SWIMMING POOLFITTINGS

With 40 years experience, M&G Olympic Products has maintained its position as a leading specialist in the design,

manufacture and installation of custom built architectural metalwork including:

Staircases, Balustrades & Handrails

Catering & Purpose-made Fabrications

Sanitary & Hospital Equipment

Swimming Pool Equipment

All products are manufactured at our two-factory site in the centre of Sheffield which is constantly enhanced with

investment in the latest state-of-the-art design and production equipment. We address quality at all stages with

frequent monitoring to guarantee that we provide our customers with high quality products that will not be found

wanting.

Our design team are happy to work with customers during the early stages of a project to undertake site surveys

and produce design solutions to any stair and canopy requirement. Over the years, M & G Olympic Products has

built up an excellent working relationship with other manufacturers of architectural products to provide customers

with complete turnkey solutions.

This brochure explains our core competences in the manufacture of Racco swimming pool equipment. It shows

examples of our work and how we always work to exceed our customers expectations.

For further details on these or any other products in our portfolio, please contact our sales office on

0114 275 6009, or log onto our website: www.mgolympic.co.uk.

Introduct ion

1

Design solutions to any specification. State-of-the-art production technology. One of our projects.

2

Balustrading & Galler ies

Triple rail barrier to spectator steps and disabled spectatorbalustrading complete with toughened glass infill panels.

Swimming Pool spectator balustrading manufactured from 316 grade stainlesssteel complete with toughened glass infill panels.

Gymnasium spectator balustrading manufactured from mild steel with apolyester powder coated finish complete with toughened glass infill panels.

One of our projects. Curved stainless steel balustrading to viewing gallery complete with toughened glass infill panels.

Right Swimming pool spectator balustrading and barrier rails.

M & G Olympic balustrading will complete any leisurefacility. All balustrading is designed, fabricated andinstalled to conform to crowd control buildingregulations

Balustrading can be manufactured in stainless steel orcoated mild steel, infills can be toughened glass,perforated sheet or rod infill, all to comply with healthand safety requirements.

Page 2 : The architectural metalwork for this flume tower at Burgess HillLeisure Centre was all designed, manufactured and installed by M & GOlympic Products. It comprises structural steelwork to tower (hidden bycladding), landing support steelwork, staircase, stainless steel balustrading,clear toughened glass infill panels and hardwood timber treads and decking.

3

4

Leisure Centres

Stainless steel balustrading complete with toughened glass panels. Stainless steel twin rail barriers and spa pool access ladders.

Mild steel bridge, stainless steel balustrading complete with toughened glass and stainless rod infills. Designed by M & G Olympic Products Design & Development Department.

Mild steel bridge, stainless steel toughenedglass infill balustrading.

Stainless Steel is the ideal material for swimming pool areas asit is of superior corrosion resistance and easy to maintain in theparticularly humid atmosphere of swimming pools and leisurecentres. Manufactured in 316 grade stainless steel for extracorrosion resistance, all products are designed to withstand thelarge amount of use in public and commercial swimming pools.

M & G Olympic products are a major supplier of standard andspecially designed swimming pool equipment for new andrefurbished products, including hydrotherapy pools.

5

Custom Buil t Fabricat ions

Special architectural grab rails. Stainless steel gate with vertical rod infills. Special spa pool step and grab rails

In addition to its standard products,M & G Products design andmanufacture bespoke fabricationsincluding barrier rails, guard rails,ladders and other fittings.

Twin rail barrier rail complete with pool instruction rail. Architectural grab rails.

6

Underwater Windows

Manufactured from stainless steel andtoughened glass M & G Olympicsunderwater windows are supplied as acomplete sealed unit. The thickness ofthe glass depends upon the depth ofthe water.

Windows can be square, rectangularor round and can be designed andmanufactured to suit individualrequirements.

Round underwater window 1 metre in diameter.

7

Diving Plat forms

3m Diving Platform in 316 stainlesssteel, complete with mirror polishedhandrails, specially designed to suitcustomer requirements. R500Numbered Starting blocks and 1mOlympic- standard divingspringboard (just visible)

Barr ier Rai ls

R.105Double Rail BarriersStraight 38mm diameter mirror polished stainless steeltube 16G wall thickness. Lengths made to order withuprights R.107 at approximately 1000mm centres(all welded construction).Please advise method of fixing required.

R.106Double Rail BarriersAs R.105 but 50mm diameter uprights R.108.N.B. Tube size of the barrier is dependent on the structuralloading required.

R.115Double Rail BarriersSloping 38mm diameter mirror polished stainless steeltube 16G wall thickness. Lengths made to order withuprights approximately 1000mm centres (all weldedconstruction).Please advise dimensions A, B, C and D and method of fixing required.

R.118Double Rail BarriersAs R.115 but 50mm diameter tube.N.B. Tube size of the barrier is dependent on the structuralloading required.

R.100Single Rail BarriersStraight 38mm diameter mirror polished stainless steeltube 16G wall thickness. Lengths made to order withuprights R102 at approximately 1000mm centres (allwelded construction).Please advise method of fixing required.

R.101Single Rail BarriersAs R.100 but 50mm diameter tube uprights R.103.N.B. Tube size of the barrier is dependent on the structuralloading required.

R.110Single Rail BarriersSloping 38mm diameter mirror polished stainless steeltube 16G wall thickness. Lengths made to order withuprights approximately 1000mm centres (all weldedconstruction).Please advise dimensions A, B, C, and D and method of fixing required.

R.113Single Rail BarriersAs R.110 but 50mm diameter tube.N.B. Tube size of the barrier is dependent on the structuralloading required.

8

R.80Barrier Gate Set38mm diameter mirror polishedstainless steel gate, hinge post withnylon bearings for smooth operation,stop post to take alternative locks orbolts. (Posts may be continued intobarrier rails).

R.81Barrier Gate SetAs R.80 but 50mm diameter tube.

R.60Free Standing Post48mm diameter stainless steel postwith ring fitting at the top to take ropefrom any direction. Weighed base toallow post to be easily moved.

R.61Barrier Rope1, 1.5 and 2 metre lengths. Blackplastic end hooks moulded on.

R.75Trombone EndOn double rail barriers only (straightor sloping) useful where removablesections need to be positionedtogether or when end has to be tightlypositioned by a wall, 38mm diametertube.

R.76Trombone EndAs R.75 but 50mm diameter tube.

Infill PanelsVarious designs and types:-Rigidised or other patterned material.Perforated- Plastic coated, Lexanplastic, Stainless Steel tube, Glasspanels on clips.

Barrier rails can be specially designed andmanufactured to suit individual requirements.See page 6 for examples of recently completedprojects.

Barr ier Rai ls

9

Hand-Guard Rails

R.20Capped EndWelded disc, ground and polished toeffect solid end.

R.119Wall BracketBent stem welded to straight collarto suit 32mm diameter 38mmdiameter or 50mm diameter tube.Other end welded to backplatewhich is drilled three holes for fixingas required.

R.120Wall BracketBent stem welded to raking collar tosuit 32mm diameter 38mm diameteror 50mm diameter tube. Other endwelded to backplate which is drilledthree holes for fixing as required.

R.121Wall BracketsBent stem welded to straighthandrail tube and backplate whichis drilled three holes for fixing asrequired.

R.122Wall BracketsBent stem welded to raking handrailtube and backplate which is drilledthree holes for fixings as required.

10

Pool layout

Competition PoolPosition of equipment:

R.705/R.710 Starting Blocks(see page 17.)

R.725 Water Polo Goals standard for 25metre pools both ends wall mounted(see page 18).

R.726 Water Polo Goal. For pools longerthan 30 metres shallow end floating(see page 18).

R.775/R.776 Racing Line(Fixings see page 23).

R785 Backstroke Warning(see page 20).

R.786 False Start(see page 20).

For all equipment to be fixed around thepool edge please indicate type of system,measurements of water depth, position ofdeck channels etc., slope of finishes etc.

11

Ladders

12

Access Ladder StandardTo BS EN 134512: 2001Stainless steel mirror polished tubular side members 38mm or 50mmdiameter and 16G wall thickness with asymmetric handle bends (N.B. splayingout to the pool surround is preferred) with threaded studs and stainless steelanti-slip treads. (Removable type has plastic end caps for resting against poolwalls, plus pinch sockets and escutchions for grouting into pool walkway).Available in two to six tread versions to suit depth A and manufactured toBritish and European standards BS EN 134512: 2001.

Dimen