6922-520-XZ-DS-6012_REV A
-
Upload
poochipandy -
Category
Documents
-
view
217 -
download
0
Transcript of 6922-520-XZ-DS-6012_REV A
7/28/2019 6922-520-XZ-DS-6012_REV A
http://slidepdf.com/reader/full/6922-520-xz-ds-6012rev-a 1/2
Project GGSRP Location BathindaClient M/s HMEL Unit SRU BLOCK
A Site cond it ions
1 Maximum ambient temperature: °C 4 Relative humidity: %2 Minimum ambient temperature: °C 5 Altitude above MSL:3 Design ambient temperature: °C 6 Environment:B Technical particulars1 Operating conditions 6.6kV ±6%, 50Hz ±3% Duty cycle2 Switchboard ratings/details * Rating *3 Auxiliary supply 5 Type of relays Numerical
AC 6 Interface with ECSDC 220V ±10% DC 7 Bolted, removable gland plate
4 Circuit breaker 8 Painting Type 9
Note Al l unf il led data shall be f il led in by cont rac tor/ v endor .
* Vendor shall decide & fill.
A Switchboards 10 Max. size/no. of cables that1 Tag no. can be terminated2 Make with rear extension3 T e desi nation without rear extension
PURCHASER'S DATA
DATA SHEET HV SWITCHBOARD
Datasheet No.6922-520-XZ-DS-6012
Rev : APage 1 of 2
46.1 85
MANUFACTURER'S DATA
145
<1000 mHumid & corrosive
240 V ±10% SPN
Vacuum
0-3 min-co-3 min-co
Re uiredRe uiredEpoxy & shade 631
Format No: EIL 1650-3001A Rev.2 Copyrights EIL - All rights reserved
4 Degree of protection 11 Size of rear extension panel5 CB panel 12 Clearance in air
Max. overall weight Phase to PhaseOverall dimensions Phase to Earth
Width 13 Bus bar current rating atDepth design ambient temp.Height 14 Horizontal main bus bar size
6 Dummy/Adaptor panel (No. of flats * size of each flat)Overall dimensions Material
Width 15 Vertical dropper sizeDepth MaterialHeight 16 Earth bus bar size
7 Largest shipping section MaterialMax. overall weight 17 Power frequency withstandOverall dimensions 18 Impulse withstand voltage
Width 19 Short circuitDepth 1 secondHeight Peak dynamic
ISSUED FOR BIDS MHR PB PBRev. No Date Purpose Prepared by Checked by Approved by
A 26.05.2008
<1000 mHumid & corrosive
240 V ±10% SPN
Vacuum
0-3 min-co-3 min-co
Re uiredRe uiredEpoxy & shade 631
Format No: EIL 1650-3001A Rev.2 Copyrights EIL - All rights reserved
7/28/2019 6922-520-XZ-DS-6012_REV A
http://slidepdf.com/reader/full/6922-520-xz-ds-6012rev-a 2/2
8 Recommended clearances 20Front 21Rear 22Above 23
9 Shock loading on foundation 24Note
1 Vendor shall furnish dimensions of various switchboards, CB panels and dummy/adaptor panels separately.2 Vendor shall furnish technical particulars of various switchboards separately.3 Switchboard offered shall be of proven design and shall have been successfully type tested. Type test
certificates for an exactly identical design of offered switchboard shall be furnished by bidders. These testreports sh all be not mo re than 5 yeas old, as on the final bid o pening d ate. In case these type tests have notbeen conducted during the last 5 years, bidder shall conduct these type tests on the offered design of switchboard before despatch without any extra cost and delivery impact.
B Circuit breaker 13 Total opening time1 Type designation 14 Total closing time
2 Make 15 Power requirement3 Mounting Opening4 No. of poles/phases Closing5 Current rating (in air) Spring charge motor6 Current rating (inside panel 16 Time for spring charging
at design temperature) 17 VCB interrupter make
MANUFACTURER'S DATA
DATA SHEET HV SWITCHBOARD
Datasheet No.6922-520-XZ-DS-6012
Rev : APage 2 of 2
Format No: EIL 1650-3001A Rev.2 Copyrights EIL - All rights reserved
7 Short time rating (1 sec 18 6 as re ng arrangemen8 Sym breaking capacity 19 Surge suppressor
% DC component Type designation9 Peak making capacity Make
10 Power frequency withstand 20 Derating-capacitor switching11 Impulse withstand voltage 21 Earthing system12 Duty cycle 22
Note1 Vendor shall furnish technical particulars of various circuit breakers separately.
Format No: EIL 1650-3001A Rev.2 Copyrights EIL - All rights reserved