8 INO Coater GRC engino-ziri.si/pdf/8_INO_Coater_GRC_eng.pdf · INO Coater GRC Roller coatingRoller...
Transcript of 8 INO Coater GRC engino-ziri.si/pdf/8_INO_Coater_GRC_eng.pdf · INO Coater GRC Roller coatingRoller...
![Page 1: 8 INO Coater GRC engino-ziri.si/pdf/8_INO_Coater_GRC_eng.pdf · INO Coater GRC Roller coatingRoller coatingting machinemachinemachine INO jumbocoater is designed to apply ink on glass](https://reader036.fdocuments.us/reader036/viewer/2022090401/5fcecd1a644a7b1bfc699b7f/html5/thumbnails/1.jpg)
INO Coater GRC
Roller coaRoller coaRoller coaRoller coatingtingtingting machinemachinemachinemachine
INO jumbocoater is designed to apply ink on glass using a roller. Easy handling, rapid tool
alternation and fine regulation of all for roller coating required parameters are just some of
machine's advantages.
Device Device Device Device cccconsistonsistonsistonsistssss of:of:of:of:
• Solid basic frame.
• Transport system with transport belt and supporting roller.
• Application unit which consists of:
- Metal made doctor roll and rubber made application cylinder.
- Distance adjustment system unit between doctor-blade cylinder and rubber made
application-cylinder, which determines ink deposit.
- Motor driven vertical application unit drive.
• Rubber made application cylinder with 24 incisions per inch (approx. 100 µm ink deposit at
forward coating process).
• Option 1: Antistatic bar
• Option 2: Ink pump
Technical Technical Technical Technical characteristicscharacteristicscharacteristicscharacteristics::::
Transport belt speed adjustable between 1 and 6 m/min
Supporting cylinder diameter 350 mm
Application cylinder diameter 350 mm
Application cylinder speed adjustable between 0,9 and 6,6 m/min
Doctor-blade cylinder diameter 240 mm