteria for food | Resistant to oils, greases and fuels
GPH
.02 - 4.0
.05 - 9.3
LPH
.08 - 15.2
.17 - 35.2
ML/Min
1 - 2533 - 587
RPM
130130
115V AC
24-*GE24-*GG
M-2M-2
230V AC
25-*GE25-*GG
M-2M-2
220V AC
26-*GE26-*GG
M-2M-2
®Norprene Chemical M-2 Tube Pumps Meets FDA criteria for food | Superb chemical resistance
LPH
.28 - 56.2
230V AC
25-*M-2 TH
115V AC
24-*M-2 TH
GPH
.07 - 14.9
220V AC
26-*M-2 TH
ML/Min
5 - 937
RPM
130
®Norprene M-2 Tube Pumps Meets FDA criteria for food | Excellent chemical resistance | CIP | SIP
LPH
.26 - 52.2
.03 - 6.5.10 - 20.6
.26 - 52.2
230V AC
25-*ND
25-*NH
M-2M-225-*NFM-2
M-225-*NHL
115V AC
M-224-*ND
24-*NHM-224-*NFM-2
M-224-*NHL
GPH
.03 - 5.5.07 - 13.8
.01 - 1.7
.07 - 13.8
220V AC
26-*ND
26-*NH
M-2M-226-*NFM-2
M-226-*NHL
ML/Min
4 - 870
1 - 1082 - 344
4 - 870
Feed Rate
RPM
130130130130
MaxSpeed
M-2 Model Numbers
PSI (bar)
65 ( )65 ( )
4.54.5
MaxPressure
PSI (bar)
125 (8.6)125 (8.6)125 (8.6)65 (4.5)
PSI (bar)
50 (3.4)
MaxTemperature
F (C)
185 (85)185 (85)185 (85)185 (85)
F (C)
130 (54)
F (C)
130 (54)130 (54)
* Inlet/outlet connection typeS = 3/8” OD x 1/4” ID tubing compressions type connectionsM = ½” male NPT C-= 3/4” tri-clamp connections
! The Flex-Pro Pump’s motor speed is linear over the entire 0.5% to 100% adjustment range. ! Output versus pressure is nearly linear in all models. Larger tubes exhibit greater losses.! For optimum tube life, specify the pump to operate at the lowest possible RPM and pressure.
TDS #85000-115 rev. 09182013
Engineering and Technical Data
4 of 6
Chemical Resistance of Tubing:
®Norprene TubingMeets FDA criteria for food | Excellent chemical resistance | CIP | SIP
®Tygothane TubingMeets FDA criteria for food | Resistant to oils, greases and fuels
®Norprene Chemical Tubing - Ultra smooth plasticizer-free bore (inner liner)
Meets FDA criteria for food | Superb chemical resistance
Alcohol generalAluminum Sulfate (Alum)Ammonium chlorideAmmonium hydroxide
Benzyl alcoholBleachBrine solutionsCalcium hypochlorite 20%
Ammonium Sulfate (LAS)
Ethylene glycolFerric chlorideFerric nitrateFerric sulfateFerrous chloride - 43% in waterFerrous sulfate
Formic acidGlucose
Fluosilicic Acid (up to 25%)
Hydrochloric acid 33%Hydrocyanic acidHydrogen peroxideHypochlorous acidIodineMagnesium chlorideMagnesium sulfatePhosphoric acidPlating solutions
Potassium hydroxidePotassium permanganatePropylene glycolSodium hydroxide 50%Sodium BisulfiteSodium Hypochlorite 12.5%Sodium sulfideSulfuric acid up to 50%Tannic acid
CyclohexaneDiesel FuelFatty acidsGasolineHeptaneHexane
KeroseneLardMineral spiritsSoap solutionsTurpentinePolymers
Oils:ASTM reference No.1,2,3CastorCoconutFuel
Oils:LinseedLubricatingMineral
Ferrous Chloride (up to 40%)Fluoboric Acid (up to 48%)Fluosilicic Acid (up to 25%)Hydrofluoric Acid (up to 48%)Nitric Acid (up to 71%)
Phosphoric Acid (up to 85%)Potassium Hypochlorite (up to 70%)Sodium Phosphate (up to 30%)Sulfuric Acid (up to 98%)
BasesSaltsKetonesAlcohols Isobutyl Alcohol
Applications:Ink and solvent productionBattery acid fillingSpecialty chemical production / processingSensitive fluid transfer
®Norprene is a registered trademark of Saint-Gobain.®
Tygothane is a registered trademark of Saint-Gobain.Note: Data shown at 72 degrees F.
s FLEX-PRO ProSeries-Ms Peristaltic Metering Pumps
TDS #85000-115 rev. 09182013
Engineering and Technical Data
5 of 6
Dimensions:
Model Number Matrix:
Dim Inches cm
A
B
C
DE
10-1/4”
7-1/2”
14”
9-1/2”11”
2619
35.624.127.9
M-2 Series
F 3-3/8” 8.6A
F
B
E
C
D
s FLEX-PRO ProSeries-Ms Peristaltic Metering Pumps
3/8” OD x 1/4” ID Tube Compression Fitting, Natural PVDF (Kynar)
Inlet/Outlet Connection Size, Connection Type, Connection Material
Power Cord (operating voltage user selectable 115V/240 Vac 50/60Hz)
Pump Tube Material, Pump Tube Size, Output Range
Options (leave this blank for standard model)
Right facing pump head, input / output (Left facing fluid input / output is standard)
Down facing pump head, input / output (Left facing fluid input / output is standard)
1/2” Male NPT Fitting, Natural PVDF (Kynar)
240V / 50HZ, power cord AS 3112 plug (Australia/New zealand)
130 RPM (maximum rotor rotation speed)
115V / 60Hz, power cord NEMA 5/15 plug (US)
230V / 60Hz, power cord NEMA 6/15 plug (US)
220V / 50HZ, power cord CEE 7/VII plug (EU)
Sample Model Number
Flex-Pro M-2
Maximum Motor Speed
2
4
5
6
4 - N H
R
D
S
S
M
X No Power Cord
8
Maximum Output Range
M 2 2
M
3/4” Tri-clamp connections, Natural PVDF (Kynar)C
2
-
Flex-Pro ProSeries-M Model Number
ND
NF
® Norprene .078 ID, 0.01 to 1.7 GPH® Norprene .250 ID, 0.03 to 5.5 GPH
® Tygothane .125 ID, 0.02 to 4.0 GPH
® Tygothane .187 ID, 0.05 to 9.3 GPH
GE
GG
Options (leave this blank for standard model with left facing pump head inlet/outlet)
Communications Interface - Profibus DPV1 C1
Communications Interface - Modbus RTU
Communications Interface - Modbus TCP
C2
C3
Communications Interface - Industrial EtherNet/IP C4
Communications Interface - Profinet RT I/OC5
- R-C4
® Norprene Chemical .250 ID, 0.08 to 14.9 GPHTHNH®
Norprene .250 ID, 0.07 to 13.8 GPH
NHL® Norprene .250 ID, 0.07 to 13.8 GPH (low psi)
TDS #85000-115 rev. 09182013
Engineering and Technical Data
Patents: 4,496,295 7,001,153 and other patents pending
6 of 6
Features list:
Factory Authorized Representative:
Features:
TFD (Tube Failure Detection) System Alarm
FVS (Flow Verification System) Alarm *
Motor reverse (rotor reversible)
Output: One, 6 amp alarm relay
Input: One, dry contact closure 6-24 Vdc powered loop for remote start / stop
Input: Remote speed control via 4-20mA, 0-10VDC, high speed digital pulse, contact closure pulse
Display: Motor speed, Input signal values, Tube life timer, Tube Failure Detection (TFD) system and Flow Verification System (FVS) alarm status
Manual (local): speed adjustment
Remote input: 4-20mA
Remote input: high speed frequency (pulse) input
Remote input: pulse triggered batch dispensing
Three position pump head rotation
Available Operating Modes:
Optional: remote communications, Profibus DPV1, Modbus RTU, Modbus-TCP, EtherNet/IP, and Profinet RT I/O.
Output: Analog 4-20mA
5300 Business Drive, Huntington Beach, CA 92649Tel: 714-893-8529 Fax: 714-894-9492www.ProSeries-M.com Email: [email protected]
ProSeries-Mby Blue-White Ind.
TM
TDS #85000-115 rev. 09182013
s FLEX-PRO ProSeries-Ms Peristaltic Metering Pumps
* Requires Micro-Flo Sensor sold separately
Optional Communications Commands List
60 second prime at maximum speed
Lock and unlock any touch pad button
Reset pump tube timer
Clear/reset general alarm
Set operating mode
Control Commands Available Pump Status Data
Start/Stop
Set motor speed (0.5 to 100.0%)
Pump head Cover on/off status
Status of each local touch pad button
Current operating mode selection
Motor direction
TFD (Tube Failure Detection) system status
Motor run/stop status
Priming status
FVS (Flow Verification System) status
Current pump operating speed
Current pump tube timer accumulated hours
Current analog input signal value in mA
General alarm status
Alarm output relay status
Pump model and software version
Current frequency input signal value in Hz
Current analog output signal value in mA
Applications:
NEMA 4X
Patents: 4,496,295 7,001,153 and other patents pending
! Municipal Water Treatment
! Municipal Wastewater Treatment
! Chemical Metering
! Chlorination
! Chloramination
! Fluoridation
! Polymer Injection
! Acid Injection
! Alum Injection
! PAC Injection
! Caustic Injection
Features:
5 Year Warranty
FLEX-PRO M-3 & M-4
Brushless DC Motor
10,000:1 Turndown ratio
!
!
!
!
!
!
!
!
!
!
Peristaltic pump design does not have valves that can clog requiring maintenance.
Self priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock or lose prime.
! 10,000:1 turndown ratio with high resolution motor speed adjustment.
Control Inputs include: 4-20mA, 0-10Vdc, and Pulse inputs for remote external speed or batch control and 0-30 VDC / contact closure remote start/stop.
Revolution count display with user programmable alarm set-point for tube maintenance.
VGA Graphic multi-color backlit LCD displays remote/local control status, motor speed, output rate, input signal values, service and alarm status in three easy to see colors.
Outputs include: Scalable 4-20mA or pulse, one 250V/6A relay and three 115V/1A contact closures assignable to monitor various pump functions including TFD, FVS, revolution counter, remote/local, forward/reverse, input signals, output signals, motor on, motor fault, operating mode setting, and others.
Two CNC precision machined squeeze rollers and two alignment rollers provide factory calibrated optimum squeeze for unparalleled accuracy and extra long tube life.
Heavy duty rotor - single piece plastic rotor means no flexing and increased accuracy with no metal springs or hinges to corrode.
Inject at maximum pressure in either direction (clockwise or counter clockwise).
! Output rates to: 158.5 GPH (600 LPH) and pressures to 125 PSI (8.6 Bar).
! No maintenance brushless variable speed motor.
! Specially engineered tubing for long life at high pressures.
! Patented Tube Failure Detection (TFD) system. Senses tube failure by detecting chemical in the pump head. No false triggering from condensation or washdown.
Compatible with Blue-White’s output Flow Verification Sensor (FVS) system.
Engineering and Technical Data
ProSeries-Md Peristaltic Metering Pumps
NEMA 4X (IP 66) Washdown
1 of 6
Model M-324-MNK Model M-424-BNL
Tube Failure Detection
Revolution Count Display & Alarm
NSF Listed Std. 61
s
Sold and serviced exclusively by highly skilled, factory authorized technicians.
ProSeries-Mby Blue-White Ind.
s
TDS #85000-108 rev. 09182012
Engineering and Technical Data
2 of 6
s FLEX-PRO ProSeries-Md Peristaltic Metering Pumps
Engineering Specifications:
Materials of Construction:Wetted components: Non-Wetted components:
Enclosure:413 Aluminum (Polyester powder coated)
Pump Head:q Valox (PBT) thermoplastic
Pump Head Cover:Clear Acrylic - Annealed for added strength and chemical resistance.Permanently lubricated sealed motor shaft support ball bearing.
Cover Screws:Stainless Steel
Roller Assembly:q Rotor: ..................................Valox (PBT)
Rollers: ...............................Nylon Roller Bearings: .................SS Ball Bearings Roller Shaft: ........................316 Stainless Steel
Motor Shaft:Chrome plated steel
TFD System Sensor pins:Hastelloy C-276
Power Cord:3 conductor, SJTW-A Water-resistant
Tube Installation Tool:Glass Filled Nylon
Mounting Brackets and Hardware:316 Stainless Steel
Motor speed adjustment range10,000:1 (0.001% - 100% motor speed)
Motor speed adjustment resolution0.1% increments > 10% motor speed0.01% increments > 1% motor speed and < 10%0.001% increments < 1% motor speed
Maximum viscosity12,000 Centipoise
Maximum suction lift:30 ft. Water, 0 psig (4.5 m, 0 bar)
Display3 color VGA backlit LCD, UV resistant.
Display resolution0.0 > 10% motor speed0.00 > 1% motor speed and < 10%0.000 < 1% motor speed
Display languagesEnglish, Spanish, French or German selectable.
KeypadEleven button positive action tactile switch keypad.
SecurityProgrammable 4-digit password.
Maximum working pressure (excluding pump tubes):125 psig (8.6 bar)Note: see individual pump tube assembly maximum pressure ratings.
Maximum Fluid temperature (excluding pump tubes):o o3/8” OD x 1/4” ID tubing connections: 130 F (54 C)
o oM/NPT connections: 185 F (85 C)Note: see individual pump tube assembly maximum temperature ratings.
Ambient Operating TemperatureO O O O14 F to 115 F (-10 C to 46 C)
Ambient Storage TemperatureO O O O-40 F to 158 F (-40 C to 70 C)
Operating Voltage:M-3 MODELS: 96 to 264VAC-50/60Hz, 220 VAM-4 MODELS: 96 to 264VAC-50/60Hz, 350 VA
Power Cord Options:115V60Hz = NEMA 5/15 (USA)230V60Hz = NEMA 6/15 (USA)220V50Hz = CEE 7/VII (EU)240V50Hz = AS 3112 (Australia/New Zealand)
Enclosure:NEMA 4X (IP66), Polyester powder coated aluminum. Maximum Overall Dimensions: M-3 models: 8-1/8”W x 10-3/4”H x 15-1/4”D (20.6W x 27.3H x 38.9D cm)M-4 models: 12-1/8”W x 14-1/4”H x 18-5/8”D (30.8W x 36.1H x 47.3D cm)
Approximate shipping wt:M-3 models: 33 lb. (15.0 Kg)M-4 models: 58 lb. (26.3 Kg)
Pump Tube Assembly (Model Specific - 2 provided):q q q Tubing: . . . . . Norprene or Norprene Chemical or Tygothane
Adapter fittings: .PVDF
Recommended Ancillary Items Sold Separately:
Injection / Back-flow Check valve: Body & insert: . . . . . . PVDF Check Ball: . . . . . . . . Ceramic Spring: . . . . . . . . . . Hastelloy C-276
q Ball Seat O-ring: . . . . . Viton (optional EP)q Static Seal O-ring: . . . . Viton (optional EP)
q Duckbill anti-scale valve: Santoprene
For “S” tubing type connections only: Suction Tubing: . . . . . 3/8” OD x 1/4” ID x 10’ Clear PVC Discharge Tubing: . . . . 3/8” OD x 1/4” ID x 10’ Polyethylene (LLDPE) Suction Strainer: . . . . . Polypropylene
For “B” tubing and “M” M/NPT connections only:Suction Strainer: Body: . . . . . . . . . . . . . . . . . PVDF Check Ball: . . . . . . . . . . . . Ceramic
q Ball Seat O-ring: . . . . . . . . Viton (optional EP)
For “C” Tri-clamp connections only:none
TDS #85000-108 rev. 09182012
Engineering and Technical Data
3 of 6
s FLEX-PRO ProSeries-Md Peristaltic Metering Pumps
Output Specifications:
* Inlet/outlet connection typeS = 3/8” OD x 1/4” ID tubing compressions type connections M = 1/2”male NPT, B = 1/2” ID tubing barb type connections (M-4 models only),C = 3/4” tri-clamp connections
(M-3 models only),
Output RangeMax
SpeedM-3 Model Numbers
MaxPressure
MaxTemperature
®Tygothane M-3 Tube Pumps Meets FDA criteria for food | Resistant to oils, greases and fuels
GPH
.0004 - 4.60
.0010 - 10.1
.0024 - 24.9
.0028 - 28.5
LPH
.0017 - 17.4
.0038 - 38.4
.0094 - 94.2.0108 - 108
ML/MIN
.0290 - 290
.0637 - 637.1570 - 1570.1800 - 1800
RPM
125125125125
115V AC
24-*GE24-*GG24-*GH
M-3M-3M-3M-324-*GK
230V AC
25-*GE25-*GG25-*GH
M-3M-3M-3M-325-*GK
220V AC
26-*GE26-*GG26-*GH
M-3M-3M-3M-326-*GK
®Norprene Chemical M-3 Tube Pumps
Meets FDA criteria for food | Superior chemical resistanceListed under NSF Std. 61 | LPH
.0055 - 55.1.0108 - 108
230V AC
25-*M-3 THM-325-*TK
115V AC
24-*M-3 THM-324-*TK
GPH
.0014 - 14.5
.0028 - 28.5
220V AC
26-*M-3 THM-326-*TK
ML/MIN
.1800 - 1800.0920 - 920
RPM
125125
®Norprene M-3 Tube Pumps Listed under NSF Std. 61 Meets FDA criteria for food | Excellent chemical resistance | | CIP | SIP
LPH
.0030 - 30.0
.0066 - 66.0
.0096 - 96.0.0126 - 126
.0007 - 7.92
230V AC
25-*ND
25-*NH
25-*NK
M-3M-325-*NFM-3M-325-*NJM-3
115V AC
M-324-*ND
24-*NH
24-*NK
M-324-*NFM-3M-324-*NJM-3
GPH
.0008 - 7.90
.0017 - 17.4
.0025 - 25.3
.0033 - 33.3
.0002 - 2.10
220V AC
26-*ND
26-*NH
26-*NK
M-3M-326-*NFM-3M-326-*NJM-3
ML/MIN
0132 - 132..0500 - 500
.1097 - 1097
.1596 - 1596
.2100 - 2100
RPM
125125125125125
PSI (bar)
65 ( )65 ( )65 ( )
4.54.54.5
65 (4.5)
PSI (bar)
125 (8.6)
125 (8.6)125 (8.6)125 (8.6)
125 (8.6)
PSI (bar)
50 (3.4)50 (3.4)
LPH
.0108 - 108
.0168 - 168
.0192 - 192
.0204 - 204
.0378 - 378
.0600 - 600
230V AC
25-*NH25-*NJ
25-*NL25-*NP
M-4M-4M-425-*NK
M-425-*NHHM-4M-4
115V AC
24-*NH24-*NJ
24-*NL24-*NP
M-4M-4M-424-*NK
M-424-*NHHM-4M-4
220V AC
26-*NH26-*NJ
26-*NL26-*NP
M-4M-4M-426-*NK
M-426-*NHHM-4M-4
ML/MIN
.280 - 2800
.320 - 3200
.340 - 3400
.630 - 63001.00 - 10000
.180 - 1800
RPM
125125125125125125
PSI (bar)
125 (8.6)100 (6.9)80 (5.5)
50 (3.4)30 (2.0)
100 (6.9)
F (C)
185 (85)
185 (85)185 (85)185 (85)
185 (85)
F (C)
130 (54)130 (54)
F (C)
130 (54)130 (54)130 (54)130 (54)
F (C)
185 (85)185 (85)185 (85)
185 (85)185 (85)
185 (85)
®Norprene M-3 Tube Pumps
Meets FDA criteria for food | Excellent chemical resistance Listed under NSF Std. 61 | | Extra long life at low pressuresLPH
.0126 - 126
230V AC
25-*NKLM-3
115V AC
24-*NKLM-3
GPH
.0033 - 33.3
220V AC
26-*NKLM-3
ML/MIN
.2100 - 2100
RPM
125
PSI (bar)
30 (2.1)
F (C)
185 (85)
®Tygothane M-4 Tube Pumps Meets FDA criteria for food | Resistant to oils, greases and fuels
GPH
.0039 - 39.6
.0055 - 55.5
.010 - 100.0
LPH
.0150 - 150
.0210 - 210
.0378 - 378
ML/MIN
.350 - 3500
.630 - 6300
.250 - 2500
RPM
125125125
115V AC
24-*GH24-*GK
M-4M-4
M-424-*GKK
230V AC
25-*GH25-*GK
M-4M-4
M-425-*GKK
220V AC
26-*GH26-*GK
M-4M-4
M-426-*GKK
®Norprene Chemical M-4 Tube Pumps Meets FDA criteria for food | Superior chemical resistanceListed under NSF Std. 61 |
LPH
.0078 - 78.0.0162 - 162.0192 - 192
230V AC
25-*M-4 THM-425-*TK
M-425-*THH
115V AC
24-*M-4 THM-424-*TK
M-424-*THH
GPH
.0020 - 20.6
.0042 - 42.8
.0050 - 50.7
220V AC
26-*M-4 THM-426-*TK
M-426-*THH
ML/MIN
.270 - 2700
.320 - 3200
.130 - 1300
RPM
125125125
®Norprene M-4 Tube Pumps Meets FDA criteria for food | Excellent chemical resistance Listed under NSF Std. 61 | | CIP | SIP
Output RangeMax
SpeedM-4 Model Numbers
PSI (bar)
65 ( )65 ( )
4.54.5
65 (4.5)
MaxPressure
PSI (bar)
30 (2.1)30 (2.1)30 (2.1)
Max Temperature
F (C)
130 (54)130 (54)130 (54)
F (C)
130 (54)130 (54)130 (54)
®Norprene M-4 Low Pressure Tube Pumps Meets FDA criteria for food | Excellent chemical resistance Listed under NSF Std. 61 | | Extra long life at low pressures
LPH
.0192 - 192
.0420 - 420
230V AC
25-*NKLM-4M-425-*NKKL
115V AC
24-*NKLM-4M-424-*NKKL
GPH
.0050 - 50.7.011 - 111.0
220V AC
26-*NKLM-4M-426-*NKKL
ML/MIN
.700 - 7000
.320 - 3200
RPM
125125
PSI (bar)
30 (2.1)30 (2.1)
F (C)
185 (85)185 (85)
GPH
.0028 - 28.5
.0044 - 44.4
.0050 - 50.7
.0054 - 54.0
.010 - 100.0
.015 - 158.5
TDS #85000-108 rev. 09182012
Engineering and Technical Data
s FLEX-PRO ProSeries-Md Peristaltic Metering Pumps
4 of 6
Chemical Resistance of Tubing:®Norprene Tubing
Meets FDA criteria for food | Excellent chemical resistance
®Tygothane TubingMeets FDA criteria for food | Resistant to oils, greases and fuels
®Norprene Chemical Tubing - Ultra smooth plasticizer-free bore (inner liner)
Meets FDA criteria for food | Superior chemical resistance
Alcohol generalAluminum Sulfate (Alum)Ammonium chlorideAmmonium hydroxide
Benzyl alcoholBleachBrine solutionsCalcium Hydroxide 10% (Lime Slurry)Calcium hypochlorite 20%
Ammonium Sulfate (LAS)
Citric Acid 50%Ethylene glycolFerric chlorideFerric nitrateFerric sulfateFerrous chloride - 43% in waterFerrous sulfate
Formic acidGlucose
Fluosilicic Acid (up to 25%)
Hydrochloric acid 33%Hydrocyanic acidHydrogen peroxideHypochlorous acidIodineMagnesium chlorideMagnesium sulfatePhosphoric acidPlating solutionsPolyaluminum Chloride (PAC)
Potassium hydroxidePotassium permanganate 40%Propylene glycolSodium hydroxide 50%Sodium BisulfiteSodium Chlorite 12%Sodium Hypochlorite 12.5%Sodium sulfideSulfuric acid up to 50%Tannic acid
CyclohexaneDiesel FuelFatty acidsGasolineHeptaneHexane
KeroseneLardMineral spiritsSoap solutionsTurpentine
Oils:ASTM reference No.1,2,3CastorCoconutFuel
Oils:LinseedLubricatingMineral
Ferrous Chloride (up to 40%)Fluoboric Acid (up to 48%)Fluosilicic Acid (up to 25%)Hydrofluoric Acid (up to 48%)Nitric Acid (up to 71%)
Phosphoric Acid (up to 85%)Potassium Hypochlorite (up to 70%)Sodium Phosphate (up to 30%)Sulfuric Acid (up to 98%)
BasesSaltsKetonesAlcohols Isobutyl Alcohol
Applications:Ink and solvent productionBattery acid fillingSpecialty chemical production / processingSensitive fluid transfer
®Norprene is a registered trademark of Saint-Gobain.®Tygothane is a registered trademark of Saint-Gobain.
Pump Tube Assembly Output Specifications:
LPH
.
.
.
0007 - 7.92.0030 - 30.0.0066 - 66.0.0096 - 96.0.0126 - 126.0126 - 1260055 - 55.1.0108 - 1080017 - 17.4.0038 - 38.4.0094 - 94.2.0108 - 108
GPH
.
.0014 - 14.5
.0028 - 28.5
.
0002 - 2.10.0008 - 7.90.0017 - 17.4.0025 - 25.3.0033 - 33.3.0033 - 33.3
0004 - 4.60.0010 - 10.1.0024 - 24.9.0028 - 28.5
Output Range
Model M-3 - Available Pump Tubes and Output Ranges
PSI (bar)
125 (8.6)
125125 (8.6)
(8.6)125 (8.6)125 (8.6)30 (2.1)50 (3.4)50 (3.4)65 (4.5)65 (4.5)65 (4.5)65 (4.5)
Max OutputPressure
TubeMaterialMaterial
NorpreneNorpreneNorpreneNorpreneNorpreneNorprene
Norprene ChemicalNorprene Chemical
TygothaneTygothaneTygothaneTygothane
Code
NDNFNHNJNK
NKLTHTKGEGGGHGK
ML/Min
.
.0920 - 920.1800 - 1800.
0132 - 132.0500 - 500
.1097 - 1097
.1596 - 1596
.2100 - 2100
.2100 - 2100
0290 - 290.0637 - 637
.1570 - 1570
.1800 - 1800
TubeSize
F (C)
185 (85)
185 (85)185 (85)
185 (85)
185 (85)185 (85)130 (54)130 (54)130 (54)130 (54)130 (54)130 (54)
MaxTemp
LPH
.
.
.
0108 - 108.0168 - 168.0192 - 192.0204 - 204.0378 - 378.0600 - 600.0192 - 192.0420 - 4200078 - 78.0.0162 - 162.0192 - 1920150 - 150.0210 - 210.0378 - 378
GPH
.
.0020 - 20.6
.0042 - 42.8
.0050 - 50.7
.0039 - 39.6
0028 - 28.5 .0044 - 44.4.0050 - 50.7.0054 - 54.0
.0100 - 100.0
.0158 - 158.5.0050 - 50.7.0111 - 111.0
.0055 - 55.5.0100 - 100.0
Output Range
Model M-4 - Available Pump Tubes and Output Ranges
PSI (bar)
125 (8.6)100 (6.9)80 (5.5)
100 (6.9)50 (3.4)30 (2.1)30 (2.1)30 (2.1)30 (2.1)30 (2.1)30 (2.1)65 (4.5)65 (4.5)65 (4.5)
Max OutputPressure
TubeMaterialMaterial
NorpreneNorpreneNorpreneNorpreneNorpreneNorpreneNorpreneNorprene
Norprene ChemicalNorprene ChemicalNorprene Chemical
TygothaneTygothaneTygothane
Code
NHNJNK
NHHNLNP
NKLNKKL
THTK
THHGHGK
GKK
ML/Min
.
.
1800 - 1800.2800 - 2800.3200 - 3200.3400 - 3400.6300 - 63001.00 - 10000.3200 - 3200.7000 - 70001300 - 1300.2700 - 2700.3200 - 3200.2500 - 2500.3500 - 3500.6300 - 6300
TubeSize
F (C)
185 (85)185 (85)185 (85)185 (85)185 (85)185 (85)185 (85)185 (85)130 (54)130 (54)130 (54)130 (54)130 (54)130 (54)
MaxTemp
A3-ND-R
A3-NH-RA3-ND-R
A3-NH-RA3-NH-RA3-NH-RA3-TH-RA3-TH-RA3-GE-RA3-GE-RA3-GE-RA3-GE-R
Required Roller Part Number
A4-NH-RA4-NH-RA4-NH-RA4-TH-RA4-NL-RA4-NL-RA4-TH-RA4-TH-RA4-TH-RA4-TH-RA4-TH-RA4-GH-RA4-GH-RA4-GH-R
Required Roller Part Number
TDS #85000-108 rev. 09182012
Engineering and Technical Data
5 of 6
s FLEX-PRO ProSeries-Md Peristaltic Metering Pumps
Dimensions:
Model Number Matrix:
Dim Inches cm
A
B
C
DE
10-3/4”
8-1/8”
15-1/4”
10”12-1/4”
27.320.6
38.925.431.0
M-3 Series
Inches cm
14-1/4”
12-1/8”
18-5/8”
11”13-5/8”
36.130.8
47.327.934.6
M-4 Series
F 4-1/4” 10.7 6” 15.2
14.2"(36.1cm)
6.0"(15.2cm)
12.13"30.8cm)
Front View
11.0"(27.9cm)
13.63”(34.6cm)
18.63”(47.3cm)
Right View
A
B
F
C
D
E
3/8” OD x 1/4” ID Tube Compression Fitting, Natural PVDF (Kynar), M-3 models only
Inlet/Outlet Connection Size, Connection Type, Connection Material
1/2” ID Tubing Barb Fitting, Natural PVDF (Kynar), M-4 models only
Power Cord (operating voltage requirement 96VAC to 264VAC)
Pump Tube Material, Pump Tube Size
Options (leave this blank for standard model)
Right facing pump head, input / output (Left facing fluid input / output is standard)
Down facing pump head, input / output (Left facing fluid input / output is standard)
1/2” Male NPT Fitting, Natural PVDF (Kynar)
240V / 50HZ, power cord AS 3112 plug (Australia/New zealand)
125 RPM (maximum rotor rotation speed)
115V / 60Hz, power cord NEMA 5/15 plug (US)
230V / 60Hz, power cord NEMA 6/15 plug (US)
220V / 50HZ, power cord CEE 7/VII plug (EU)
Sample Model Number
Flex-Pro M-3 maximum output 33.3 GPH(126 LPH)
Maximum Motor Speed
2
4
5
6
4 - N H
R
D
M
S
M
X No Power Cord
8
Flex-Pro M-4 maximum output 158.5 GPH (600 LPH)
B
4
Maximum Output Range
M 4 2
M
3/4” Tri-clamp connections, Natural PVDF (Kynar)C
3
-
®Flex-Pro ProSeries-M Model Number®
® Norprene M-3 models.075 ID, only
® Norprene Chemical .250 ID
GE
GG
GH
® Norprene .250 ID
® Norprene .312 ID
® Norprene .375 ID
® Tygothane .125 ID, M-3 models only
® Tygothane .187 ID, M-3 models only
® Tygothane .250 ID
ND
NH
NJ
NK
TH
GK®
Tygothane .375 ID
NKL®
Norprene .375 ID (30 PSI max pressure - longer life)
NL
NP ® Norprene .750 ID, M-4 models only
® Norprene .500 ID, M-4 models only
NKKL®
Norprene .375 ID (30 PSI max - Dual Tube), M-4 models only
® Norprene .250 ID (Dual Tube), M-4 models only NHH
TH
® Norprene Chemical .375 IDTK
® Norprene Chemical .250 ID (Dual Tube), M-4 models only THH
® Norprene Chemical .375 ID (Dual Tube), M-4 models onlyTKK
GKK ® Tygothane .375 ID (Dual Tube), M-4 models only
GHH®
Tygothane .250 ID (Dual Tube), M-4 models only
® Norprene M-3 models.155 ID, onlyNF
TDS #85000-108 rev. 09182012
5300 Business Drive, Huntington Beach, CA 92649Tel: 714-893-8529 Fax: 714-894-9492www.ProSeries-M.com Email: [email protected]
Engineering and Technical Data
All trademarks are the property of their respective owners.
Patents: 4,496,295 7,001,153 and other patents pending
6 of 6
Features list:
* Requires Micro-Flo Sensor sold separately
Features
TFD (Tube Failure Detection) System Alarm
FVS (Flow Verification System) Alarm *
10,000:1 turndown reversible motor.
Tube Life revolution counter with user programmable alarm set-point.
Output: One, 6 amp alarm relay
Output: Three, dry contact or maximum 30VDC/115VAC 1 amp contact closures
Output: Programmable 4-20mA signal or high speed pulse, proportional to pump output
Input: One, contact closure (remote start / stop)
Input: Remote speed control via 4-20mA, 0-10VDC, high speed digital pulse, contact closure pulse
Remote/Local control settings
Password protection
Display: Motor speed, Tube life revolutions, Tube Failure Detection (TFD) system and Flow Verification System (FVS) alarm status
Display: Output in ml/min, oz/min, L/hr, Gal/hr, Gal/day, RPM, and input signal values
Automated PPM chemical dosing system
Manual (local): speed adjustment
Remote input: 4-20mA
Remote input: 0-10 VDC
Remote input: high speed frequency (pulse) input
Remote input: pulse triggered batch dispensing
Remote input: proportional PPM (parts per million) dosing with high speed frequency (pulse) input
Manual (local): batch dispensing
Manual (local): repeating cycle timer
Manual (local): fixed speed PPM (parts per million) dosing
Three position pump head rotation
Available Operating Modes:
s FLEX-PRO ProSeries-Md Peristaltic Metering Pumps
Four output contacts can be triggered by the status of the TFD system, FVS system, general alarm, rotor direction, motor run/stop,revolution count, motor fail, remote/local setting, input signal failure, output signal failure, and currently active operating mode.
Power interruption re-start options.
Set maximum motor RPM limit.
Factory Authorized Representative:
TDS #85000-108 rev. 09182012
ProSeries-Mby Blue-White Ind.
q