8/3/2019 797926_G0

1/2

TV control module

TV control codes freely programmable

TV control codes freely programmable

Electrically isolated according to DIN VDE 0834

Many standard commercial TV's controllable

General description and functio-

ning of the system clino phon 99With clino phon 99 Ackermann clino

provides a call system with speech

support. clino phon 99, the extended

proven call system clino opt 99,

enables the staff to make contact

with the patient without being

physically with them.

Personal speech contact can thus

be made quickly at any time; waiting

times are reduced to a minimum.

The nursing staff can receive thepatient's request and - without first

visiting the patient - deal with it im-

mediately. That creates time for a

personal word. The area of applica-

tion for clino phon 99 stretches from

senior residences and nursing

homes to rehabilitation centres to

hospitals and clinics. The opportuni-

ty for voice communication enables

their care organisation to be consi-

derably more efficient.

The infrastructure of clino phon 99

builds on the bus structures of the

system clino opt 99. The zone

controller serves as a control unit for

the zone databus. Within a ward the

room terminals, or electronic modu-

les if any, serve as the control units

for the room. For the special require-

ments of the care services in the

duty room, the master station is

available, via which general announ-

cements or organisational functionssuch as call forwarding to neigh-

bouring wards can be realised.

The configuration of the system is carried out easily from a central PC or,

in small systems, by means of the proven configuration module. clino phon99 has a multiplicity of system interfaces. Apart from the classic connec-

tion of paging systems, DECT systems can also be connected to clino

phon 99. According to the system design and installed clino phon 99

equipment the staff is able to use cordless DECT phones for answering

patient calls.

Modern interface to standard commercial TV's - the TV control

module

The TV control module serves as a communication interface between the

bed units and a TV in patient and residents' rooms. A multiplicity of stan-

dard commercial TV's, which can process the RC5 protocol, as well as

hospital TV's with RSIG interface and special TV protocols, are alreadysupported by the TV control module - manufacturer and types of television

on request.

The TV control module is driven by the higher-ranking equipment (bed

module / wall electronics) and converts the received commands into the IR

protocol of the TV equipment. Connection to the TV equipment is made by

means of a special cable. In addition to a SCART plug, the connection

cable contains a miniature IR transmitter, which is easy to attach to the TV

equipment and almost invisibly takes over control of the equipment - thus

protecting the aesthetics in all applications. The pick-up of the TV tone is

made via the standardised Euro AV SCART socket of the TV equipment to

be controlled, whereby the necessary electrical isolation and the adjust-ment in the level of the acoustic signal take place in the TV control

module. The TV tone is forwarded to the higher-ranking equipment (e.g.

bed module) and can be adapted by the user according to requirements

by means of the patient handset.

The coding of the TV control module is adapted locally to the respective

call system and the TV equipment to be controlled - complex programming

is not necessary. The TV control module is compatible with the bed

modules / electronics of the systems clino phon 99 and clino com 21 and

can also be operated with the wall electronics of the systems clino opt 99

and clino phon 95. Thus downwards compatibility to older system installa-

tions is guaranteed.

8/3/2019 797926_G0

2/2

PartNo.797926.G

011/2006Technicalinform

ationissubjecttochangewithoutnotice!

Dieselstrae 2, D-41469 Neuss Phone: +49 (0) 21 37 / 17-0 Internet: E-mail:Fax: +49 (0) 21 37 / 17-286 www.ackermann-clino.de info@ackermann-clino .de

Novar GmbH a Honeywell Company

Fernkorngasse 10, A-1100 Wien Phone: +43 (0)1 / 6 00 60 30 Internet: E-mail:Fax: +43 (0)1 / 6 00 60 30-900 www.novar.at novar.austria@honeywell.com

Novar Austria GmbH

Example of application in a patient room

Technical Data

Operating voltage 24 V DC 10%

Current consumption in standby (@ UNOM) 17,5 mA

Current consumption in switching mode (@ UNOM) 20 mA to 30 mA

Carrier for RC5 36 kHz

1 Bit (Manchester) Bit period RC5 1,7778 ms

Ambient temperature 5 C to 50 C

Dimensions (W x H) 71 x 71 mm

Installation depth, flush 30 mm

Fixing in flush-mounted box, DIN 49073

Relative humidity 20 % - 80 %

Weight approx. 44 g

Fire protection class, housing V1 according to EN 60950 Part 4.4

Protection class IP 40, when installed incl. according cover plate

Order information Part No.

TV control module 79813C1

Connection cable black for hospital TV's (1 m) 89735S1

Connection cable black for standard TV's (1 m) 89735S2

Surface-mounted base, single 88915A3

Cover plate with TV symbol 88912B3

Mounting frame (single) 88914A3For further order information please refer to our "Ackermann clino" Product Line Catalogue.