815-0048-001-PUBILAX-E

Data Sheet I iLink Agg xStream At a Glance • Increases monito ring eciency by enabling tools to view the trac on as many as 24 network links or Span ports simultaneous ly (external Ta ps are required for connections to network links) • Eliminates resource conte ntion by enabling as many as four devices to monitor identical trac at the same time • Improves monito ring exibility with fully congurable port mappings (any number of links to any number of available tools) • Provides complete visibility at 10 Gbps without interfering with the data stream and without introducing a point of failure • RMON statistics and extensive statistics covering network trac, utilization and protocol distributio n, All counters can be exported Information Intelligence Provides visibility or RMON trac statistics, link utilization levels and error rates in real time. A management port enables remote management and monitoring from anywhere in the network, giving you the information you need to quickly respond to network events. Security and Reliability The iLink Agg x Stream is a secure and r eliable applianc e that delivers unsurpassed monitoring access exibility. It handles network trac entirely in hardware. Conguration variables can be changed only through the device’s management port, so your monitoring access is immune to viruses, worms, and other attacks that pass through the iLink Agg xStream network ports. Zero Dropped Packets The iLink Agg x Stream scans incoming trac from the netw ork ports on a r st-in-rst-out basis. T he scan rate is optimized to ensure that no packets are dropped as long as the sum of data rates on the network ports does not exceed the monitoring port capacity of 10 Gbps (or 1 Gbps for monitor ports with 1G SFP transceivers). 10 Gigabit Flexible Port Mapping • Dual redundant hot-swap pable AC or DC power supplies • Supports media type conversion with 10Gig SFP+ or 1Gig SFP transceiver modules on both the network and monitor ports • Intuitive Web UI, SSH access • Graphical “Drag & Draw” Filters • Port rate limiting • High Availability (HA) • Any port can be used for monitor or network • Twenty-fo ur 1-Gigabit S FP+/ 10-Gigabit • Advanced SNMPv3 integrates with all major NMS and Indigo Pro • TACACS+/RADIUS support • Pre-loaded with common port mapping congurations • LEDs indicate Link, Activity, and Power status • Front-mou nted connectors ease installation and operation • High density 1U rack enclosure • Compatible with all Net Optics Taps and Bypass Switches • Compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, rewalls, and intrusion detection/prev ention systems • Role Based Access Control Management The need to monitor expanding v olumes of 10 Gbps trac is straining CAPEX budgets due to the high cost of 10G monitoring tools. The iLink Agg xStream helps you leverage your monitoring tool investments by enabling existing 1G tools to be applied to 10G trac, providing the ability to take advantage of the full bandwidth of 10G tools, and supplying more port density than any other 1U form factor link aggregator. The iLink Agg x Stream is a li nk aggregator t hat combines trac from multiple network links or Span ports and sends it to your monitoring tools. Each of its 24 SFP+ ports accepts both 10G SFP+ and 1G-SFP transceivers , enabling 10G and 1G links, Span ports, and monitoring appliances to interconnect in any mix of speeds, including dierent ber and copper media types. The iLink Agg xStream automatica lly performs all data-rate and media-type conversio ns, enabling 10G trac to be sent to 1G appliances, and 1G trac to 10G tools. This capability protects your security appliance investment, because the iLink Agg xStream enables you to apply your existing arsenal of 1G monitoring tools to your new 10G trac links. You can aggregate the trac from multiple 1G links and low-utilization 10G links to ll up the bandwidth of expensive 10G tools. Double your Ports Using simplex cables you can eectively double your ports to support 48 connections: 24 network inputs and 24 tool outputs. Management Software iLink Agg xStream has an intuitive Web UI, a command line interface (CLI) and SNMP support. Managing your iLink Agg xStream is easy, whether you are present in the NOC or working remotely.

815-0048-001-PUBILAX-E

Documents

Transcript of 815-0048-001-PUBILAX-E