*All drawing dimensions approximate and in millimetres and feet and inches. Portafill International

reserves the right to alter the specification of these machine without notice.

PORTAFILL 7000IC TECHNICAL SPECIFICATION

IMPACT CRUSHER

Rotor 4 Blow Bar

Crusher Opening 810 x 600mm (32” x 24”)

Rotor Diameter 800mm (32”)

Rotor Width 750mm (29”)

Crusher Drive Direct Drive from Engine via Belts

Crusher Overload Protection Yes

Dust Suppression Impact Damper

Impact Block

Clamping Wedge

Dust Suppression

Impact Damper Wear Liners Short Blow Bar Long Blow Bar

Rubber Curtain

Chain Curtain

Belt Tension Wheel

Inlet Wear Bar

*All drawing dimensions approximate and in millimetres and feet and inches. Portafill International

reserves the right to alter the specification of these machine without notice.

IMPACT CRUSHER

Crusher Gap Setting Manual

Recommended Maximum Crusher Gap 100mm (4”)

Recommended Minimum Crusher Gap 30mm (1 ¼”)

Further Adjustment Gap can be adjusted depending on material

Maximum Lump Size 400 x 400mm (16” x 16”) depending on material

Blow Bar Weight 140kgs (310lbs)

Rotor Speed 600-700rpm

Wear Liners 15mm (5/8”) thick

Main Crusher Body

Dust Suppression

Inspection Cover

Crusher Hinged Section

Jam Release Mechanism

Crushing Gap Adjustment

Crusher Bearings

Inspection Cover

Crusher Open Close Ram

Inspection Cover

Rubber Curtain

Blow Bar Change Arm

*All drawing dimensions approximate and in millimetres and feet and inches. Portafill International

reserves the right to alter the specification of these machine without notice.

FEEDER

Feeder Length and Width 3868 x 1977mm (12’8” x 6’6”)

Hopper Capacity 1.8m3 (2.3 cu. yd.)

Pre-screening Grid Length and Width 1000 x 700mm (40” x 28”)

Pre-screening Discharge Onto Main Conveyor

Vibration Source Twin Hydraulic Vibrating Units

Vibration Angle Patented design to change angle of throw

Feed to Crusher Control Load Management on Feeder

CONVEYOR

Belt Width 900mm (36”)

Discharge Height 2720mm (8’11”)

Folding Mechanism Hydraulic Folding for Transport

Construction Impact Bed Under Crusher

Belt Type Smooth or Cleated Belt

Hardox Liners

Vibrating Units

Pre-screen Grizzly

*All drawing dimensions approximate and in millimetres and feet and inches. Portafill International

reserves the right to alter the specification of these machine without notice.

POWER

Engine JCB 4 Cylinder Diesel

Emissions Type EU Stage IIIB Tier 4 Interim

Power 120Kw (160HP) @ 2150rpm

Operating Range 1800-2150rpm

Cooling Type Water Cooled

Typical Fuel Consumption 12-14 litres per hour (3 US Gallons per hour)

Fuel Tank Capacity 200 litres (52 US gallon)

Air Filter Scavenger Air Filter

OPTIONAL EXTRAS

• Closed loop recirculating screen and conveyor (Patent folding action)

• Dust suppression

• Dust covers on conveyors

• Radio tracking remote

• Belt magnet on main conveyor

• Digital belt scales

7000IC-R SPECIFICATIONS

Screen Size Length x Width 3180 x 1125mm (10’ 5” x 3’ 8”)

Number of Decks Single

Fines Conveyor Belt Width 900mm (36”)

Fines Conveyor Discharge Height 2500mm (8’2”)

Transfer Conveyor Belt Width 600mm (24”)

Returns Conveyor Belt Width 500mm (20”)

Folding Mechanism Hydraulic Folding for Transport

Remove for Transport No

WEIGHT

• 7000IC 19,000kgs (41,880lbs)

• 7000IC-R 24,000kgs (52,900lbs)

*All drawing dimensions approximate and in millimetres and feet and inches. Portafill International

reserves the right to alter the specification of these machine without notice.

Working Dimensions 7000IC

Transport Dimensions 7000IC

2900

(9’6”)

12000 (39’3”)

2510

(8’2”)

2539

(8’3”)

2270 (7’5”)

9438 (31’)

2539

(8’3”)

*All drawing dimensions approximate and in millimetres and feet and inches. Portafill International

reserves the right to alter the specification of these machine without notice.

Working Dimension 7000IC-R (Closed Circuit)

Working Dimension 7000IC-R (Open Circuit)

2500

(8’2”)

3760

(12’4”)

13957 (45’8”)

5280

(17’3”)

13957 (45’8”)

3277

(10’7”)

*All drawing dimensions approximate and in millimetres and feet and inches. Portafill International

reserves the right to alter the specification of these machine without notice.

Transport Dimension 7000IC-R (40ft HC Container)

ISO Image 7000IC-R

11886 (38’11”)

2330 (7’6”)

2566

(8’4”)

2566

(8’4”)