7500/7700 SERIES
Transcript of 7500/7700 SERIES
7500/7700 SERIES InStItutIonal dooR cloSER
2
overview
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Features• Non-handed• Rack-and-piniondesign• Castaluminumbody• 2-3/16"(56mm)projection• 1-1/2"(38mm)diameterpiston• 5/8"(16mm)diameterpinionjournals• Stakedvalves• Standard,separateandindependent,latch,sweepand backcheckintensityvalves• Backcheckpositioningvalve• NorGlide® fluid• Moldedplasticcover• Allstandardarmapplicationsallowdoorstoswing180°, conditions permitting• Self-drillingscrews• Full-sizetemplate• Heavy-dutyarms:RegularRigid,ParallelRigid,CloserPlus®, CloserPlusSpring™andUnitrol®• SlideTracks:pushorpullsidemounting
Optional Features • Corrosionresistantmodel(non-holdopenonly). Specify7500SS• Metalcover.SpecifyMsuffix• Leadlinedmetalcover.SpecifyMLLsuffix• Enhancedbackcheck.SpecifyEBCsuffix• Delayedactionwithpressurereliefvalve• Retrofitplates
Compliance Standards • Exceeds10millioncycles(witnessedandverifiedbyUL)• ANSI/BHMAA156.4,Grade1certified• ULlisted• UL10Ccompliantforpositivepressure• ADACompliant(7500)• 25-yearlimitedwarranty
Features 7500 7700
Adjustablespringsizes1through6(ADACompliant) X
Sizedsprings2,3,4,5,6with50%poweradjustment X
Tri-Style®packaging;tri-packedforregular,topjamborparallelarmmounting
X
Bi-packedforregularortopjambmounting X
Overview ...................................................................................................................................................................................2-3How to Order ............................................................................................................................................................................... 4Fasteners/Finishes ...........................................................................................................................................................................5Features ........................................................................................................................................................................................6Optional Features ........................................................................................................................................................................6-7Special Function Door Closers ............................................................................................................................................................................ 8Suggested Specifications ..................................................................................................................................................................8Applications ..............................................................................................................................................................................9-12Technical Details ......................................................................................................................................................................13-26Accessories .............................................................................................................................................................................27-35Parts List .................................................................................................................................................................................36-49
TABLEoFCoNTENTS
Page Revised Electronically 5/13, 10/13
The7500SeriesDoorCloserofferscustomerstheidealcombinationofsuperiorperformance,strengthandquality.Idealforinteriororexterior doors in facilities that demand reliability.
3
overview
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Theseries7500doorclosersaredesignedtocomplywithrequirementsoftheAmericanswithDisabilitiesAct(A.D.A.)andANSI/BHMAstandardA117.1.Allseries7500/7700doorclosersareANSI/BHMAA156.4Grade1certified. All Nortonseries7500/7700closerswithnon-holdopenarmsarelistedbyUnderwriters’Laboratoriesforlabeledfiredoors.ThisincludescompliancetoUL10Cfor3-hourassemblies.TheproductismanufacturedinanISo9001facility.
WindstormNorton7500doorclosersareULcertifiedforinswingandoutswingsingleandpair(upto8'0"x8'0")doorassembliestoICC500forStormShelters.Additionally,the7500meetsFEMA361guidelines.
7500ispartofacompleteASSAABLoYtornadoandhurricanesheltersolutionsutilizingCecoStormPro361,CurriesStormPro361,FlemingF5doorsandframesandMcKinneySPhinges.
CAUTION: Door Closers for Low Opening Force Applications:DoorclosersinstalledinopeningsrequiredtomeettherequirementsoftheAmericansWithDisabilitiesActorANSI/BHMAStandardA117.1,whenadjustedtomeetthoserequirements,maynotprovideadequateclosingpowertodependablycloseandlatch the door.
Sweep SpeedRegulating Valve
Spring Adjustment Assembly
Spring Power Adjustment Nut
Latch Speed Regulating Valve
Backcheck CushioningRegulating Valve
Aluminum Alloy ShellPinionPiston Rack
Cutaway View Optional Delayed Action Valving
Backcheck PositioningRegulating Valve
Latch Speed Regulating Valve
Sweep SpeedRegulating ValveOptional: “DA” Delayed Action
Closing Regulating Valve
Not Used
B P S D S L
S D S L
CoMPLIANCESTANDARDS
Page Revised Electronically 5/13
7500/7700 SERIES InStItutIonal dooR cloSER
4
HoWTooRDER
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Notes:•Doorcloserwarrantybecomesvoidifitisinstalledontheexteriorsideofadoorinthe
exterior wall of a building•Itisstronglyrecommended,anditisrequiredonfiredoorassemblies,thatdoorshavingadoorcloserbehungonball-bearingoranti-frictionhingesorpivots
•Failuretousethecorrecttypeandsizefastenersmayvoidfactorywarranty•Fastenersforfire/smokedoorassembliesmustconformtoNFPA80.InsomeapplicationsadditionalfastenersmaybemandatedbyNFPA80thatarenotshippedwithNorton'sstandardproduct,suchassleevenutsorthrough-boltsandgrommetnuts
•Sizingchartsprovidedonpages13-25arebasedon1-3/4"(44mm)x7'(2.13m)standardweightdoorsswingingto110degrees.otherconditions(suchasdoorheightorweight;orwind/draftconditions)mayrequirealargersizecloser.
NoTE:Foroptimumprotectionofdoorandframeassemblies,alwaysuseauxiliarywall,floor,oroverheaddoorstop.
0 - Specifies standard arm. 3 - Indicatestopjamb(Jprefix)forframereveal0to 3"(0-76mm).7786backplateincluded. 4 - Specifiesshallow11/16”(17mm)depthslide trackforcloserwith“ST”suffix. 7 - Specifiescloserhavingasecurityarm,security coverandTorx®securityscrews(specifyhand). 8 - Specifieslow-profilearm(useprefix“P”parallel armor“J”fortopjamb).Non-holdopenonly.
77=7700sizedcloser75=7500multi-sizedcloser
None - Non-holdopenarmfunction H - Holdopenarmfunction(specifyhandwhen “PR”prefixisordered) M - Metalcover(coverishandedfortopjamb applications) MLL - Leadlinedmetalcover DA - optionaldelayedactionfeature EBC - optionalenhancedbackcheck HOSP - 7703or7704only.Hospitalholdopen (specifyhand) COUP - 7702or7703only.Couponbothholdopen (specifyhand) TEL - 7702only-Telephoneboothfunction (non-handed) ST - Slidetrack-singleleverarm(auxiliarystop recommended).Forpushside-prefixPS ST-180 - Slidetrack-singleleverarm,pullsidetrack without buffer assembly for maximum door swing(auxiliarystoprequired) ST-DE - Slidetrack-pullsidedoubleegress SS - Series7500only.Corrosion-resistantcloser. Availablewithnon-holdopenadjustablearm only;forregulararm,topjamb“J”prefixor parallelarm“P”prefix STP - 7706and7706EPdoorclosersonly,slide trackforpocketdoorapplication EP - Extrapowerdoorcloser(for7706closeronly) T- ThumbturnholdopenonCloserPlus®(CLP)or CloserPlus Spring™ (CPS)arm R - RampholdopenonCloserPlus®(CLP)arm G - ABS cover
}NoPrefix
Sizingchartsprovidedonpages13-25arebasedon1-3/4"(44mm)x7'0"(2.13m)standardweightdoorsswingingto110°.otherconditions(suchasdoorheightorweight,orwind/draftconditions)mayrequirealargersizecloser.
0-Series7500powerrange1through6
Series 7700“2”-ANSIsize2“3”-ANSIsize3“4”-ANSIsize4“5”-ANSIsize5“6” -ANSIsize6
*Fora7700SeriescloserwithalowprofilearmANDsize6spring-order 7796.
7700seriesdesignatesbi-packed(regular&topjamb).(Topjambupto 3"reveal.Forframefacelessthan3",order7786backplate.) 7500seriesdesignatesTri-Style®packaging(tri-packed). J - Topjambinstallation.Suppliedwith7786backplate2-3/4"-7"reveal, 150°swing. JL - TopjambInstallation.Suppliedwith7786backplate2-3/4"-7"reveal, 180°swing. P - 7700parallelarmonly. - 7500parallelarmunitswithspecialtybrackets. - 7580low-profilecloser. - 7500SScorrosion-resistantcloser. PR - Parallelrigidarm(parallelarmonly);specifyhandforholdopenfunctions. PRO - Parallelrigidarmwithoffsetsoffitplate(parallelarmonly);specifyhandfor hold open applications. PS - 7500ST/7540ST/7700ST/7740STforpushsidemountingonly. R - Rigidheavy-dutyregulararm.(Torx®screwsnotincluded)(N/Ain stainlesssteel) CLP - CloserPlus®arm(parallelarmonly). CPS - CloserPlus Spring™arm(parallelarmonly). UNI - Unitrol®arm(parallelarmonly-specifydoor width). Framereveals1-7/8"to4-5/8"(48-117mm)standard. UNIJ - Unitrolarm(topjambonly-specifyframe reveal).7-3/8"(187mm) maximum.
J LPREFIXES
7 5FIRST & SECOND DIGIT
Defines closer series
0THIRD DIGIT
Specifies some options
0FORTH DIGIT
Closer power sizing
HSUFFIXES
Page Revised Electronically 9/13, 10/13
5
FASTENERS
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Type DescriptionArm
RA PA TJ Low Profile PR CLP/
CPS UNI UNI-J Slide Track
DOORSDST SelfDrillingSelfTapping S S S S S S S S SMS MachineScrew S S S S S S S S SSN SleeveNut o o o o S S S S STBGN ThruBolts&GrommetNuts o o o o o o o o o SMS SheetMetalScrews o o o o o o o o oToRX® Torx Drive Security Screw o o o o o o o o o
FRAMESDST SelfDrillingSelfTapping S S S S S S S S SMS MachineScrew S S S S S S S S SSMS SheetMetalScrews o o o o o o o o oToRX Torx Drive Security Screw o o o o o o o o o
S = standard; O = optional SNareforuseonunreinforcedhollowmetaldoorsortopreventanyhollowmetaldoorfromcollapse/dimpling.Theycanalsobeusedforthruboltingonwooddoors.SNaresuppliedfor1-3/4"(44mm)thickdoorsunlessspecifiedfor2-1/4"(57mm)thickdoors.TBGNareanalternativetoSNforwooddoors.TBGNaresuppliedstandardfor1-3/4"(44mm)thickdoors.Theycanbespecifiedfor1-3/8"(35mm)thickdoors.SMS-whenspecified,closerwillbepackedwithsheetmetalscrewsforthedoorANDsheetmetalscrewsplusmachinescrewsfortheframe.TORXscrewswithsecuritypinarestandardwith7570/7770SecurityDoorClosers.Torx may be specified for all other series applications. Torx are only available with machine screw threads. Sheet metal screw threads are not available.
FINISHES
Nortonofferswaterborneacrylic,polysterpowdercoatandplatedfinishes.Customfinishesareavailableonspecialorder.Asampleandapprovalisrequired.
Waterborneacrylicandpolyesterpowdercoatwillwithstand100hoursofsaltspray(ANSIrequires25hours).
Page Revised Electronically 10/13
*600isaspecialrust-inhibitingprimecoat.Closerscanbeorderedprimecoatonly(specifycloserx600).Anadditionalchargeappliesiffinishcoatis requiredoverprimecoat.•Nortoncloserbodiesandplasticcoversareavailableinwaterborneacrylicfinishes.Armsandmetalcoversareavailableinpowdercoator plated finishes. •Whenaplatedfinishisordered,armandcoverwillbeplatedunless"coveronly"isspecified.
ANSI/BHMA US Description
600* Sri PrimeCoat
605 US3 Bright Brass
606 US4 Satin Brass
611 US9 BrightBronze
612 US10 SatinBronze
613E US10BE DarkoxidizedSatinBronze-Equivalent
625 US26 Bright Chrome
626 US26D Satin Chrome
689 AL Aluminum
ANSI/BHMA US Description
690 STAT StatuaryBronze
691 DB DullBronze
693 315 Black
694 312 MediumAmber
696 GB Gold
7500/7700 SERIES InStItutIonal dooR cloSER
6
FEATURES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Aluminum Alloy HousingCloser bodies are constructed of a special aluminum alloy, carefully selected to accommodate interactive steel components and operating conditions.
Rack & Pinion OperationProvidesasmoothconstantcontrolofthedoor through its full opening and closing cycle.180°doorswingcanbeachievedwhen door, frame, hardware and arm function do not interfere.
Non-handedWithfewexceptionsallseries7500and7700doorclosersarenon-handedandcan be installed on either right or left hand swing doors. Pinionshaftextends vertically through the closer body in both directions. Some options, as noted on pages6-8,willrequirethatthehandofthecloser be specified.
Sweep Speed Control ValveAllowsadjustmentofdoorspeedfrom thedoor'sfullopenpositiondownto approximately10°fromtheclosedposition.
Latch Speed Control ValueAllowsadjustmentofdoorspeedfromapproximately10°downtothedoor’sfullyclosed position.
Tri-Style® Packing7500comeswithscrews,bracketsandsoffitplatestoallowforregular,topjamb,and parallel arm installations.
Adjustable Backcheck Cushion ValveProvidescontrolofthedoorintheopeningcycle,beginningatapproximately75°ofdooropening.Itslows/cushionsthedooropening, when the door is forcibly opened beyonditspre-adjustedlimits.
Adjustable Backcheck Position ValveAllows the door opening position, where backcheckcushioningbegins,tobeadjustedto a greater door angle, up to a maximum of20°farther(approximately95°).
Standard Molded CoverMoldedofhigh-impactU.L.listedmaterialand covers the entire closer body assembly. Thiscoverisnon-handedforallapplications.
WarrantyThesecloserscarryalimited25-yearwarranty against defect, and life of the building on the aluminum housing.
Closer Fluid NorGlide® closer fluid is a specially formulatedmulti-viscosityhydraulicfluidthatcontainslubricityandanti-oxidationagents that provide optimum performance andefficiency.Thisfluidcomplementstheinteractionofthedoorcloser'saluminumhousing with its steel and brass components, while maintaining stable viscosity to allow the door closer to perform in temperatures ranging from extremely high to as low as -40°F.
Door Closer Power Options
Series 7700 Sized Door CloserAvailableinfivedifferentpowersizes(2,3,4,5or6).Eachpowersizeisadjustableupto50%strongerthantheminimumclosingforceforthatsize,asoutlinedinANSI/BHMAspecificationA156.4.
Series 7500 Multi-Sized Door CloserAdjustablethroughtheentirepowerrangeofdoorclosersizes1through6,asoutlinedinANSI/BHMAstandardA156.4.
Theseries7500alsoconformstotheminimumopeningforcerequirementsoftheAmericanswithDisabilitiesAct(A.D.A.)andANSI/BHMAstandardA117.1forinteriordoors.
Corrosion-Resistant Door CloserTheseries7500SSdoorcloserswithmolded plastic cover are available for use wherecorrosiveconditionsexist.Thisseriesisprovidedwithbrassadjustmentvalves,a440gradestainlesssteelpinionshaft,anall-aluminumbodyandbronzecloserarmbushings;allothercomponentsareof302/303gradestainlesssteel.Fastenersare8-18stainlesssteel.Thisproductisavailable for standard regular arm, top jambandparallelarm,non-holdopen,applications only.
Optional Metal CoverThissteelcoverisnon-handedforregularand parallel arm applications, but is handed fortopjambapplications.Coverisavailablein sprayed or architectural plated finishes.
Security CoverSupplied standard with all series 7570/7770doorclosers.Thisdeepdrawnsteel cover is handed for all applications. Thecoverisfastenedtothecloserbodyattwo points on top and to the door closer bodystand-offsattwopointsonthebottom.
Optional ABS CoverConsult factory for details
oPTIoNALFEATURES
Page Revised Electronically 5/13
7
oPTIoNALFEATURES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Non-Hold OpenSelf-closesdooreverytimedoorisopened.Auxiliarystop(byothers)requiredexceptwhenusingtheCloserPlus®,CloserPlus Spring™orUnitrol® arms.
Hold OpenAchieved by means of friction or ball anddetent/roller.Frictionholdopenhasarangeof90°to180°usingtemplatelocationandmechanicaladjustment.Balland detent or roller hold open is effective inarangeof85°to110°.
Holdopenarmdoorclosersarenotpermitted to be used on fire door assemblies.
ArmFunction
Regular Arm, Top Jamb
Parallel Arm
Parallel Rigid Arm
CloserPlus®
Parallel Arm
CloserPlus
Spring™
Parallel Arm
Unitrol®
Parallel ArmUnitrol
Top JambLow Profile
Regular, Parallel Slide Track
Non-Holdopen 3 3 85°to110° 85°to110° 85°to110° 85°to110° 3 85°to110°/180°
Holdopen 90°to180° 85°to180° 85°to110° 85°to110° 85°to110° 85°to110° N/A 85°to110°
3=180˚ trim and template permitting
Door Opening Degrees
Door Opened and Released at
Approximate Time of Delay Cycle
180° 4-5minutes
120° 2-3minutes
90° 25-30seconds
oPTIoNALFEATURESARMS
Adjustable Delayed Action ClosingAn optional hydraulic feature that adds a thirdspeedrangetotheclosingcycle.Thisfeature becomes effective when the door is opened and released at any point beyond 70°.Theamountoftimedelaydependsupon the combination of the angle of door releaseandvalveadjustment.Thevalvecanbeadjustedwitha1/8"(3mm)hexkeyfromnodelaytimeuptomaximumdelaytimesof:
Pressure Relief Safety ValveThedelayedactionhydraulicsystemcontainsa pressure relief valve. Any time the door is forced toward the closed direction while it is in the closing cycle, the valve will open andpermitthedoortoclose.Thispreventsdamage to door, frame and closer.
Suggested ApplicationsDelayedActionclosingallowsslow-movingtraffic to clear the opening before the door closer’snormalclosingcyclebegins.Thisfeature can be helpful in health care facilities such as hospitals and nursing homes. it provides sufficient time for persons on crutches or in wheelchairs to pass through a door without concern of it closing. At the sametime,itcanaccommodatethefacility'sstaff with movement of food service carts, beds, and other wheeled traffic.
Useofdelayedactionclosersonmanydoors throughout industrial and commercial buildings can also assist the flow of traffic. Locations where additional time to clear the opening is advantageous are doors between officeandfactory/warehousefacilities,doorstoworkshopsorlaboratories,tokitchenand food processing areas, etc.
Enhanced BackcheckThisfeatureprovidesadjustablebackcheckintensitybeginningatapproximately15degrees of the door opening cycle. it is intended for use in situations where the standardbackcheckbeginningatapproximately75°ofdooropeningallowstoo much unrestricted door travel to obtain control of the door without the fear of peripheral damage to the door closer, door, frame,hingesorpivots;oradjacentwallsorstructures.Thisfeatureismostfrequentlyusedin schools and detention facilities. Specify suffix eBC.
7500/7700 SERIES InStItutIonal dooR cloSER
8
SPECIALFUNCTIoNDooRCLoSER
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500 SeriesClosers for interior and exterior doors shall be fullrack-and-piniontypewithcastaluminumalloy body. Closers shall be surface mounted andshallprojectnomorethat2-3/16"(55mm)fromthesurfaceofthedoor.Closersshallbenon-handedtopermitinstallationon doors of either hand. Closer fluid shall containlubricityandanti-oxidationagents.Closer fluid shall maintain stable viscosity to allow door closer to perform in temperatures ranging from extremely high to as low as -40°F.Closersshallhavemulti-sizespringpoweradjustmenttopermitsettingofspringfromsize1throughsize6.Closersshallhavetwonon-criticalvalves,hexkeyadjusted,toindependently regulate sweep speed and latchspeed.Closersshallhavebackcheckcushioningcontrolledbyahexkeyadjustedvalve.Closersshallhavebackcheckpositioncontrolledbyahexkeyadjustedvalve.
[Closersshallhaveadjustabledelayed-actionclosingcontrolledbyahexkeyadjustablevalve.]
[Closers shall be highly corrosion resistant and shall have all external body components of aluminum, brass or stainless steel material and all fasteners of stainless steel.]
Regulararmandtopjambclosersshallhaveanon-holdopenshoepermitting15%(+/–7-1/2%)poweradjustment.**Closers shall be enclosed in a [molded resin cover] [plated or sprayed metal cover]. Closers to be Norton[7500][7500M][7500SS].
**Forspecialarmsinserttheappropriatespecification from column three on this page.
7700 SeriesClosers for interior and exterior doors shall be fullrack-and-piniontypewithcastaluminumalloy shell. Closers shall be surface mounted andshallprojectnomorethat2-3/16"(55mm)fromthesurfaceofthedoor.Closersshallbenon-handedtopermitinstallationof doors of either hand. Closer fluid shall containlubricityandanti-oxidationagents.Closer fluid shall maintain stable viscosity to allow door closer to perform in temperatures ranging from extremely high to as low as -40°F.Closersshallhavepoweradjustmenttopermita50%increaseinpowerovertheminimumclosingforceforeachsize.Closersshallhavetwonon-criticalvalves,hexkeyadjusted,toindependentlyregulatesweepspeed and latch speed. Closers shall have backcheckcushioningcontrolledbyahexkeyadjustedvalve.Closersshallhavebackcheckpositioncontrolledbyahexkeyadjustedvalve.
[Closersshallhaveadjustabledelayedactionclosingcontrolledbyahexkeyadjustablevalve.]
Regulararmandtopjambclosersshallhaveanon-holdopenshoepermitting15%(+/–7-1/2%)poweradjustment.**Closersshall be enclosed in a [molded resin cover] [plated or sprayed metal cover]. Closers to be Norton[7700][7700M].
**Forspecialarmsinsertthatspecificationhere(seecolumnthreeonthispage).
**Unitrol® ArmDoor closers shall have a fixed door stop feature effective at one point selected at installation,from85°-110°infive-degreeincrements. Door stop shall be cushioned by ashock-absorbingheavy-dutyspringactioneffective at the [soffit plate] [arm shoe] pivot. [Closers shall be provided for parallel arm installation using rigid steel main arm and secondary arm lengths proportional to the door width.] [Closers shall be provided for topjambinstallationusingsteel,rigidmainarmandtelescopingsecondaryarmadequatefor the frame reveal of the openings.]
**CloserPlus® ArmDoor closers shall have a field reversible door stop.Holdopentensionshallbeadjustableeffective at one point selected at installation, from85°-110°infivedegreeincrements.Closers shall be provided for parallel arm installation using a forged rigid steel main arm and secondary arm.
**CloserPlus Spring™ ArmDoorclosersshallhavebuilt-indoorstop[and holder] effective at one point selected atinstallation,from85°-110°infive-degree increments. Door stop mechanism shall be reversible and have a buffer spring that engages prior to the dead stop feature,reducingshockloadstothedoorand frame assembly. Door stop mechanism shallbeattachedtosoffitplate.[Holdopenmechanismshallhaveengage/disengageselection actuated by thumbturn]. Closers shall be provided for parallel installation using a forged rigid steel main arm and secondary arm.
7700 Special Function Door Closers
Telephone Booth OperationCloser holds the door to the telephone boothopenat5°fromtheclosedposition.Thispreventsthelightswitchfrombeingactivated and allows the booth to be ventilated. it also indicates to users that the booth is unoccupied. Available in size2onlyforregulararmortopjambapplication only.
Coupon Booth Hold OpenMostcommonlyusedondoorstosafedeposit box inspection cubicles. Closer holdsthedoortotheboothopenat15°to indicate that the booth is available for usebyasafe-deposit-boxrenter.Whenthedoorisopenedbeyond70°,thecloserwillclosethedoorandengagethelock,providing the occupant with the desired privacy.Availableinsizes2and3onlyforregulararm,topjamborparallelarmapplication. Specify hand.
Hospital Hold OpenCloser will hold door open at approximately 15°forventilation,45°forobservationandbeyond90°forfullaccess.
Closer is supplied with a standard hold openarmforthebeyond90°holdopenposition.Availableinsizes3and4onlyforregulararm,topjamborparallelarmapplication. Specify hand.
SUGGESTEDSPECIFICATIoNS
Page Revised Electronically 5/13, 10/13
9
APPLICATIoNS
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Regular ArmThisistheonlypull-sideapplicationwhereadoubleleverarmis used. it is the most power efficient application for a door closer.Sufficientframe,doorand/orceilingclearancemustbeconsidered.
Sincethearmassemblyprojectsdirectlyoutfromtheframe,this application may present an aesthetics issue or be prone to vandalism.
Top JambForefficiencyreasonsthisapplicationprovidesthebestalternativetotheregulararmapplication.Theremustbesufficientframefaceand/orceilingclearanceforthisapplication.Itrequiresatoprailonthedoorofjust2-1/8"(54mm).Thisapplicationprovidesthebest door control for doors in exterior walls that swing out of a building.
Theentiredoorcloserandarmassemblyprojectfromtheframe,similar to the regular arm application, where matters of appearance and malicious abuse can be of concern. Consideration must be given to depth of frame reveal.
Parallel ArmThisapplicationprovidesthemostappealingdesignappearanceforasurface-mounteddoorcloserhavingadoubleleverarm.Thisalsomakesitbeneficialinvandalism-proneareas. it is on the push side of the door and the arm assembly extends almost parallel to the door. in the closed position, there isverylittleornohardwareprojectingbeyondtheframefaceinmost situations.
Duetothegeometryofthearmitisapproximately25%lesspower-efficientthanaregulararmapplication.Theentirecloserandarmassemblyaremountedbelowtheframestop,requiringatoprailclearanceonthedoorofbetween6-5/8"(168mm),whenusingalowprofilearm,to7-1/4”(184mm),whenusingthe hold open arm.
Non-holdopenarmshown Non-holdopenarmshown
Non-holdopenarmshown
Corner BracketThisapplicationcanbeusedwheretopjambandparallelarmapplication will not accommodate the door and frame conditions. Requiresminimaltoprailonthedoor;however,verticalclearancetothefloorwithinthedooropeningshouldbecheckedtoensurecode compliance.
Thecloseproximity,forthisapplication,ofthedoorclosertothedoor’spivotpointreducesthedoorcloser’spowerefficiencybyapproximately25%whencomparedtoaregulararm.Theprojectionofthearmfromthedoorfacemightposequestionsregarding design parameters.
Non-holdopenarmshown
7500/7700 SERIES InStItutIonal dooR cloSER
10
APPLICATIoNS
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Parallel Rigid ArmAn enhanced variation of the standard parallel arm assembly that is intended for use in heavy traffic areas where auxiliary door stops are installed.
Holdopenavailable-specifyhandwhenordering.
Non-holdopenarmshown
Non-holdopenarmshown Non-holdopenarmshown
CloserPlus® ArmSimilartotheParallelRigidarm,thisarmincorporatesastopatthearm’ssoffitplatetodeadstopthedooratapredetermineddegreeofdoorswingbetween85°and110°,in5°increments.Priortodeadstopthedoorcloser’sbackcheckfeatureslowsthedoorspeed to reduce the impact of the stop action.
The CloserPlus arm is intended for use where an auxiliary door stopcannotbeutilizedandnomorethanmoderateabuseisanticipated. where more extreme conditions are expected, use of aUnitrol® arm is recommended.
Holdopenstrengthisadjustable.
CloserPlus Spring™
ThisarmhasallofthecharacteristicsoftheCloserPlus arm with an additional steel buffer spring that provides greater protection at the end of the door opening cycle.
Forextremeconditions,useofaUnitrol arm is recommended. Available with or without hold open.
Page Revised Electronically 10/13
11
APPLICATIoNS
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Non-holdopenarmshown
Unitrol® ArmCanbeusedforeitherparallelarmortopjambapplications.Unitrol arms combine the features of a double lever arm overhead door stop/holderwiththebackcheckfeatureofthedoorclosertoreducedoorstoppingshockloadstoaminimum.TheUnitrol uses a compressionspringbufferatthesoffitplate/armshoethatwillabsorb30lbf.offorce,5°priortothedoor’sdeadstop.Coupledwiththedoorcloser’sbackcheckfeature,thisarmprovidesthemostcontrolledstopavailablewithasurfacedoorcloser.
Forparallelarmapplicationstherearethreedifferentlengtharmassemblies.Eachlengthisdesignedforaspecificrangeofdoorwidthstoprovideprecisedoorcontrol.Thisfurtherlessensthedeadstopimpactonthedoor’shinges/pivots.
Unitrol®ParallelArm
Regular Rigid Heavy-Duty ArmThisdoubleleverarmfeaturesanon-adjustablesecondaryarm.orbitallyrivetedjointspreventtamperingordisassembly.Prefix“R”tomodelnumber.Availablenon-holdopenonly.
Unitrol®TopJamb
Parallel Rigid Offset ArmThisheavy-dutyparallelrigidarmprovidesadditionalverticalclearance.Itiswellsuitedforapplicationswhereweather-strippingorotherhardwarepreventstheuseofthestandardParallelRigid(PR)soffitplate.Thenon-holdopenandholdarmsallow1-1/4"clearance.Whenusedinconjunctionwitha#6891spacerblock,thePRoarmprovides1-7/8"clearancetoaccommodatetheuseofasurfaceoverheadstop/holder.
7500/7700 SERIES InStItutIonal dooR cloSER
12
APPLICATIoNS
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Low Profile ArmSuppliedwith7580/7780seriesdoorclosersfornon-holdopeninstallationsonly.Lowprofilearmshaveareducedheightelbowjointandastraightmainarm.Thisenablesthedoorclosertobeinstalledinlessverticalspace.
Slide TrackWhetherpullorpushsidemounted,slidetrackapplicationsprovidethedesignerwiththesmoothestlinesavailableinasurfacemounteddoorcloser.Thesingleleverarmallowscomponentstobelocatedinastackconfigurationtominimizeprojectionandeliminateobtrusivearmangles.Thearmgeometryreducesdoorcloserpowerefficiencybyapproximately25%fromthatofaregulararm.
Avariationofthestandardslidetrackapplicationisavailableforpocketdoors,whereitisdesirabletohavethedoorclosercompletelyconcealedwhenthedoorisinthe90°openposition.Seepage26fordetails.
Standard Unit:• Adjustable85°to110°(holdopenandnon-holdopen).Trackissuppliedwithaspringbufferedstop.Anauxiliarystop,byothers, is recommended.• Specifyifholdopenunitisrequired.• 180°swing(non-holdopen,pullsideonly)isalsoavailable.Thistrackassemblyrequiresthatadoorstop,byothers,besuppliedto stop the door.
PullSide LowProfilePullSide
LowProfilePushSidePushSide
Regular Arm-regular Arm allows closer to be installed where thereisaslittleas1"(25mm)offramefaceorceilingclearance.
Parallel Arm-ParallelArmallowsclosertobeinstalled1/2"(13mm)higherupondoorthanstandardparallelarmapplication.
13
REGULARARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
3-1/2"(89)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
4-1/8"(105)
1-3/4"*(44)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.*Thisdimensionwillvary.Standardnon-holdopenarmillustrated.
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open
32"(81) 30"(76) 7702 7702H
7500 7500H
38"(97) 34"(86) 7703 7703H
48"(122) 42"(107) 7704 7704H
54"(137) 48"(122) 7705 7705H
UnusualConditions 7706 7706H
Note:Contactfactoryifdoorweightexceeds250lbs.
7500/7700 SERIES InStItutIonal dooR cloSER
14
ToPJAMBARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
1-7/8"*(48)
13-5/8"(346)
Hinge
5/8"(16)
Reveal
Ref
2-1/8"(54)
3-7/8"(98)
S
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.*Minimumframefacewith7786dropplate.3-1/4"(83mm)requiredwhendropplateisnotused.
Model NumberReveal Range
Inches
MaximumDoor
Opening
Multi-Sized Sized Non-Hold Open Arm
7500/7500M 7700/7730M0"to3"
(0to76mm) 180˚
J7500 J7700 2-3/4" to 7"(70to178mm)
150˚
JL7500 JL7700 2-3/4" to 7"(70to178mm) 180˚
J7580x7787 J7780x7787 0"to2-3/4"(0to70mm) 180˚
Multi-Sized Sized Hold Open Arm
J7500/J7530MH J7700H/ J7730MH
0" to 3"(0to76mm) 180˚
J7500H J7700H 2-3/4"to6-3/4"(70to171mm) 150˚
JL7500H JL7700H 2-3/4"to6-3/4"(70to171mm) 180˚
SMinimum Top Rail of Door
Without Drop Plate or with 7786 Back Plate (mm) With 7787 Drop Plate (mm)
J7700/J7730MJ7700J7500/J7530MJ7500
J7700H/J7730MHJ7700HJ7500H/J7530MHJ7500H
J7780J7580
J7700/J7730MJ7700J7500/J7530MJ7500
J7700H/ J7730MHJ7700HJ7500H/J7530MHJ7500H
J7780J7580
2"(51mm)
2-1/2"(64mm) N/A 4-1/8"
(105mm)4-5/8"(117mm)
3-5/8"(92mm)
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Non-Hold Open Hold Open Non-
Hold Open Hold OpenInterior Exterior
32"(81) 30"(76) J7702JL7702
J7702HJL7702H
7500J7500JL7500
7500HJ7500HJL7500H
38"(97) 34"(86) J7703JL7703
J7703HJL7703H
48"(122) 42"(107) J7704JL7704
J7704HJL7704H
54"(137) 48"(122) J7705JL7705
J7705HJL7705H
UnusualConditions J7706JL7706
J7706HJL7706H
15
PARALLELARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
5/8" Ref(16)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
6-1/2"*(165)
1-3/4"*(44)
R
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.*Thisdimensionwillvary.Standardnon-holdopenarmillustrated.
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Non-Hold Open Hold Open Non-Hold Open Hold OpenInterior Exterior
30"(76) — P7702 P7702H
7500 7500H
36"(91) 30"(76) P7703 P7703H
42"(107) 36"(91) P7704 P7704H
48"(122) 42"(107) P7705 P7705H
54"(137) 48"(122) P7706 P7706H
R (inches/mm)Minimum Top Rail of Door
with 5/8" (16mm) Frame Stop
Without Drop Plate With 7788 Drop Plate
P7700 P7700H P7780 P7700H P7780
5-7/8"(149)
6-1/4"(159)
5-3/8"(137)
2-3/4"(70)
1-7/8"(48)
Note:Contactfactoryifdoorweightexceeds250lbs.
7500/7700 SERIES InStItutIonal dooR cloSER
16
PARALLELRIGIDARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
5/8" Ref(16)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
6-1/2"*(165)
1-3/4"*(44)
5-7/8"(149)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Exterior Non-Hold Open Hold Open* Non-Hold Open Hold Open*
30"(76) — PR7702 PR7702H
PR7500 PR7500H
36"(91) 32"(81) PR7703 PR7703H
42"(107) 36"(91) PR7704 PR7704H
48"(122) 42"(107) PR7705 PR7705H
— 48"(122) PR7706 PR7706H
*Specify hand when ordering.
Note:Contactfactoryifdoorweightexceeds250lbs.
17
CLoSERPLUS®ARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
5/8" Ref(16)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
6-1/2"(165)
1-3/4"*(44)
5-7/8"(149)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Exterior Non-Hold Open ThumbturnHold Open
Ramp Hold Open
Non-Hold Open
ThumbturnHold Open
Ramp Hold Open
30"(76) — CLP7702 CLP7702T CLP7702R
CLP7500 CLP7500T CLP7500R
36"(91) 32"(81) CLP7703 CLP7703T CLP7703R
42"(107) 36"(91) CLP7704 CLP7704T CLP7704R
48"(122) 42"(107) CLP7705 CLP7705T CLP7705R
— 48"(122) CLP7706 CLP7706T CLP7706R
Note:Contactfactoryifdoorweightexceeds250lbs.
Page Revised Electronically 10/13
7500/7700 SERIES InStItutIonal dooR cloSER
18
CLoSERPLUSSPRING™ARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Exterior Non-Hold Open ThumbturnHold Open Non-Hold Open Thumbturn
Hold Open
30"(76) — CPS7702 CPS7702T
CPS7500 CPS7500T
36"(91) 32"(81) CPS7703 CPS7703T
42"(107) 36"(91) CPS7704 CPS7704T
48"(122) 42"(107) CPS7705 CPS7705T
— 48"(122) CPS7706 CPS7706T
5/8" Ref(16)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
6-1/2"(165)
1-3/4"(44)
5-7/8"(149)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Note:Contactfactoryifdoorweightexceeds250lbs.
19
REGULARRIGIDHEAvY-DUTYARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
CL Hinge
3-1/2(89)
14-1/2(368)
4(102)
2-1/8(54)
1-7/8(48)
4-1/4(108)
Maximum Door WidthInches (cm)
Model Number
Non-Hold Open Only
Interior Exterior Sized Closers Multi-Sized Closers
36"(91) 30"(76) r7702
r7500
42"(107) 36"(91) r7703
46"(122) 42"(107) R7704
54"(137) 48"(122) R7705
— 52"(132) R7706
Note:Contactfactoryifdoorweightexceeds250lbs.
7500/7700 SERIES InStItutIonal dooR cloSER
20
PARALLELRIGIDoFFSETARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
5/8" Ref(16)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
1-1/2"^(38)
1-3/4"(44)
R
2-7/8"(73) Min.
S
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.^Ifclearancegreaterthan1-1/2"isneeded,6891spacerblockisrequired.
R (inches/mm)Minimum Top Rail of Door
with 5/8" (16mm) Frame Stop
SMinimum Top Rail of Door
Without6891Spacer with6891Spacer Without6891Spacer With6891
Spacer
7-1/8"(181)
7-5/8"(194)
7-5/8"(194)
8-1/8"(206)
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Exterior Non-Hold Open Hold Open* Non-Hold Open Hold Open*
30"(76) — PRo7702 PRo7702H
PRo7500 PRo7500H
36"(91) 32"(81) PRo7703 PRo7703H
42"(107) 36"(91) PRo7704 PRo7704H
48"(122) 42"(107) PRo7705 PRo7705H
— 48"(122) PRo7706 PRo7706H
*Specify hand when ordering.
Note:Contactfactoryifdoorweightexceeds250lbs.
21
PARALLELUNITRoL®ARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
5/8" Ref(16)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
5-3/4"(146)
6-3/8"(162)
W
Door Widthinches/cm
WArm Extension Beyond Closer
28-32"(71-81)
8-5/8"(219)
33-41"(84-104)
10-1/8"(257)
42-48"(107-122)
11-1/2"(292)
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.Door width must be specified when ordering.
Use6190bracketforreveals1-7/8"-4-5/8"(48to117mm).Revealsinexcessof4-5/8"(117mm)requireuseofa6191reinforcingkit.Revealsto1/8”(3mm)requireuseofa2019Langlebracket.
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open
30"(76) — UNI7702 UNI7702H
UNI7500 UNI7500H x Specify Door width
36"(91) 30"(76) UNI7703 UNI7703H
42"(107) 36"(91) UNI7704 UNI7704H
48"(122) 42"(107) UNI7705 UNI7705H
— 48"(122) UNI7706 UNI7706H
Note:Contactfactoryifdoorweightexceeds250lbs.
7500/7700 SERIES InStItutIonal dooR cloSER
22
ToPJAMBUNITRoL®ARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
5/8" Ref(16)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
P
4-5/8"(117)
M
Reveal*
S
^ supplied standard with closer
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.*Revealsuptoamaximumof7-3/8"(187mm).Reveal must be specified when ordering.
Backplates MMinimum Frame Face
PMinimum Ceiling Clearance
SMinimum Top Rail Clearance
7786^ 1-5/8"(41)
3-1/8"(79)
2-1/4"(57)
7787 1-7/8"(48)
3-1/2"(89)
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open
34"(86) — UNIJ7702 UNIJ7702H
UNIJ7500 UNIJ7500H xSpecifyFramereveal
42"(107) 34"(86) UNIJ7703 UNIJ7703H
48"(122) 42"(107) UNIJ7704 UNIJ7704H
54"(137) 48"(122) UNIJ7705 UNIJ7705H
— 54"(137) UNIJ7706 UNIJ7706H
Note:Contactfactoryifdoorweightexceeds250lbs.
23
PULLSIDESLIDETRACK
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
3-1/2(89)
R
HINGEOR PIVOT
23(584)
13-5/8(346)
1-1/2(38) 3-7/8
(98)
2-1/8(54)
4-1/8(105)
1-1/2(38)
2(51)
1-Unitscanalsobemountedwiththecloserbodyonthejamb.Prefixthemodelnumberwitha“J”.Wheretheframefaceislessthan3-3/8"(86mm)anumber7786JPbackplatewillberequired.
2-Unitscanalsobeinstalledondoubleegressdoorsusingahandedarmthatwillaccommodatetheframeprofile.Suffixthemodelnumberwith“DE”.Forrevealranges1/4"to3"(6to76mm).
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.
Maximum Door WidthInches (cm)
Model Number 1, 2
Sized Closers Multi-Sized Closers
Non-Hold Open Hold Open Non-Hold Open Hold Open
Interior Exterior 85°-100° 85°-180° 85°-100° 85°-100° 85°-180° 85°-100°
32"(81) — 7704ST 7704ST-180 7704STH
7500ST 7500ST-180 7500STH38"(97)
32"(81) 7705ST 7705ST-180 7705STH
48"(122)
38"(97) 7706ST 7706ST-180 7706STH
R (inches/mm)Minimum Top Rail of Door
with Frame Stop
Without Drop Plate With 7786Drop Plate
3-1/2"(111) 2-5/8"(67)
Note:Contactfactoryifdoorweightexceeds250lbs.
7500/7700 SERIES InStItutIonal dooR cloSER
24
PUSHSIDESLIDETRACK
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Exterior Non-Hold Open85°-110°
Hold Open85°-110°
Non-Hold Open85°-100°
Hold Open85°-100°
32"(81) — PS7704ST PS7704STH
PS7500ST PS7500STH38"(97)
32"(81) PS7705ST PS7705STH
48"(122)
38"(97) PS7706ST PS7706STH
5(57)
23(584)
13-5/8(346)
HINGEOR PIVOT
1-1/2(38) 3-7/8
(98)
2-1/8(54)
1-1/2(38)
6-1/2(165)R
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.
R (inches/mm)Minimum Top Rail of Door with Frame Stop
Without Drop Plate With 7788 Drop Plate
6"(152) 2-5/8"(67)
Note:Contactfactoryifdoorweightexceeds250lbs.
25
LoWPRoFILEPULLSIDESLIDETRACK
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
2-1/4"(57)
13-5/8"(346)
Hinge or Pivot
3-7/8"(98)
2-1/8"(54)
4-5/8"(117)
R
25"(635)
21/32"(17)
1"(25)
1-1/8"(29)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
R (inches/mm)Minimum Top Rail of Door with Frame Stop
Without Drop Plate With 7786 Drop Plate
3-1/2”(89) 2”(51)
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Non-Hold Open Hold Open Non-Hold Open Hold Open
32"(81) 7744ST 7744STH
7540ST 7540STH38"(97) 7745ST 7745STH
48"(122) 7746ST 7746STH
Note:Contactfactoryifdoorweightexceeds250lbs.
7500/7700 SERIES InStItutIonal dooR cloSER
26
LoWPRoFILEPUSHSIDESLIDETRACK
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Maximum Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Non-Hold Open Hold Open Non-Hold Open Hold Open
32"(81) PS7744ST PS7744STH
PS7540ST PS7540STH38"(97) PS7745ST PS7745STH
48"(122) PS7746ST PS7746STH
5-7/8(149)
1(25)
R
2-1/8(54)
3-7/8(98)
21/32(17)
25(635)
13-5/8(346)
4-5/16(110)
HINGEOR PIVOT
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
R (inches/mm)Minimum Top Rail of Door with Frame Stop
Without Drop Plate With 7788 Drop Plate
5-1/4"(133) 3-5/8"(92)
Note:Contactfactoryifdoorweightexceeds250lbs.
27
PoCKETDooR7706STP
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
PIVOT
PIVOT
Min.2-1/4"(57)
3/4"(19)
5-1/2"(140)
HINGE OR PIVOT
Ref. – Top of Wall Pocket
2-1/4"(57)
4-1/4"(108)
Pocket Depthto
Door
Slide Track
7706STP or 7706EP-STP Series ClosersSlide Track for 90° Wall Pocket InstallationFor Pocket Depths 2-1/4" to 4-1/4" (57mm to 108mm) (See Chart for Closer Sizing)
5-1/2"(140)
23"(584)
3/4"(19)
PIVOT
Ref. – Top of Wall Pocket
3-5/8"(92)
13-5/8"(346)
6-3/8"(162)
IF POCKET PIVOT
6-3/8(162)
3-5/8(92)
13-5/8"(346)
4-1/4"(108) Max.
PIVOT
PIVOT
IMPoRTANTWallReinforcement(byothers)MustBeSufficienttoWithstand
Door Action
IMPoRTANTWallReinforcement(byothers)
MustBeSufficienttoWithstandDoorAction
See chart (above) for closer sizing.
Closer Sizing Chart (cm)
Maximum Door Width Closer
42"(107) 7706STP
48"(122) 7706EP-STP
Note:Contactfactoryifdoorweightexceeds250lbs.
7500/7700 SERIES InStItutIonal dooR cloSER
28
RETRoFITPLATE
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Model Number Replaces
RP75-4040 LCN-4040
RP75-4010 LCN-4010
RP75-M2020 rixson®M2020
Metaltemplateshelptheinstallerlocatethecorrectmountingholesforseveralparallelarmapplications.
Model Number Arm Applications
P77MT ParallelArm(NHoonly)ParallelRigid,CloserPlus®,CloserPlusSpring™
Theretrofitplatesallowthe7500doorcloserstoreplacethe4040or4010closerswithoutmodifyingtheexistingholepatterninthedoor.Theplateswillworkwithregularandparallelarmapplications.
Note: The location of the arm shoe on the frame will change, therefore the frame must be patched.
29
REGULARARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Narrow Top Rail - #7786 Drop Plate:Forusewherethenarrowtop rail of the door prevents the closer from being mounted directlytothedoorsurface.Thisdropplatemustbeusedforclosermountedonatoprailbetween1-7/8"and3-3/8"(48and86mm)inheight.
Molded/Bull Nose Trim - #2403B Bracket: Forusewherethedoor frame has molded or bull nose trim which will not accept astandardnon-holdopenshoe.Thebracketismortisedintotheframerabbet,andprojectsbeyondthefaceoftheframe.Itwillaccommodateaframerabbetupto2"(51mm)deep.
Molded/Bull Nose Trim - #2403-3/4 Bracket: Thisbracketissimilarto-butlongerthan-the2403Bbracket.Itisdesignedtoaccommodateframerabbetsfrom2"to2-7/8"(51to73mm)deep.
Molded/Bull Nose Trim - #80 Bracket:Forusewherethedoorframe has molded or bull nose trim which will not accept a standard hold open shoe. it is mortised into the frame rabbet, and projectsbeyondthefaceoftheframe.Itwillaccommodatearabbetupto2"(51mm)deep.Thisbracketisusedincombinationwith the standard hold open mounting shoe.
Brackets for Hold Open Arms
Brackets for Non-Hold Open Arms
13-5/8"(346)
3-15/8"(100)
Overhead Door Holder - #7786OH Drop Plate:Forusewherea surface or concealed overhead door holder prevents normal arm mounting screws to clear the bottom of the door holder. Thisplacesthecenterlineofthearmmountingscrewsat2-7/8"(73mm)fromthetopofthedoor.
13-5/8"(346)
3-7/8"(98)
3"(76)1-1/2"
(38)
3-5/16"(84)
2-1/16"(52)
2-1/2"(64)
1-7/16"(37)
3-3/4"(95)1-1/2"
(38)
Closer Mounting Plate
7500/7700 SERIES InStItutIonal dooR cloSER
30
REGULARARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Narrow Frame - #7786 Back Plate:Forusewhereanarrowframe face prevents the closer from being mounted directly to the frame.Thisbackplatemustbeusedforclosermountedonaframebetween1-7/8"and3-1/8"(48and79mm)inheight.
Closer Mounting Plates
Low Ceiling Clearance - Overhead Door Holder - #7787 Drop Plate:Forusewheretheceilingclearanceisbetween1-7/8"and3-7/8"(48and98mm)orwhereasurfaceorconcealedoverheaddoorholderpreventsnormaltopjambmounting.Thisplate drops the closer and allows the arm mounting screws to clearthebottomofthedoorholder.Thisplacesthecenterlineofthearmmountingscrewsat3-1/8"(79mm)fromthetopofthedoor.
ForclosersizinginformationusetheParallelArmSizingChartonpage15.Theuseofacornerbracketrequiresadoorcloseroftheopposite hand from that of the door when ordering handed closers.
Mounting Opposite Hinge Side - #7798 Standard Drop Corner Bracket:Forusewhereitisdesiredtomountaregulararmnon-hold open closer.
Extra-Drop Mounting Opposite Hinge Side - #7797 Corner Bracket:Forusewhereitisdesiredtomountaregulararmholdopencloser,orwhereitisnecessaryforaregulararmnon-holdopenclosertoclearaseparateoverheaddoorholder.Thisbracketdropsthecloser1-1/8"(29mm)lowerthanthe#7798CornerBracket.
Corner Brackets for Closer Mounting
3-15/16"(100)
13-5/8"(346)
13-5/8"(346)
4-1/8"(105)
6"(152)
6-1/8"(156)
16-3/8"(416)
7"(178)
6"(152)
7-1/4"(184)
16-3/8"(416)
7"(178)
ToPJAMB
31
PARALLELARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Narrow Top Rail - #7788 Drop Plate:Forusewhereanarrowtop rail prevents the closer from being mounted directly to the doorsurface.Thisdropplatecanbeusedtomountacloseronatoprailasnarrowas2-1/2"(64mm)inheight.
Closer Mounting Plate
Standard Installation - #1618 Soffit Plate: Supplied standard with parallel arm closers. it can be mounted where the frame soffitisasnarrowas1"(25mm).Specify1618A-SS for stainless steel soffit plate.
Narrow Frame/Removable Stop - #2018B Soffit Plate:Forusewhere a narrow frame or frame with removable stop does not permituseofthestandardsoffitplate.Thissoffitplatemaybemounted on the frame soffit or the frame rabbet where the stop doesnotexceed5/8"(16mm)inheight.Allofthescrewholesareinastraightline,requiringaslittleas1-1/4"(32mm)offramerevealtomountbracketandmaintaingoodcloserarmgeometry.Wheretheframesoffitisaswideas2"(51mm),thissoffitplatemaybeusedtoclearweather-strippingthatisupto1-3/8"(35mm)wideand5/8"(16mm)inheight.
Brackets for Non Hold Open Arms
13-5/8"(346)
5-1/8"(130)
3-1/2"(89)
4-7/8"(124)
1-1/2"(38)
3"(76)
3-5/8"(92)
2"(51)
2-3/16"(56)
Mounting between Doors - #2018 Soffit Bracket:Forusewhere insufficient space between companion doors does not permituseofothersoffitplates.Thisbracketpermitsmountingofthecloserbetweendoorswithaslittleas3"(76mm)ofheaderspace.Permitscloserarmtoclearupto5/8"(16mm)high stop.
Blade/Applied Stop - #2018D Soffit Plate: Forusewherea blade or applied stop does not permit installation of the standardsoffitplate.Mountstoeithertheframesoffitorrabbet.Sincethissoffitplateprojects7/8"(22mm)lessthanastandardsoffitplate,itrequiresaminimumframerevealof1-1/2"(38mm).Permitsclosertoclearuptoa5/8"(16mm)stop.
4"(102)
3-1/2"(89)
7500/7700 SERIES InStItutIonal dooR cloSER
32
PARALLELARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Flush Transom - #2022 Angle Bracket:Forusewhererabbeted or flush transom conditions prevent installation of a soffitplate.Usedincombinationwiththe1618soffitplate,ormaybeusedincombinationwiththe2018Ssoffitplatewhenit is necessary for the closer arm to clear a separate overhead door holder.
Brackets for Non Hold Open Arms (continued)
Extra-Clearance - #2018S Offset Soffit Plate:Forusewherethe need for additional clearance prevents use of the standard soffitplate.Thisplatemountstotheframesoffittoprovideupto2"(51mm)ofclearancewhenaseparateoverheaddoorholderisused.Standardmountingrequiresa2-5/8"(67mm)wide frame soffit. it may also be used where unusually high framestopsorweather-strippingpreventtheuseofothersoffitplates.
Parallel Hold-Open - #1628H Adapter Plate: Supplied standardwithallparallelarmhold-openclosers.Itcanalsobeusedtoconvertregulararmortopjambhold-openarmstoparallel arm installation. it can be mounted where the frame soffitisasnarrowas1"(25mm).
Flush Transom Hold-Open - #2022 Angle Bracket:Forusewhere rabbeted or flush transom conditions prevent installation ofthestandard1628Hhold-openadapterplate.Itisusedincombinationwiththe1628Hadapterplate.
Brackets for Hold Open Arms
3-1/2"(89)
2-1/2"(64)
1-1/2"(38)
3-1/2"(89)
3-1/2"(89)
1-15/16"(49)
3-1/2"(89)
4-9/16"(116)
2-9/16"(65)
3-1/2"(89)
1-1/2"(38)
2-1/2"(64)
33
PARALLELRIGIDARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Narrow Top Rail - #7788 Drop Plate: Forusewhereanarrowtop rail prevents the closer from being mounted directly to the door surface.Thisdropplatecanbeusedtomountacloseronatoprailasnarrowas2-1/2"(64mm)inheight.
Closer Mounting Plate
Narrow Frame - #6890 Support Bracket:Forusewherethe frame is narrow, and the soffit plate cannot be mounted directlytotheframesoffitorrabbet.Usedincombinationwiththe#6891SpacerBlockonbladestopframestoprovideextrasupportandneededclearanceofthebladestop.Usedonframeswheretheframestopdoesnotexceed5/8"(11mm)inheight.
Clearance/Support Blade Stop - #6891 Spacer Block:Foruse where the door frame has a blade stop and the soffit platemustbemountedontheframerabbet.Thisaccessoryisusedincombinationwiththestandardspacerblocktoprovide clearance of the blade stop.
13-5/8"(346)
5-1/8"(130)
Standard - #2019S Spacer Block:Forusewhereanarrowframesoffitdoesnotprovideadequatesupportforthesoffitplate. Supplied as standard with all parallel rigid arm closers.
Flush Rabbeted Transom - #2019L Angle Bracket: Forusewhere flush transom conditions prevent mounting of the standardsoffitplate.Thisbracketisusedincombinationwiththe standard soffit plate.
7/8"(22)
5/8"(16)
1/2"(13)
3-1/2"(89) 2-1/2"
(64)
3"(76)
1-1/2(38)
1-1/2(38)
2"(51)
Brackets for Non-Hold Open Arms & Hold Open Arms
1/2"(30)
1"(25)
3-3/8"(86)
7500/7700 SERIES InStItutIonal dooR cloSER
34
CLoSERPLUS®ARMS
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Standard - #2019S Spacer Block:Forusewhereanarrowframesoffitdoesnotprovideadequatesupportforthesoffitplate.Supplied as standard with all parallel rigid arm closers.
Narrow Frame - #6890 Support Bracket:Forusewheretheframeis narrow, and the soffit plate cannot be mounted directly to the framesoffitorrabbet.Usedincombinationwiththe#6891SpacerBlockonbladestopframestoprovideextrasupportandneededclearanceofthebladestop.Usedonframeswheretheframestopdoesnotexceed5/8"(11mm)inheight.
Clearance/Support Blade Stop - #6891 Spacer Block:Foruse where the door frame has a blade stop and the soffit plate mustbemountedontheframerabbet.Thisaccessoryisusedincombinationwiththestandardspacerblocktoprovideclearanceof the blade stop.
Narrow Top Rail - #7788 Drop Plate:Forusewhereanarrowtop rail prevents the closer from being mounted directly to the doorsurface.Thisdropplatecanbeusedtomountacloseronatoprailasnarrowas2-1/2"(64mm)inheight.
Flush Rabbeted Transom - #2019L Angle Bracket:Forusewhereflush transom conditions prevent mounting of the standard soffit plate.Thisbracketisusedincombinationwiththestandardsoffitplate.
Closer Mounting Plate
Brackets for Non-Hold Open Arms & Hold Open Arms
7/8"(22)
5/8"(16)
1/2"(13)
3-1/2"(89) 2-1/2"
(64)
3"(76)
1-1/2(38)
1-1/2(38)
2"(51)
13-5/8"(346)
5-1/8"(130)
1/2"(30)
1"(25)
3-3/8"(86)
35
UNITRoL®ARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Narrow Top Rail - #7788 Drop Plate:Forusewhereanarrow top rail prevents the closer from being mounted directlytothedoorsurface.Thisdropplatecanbeusedtomountacloseronatoprailasnarrowas2-3/8"(60mm)inheight.
Additional Support - #6190 Reinforcing Bracket: Standard forusewithallParallelArmUnitrolDoorControls.Providesadditional support to the soffit plate on installations with door framerevealsfrom1-7/8"to4-5/8"(48to117mm).
Wide Frame - #6191 Reinforcing Kit: optional for use with allParallelArmUnitrolDoorControls.Usedtosupportthesoffit plate on installations with wide frames. Clamps may be usedwithorwithoutthespacerblock,dependingonframeconditions.
Standard Installation - #7786 Back Plate: Can be mounted whereaframefaceisasnarrowas1-5/8"(41mm)inheight.
Minimum Ceiling Clearance - #7787 Drop Plate:Forusewheretheceilingclearanceisaslittleas1-7/8"(48mm).
13-5/8"(346)
5-1/8"(130)
2-1/4"(57) 5/16"
(8)
2-1/4"(57)
3-1/2"(89) 2-1/2"
(64)
1-1/2"(38)
Flush Rabbeted Transom - #2022 Angle Bracket: optional forusewithallParallelArmUnitrolDoorControls.Foruse where rabbeted or flush transom conditions prevent installationofthesoffitplateassembly.Thisbracketfastenstothe overhead transom to provide a mounting surface for the soffit plate assembly.
2-1/4"(57)
5/8"(16)
2-3/4"(70)
5/8"(16)
5/8"(16)
4-1/8"(105)
Minimum
3-15/16"(100)
13-5/8"(346)
13-5/8"(346)
4-1/8"(105)
Closer Mounting Plate (for Parallel Arm)
Closer Mounting Plate (for Top Jamb)
Soffit Plate Reinforcing Brackets (for Parallel Arm)
7500/7700 SERIES InStItutIonal dooR cloSER
36
SLIDETRACK
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
3-7/8"(98)
13-3/8"(340)
Track
Reveal
Slide Track - #7786JP Back Plate: Requiredforframeswithstandard2"(51mm)profileface.Withoutplate,minimum4"(102mm)faceframerequired.
37
DooRCLoSERBoDYASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Door Thickness SN's SNB's
1-3/4" SN-134 SNB134-47
2" NA SNB200-47
2-1/4" SN-214 SNB214-47
S.S. SNB'S 1-3/4"
(Stainless Steel)
SN-134SS SNB134SS-47
Door Thickness TBGN's
1-3/8" TBGN138-47
1-3/4" TBGN134-47
Sleeve Nut: “SN” (4 per pack)or
Sleeve Nut & Screw: “SNB” (4 per pack)
Steel Door Application
LAP=LessAllParts*SpecifySizeWhenordering
Model Number Description
7500LAP Multi-SizeCloserBody
7500SSLAP Corrosion resistantCloser Body
770*LAP SizedCloserBodyTorx© Screw Pack
Arm Type ModelNumber
Regular,TopJamb&Parallel TX47
ParallelRigid,CloserPlus®
CloserPlus Spring™PRTX47
regular rigid Heavy-Duty RTX47
Unitrol® Arm UNITX47
Through-Bolt & Grommet Nut:
“TBGN” (4 per pack)
Aluminum and Wood Door Application (Aluminum Door Shown)
CloserSeries
CoverMaterial Model No. Dimensions (Inches/mm)
7500/7700
Plastic 7700P&7700PG 13-3/4(349)x4"(102)x2-1/8"(54)
Metal 7700M 13-5/8"(346)x3-7/8"(98)x2-3/16"(56)
Page Revised Electronically 5/13
7500/7700 SERIES InStItutIonal dooR cloSER
38
NoN-HoLDoPENARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Closer Series Complete Arm Assembly
Main Arm Assembly1 (length)(mm) (includes
7701-ES)
Secondary Arm Assembly
(includes 7701-ES)
Arm AssemblyLess Rodand Shoe
Rod & Shoe Assembly2
(length) (mm)
7500/7700 7701-17701-1M(11)(279)
7701-1117701-1W
7701-11(8-7/8)(225)
J7500/J7700 7701-1A 7701-121 7701-11A(12-9/16)(319)
JL7500/JL7700 7701-1B 7701-2M(13-1/2)(343) 7701-131 7701-2W 7701-11B
(15-3/16)(386)
P7500/P7700 7701-57701-1M(11)(279)
7701-1157701-1W
7701-15(8-7/8)(225)
P7500/P77003 7701-5A 7701-115A 7701-15A(12-9/16)(319)
75007701-25(tri-packedincludes7701-1plus1618plate)
1. C to C length shown in parentheses.2. C of connecting link to end of rod shown in parentheses.3. For 180° door swing when using a special template for doors hung on 6" to 8" (152 to 203mm) wide throw hinges.
Note: Mounting hardware included with all parts orders.
SoffitPlate1618
IncludesScrew&washer Assembly(7701-5armonly)
Screw&WasherAssembly7701-ES
Arm ShoeScrew*
Arm Shoe
Arm ShoeSexNut*
Secondary Arm Assembly
Screw&WasherAssembly7701-ES
Rod&ShoeAssembly(includes7701-AS
or1618)
Arm AssemblyLessRod&Shoe
7701-ATAdjustingTube
MainArm
7701-HSHexScrew
Arm Shoe Assembly7701-AS
(7701-1armonly)
7701-MAS - Main Arm Screw (not shown)
*order138x142forArmShoeScrewandArmShoeSexNutonly.
39
STAINLESSSTEELARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
1. C to C length shown in parenthesesNote: Mounting hardware included with all parts orders.
Arm ShoeScrew
Arm Shoe
Arm ShoeSexNut
SoffitPlate1618A-SS
IncludesScrew&washer Assembly(7701SS-6armonly) Arm Shoe
Assembly7701SS-AS
Secondary Arm Assembly
(Includes7701SS-AS)
Screw&WasherAssembly7701SS-ES
MainArm
Screw&WasherAssembly
(7701SS-ESarmonly)
Closer Series Complete Arm AssemblyMain Arm Assembly
(length)(mm)(includes 7701SS-ES)
Secondary Arm Assembly (includes 7701SS-ES)
7500SS 7701SS-1
7701SS-1M(11)(279)
7701SS-111
J7500SS 7701SS-1A 7701SS-121
P7500SS 7701SS-6 7701SS-116
7500/7700 SERIES InStItutIonal dooR cloSER
40
HoLDoPENARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Closer Series Assembly
Complete Arm Assembly
Main Arm1
(Length)(mm)(includes 7701-ES)
Secondary Arm(includes 7701-ES)
Main Arm & Rod Assembly
Holder Shoe& Loop Assembly
Adjusting Rod2
(Length)(mm)
7500H/7700H 7701-3/7701-83
7701-1M(11)(279)
7701-113/7700-118(Reg.)/(Par.) 7701-3W
7701-13
7701-31(7-3/8)(187)
J7500H/J7700H 7701-3A 7701-123 7701-3WA 7701-31A(10-13/16)(275)
JL7500H/JL7700H 7701-3B 7701-2M(13-1/2)(343) 7701-133 7701-3WB 7701-31B
(12-7/8)(327)
1. C to C length shown in parentheses.2. C of connecting link to end of rod shown in parentheses.3. Same as 7701-3 but includes #1628H soffit adapter plate.
Note: Mounting hardware included with all parts orders.
7701-13HolderShoe&LoopAssemblyLockNut455
JackScrew1543R
FrictionDisk1554
Soffit AdapterPlate1628H
(includedwith7701-8armassy.)
Secondary Arm Assembly
Screw&WasherAssembly7701-ES
AdjustingRod
MainArm&RodAssembly
MainArm
7701-HSSSet Screw
7701-18HolderShoe&LoopAssemblyincludes7701-13and1628HSoffitAdapterPlate
41
PARALLELRIGIDARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Arm Function Complete Arm Assembly Jack Screw
Non-Holdopen PR7701-5 N/A
HoldopenPR7701-8R(RightHand) 1543R
PR7701-8L(LeftHand) 1543L
Note: Mounting hardware included with all parts orders.
Hold Open Arms Only
JackScrew1543(SeeChart) FrictionDisk
(notvisible)1554
Non-Hold Open Arm Shown
LockNut455
7500/7700 SERIES InStItutIonal dooR cloSER
42
CLoSERPLUS®ARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Note: Mounting hardware included with all parts orders.
CLP-TThumbturn Hold Open
Arm Function Complete Arm Package
Non-Holdopen 6770-5
ThumbturnHoldopen 6870T-8
RampHoldopen 6750R-8
HolePlug*6770P
removable Stop*6770S
HoldopenControl6870T-8Arm only
* These parts and screw pack are included with complete arm assemblies.
Page Revised Electronically 10/13
CLPNon-Hold Open
HolePlug*6770P
removable Stop*6770S
CLP-RRamp Hold Open
Hole Plug*6770P
Removable Stop*6770S
Hold Open Ramp Arm6750R-8Arm Only
43
CLoSERPLUSSPRING™ARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Note: Mounting hardware included with all parts orders.
Non-Hold Open Arm Shown
Arm Function Complete Arm Package
Non-Holdopen CPS6770-5
ThumbturnHoldopen CPS6870T-8
HolePlug*6770P
CPSKit*CPSK6770
*These parts and screw pack are included with complete arm assemblies.
7500/7700 SERIES InStItutIonal dooR cloSER
44
REGULARRIGIDHEAvY-DUTYARM
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Note: Mounting hardware included with all parts orders.
Closer Series Arm Function Complete Arm Package
R7700/R7500
Non-Holdopen
R7701-1Furnishedwithstandardfasteners
7770/7570* 7771-1FurnishedwithTorxfasteners
* Refer to Norton’s Security Closer Catalog.
45
PARALLELRIGIDoFFSETARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Non-Hold Open
Note: Mounting hardware included with all parts orders.
Arm Function Complete Arm Assembly
PRo7701-5 Non-Holdopen
PRo7701-8R Holdopen,RightHand
PRo7701-8L Holdopen,LeftHand
Side View
7500/7700 SERIES InStItutIonal dooR cloSER
46
UNITRoL®ARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Parallel Arm
Note: Mounting hardware included with all parts orders.
Hold Open
MainArm
* Center to center length.
Complete Arm Assembly
Door Width (cm) Main ArmLength* (mm) Non-Hold Open Hold Open
28"-32"(71-81)
9-1/2"(241) 6100-11 6100-1
33"-41"(84-104)
11"(279) 6100-13 6100-3
42"-48"(107-122)
12-1/2"(318) 6100-14 6100-4
Non-Hold Open
MainArm
47
UNITRoL®ARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
Top Jamb
Note: Mounting hardware included with all parts orders.
Non-Hold Open
Hold Open
Complete Arm AssemblyFor Frame Reveals (mm)
Non-Hold Open Hold Open
J6100-4 J6100-7 2-1/8"-3-1/4"(54-83)
J6200-4 J6200-7 1/2"-2"(13-51)
J6400-4 J6400-7 3-3/8"-4-1/4"(86-108)
J6500-41 J6500-71 4-3/8"-5-3/8"(111-137)
J6500-42 J6500-72 5-1/2"-6-3/8"(140-162)
J6500-43 J6500-73 6-1/2"-7-3/8"(165-187)
J6600-4 J6600-7 0"-3/8"(0-10)
7500/7700 SERIES InStItutIonal dooR cloSER
48
LoWPRoFILEARMASSEMBLIES
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Note: Mounting hardware included with all parts orders.
SoffitPlate1618
IncludesScrew&washer Assembly(7780-5armonly)
Screw&WasherAssembly7701-ES
Arm Shoe Assembly7701-AS(PartsShownonPage37)
MainArm&RodAssembly
TubeAssembly
7701-HSHexScrew
Arm Application Complete Arm Assembly Main Arm & Adjusting Rod Assembly Tube & Shoe/Soffit Assembly
regular Arm 7780-1
7780-1MR
7780-1TS(With7701-AS)
ParallelArm 7780-57780-5TS(With1618)
Tri-pack 7780-25
49
TRACKASSEMBLIES7700/7500&STP
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
SpringPlate2
Buffer Spring2
(2Required)RollPin2 (2Required)
end Cap2
7700STEC(2Required)
StationaryBlockAssembly2
CushionBlock2
roller Assembly1, 2
Slide Assembly7700SLD
SlideTrackAssembly(SeeChart)
1 HoldopenTracksonly.2 PartofSlideTrackAssembly.* Consistsoftrack,slider assembly and two end caps. Auxiliarydoorstoprequired.
Arm Stud Clip
7700ASC(Included
when 7700SLD is ordered)
Track Assemblies Part Number
Non-Hold Open Hold Open
Pull-sidemounted 7701ST-1T 7701ST-3T
Push-sidemounted 7701ST-5T 7701ST-8T
Pull-sidemounted(180°) 7701ST-1T180°* N/A
Note: Mounting hardware included with all parts orders
7500/7700 SERIES InStItutIonal dooR cloSER
50
TRACKASSEMBLIES7700/7500&STP
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
Note: Mounting hardware included with all parts orders.
1Includesarmlengthadjustingscrew#7700ALAS2Includesarmtube&adjustingrodassembly
ArmTubeAssembly7701STP-1AT1
DOUBLE EGRESS ARM ASSEMBLy
STANDARD ARM ASSEMBLy
ArmTubeAssembly7701ST-1ATR1 (righthand)
7701ST-1ATL1(lefthand)
7701PT-DE-1R(RightHand)1, 2
7701PT-DE-1L(LeftHand)1, 2
AdjustingRodAssembly
AdjustingRodAssembly
7701ST-1AR1
7701ST-1AT1 7701ST-1AR1
7701STP-1A1,2
retaining ring7700ASr
Arm Stud7700AS
Arm Stud7700AS
AdjustingRodAssembly7701ST-1AR1
retaining ring7700ASr
Arm Stud7700AS
7701ST-1A1,2
STP ARM ASSEMBLy(POCKET DOORS ONLy)
ArmTubeAssembly
retaining ring7700ASr
51
TRACKASSEMBLIES7740/7540ST
Copyright © 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
7500/7700 SERIES InStItutIonal dooR cloSER
AdjustingRodAssembly7740ST-1AR 2ArmTubeAssembly
7701ST-1AT2
ARM ASSEMBLy7740ST-1A1, 2
1Includesarmlengthadjustingscrew.2Includesarmtube&adjustingrodassembly.
*PartofanAssemblyPackNHo=7740SLDHo=7740HSLD
Set Screw*
StopBlock*CushionBlock* Slider Assembly*Channel
DowelPin* HoldopenSpring* Set Screw* Screw*
Note: Mounting hardware included with all parts orders.
Track Assemblies Part Number
Non-Hold Open Hold Open
Pull-sidemounted 7740ST-1T 7740ST-3T
Push-sidemounted 7740ST-5T 7740ST-8T
7500/7700 SERIES InStItutIonal dooR cloSER
contact us at:NortonDoorControls 3000Highway74East Monroe,NC28112 Tel:877-974-2255 Fax:800-338-0965
ABLoY Door Security Solutions Canada 160FourvalleyDrive vaughan,ontario,L4K4T9Canada Tel:800-461-3007 Fax:905-738-2478
Foracompletelistingofproductsandapplications please visit our web site.www.nortondoorcontrols.comwww.assaabloy.ca
Norton®,Unitrol®,Tri-Style®,NorGlide®andCloserPlus®areregisteredtrademarksofYaleSecurityInc.,anASSAABLoYGroupcompany.CloserPlusSpring™isatrademarkofYaleSecurityInc.,anASSAABLoYGroupcompany.otherproducts'brandnamesmaybetrademarksorregisteredtrademarksoftheirrespectiveownersandarementionedforreferencepurposesonly.ThesematerialsareprotectedunderU.S.copyrightlaws.Allcontentscurrentattimeofpublication. Copyright © 2001, 2013, Yale Security inc., an ASSA ABLoY Group company. All rights reserved. reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.
43095-11/13re