763-428-3677 SupremeStands
Transcript of 763-428-3677 SupremeStands
SupremeStands.com 763-428-3677
1/31/2020
Mini Split Heat Pump Stand
Dehumidifier StandMIN1627 (12" high)
30"
20 ½
”
15 1
/8" 12"
30”
29 ½”
15 7/8"
21"
Top View Side View
End View
Slide rail to proper width
Up to 26"
2 ½”
10"
14"
5/16" hole
24 ½”
Adjustable top plate
28 ¾”
Powder coat finishRust resistantStackable for spaceFits 36 x 24" padHardware Included400 lb capacity
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
Mini Split Stand
Dehumidifier Stand Easy to drain
Mini Split Heat Pump Stands
MIN1832 bracket
18550 County Rd. 81Maple Grove, MN [email protected]
Powder coat finishRust resistantStackable for spaceHardware included500 lb capacity
3"
12"
17"
5/16" hole
35"
23
"
18
"
Top ViewUp to 29"
32"
35”
32" 18"
23"
Side View End View
10" HighPart # MIN1832
Pad Size: 24 x 36"
3"
12"
17"
5/16" hole
38"
28
"
18
"
Top View
Up to 29"
32"
18"
38"
32" 18"
28"
Side View End View
Slide rail to proper width
Mini Split Stand (gray)18" High
Part # MIN1832TPad Size: 30 x 40"
MIN1832 (10 high)MIN1832T (18" high)
10"
Slide rail to proper width
Mini Split Heat Pump Stands
18550 County Rd. 81Maple Grove, MN [email protected]
Powder coat finishRust resistantStackable for spaceHardware included500 lb capacity
38"
28"
23"
Top View
Up to 32"
35"
Slide rail to proper width
Mini Split Stand (gray)10" High
Part # MIN2335Pad Size: 30 x 40"
MIN2335 (10" high)
38”
35" 23"
28"
Side View End View
3"
17"22"
5/16" hole10"
Powder coat finishRust resistantSturdy wall bracketHardware included300 lb Max
24"
34"
18
"Adjustable to 30"
Hook and slide adjustableMini Split Wall Brackets
Part # WB2430
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
9”
16 " 16"
5/8" holes
Hardware Include:4- 8mm x 1.25 x 30mm w/flange bolt4- 8mm x 1.25 w/flange nuts3- ½” x 4" anchor bolts w/washer3- ½” x 4" Lag bolts w/washer (wood mount)4- 1 ½” x ½” rubber grommets
Hole is¾” from end
Instructions:
1. Slide hooked end of L shape bracket over the top bar.2. Secure top bar to wood or concrete.3. Spread leg to desired width and tighten bolts.4. Insert rubber grommets in slotted holes.5. Bolt unit to the bracket with 8mm x 1.25 x mm flange bolt and nut.
17"14"
12 ”
Works on units 9" to 17" wide
Wall hanging dehumidifiers
Mounts on rubbergrommets tostop vibration
Universal AC Wall Bracket Part #ACWB-40
Powder coat finish (rust resistant)Mounted on rubber vibration eliminators Sturdy wall bracketHardware included(450 lb. max)
34"
12
"Adjustable to 30"
Hook and slide adjustableAC wall bracket
Part #ACWB-40
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
16 " 16"
5/8" holes
Hardware Include:4- 1 ½” x ½ rubber grommet4- 1" x #10 Screws4- 3/16" bonded washers5- ½” x 5 1/2" anchor bolts w/washer (concrete mount)3- ½” x 5" lag bolts w/washer (wood mount)1- 32" x 3/8" threaded rod w/4 nuts for spacer.
40"
23"17"11"
Use Anchor for Leveling bolts 5" x ½”(2 additional ½” nuts are needed)
5 ½ x 5 1/2” anchor boltsrecommended for poured wall mount
3 lag bolts & 2 anchors for leveling boltsrecommended when mounting to block wall.
1 ½ x 1/2” rubber grommet
Poured Wall
Block wall
w/rim plate
8"
19" inside
19
"
TopView
13"
22 ½”
22
½” o
utsid
e
Reversible Stands forAir Conditions &
Heat PumpsFits
Bryant, Carrier, Payne, etc.
24"
24
"
Fits 31x31 & 35x35" units
30"
30"
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
ReversiblePowder coatedDistributes weight evenlyKeeps from saddlingHolds up to 2,000 lbs.Stackable (less space)Pallet quantity (42)Looks professional
Part#: HPS1923
Part#: HPS2430
Fits 23x23 & 26x26" units
9 ¼”
Top View
24"
30"
10"Side View
22 ½”
19 5/8"
10
"
22 ½” outside
19 5/8" outside
10
"Side view
Side view
15 1/4”
15
1/4
”
Easier to serviceKeep dogs from urinating on unitProtect from mowing and weed whippingKeep mice out of unitLow ground or flooding
Why under AC’s
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
24"
24
"
30"
30
" Top View
24"
30"
10"Side View
Telescoping BracketBracket can go on both sidesUniversal Stand (works on all)
24 to 30"
Reversible Powder coatedCustom fitLooks professionalDurableHolds up to 2,000 lbs.Stackable (less space)Pallet quantity (42)
Reversible Heat Pump StandLennox Heat Pumps
Part UNV2430 w/bracket fits
XP25, XP21, XP17, XP16, XP14, XP13, HPX14 units
24 x 24" & 28 x 28" units Lennox units27 x 28" units30 x 35 & 35 x 39" units32 x 32" units
Easier to serviceKeep dogs from urinating on unitProtect from mowing and weed whippingKeep mice out of unitLow ground or flooding
Why under AC’s
Reversible Heat Pump StandFits Goodman, Amana, Daikin
Reversible Powder coatedLooks professionalDurableHolds up to 2,000 lbs.Stackable (less space)Pallet quantity (42)
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
(fits 29 x 29" units and 35 ½” x 35 ½” units)
24"
24"
30"
30
"
Part#: HPS2430
Top View
24"
30"
10
"Side View
Easier to serviceKeep dogs from urinating on unitProtect from mowing and weed whippingKeep mice out of unitLow ground or flooding
Why under AC’s
Reversible Heat Pump StandRheem & Ruud Units
Reversible Powder coatedCustom fitLooks professionalDurableHolds up to 2,000 lbs.Stackable (less space)Pallet quantity (42)
LEN2828 Part # (fits 33 ¾ x 33 ¾” & 35 ¾ x 35 ¾” units)
28 5/8"
28 5
/8"
Top view
32 5/8"
32 5/8"
19
¾”
19 ¾” 12"
21
1/8
”
21 1/8”
LEN2828 (fits 33 ¾ x 33 ¾” & 35 ¾ x 35 ¾” units)HPS1923 (fits 29 ¾ x 29 ¾” unit)
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
19" inside
19 "
Topview
13"
22 ½”
22 ½
” outs
ide
HPS1923 Part # (fits 29 ¾ x 29 ¾” units)
9 ¼”
22 ½”
19 5/8"
10"
22 ½” outside
19 5/8" outside
10"Side view
Side view
15 1/4”
15 1
/4”
15 5
/8”
32 5/8
28 5/8"
10
"
32 5/8"
28 5/8"
10
"
Side view
Side view
Reversible Heat Pump StandsFits all Trane and American Standard
Heat Pumps
Part HPS2428Fits 33 x 30" & 37 x 34"
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
ReversiblePowder coatedCustom fitLooks professionalDurableHolds up to 2,000 lbs.Stackable (less space)Pallet quantity (42)
24"24
"
28 ½”
28
½”
Top View
24"
28 ½”
10
"Side View
Easier to serviceKeep dogs from urinating on unitProtect from mowing and weed whippingKeep mice out of unitLow ground or flooding
Why under AC’s
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
24"
24"
30"
30" Top View
24"
30"
10
"Side View
Telescoping BracketBracket can go on both sidesUniversal Stand (works on all)
24 to 30"
ReversiblePowder coatedLooks professionalDurablePallet quantity (42)
Universal Reversible Heat Pump StandPart # UNV2430
Part UNV2430JCI, Nordyne & Bosch units
Easier to serviceKeep dogs from urinating on unitProtect from mowing and weed whippingKeep mice out of unitLow ground or flooding
Why under AC’s
Universal Boiler and Tankless Water Stand
18550 County Rd. 81Maple Grove, MN [email protected]
Adjustable legs for levelingEasy assemblyPowder coated finishHardware included1 ½ x 1 ½” sq. tube300 lb max
Part Number: BS2454
54"
24"
28
"
Boiler or Tankless
Water Heater
Anchor Bolt
Leveling Legs
Instructions:
Install the crossbar with ½” holes on the bottom for anchor boltInstall top two crossbars with bolts included and tighten. (optional height)Self taping included for mounting the boilerAnchor bolt is not included (required when boiler is over 200 pounds.)
22"
Optional
16"24"
Unit Heater BracketPart Number: UH22
22"1
7 1
/2"
Top side View Lower Bracket
Side view upper bracket
Top view upper bracket
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
16
"
14
1/2
"
27"
6"
6"
1 ¼”
Mount upper bracket to ceilingAttach lower bracket to unitSimply hook unit to upper bracket and tightenHardware included with powder coat finishRotates to any angleCarriers up to 300 lb.
7/16"
1 ¼”
7/16"
1 ¼”
7/16"
Hardware included2- 2 ½ x 3/8 lag bots4- ¾ x 3/8 bolts4- 3/8 nuts10- 3/8 bonded washers2- safety brackets
1 ¼”
7/16"
8"
21"
Quick Hanging Unit Heater Wall BracketPart Number: UHWB
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
Mount wall bracket to wall.Attach lower bracket to unitSimply hook unit to upper bracket and tightenHardware included with powder coat finishRotates to any angle150 lb max
Hardware included1- ½” x 1-¼” flange bolt4- 2 ½ x 3/8 lag bots5- ¾ x 3/8 bolts12- 7/16 bonded washers5- 3/8 nut1- 3/8 lock washer
Unit Heater
28 ½”
24
½”
26 5/8"
12 ½”Off wall
Rotates to any angle
21"
18
5/8
"
17
3/8
"
13"
17 5
/8"
18 ½’
15
5/8
"
1 ¼”
7/16" 7/16"
1 ¼” 1 ¼” 1 ¼”
7/16" 7/16"
27"
16"24"
Quick Hanging Unit Heater BracketPart Number: UH21-R
Side view upper bracket
Top view upper bracket
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
27"
6"
6"
Mount upper bracket to ceilingAttach lower bracket to unitSimply hook unit to upper bracket and tightenHardware included with powder coat finishRotates to any angleFits UDAP 30 to 125,000 btu’s300 lb. max limit.
1 ¼”
7/16"
Hardware included1- ½” x 1-¼” flange bolt2- 2 ½ x 3/8 lag bots2- ¾ x 3/8 bolts4- 7/16 Bonded rubber washer2- safety brackets
17 3/8" need to exact
18 7/8"
Top view lower bracket
Side view lower bracket
13 5/8”
Lower bracket attaches to unit
5¼”
¾” ¾”
½” dia. ½” dia.
8"
Part # RW-3/4This ratcheted-end wrench works best
27"
Quick Hanging Unit Heater BracketPart Number: UH28-R
Side view upper bracket
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
Mount upper bracket to ceilingAttach lower bracket to unitSimply hook unit to upper bracket and tightenHardware included with powder coat finishRotates to any angleFits UDAP 30 to 250,000 btus300 lb max.
Fits Reznor UDAP Power Vent
Fits unit up to 250,000 btu’s
6"
25 11/16"
27 3/16"
Top view lower bracket
Side view lower bracket
19”
Lower bracket attaches to unit
8 3/16"
¾” ¾”
½” Holes
Hardware included1- ½” x 1-¼” flange bolt2- 2 ½ x 3/8 lag bots2- ¾ x 3/8 bolts4- 3/8 bonded washer2- safety brackets
27 3/16"
17 3/8" 4 5/16
16"24"
27"
6"1 ¼”
7/16"
8"
Part # RW-3/4This ratcheted-end wrench works best
Top view upper bracket
Quick Hanging Unit Heater Wall BracketPart Number: UHWB-R
18550 County Rd. 81Maple Grove, MN 55369763-428-3677
6"
Mount wall bracket to wall.Attach lower bracket to unitSimply hook unit to upper bracket and tightenHardware included with powder coat finishRotates to any angleFits UDAP 30 to 125,000 btu’s150 lb. Max.
Hardware included1- ½” x 1-¼” flange bolt4- 2 ½ x 3/8 lag bots3- ¾ x 3/8 bolts5- 3/8 bonded washers1- 3/8 nut1- 3/8 lock washer
17 3/8" need to exact
18 7/8"
Top view lower bracket
Side view lower bracket
13 5/8”
Lower bracket attaches to unit
5¼”
¾” ¾”
½” dia. ½” dia.
Unit Heater
28 ½”
24
½”
26 5/8"
12 ½”Off wall
Rotates to any angle
Part Number: 3/4RW
Best wrench to use
Concentric Vent Screen KitPart # CV-2 DVSPart # CV-3 DVS
Part # CV-2 DVS (fit 2" concentric vent)Hub measurement 2 ¾”
Part # CV-3 DVS (fit 3" concentric vent)Hub measurement 3 ¼”
1" metal flange against the house.
Hub measurement
u
u
u
u
u
u