672&. 02725 &$7$/2* - OmniDriveomnidrive.ca/PDFs/OmniDrive-OD513.pdf · 2014. 5. 20. · 1 2 3 4 5...
Transcript of 672&. 02725 &$7$/2* - OmniDriveomnidrive.ca/PDFs/OmniDrive-OD513.pdf · 2014. 5. 20. · 1 2 3 4 5...
STOCK MOTOR CATALOG
WHAT’S NEW INSIDE
A COMPLETE LISTING OF NEW MODELS IS AVAILABLE IN THE INDEX (PAGE 65 - 69)INDICATED BY SYMBOL “‡”
BROAN, GREENHECK, LOREN COOK, PENN VENTILATOR TJERNLUND, VENMAR, VANEE & MORE..
NEW OEM REPLACEMENT MOTORS
STAINLESS STEEL MOTORS
RIGHT ANGLE WORM GEAR REDUCERS
ALUMINUM FRAME TEFC MOTORS
56, 56C & 56J THREE PHASE - REMOVABLE FEET F-1, F-2 & F-0 MOUNTING - INVERTER DUTY 56 & 56H (5/8” SHAFT) - 56HZ (7/8” SHAFT)
1/3 TO 10 HP - 3600, 1800, 1200 RPM - 56C TO 215TC TEFC & TENV ENCLOSURES - RIGID BASE
56C INPUT FLANGE - ALUMINUM ALLOY HOUSING HOLLOW, SINGLE OR DOUBLE OUTPUT SHAFT
1
234
5
6
78910111213
14
1516
17 - 39
PAGE
www.omnidrive.ca
TABLE OF CONTENTS
‘C’ Frame Skeleton Motors....................................................................................................................
Cross�ow & Centrifugal Blowers.........................................................................................................Blower Reference Dimension Chart..................................................................................................Axial Fans & Accessories + Inline Centrifugal Fans.......................................................................
Unit Bearing Fan Motors........................................................................................................................
ECM Evaporator Fan Motors & ECM Unit Bearing Style Motors..............................................
3.3” Diameter Hubless Fan Motors.....................................................................................................3.3” Diameter Draft Inducer Motors..................................................................................................3.3” Diameter Refrigeration Motors...................................................................................................3.3” Diameter Open Construction (115V)........................................................................................3.3” Diameter Open Construction (230V + Double Shaft).........................................................3.3” Diameter Totally Enclosed Construction (115V)...................................................................3.3” Diameter Totally Enclosed Construction (230V + Double Shaft)....................................
4.1” Diameter Open & Totally Enclosed Construction.................................................................
5” Diameter Open Construction..........................................................................................................5” Diameter Totally Enclosed Construction.....................................................................................
OEM Replacement Motors....................................................................................................................
48 Frame - Single Phase Belt Drive Motors..................................................................................... 48 Frame - 575 Volt Direct Drive Blower Motors........................................................................... 48 Frame - Flex Mount & Direct Drive Blower Motors ................................................................ 48 Frame - Condenser Fan Motors..................................................................................................... 48 Frame - Unit Heater & Exhaust Fan Motors............................................................................... 48 Frame - Pedestal Fan Air Circulator Motors..............................................................................
General Purpose - Single Phase Motors - Rolled Steel TEFC..................................................... General Purpose - Single Phase Motors - Rolled Steel ODP & TEFC.......................................
56 Frame - Three Phase Motors - Rolled Steel ODP...................................................................... NEMA Premium - Three Phase Motors - Rolled Steel ODP.........................................................
56 & 56HZ Frame - Three Phase Motors - Aluminum Frame TEFC.......................................... 56C & 56 HCZ Frame - Three Phase Motors - Aluminum Frame TEFC................................... 56 Frame - Three Phase Motors - Rolled Steel TEFC..................................................................... NEMA Premium - Three Phase Motors - Rolled Steel TEFC........................................................ NEMA Premium - Three Phase Motors - Cast Iron TEFC..............................................................
Circulator Pump Motors - Single Phase Motors - ODP................................................................ Jet Pump Motors - Three Phase Motors - Aluminum Frame TEFC.......................................... Close Coupled Pump Motors - Three Phase Motors - Rolled Steel ODP & TEFC................
Permanent Magnet DC Motors...........................................................................................................
Stainless Steel Motors - Three Phase Motors - TEFC & TENV.....................................................
Worm Gear - Right Angle Speed Reducers.....................................................................................
NEMA Transition Motor Bases.............................................................................................................. NEMA Adjustable Motor Bases - Single Adjusting Bolt.............................................................. NEMA Adjustable Motor Bases - Double Adjusting Bolt............................................................
Index - Stock Number to Page.........................................................................................................
404142434444
4546
4748
49 - 5051 - 52535455
56
59
60
61
65 - 69
5758
626364
Heating, Refrigeration & Ventilation Motors
• All Angle Mount• Continuous Duty, Air Over• Class ‘B’ Insulation• UL Listed & CSA Approved• Mechanically Reversible• Shaded Pole• Impedance or Thermally Protected• One & Two Speed• 60 Hz.• Sleeve Bearings
SS3100 SS3670
SS3101 Stock # Stack Amps. RPM Rotation Shaft Comments
Features:
(●) Ball Bearing(*) Permanent Split Capacitor Design01
‘C’ Frame - Skeleton Motors
Volts
SS603 5/8” 0.63 2400 CCWSE 7/32” x 2-1/8”SS604 5/8” 0.78 2700 CCWSE
SS605 5/8” 1.00 2800 CCWSE
“C” Groove on Shaft, 10” Cord & Plug
Round Shaft 9” Cord & Plug3/16” x 1-3/16”
3/16” x 1-3/4”SS610 7/8” 1.20 / 0.75 2400 / 2 CCWSE 7/32” x 1-3/16”
30” Leads
“C” Groove on Shaft - 2 Speed
120120
120120
“C” Groove on Shaft, 8” Cord & Plug“C” Groove on Shaft, 6” Cord & Plug
SS611 1/2” 0.60 1500 CCWSE 3/16” x 1-5/8”SS630 1/2” 0.75 3000 CCWSE 7/32” x 1-13/16”
120120
SS3101 7/8” 0.70 3000 / 2 CWSE 7/32” x 1-15/16” “C” Groove on Shaft - 2 Speed120SS635 1-1/2” 1.20 / 0.83 1550 CCWSE 1/4” x 1-1/2” 12” Leads with Terminals208 - 240
SS601 3/4” 0.75 3000 CCWSE 1/4” x 2-5/16”Breakaway Shaft 15” Cord & Plug
Includes 1/4” to 5/16” Bushing, 6” Cord & Plug
SS3103 3/4” 0.81 3000 CCWSE 7/32” x 2-7/16”120120
SS3670 5/8” 0.40 / 0.26 3000 CWSE 3/16” x 1-9/16” Fan Kit and Mounting Accessories120 / 240Includes Paddle Fan Blade2 “C” Groove on Shaft 10” Cord & PlugSS613 5/8” 0.56 1600 CCWSE 7/32” x 2-7/16”
SS3100 5/8” 0.59 3000 CCWSE 7/32” x 1-11/16”120115
SS601 - SS603 - SS613 SS605
SS617 3/8” 0.22 1900 CWSE “C” Groove on Shaft, 12” Leads w/ Terminals3/16” x 1-1/4”208-240
SS617 - SS630 - SS3103 SS604 - SS611
SS610 SS635
www.omnidrive.ca
02
Refrigeration, Food Service, Gas/Wood Burning Stoves and Fireplaces
General Purpose & OEM Replacement
Stock # CFM HP Amps. RPM A B
UB5 50 1/125 0.40 1550 6-3/8”UB3 100 1/50 0.80 3000 6-1/2”
32” Leads - T.E. Motor
3 Speed Switch w/ Cord & Plug, 8” Heat Sensor Leads
Comments
UB4 ● 100 1/40 0.88 3000 6-1/4”
2 Speed - Conduit Box - Heat Sink
UB33 100 1/50 0.88 3200 6-7/8”
UFB500 140 1/30 1.10 2860 6-1/2”
17” Leads - T.E. Motor
UB160 160 1/33 1.10 1550 8-1/4”UB168 168 ---- 1.00 3000 4-1/8”
Conduit BoxLeads - No Conduit Box
UB1 200 1/30 1.20 2700 6-1/8”UB200T-2 200 1/100 0.60 1600 ----
Conduit BoxUB265 265 1/25 1.40 1550 8-1/2”
6’ Cord & Plug - Variable Speed
UB465 465 1/15 2.60 1550 8-1/2”
6’ Cord & Plug
24” Cord & Plug
6’ Cord & Plug
5-3/4”6-7/8”5-1/2”6-7/8”
6-1/2”8-1/8”4.00”5-1/2”----9-1/4”9-1/4”
E
3-3/4”3-3/8”3-1/2”3-3/4”
3-1/8”4-1/4”3-1/4”3-1/4”----4-1/4”5-5/8”
UB579 1/35 1.20 3000UFB189 100 1/50 1.10 3000 7.10”
7.13” 7.67” 4.70”7.61” 4.81”
Radiant Tube Heater
Hot Water Heater
100
Features:
Crossflow & Centrifugal Blowers
(●) Ball Bearing(*) Permanent Split Capacitor Design
• All Angle Mount• Continuous Duty, Air Over• Class ‘B’ Insulation• UL Listed & CSA Approved• Shaded Pole• Thermally Protected• Single, Two & Three Speed Models• Variable Speed Model• 60 Hz.• Sleeve Bearings• 115 Volts
UB200T-2
UB160UFB500
UB1 UB265
UB465
UB168
UFB189 UB579
UB3 UB33UB5 UB4
www.omnidrive.ca
D
CF
HL
J
Stock # CFM Figure C D F H
UB5 50 5 4-3/4” 2-1/4” 3-3/8”UB3 100 5 5-1/2” 2-5/16” 3-3/8”UB4 ● 100 4 6-3/8” 2-1/4” 3-3/8”UB33 100 5 6-3/4” 2-1/4” 3-3/8”
UFB500 140 3 6.00” 2-1/2” 3-3/8”UB160 160 3 6-3/4” 3-1/2” 3-3/8”UB168 168 2 12-1/4” 4-5/8” 3-3/8”UB1 200 6 8-1/2” 2-3/4” 3-3/8”UB200T-2 200 7 11-1/2” 4-1/4” 9-1/2”UB265 265 3 7.00” 1-1/4” 3-3/8”UB465 465 1 10-1/2” 8.00” 3-3/8”
----------------
2-1/2”3-1/4”4-1/2”----
10-1/4”4.00”7-7/8”
L
1-7/8”2-1/4”----2-1/4”
4.00”4-1/8”1-5/8”2-1/4”15.00”4-3/4”8-3/4”
UB579 3 5 3/8” 1.70”UFB189 100 3 5-3/4” 1-3/4” 3-3/8”
3-3/8” 1.78” 3.01”1.65” ----
100
Figure 1
Figure 2
Figure 3
Figure 4Figure 5
Figure 6
Figure 7
J K M W
2-3/4” 3-1/2” 2-1/2”3.00” 3.00” 2-1/4”---- ---- ----
3.00” 3.00” 2-1/4”
5-1/8” 4.00” 1-1/2”4-3/4” 4-3/4” 1-1/2”2-5/8” ---- 3-5/8”3.00” 3.00” 2-1/4”3-3/8” ---- ----5-1/2” 5.00” 4-1/4”9-1/2” 5.00” 4-3/8”
2.00”2.00”2-1/8”2.00”
2-1/2”3-1/4”1.00”2.00”----3-1/2”3-5/8”
4-1/2” 5-1/8”2-3/4” 3.76” 1.00”
3.01” 2.46”2.57”
(●) Ball Bearing(*) Permanent Split Capacitor Design03
Blower Reference Dimension ChartCrossflow & Centrifugal Blowers
www.omnidrive.ca
04
Stock #
• Installs In Any Position• High Pressure & Volume• Supplied With 8 Foot Cord & Plug• Mounting Bracket Included• Backwards Inclined Fan Blades• Steel Housing, Baked Powder Coat Finish• Permanently Sealed Ball Bearings
Features:
Inline Centrifugal Fans
(●) Ball Bearing(*) Permanent Split Capacitor Design
Ventilation, Exhaust, In-line Boosting, Dryer Vent Boosting and Hydroponics
Axial Fans & Accessories
Three Year Warranty
VENT-100 ● 4 INCH 175 98 120 0.97 60 0.90VENT-150 ● 6 INCH 435 130 120 0.97 60 1.00VENT-200 ● 8 INCH 745 210 120 1.76 60 1.90VENT-250 ● 10 INCH 785 230 120 2.00 60 1.90VENT-315 ● 12 INCH 1075 295 120 2.50 60 2.60
Duct Diameter CFM Watts Volts Amps. Hz. dBA
Stock #
BF51 100 21/19 115 0.40/0.28 4-11/16” x 4-11/16” x 1.50” 50/60 4WT42, RF205BF61 ● 240 30/29 115 0.28/0.25 6-3/4” x 6-1/8” x 2.00” 50/60 4C720, 4WT42, RF240BF101 ● 560 36 115 0.35 10” x 10” x 3.50” 50/60 4C688, 4WT44, RF250BF52 100 25/19 230 0.20/0.14 4-11/16” x 4-11/16” x 1.50” 50/60 4WT33, RF215BF62 ● 240 29/28 230 0.13/0.12 6-3/4” x 6-1/8” x 2.00” 50/60 4WT43, RF245
CFM Watts Volts Amps. Dimensions Hz Replaces
BF102 ● 560 36 230 0.19 10” x 10” x 3.50” 50/60 4C829, 4WT45, RF255
BFC24 Axial Fan Lead Assembly 24 InchesBFC36 Axial Fan Lead Assembly 36 InchesFG5 Fan Guard for 4-11/16” (BF51 & BF52)FG6 Fan Guard for 6-3/4” (BF61 & BF62)FG10 Fan Guard for 10” (BF101 & BF102)
BF61 - BF62 BF101 - BF102 BF51 - BF52 BFC24 - BFC36 FG5 - FG6 - FG10
Stock # Description
Includes 24” Lead Assembly
www.omnidrive.ca
(●) Ball Bearing(*) Permanent Split Capacitor Design05
• Totally Enclosed Construction• Cast Iron Construction• Continuous Duty, Air Over• Shaded Pole Design• All Models Include; Vibration Dampening Hub Washer, Speed Nut & 4 Mounting Screws• 115 & 230 Volt• UL & CSA Recognized• Horizontal & Shaft Up Mounting Only
Features:
All Models
Cast Iron - Two Mounting FeetUnit Bearing Fan Motors
Stock # Watts RPM Volts Amps. Rotation
SS5211 4 1550 115 0.29 CWLE 2.39”SS5212 4 1550 115 0.29 CCWLE 2.39”SS5221 4 1550 230 0.15 CWLE 2.39”SS5222 4 1550 230 0.15 CCWLE 2.39”SS5311 6 1550 115 0.40 CWLE 2.93”
33333
SS5312 6 1550 115 0.40 CCWLE 2.93”SS5411 9 1550 115 0.55 CWLE 2.93”SS5412 9 1550 115 0.55 CCWLE 2.93”SS5421 9 1550 230 0.27 CWLE 2.93”
3333
“A” Rear Mounting Holes
9 1550 230 0.27 CCWLE 2.93” 3
SS5109 2 1550 115 0.25 CWLE 2.39” 3
SS5422SS5811 16 1550 115 1.00 CWLE 3.19” 3SS5812 16 1550 115 1.00 CCWLE 3.19”SS5821 16 1550 230 0.50 CWLE 3.19”SS5822 16 1550 230 0.50 CCWLE 3.19”
333
www.omnidrive.ca
• Up to 70% Efficiency• Cost Effectiveness, Competitively Priced for Low Initial Investment• Energy & Cost Saving, Payback In less than One Year• CO² Reduction, Eco-Friendly Technology• ECR Motors are Ideal for Retrofit & New Installations• Clockwise Shaft End Rotation, 19” Sleeved Leads with 2 Pin Plug• Standard 5/16” Shaft Diameter, 2-1/2” Length with 1-3/4” Flat• Moisture & Humidity Resistant, IP42 Enclosure Rating• Operating Temperature Range of -30°C to +40°C (-22°F to 104°F)• Input Voltage Range for ECR501 Motor is 100V…127V; ECR502 Motor is 190V…254V• Drop In Replacement for Traditional Shaded Pole & P.S.C. Evaporator Fan Motors• Reduce Inventories; One Motor Replaces 1/20HP (35W) & 1/15HP (50W) 1550 RPM Evaporator Motor Designs• Flexible Mounting with Four Extended 8-32 UNC Threaded Thru-Bolts on 2.84” B.C.D. at Both Ends• Fully Enclosed, Long Life Ball Bearings• Automatic Thermal Overload/Electronic Protection
Features:
Stock # Enclosure Amps. “A” Industry Reference
06
Commercial Refrigeration ApplicationsECM Evaporator Fan Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design
Watts
• Up to 70% Efficiency• Cost Effectiveness, Competitively Priced for Low Initial Investment• Reduce Inventories, One Motor Covers 4W through 16W Applications• Energy & Cost Saving, Payback In less than One Year• CO² Reduction, Eco-Friendly Technology• Drop In Replacement for Traditional Shaded Pole Unit Bearing Motors• ECR Motors are Ideal for Retrofit & New Installations• Clockwise Opposite Shaft End Rotation, 19” Sleeved Leads With 2 Pin Plug• Rear Mounting with Three Standard 8-32 UNC Threaded Holes• Foot Mounting with 4 Threaded 8-32 UNC Holes• Universal Hubless Shaft Accommodates Standard Axial Fan Blades• Moisture & Humidity Resistant• Input Voltage Range for ECR161 Motor Is 90V…140V• Operating Temperature Range of -10°C to +40°C (14°F to 104°F)• Mounting Shroud & Fan Guard Mounting with Four Extended M4 Threaded Thru-Bolts on Motor Shaft Side• Fully Enclosed, Long Life Ball Bearings• Automatic Thermal Overload/Electronic Protection
Features:
ECR501 - ECR502
ECR161
Energy Efficient Electronically Commutated Brushless DC Motors
Commercial Refrigeration ApplicationsECM Unit Bearing Style Motors
Energy Efficient Electronically Commutated Brushless DC Motors
ECR501 ● 50 1.30 3.58” 5/16” x 2-1/2” R358, R1052, R90572, D1124, 1043336
5101, 5103, E1058, E1052
ECR502 ● 50 0.60 3.58” 5/16” x 2-1/2” R359, R1053, R90573, D1126, 10437665201, 5203, E1059, E1053
TEAO
RotationShaft
CWSE
CWSE
TEAO
RPM
1550
1550
Volts
115
208-240
Stock # Enclosure Amps. “A” Industry ReferenceWatts
RotationShaftRPMVolts
ECR161 ● 4...16 0.34 2.50” Hubless 5211, 5311, 5411, 5611, 5811, 5213, 5313, 5413, 5813
CWOSETEAO 1800120
www.omnidrive.ca
• Threaded Shaft (5/16”) With Speed Nut• Continuous Duty• Class ‘B’ Insulation• UL Listed & CSA Approved• Shaded Pole• Thermally Protected• 60 Hz• Totally Enclosed Construction• Sleeve Bearings
Stock # HP Amps. RPM Rotation Comments Replaces
Features:
(●) Ball Bearing(*) Permanent Split Capacitor Design07
SS101 - SS103 - SS122 - SS137
SS108 - SS123SS119 - SS120 - SS133
SS101L - SS103L
SS250
SS127
SS133 1/30 1.10 CWSE2.59”
SS101 1/45 0.90 CCWSE2.40”
SS101L 1/45 0.90 CCWSE2.34”
SS103 1/45 0.90 CWSE2.34”
SS103L 1/45 0.90 CWSE2.34”
2 Speed
Lyall Cord & Plug / 2 or 3 Bolt Mounting
Lyall Cord & Plug / “L” Mounting Bracket
Lyall Cord & Plug / 2 or 3 Bolt Mounting
Lyall Cord & Plug / “L” Mounting Bracket
Markhot
Foster / Hussmann
Foster / Hussmann
Foster / Hussmann
Foster / Hussmann
SS137 1/70 0.59 CCWSE2.19”
SS119 1/70 0.70 CWSE2.25”
SS120 1/70 0.62 CCWSE2.25”
SS123 1/70 0.60 CCWSE2.59”
3 Prong Lyall Cord & Plug / 2 or 3 Bolt Mounting
2 or 3 Bolt Mounting
2 or 3 Bolt Mounting
Double “U” Bracket
Coldstream
Foster
Foster
Ideal
1/70 0.65 CWSE3.71” 3 Bolt Mounting Shaft End / 2 Speed Switch with Cord & Plug Wood Stove
SS127 1/75 0.78 CWSE2.00”
SS108 1/100 0.60 CWSE2.00”
2 Bolt Mounting Shaft End / Hex Hub Shaft End
“U” Bracket
Foster
Hunter / Ideal / Lear
SS250
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
1600
1550
“A”
SS124 ● 1/20 1.55 CWSE2.80” Lyall Cord & Plug / 4 Bolt Mounting Foster / Dunham Bush / Hussmann1550
Volts
115
115
115
115
115
115
115
115
115
115
120
115
115
SS125 ● 1/20 0.80 CWSE2.80” Lyall Cord & Plug / 4 Bolt Mounting Foster / Hunter / Dunham Bush1550230
SS122 1/60 0.35 CCWSE2.47” Lyall Cord & Plug / 2 or 3 Bolt Mounting Coldstream / Foster1550230
SS124 - SS125
3.3” DiameterHubless Fan Design
Commercial Refrigeration, Condensers, Unit Coolers & Display Cases
www.omnidrive.ca
08
Draft Inducer Motors
• Continuous Duty• Class ‘B’ Insulation• UL Listed & CSA Approved• Thermally Protected• 60 Hz• Ball Bearings
Features:
3.3” Diameter
(●) Ball Bearing(*) Permanent Split Capacitor Design
Stock # HP RPMVolts Amps. Rotation“A” Comments ReplacesShaft
UFM3714 ●* 1/8 115/230 1.6 / 0.8 1/4" x 4.00”6.98”
UFM410 ●* 1/10 115/230 1.4 / 0.7 1/4" x 3.70”6.98”
UFM78 ●* 1/10 115/230 1.3 / 0.7 5/16” x 3.25”4-1/8”
Conduit Box 1/4" to 5/16” Bushing Conduit Box - 3 Mounting LugsStainless Shaft 1/4" to 5/16” Bushing
4 Mounting Studs on each end - No Switch
Carrier / Gen. Replacement
Reznor / Fasco
Reznor / 43846 & 43424
REV.
REV.
REV.
1/10 115 1.60 5/16" x 3.20”4.10”
148053 ●* 1/20 115 0.70 5/16” x 3.00”4.54”
148055 1/33 115 1.00 5/16" x 2.00”3.26”
No Conduit Box
4 Mounting Studs
Sleeve Bearing
Reznor / 131410
Reznor / 148055
Reznor / 148053
CWLE
CWSE
CWSE
131410 ●*
3200
3000
3200
3000
3300
3300
UFM3714
148055
UFM653 ● 1/12 230/460 0.60 1/4" x 2.25”6-3/4” Conduit Box - 1/4" to 5/16” Bushing Carrier / YorkCCWSE3200
131410
UFM410 UFM78
UFM653 148053
www.omnidrive.ca
(●) Ball Bearing(*) Permanent Split Capacitor Design09
• GE 11 Frame Replacements • Open Fan Cooled• Resilient Rings Included for Base Mounting• Sleeve & Sealed Ball Bearings
Features:
Refrigeration Motors3.3” Diameter
SS671 - SS672 SS1332
Stock # Amps.Volts RPM Rotation“A” Shaft Replaces
SS671 ● 1/15 2.10 / 1.10115 / 208-230 1550 CCWSE 4.50” 1231, 1331, 1431, 14325/16” x 2.20”SS672 1/15 2.10 / 1.10115 / 208-230 1550 CWSE4.50” 1342, 1441, 14425/16” x 2.20”SS1332 ● 1/20
HP
1.10208-230 1550 CCWSE4.60” 13325/16” x 2.00”
www.omnidrive.ca
10
Kitchen / Bathroom Fans, Humidifiers / Dehumidifiers,
Open Construction
• Continuous Duty• Class ‘B’ Insulation• UL Listed & CSA Approved• Shaded Pole & P.S.C• Thermally Protected• 60 Hz• Sleeve Bearings
Features:
3.3” Diameter
(●) Ball Bearing(*) Permanent Split Capacitor Design
SS368 1/20 115 1.80 2.84” CCWSESS370 ●* 1/20 115 0.77 4.09” CCWSE
SS303 ● 1/25 115 1.50 3.77” CWSESS307 1/25 115 1.45 3.30” CWSE
15” Lyall Cord & Plug
Lyall Cord & Plug
C/Box & Triangle Bracket
9” Lyall Cord & Plug
Ref-Plus
Keeprite
Caloritech / Trane
Keeprite / Nutone
SS332 1/25 115 1.50 2.59” CCWSESS360 1/35 115 1.00 2.50” CCWSE
SS304 1/40 115 0.89 2.47” CCWSE
9” Leads
3 Bolts S.E.
12” Leads
Blanchard / Bohn
Keeprite
Nutone
SS319 1/50 120 0.90 2.09” CWSESS409 1/50 115 1.30 2.12” CWSE
SS311 1/100 115 0.65 2.09” CCWSESS315 1/100 120 0.50 2.09” CWSE
18” Cord & Plug
19” Leads
6” Cord & Plug - Hex Hubs
Cord & Plug - Hex Hubs Grooved Shaft
Dehumidifier
General Replacement
Nutone
Nutone
SS350 ---- 115 1.20 2.89” CCWSE
SS305 1/50 115 1.00 2.33” CCWSE
2 Speed
9” Cord & Plug, Grooved Shaft
MarkHot
Nutone
SS318 1/20 115 1.60 2.84” CCWSESS336 1/20 115 1.80 2.50” CWSE
SS356 1/20 115 1.80 2.59” CWSESS357 1/20 115 1.80 2.59” CCWSE
“U” Bracket - Grooved Shaft
2 Bolts Opposite Shaft End
12” Leads
12” Leads
Blanchard
Woods
General Replacement
General Replacement
SS313 ● 1/15 115 2.20 3.58” CWSESS355 ● 1/15 115 2.20 3.11” CCWSE
12” Lyall Cord & Plug
Hex Hubs
Bohn / Torin / Kraack
Nutone
5/16” x 2.75”5/16” x 2.71”
5/16” x 3.28”1/4” x 1.30”
5/16” x 1.50”1/4” x 1.60”
1/4” x 1.50”
1/4” x 2.22”5/16” x 1.56”
1/4” x 1.20”1/4” x 1.20”
5/16” x 1.50”
1/4” x 1.50”
5/16” x 2.75”1/4” x 1.17”
5/16” x 2.30”5/16” x 2.30”
5/16” x 2.75”5/16” x 1.90”
Stock # HP RPMVolts Amps. Rotation“A” Comments ReplacesShaft
15501550
1550300015501550
1550
14301550
155015501050
2800
1550155015501550
15501550
SS311
SS370
SS358SS307 - SS313 - SS332SS336 - SS360 - SS368
SS315 - SS355
Unit Heaters, Unit Coolers & Display Cases
SS303
SS300 - SS356 - SS357
SS205 SS304 - SS319SS305 - SS350 - SS409
SS030 1/25 115 1.70 2.75” CWSE 12” Leads General Replacement5/16” x 2.57”1550
SS030
SS205 1/30 115 1.20 2.75” CCWSE Triangle Bracket Keeprite1/4” x 1.75”1550
SS326 1/110 115 0.40 1.90” CCWSE “U” Bracket Blanchard / Bohn1/4” x 1.45”1550
SS358 1/15 115 2.20 3.35” CWSE 12” Lyall Cord & Plug - Hex Hubs Blanchard / Bohn5/16” x 3.20”1550
SS300 1/25 115 1.80 2.59” CWSE 12” Leads Blanchard5/16” x 2.50”1550
SS318 - SS326
www.omnidrive.ca
• Continuous Duty• Class ‘B’ Insulation• UL Listed & CSA Approved• Shaded Pole & P.S.C• Thermally Protected• 60 Hz• Sleeve Bearings
Features:
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted11
SS408 - SS510
SS371
SS130
SS480
SS369SS359
SS302
Stock # HP RPMVolts Amps. Rotation“A” Comments ReplacesShaft
SS510 ~ 1/50 120 1.10 2.12” CWLESS408 ~ 1/80 115 0.60 2.20” CCWLE
SS371 ●* 1/20 230 0.36 4.09” CCWSE
SS359 1/20 208 - 230 1.10 3.35” CWSE
3 Speed - Grooved Shaft
2 Speed - 27" Leads
Lyall Cord & Plug
12" Lyall Cord & Plug - Hex Hubs
Camco / Woods
Federal Pioneer / Lau
Keeprite
Blanchard / Bohn
SS369 1/20 208 - 230 0.95 2.82” CCWSE 10” Lyall Cord & Plug Ref-Plus
1.10” x 1/4” x 1.50”1.60” x 1/4” x 1.60”
5/16" x 2.71”
5/16” x 3.20”5/16” x 2.75”
SS480 1/30 208 - 230 0.80 4.05” CWSE
SS130 1/45 208 - 230 0.80 2.71” CCWSE
8 Mounting Lugs
“U” Bracket - 36" Leads
Chromalox
Blanchard
SS302 1/100 240 0.30 2.00” CCWSE 12" Leads Federal Pioneer
3/8” x 2.38”
5/16” x 1.50”
1/4” x 1.50”
12501550
1550
15501550
1500
1550
1400
SS467 ~ 1/20 120 1.40 3.10” CWLE Cord & Plug / Hex Hubs Broan / Nutone1.70” x 5/16” x 1.70”1550
SS671 ● 1/15 2.10/1.10115/208-230 1550 CCWSE 4.50” 1231, 1331, 1431, 14325/16” x 2.20”SS672 1/15 2.10/1.10115/208-230 1550 CWSE4.50” 1342, 1441, 14425/16” x 2.20”SS1332 ● 1/20 1.10208 - 230 1550 CCWSE4.60” 13325/16” x 2.00”
SS324 ~ 1/25 2.10115 1550 CWLE2.92” 1.95” x 5/16” x 1.95” Chromalox, Thermador
Resilient Rings Included - Fan cooled
Resilient Rings Included - Fan cooled Resilient Rings Included - Fan cooled
Cord & Plug / Hex Hubs
SS467
12027 ~* 1/12 1.20120 1625/3 CWLE4.14” 120273.50” x 3/8” x 3.50”
SS462 ~* 1/12 1.20120 1625/3 CWLE 4.14” 02101 3.50” x 3/8” x 3.50”1/12 115 1.60 1050 CCWLE4.14” 3/8” x 6.10” 56347-056347 ~*
SS462
Capacitor Attached - Double Shaft
Capacitor Attached - Double Shaft
Capacitor Attached - Double Shaft
SS413 ~ 1/30 120 1.20 3.00” CCWLE 31” Cord & Plug - Grooved Shafts Lau2.25” x 1/4” x 2.25”3000
SS413
SS1332SS671 - SS672
56347 12027
Kitchen / Bathroom Fans, Humidifiers / Dehumidifiers,
Open Construction3.3” Diameter
Unit Heaters, Unit Coolers & Display Cases
SS324
www.omnidrive.ca
12
Kitchen / Bathroom Fans, Humidifiers, Unit Heaters, Fireplace Blowers
Totally Enclosed Construction
• Continuous Duty• Class ‘A’ or ‘B’ Insulation• UL Listed & CSA Approved• Shaded Pole• Thermally Protected• 60 Hz• Sleeve Bearings
Features:
3.3” Diameter
(●) Ball Bearing(*) Permanent Split Capacitor Design
Stock # HP RPMVolts Amps. Rotation“A” Comments ReplacesShaft
SS403SS213
SS262 1/40 115 1.10 2.34” CCWSESS208 1/40 115 1.20 2.50” CCWSE
SS209 1/50 115 0.85 2.30” CCWSESS201 1/50 115 0.90 2.12” CCWSESS230 1/70 115 0.66 2.33” CWSE
6” Cord & Plug
19” Leads
5” Cord & Plug
18” Leads
12” Leads
Reversomatic
General Replacement
Nutone / Miami Carey
Nutone / Air King
Coldstream / CGE
SS232 1/70 120 0.70 2.56” CWSESS203 1/70 115 0.90 2.10” CWSESS264 1/75 120 0.70 2.32” CCWSE
2 Speed
8” Cord & Plug
8” Cord & Plug
Nutone
Nutone / Miami Carey
Reversomatic
SS235 1/80 115 0.90 2.35” CWSESS260 1/90 115 0.60 2.10” CCWSESS206 1/100 115 0.56 2.10” CCWSESS403 1/125 115 0.40 2.78” CCWSE
Grooved Shaft
7” Cord & Plug
2 Speed
On/Off Switch - 72” Cord & Plug
Woods
Reversomatic
Miami Carey / Air King
Newmac
SS506 1/140 115 0.50 1.87” CCWSESS401 1/150 115 0.40 2.10” CWSE
SS207 1/80 115 0.80 2.00” CCWSE
9” Cord & Plug - Grooved Shaft
33” Leads
8” Cord & Plug
Nutone / WoodsEnterprise
Nutone / Miami Carey
SS213 1/25 115 1.40 3.09” CWSESS214 1/40 115 0.80 2.83” CCWSESS202 1/40 115 1.00 2.50” CCWSE
SS236 1/50 115 1.00 2.10” CWSE
Conduit Box - Triangle Bracket
6” Cord & Plug
2 Speed - Grooved Shaft
2 Speed - Grooved Shaft
Chromalox / Trane
Nutone / Miami Carey
Nutone
Woods
SS266 1/20 120 1.45 2.84” CCWSESS220 1/20 115 1.80 2.84” CWSESS219 1/20 115 1.80 2.84” CCWSE
5” Cord & Plug
10” Cord & Plug
10” Cord & Plug
Reversomatic
Miami Carey / Leigh
Nutone
5/16" x 1.60"1/4” x 1.95”
1/4" x 1.60"1/4" x 2.25"1/4" x 1.25"1/4” x 1.28”1/4" x 1.50"
5/16" x 2.00"
1/4" x 1.10"5/16" x 1.13"1/4" x 1.52"1/4" x 1.25"1/4" x 2.00"1/4" x 1.50"
1/4" x 1.56”
5/16" x 1.78"1/4" x 1.45”1/4” x 1.25”
1/4” x 1.00”
5/16" x 1.40"5/16" x 1.22"5/16" x 2.25"
15501550
155014302800280016001550
105015001550155014001600
1600
15502700
1575
155015501550
SS801 1/45 115 0.90 2.25” CCWSE 8” Cord & Plug Nutone5/16" x 1.90"1550
1550
SS201 - SS202 - SS203SS206 - SS207 - SS208SS230 - SS232 - SS260SS262 - SS264 - SS401 SS506
SS209 - SS214 - SS219SS220 - SS235 - SS236 SS266 - SS801
www.omnidrive.ca
• Continuous Duty• Class ‘B’ Insulation• UL Listed & CSA Approved• Shaded Pole• Thermally Protected• 60 Hz• Sleeve Bearings
Features:
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted13
Stock # HP RPMVolts Amps. Rotation“A” Comments ReplacesShaft
SS210 - SS217 - SS511
SS212S - SS212B - SS215SS440
SS440 ~ 1/20 120 1.60 3.10” CWLESS212S 1/35 240 0.55 2.80” CWSE
Double Shafted w/ Cord & Plug - Hex Hubs
Triangle Bracket
Nutone
Chromalox
SS212B ● 1/35 240 0.55 2.80” CWSESS217 1/40 240 0.50 2.30” CCWSESS210 1/50 230 0.40 2.30” CWSE
SS215 1/300 240 0.24 2.20” CWSE
Triangle Bracket
24” Leads
24” Leads
Triangle Bracket - 24" Leads
Chromalox
Chromalox / FPE
Chromalox / FPE
Chromalox
3.80” x 5/16” x 3.80” 5/16" x 3.50"5/16" x 3.50"1/4" x 1.50"1/4" x 1.50"
5/16" x 2.25"
15501550155015501550
1200SS511 1/100 230 0.38 2.00” CCWSE Groove on Shaft - 11" Leads Blanchard / FPE1/4" x 2.00”1350
Kitchen / Bathroom Fans, Humidifiers, Unit Heaters, Fireplace Blowers
Totally Enclosed Construction3.3” Diameter
www.omnidrive.ca
14(●) Ball Bearing(*) Permanent Split Capacitor Design
• Continuous Duty• Class ‘A’ or ‘B’ Insulation (Open)• Class ‘B’ Insulation (Enclosed)• UL Listed & CSA Approved• Shaded Pole• Thermally Protected• 60 Hz.• Sleeve Bearings
Features:
Stock # HP RPMVolts Amps. Rotation“A” Comments ReplacesShaft
SS2609 - SS2612
SS2604 - SS2603SS2657 - SS2658
SS174 1/10 115 3.40 1450 3.25”SS958 1/8 115 3.80 1550 3.94”
24” Leads - Hex Hubs
SS2603 1/35 115 1.15 1550 3.17”
SS2604 1/10 120 2.65 1550 3.42”
SS2658 1/15 115 2.30 1550 3.42”12” Cord & Plug - Hex Hubs
SS2657 1/15 230 1.20 1550 3.42”10” Cord & Plug - Hex Hubs
10” Lyall Cord & Plug - Hex Hubs
12” Cord & Plug
18” Leads - Hex Hubs
3/8” x 3.20”3/8” x 2.39”
1/2” x 2.10”
1/2” x 2.03”
3/8” x 2.42”3/8” x 2.42”
Fasco D174
Reversomatic DB200/260
Keeprite 8/356
Keeprite 8/335
Reversomatic DB300
Franklin 80958
CWSECWSE
CCWSE
CCWSE
CCWSECCWSE
1/12 230 1.30 1550 3.94” 13” Leads3/8” x 1.82” Franklin, 75008CCWSESS008 ●SS2609 1/30 115 1.21 1550 2.92”SS2612 1/30 115 1.21 1550 2.92”
Conduit Box
Conduit Box
1/2” x 2.35”1/2” x 2.35”
Inter-City
Inter-CityCCWSECWSE
Open
Totally Enclosed
SS958
SS008
SS174
Exhaust Fans, Coolers, Heaters, Condensers
Open / Totally Enclosed Construction4.1” Diameter
www.omnidrive.ca
(●) Ball Bearing(*) Permanent Split Capacitor Design15
Open Construction
• Continuous Duty• Mechanically Reversible• Class “B” Insulation• UL Listed & CSA Approved• Shaded Pole• Thermally Protected• 60 Hz.• Sleeve Bearings
Features:
5” Diameter
SS2605
SS2930 - SS2932 - SS2940 - SS2942
Unit Heaters, Furnace Blowers, Refrigeration
SS2398
CWSE Federal PioneerG018 ● 1/10 0.64600 1550 4.00” 1/2” x 7.23”
F062 ● 1/20 0.42600 1550 CWSE4.00” 1/2” x 2.58” HACFM
Stock # HP RPMVolts Amps. Rotation“A” Comments ReplacesShaft
SS2398 1/8 115 5.00 1050 3.88”Cushion Rings - 3 SpeedHex Hubs, 4 Bolt MountingPattern 2-9/16” x 4-1/8”
SS2930 1/10 115 / 230 4.10 / 2.00 1050 3.88”
SS2932 1/10 115 / 208-230 5.00 / 2.50 1550 3.88”
SS2940 1/10 115 / 230 4.10 / 2.00 1050 3.88”
Cushion Rings - Base 3/8”to 1/2” Bushing - 4 Studs on 3.50” B.C.D.
SS2942 1/10 115 / 208-230 5.00 / 2.50 1550 3.88”
Cushion Rings - Base 3/8”to 1/2” Bushing - 4 Studs on 3.50”B.C.D.Cushion Rings - Base 3/8”to 1/2” Bushing - 4 Studs on 3.50”B.C.D.
Cushion Rings - Base 3/8”to 1/2” Bushing - 4 Studs on 3.50”B.C.D.
1/2” x 3.75”
3/8” x 2.80”
3/8” x 2.88”
3/8” x 2.80”
3/8” x 2.88”
General Replacement
General ReplacementRobbins & MyersGE 21/29 Frame
General ReplacementRobbins & MyersGE 21/29 Frame
General ReplacementRobbins & Myers GE 21/29 Frame
General ReplacementRobbins & MyersGE 21/29 Frame
CWSE
CWSE
CCWSE
CCWSE
CWSE
SS2497
SS8318
F062G018
SS8318 1/8 2.60115 1550 CCWSE 3.50”Greenheck 308318, McMillan A0820B3680, A0820B3859, Packard 90318
1/2” x 2-3/4”
SS2605 1/12 115 3.00 1050 3.00”8” Cord & Plug, 4 Bolt Mounting Pattern 2-9/16” x 4-1/8”
1/2” x 3.00” ReversomaticCCWSE
SS2497 1/10 3.40115 1100 CWSE2.25” 1/2” x 1-5/8” A0510B2497, A0416B2059 A0510B2389
Tapped Holes on Shaft End
Includes Mounting Hardware
4 Bolts - Mounted Capacitor
Extended Thru-Bolts BX Connector
www.omnidrive.ca
SS6920
16
Totally Enclosed Construction
• Continuous Duty• Class “A” Insulation• UL Listed & CSA Approved• Thermally Protected• Shaded Pole & P.S.C Designs• Mechanically Reversible (Shaded Pole Only)• Long Life Sleeve Bearings or Sealed Ball Bearings
Features:
5” Diameter
(●) Ball Bearing(*) Permanent Split Capacitor Design
Unit Heaters, Furnace Blowers, Refrigeration
SS2615 - SS2360
J011
SS2380
1050 3.87”
Cushion Rings3 Mounting Studs S.E.
SS6920 1/15 115 2.70 1050 3.87” Cushion Rings4 Studs on 3.50” B.C.D.
Cushion Rings3 Mounting Studs S.E.
1/2” x 2.80”
1/2” x 3.25”
3/8” x 3.55”
Reznor / Luxaire
Robbins & Myers / Lennox ICP / Keeprite
Reznor / Luxaire
CWSE
CWSE
CWSE
HP RPMVolts Amps. Rotation“A” Comments ReplacesShaft
SS2360 1/15 115 2.30 1050 3.26”
SS2615 1/8 115 4.60
Stock #
SS2380 * 1/8 2.30115 1075 CWSE4.00” 1/2” x 3.00” Robbins & Myers / Reznor Resilient Base
CWSEJ011 ● 1/10 0.83600 1550 4.00” 1/2” x 7.23” 4 Studs on Shaft End Chromalox
www.omnidrive.ca
UB265 UB465
OEM Replacement Motors
Airdex
Stock # HP Amps.Volts RPM CFM“C” ShaftDiameter Replaces
UB265 1/25 1.40115 1500 2657.00” ----Blower B45227, 7017300UB465 1/15 2.60115 1550/2 46510-1/2” ----Blower B45267, 7017320
UB160 1/33 1.10115 1550 1606-3/4” ----Blower 50755-D500, 7017340
Air King
SS603 SS201 - SS206SS3670
Stock # HP Amps.Volts RPM “A” ShaftDiameter Replaces
SS603 ---- 0.63120 2400 5/8” Stack 7/32” x 2-1/8”Skeleton 2108370033, 56, 57
SS206 1/100 0.56115 1550 2.10” 1/4” x 1.52”3.3” 2108375036, 44
SS3670 ---- 0.40 / 0.26120 / 240 3000 5/8” Stack 3/16” x 1-9/16”Skeleton Vent Fan
Rotation
CCWSE
CCWSE
CWSE
SS201 1/50 0.90115 1430 2.12” 1/4” x 2.25”3.3” Vent FanCCWSE
Aston / Air2000
SS356
SS356 1/20 1.80115 1550 CWSE2.59” 5/16” x 2.30” Heat Recovery Ventilator3.3”
Stock # HP Amps.Volts RPM “A” ShaftDiameter ReplacesRotation
(●) Ball Bearing(*) Permanent Split Capacitor Design17
A2000 ● 1/25 1.20120 1550 CWSE2.85” 5/16” x 1.40” Heat Recovery Ventilator3.3”
A2000
UB160
www.omnidrive.ca
18
RMT0062
SS300
SS511
SS605
SS739BSS130
SS332
SS302
Blanchard-Ness
SS318 - SS326
Stock # HP Amps.Volts RPM Rotation“A” Shaft Replaces
SS605 --- 1.00120 2800 CCWSE5/8” Stack 3/16” x 1-3/4” 79103, 79104, E1014
Diameter
SkeletonSS358 1/15 2.20115 1550 CWSE3.32” 5/16” x 3.20” 50011, E1008, E1052, E1055, E10583.3”
SS359 1/20 1.10208 - 230 1550 CWSE3.35” 5/16” x 3.20” 5008T, 503414, E1009, E1053, E1056, E1059
3.3”
SS130 1/45 0.80230 1550 CCWSE2.71” 5/16” x 1.50” 79106, 79108, 79113, 5001M3.3”
RMT0062 ●* 1-1/2 2.50575 860 REV.5/8” x 2.50” E503956Y 10.50”208 - 230SS739B ● 1/4 1.70 825 REV.4.25” 1/2” x 6-1/2” E1026
SS302 1/100 0.30240 1400 CCWSE2.00” 1/4” x 1.50” E10043.3”
5.5”
SS358 - SS359 SS332SS9721 SS574 - SS575 SS326
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS359 1/20 1.10208 - 230 1550 CWSE3.35” 5/16” x 3.20” 5009T, 5034M3.3”SS358 1/15 2.20115 1550 CWSE3.32” 5/16” x 3.20” 5001L, 8S, 4L3.3”
SS605 --- 1.00120 2800 CCWSE5/8” Stack 3/16” x 1-3/4” Vent FanSkeleton
SS3729 ●* 1/3 2.70208 - 230 1075 REV.4.61” 1/2” x 6.00” 7.5 / 370 (Capacitor)SS3730 ●* 1/2 3.50208 - 230 1075 REV.5.11” 1/2” x 6.00” 10 / 370 (Capacitor)
5.5”5.5”
SS574 1/20 115 1.90 1550 CCWSE2.75” 5/16” x 2.50” 253-11943.3”SS575 1/20 230 0.89 1550 CCWSE2.75” 5/16” x 2.50” 253-11953.3”
Bohn / Larkin (Heatcraft)
SS605
OEM Replacement Motors
SS3729 - SS3730
SS511 1/100 0.28240 1350 CCWSE2.10” 1/4” x 2.00” 791153.3”
SS332 1/25 1.50115 1550 CCWSE2.59” 5/16” x 1.50” 79107, 5001F3.3”
SS358 - SS359
SS318 1/20 1.60115 1550 CCWSE2.85” 5/16” x 2.80” 79105, 5010S, E1007, E10573.3”
SS300 1/25 1.80115 1550 CWSE2.59” 5/16” x 2.50” E10683.3”
SS326 1/110 0.40115 1550 CCWSE1.90” 1/4” x 1.45” 79101, E1001, E1002, E10033.3”
SS9721 ●* 1/12 115 / 208 - 230 1.10 / 0.60 1550 REV.3.62” 5/16” x 3.15” 253-91013.3”
SS332 1/25 1.50115 1550 CCWSE2.59” 5/16” x 1.50” 79107, 112, 5001F, 11S, 20F, 35F3.3”SS326 1/85 0.50115 1550 CCWSE1.90” 1/4” x 1.45” 791013.3”
www.omnidrive.ca(●) Ball Bearing(*) Permanent Split Capacitor Design
16230
(also see Nutone)
99080486 - 99080487 - 9908048899080483 - 99080484 - 99080485
SS9316 - SS9317
30080058 99080481 - 99080482
30080135
Caloritech
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS303 ● 1/25 1.50115 1550 CWSE3.70” 5/16” x 3.30” Electric Heaters3.3”
SS303
SS510
Camco
OEM Replacement Motors
Broan
19
SS324
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
30080058 1/100 115 0.61 1050 CCWSE2-1/2” 5/16” x 1-7/8” 30080058, JA2C290, JA2C291
99080483 1/25 120 1.60 1550 CCWSE4.37” 3/8” x 1.45” JA2Y04399080484 1/20 120 2.00 1550 CCWSE4.37” 3/8” x 1.45” JA2Y04599080485 1/20 120 2.60 1550 CCWSE4.37” 3/8” x 1.45” JA2Y044
99080487 ~* 1/12 120 2.00 1625 CWLE4.09”99080488 ~* 1/7 120 2.70 1625 CWLE4.09” 4.14” x 3/8” x 4.14”
4.14” x 3/8” x 4.14”
16230 ● 1/8 115 3.40 1550 CWSE4.65” 3/8” x 2.40”
JE2J052
CB2J088
JE2J051, JE2J066
3.3”
3.3”3.3”
99080481 * 1/200 120 0.43 648 CCWSE2.73” 3/8” x 3.25” JA2R32299080482 * 1/70 120 0.56 745 CCWSE2.87” 3/8” x 3.00” JA2R321
3.3”3.3”
3.3
3.3”3.3”
4.1”30080135 * 1/10 120 1.80 1050 CWSE3-1/2” 1/2” x 2-3/8”SS9316 --- 115 3.40 1100 CWSE2-1/4” 1/2” x 3.00”SS9317 --- 115 4.30 1100 CWSE2-5/8” 1/2” x 2-5/8”
3008013597009316
97009317, 99080267
4.4”5.0”5.0”
SS324 ~ 1/25 115 2.10 1550 CWLE2.92” 1.95” x 5/16” x 1.95” 99080151, 99080152,30080059, 30080060
3.3”
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted
99080486 ~ 1/20 120 0.90 1625 CWLE4.44” 3.98” x 3/8” x 3.98” JE2G0953.3”
www.omnidrive.ca
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS510 ~ 1/50 1.16115 1250/3 CWLE2.12” 1.10” x 1/4” x 1.50” Humidifier3.3”
P1000-B4
Canarm / Pleasantaire
Dia.
(●) Ball Bearing(*) Permanent Split Capacitor Design
Carrier
Diameter
CGE
Stock # HP Amps.Volts RPM Rotation“A” Shaft Replaces
P1000-B4 ● 1/20 1.70115 1600/2 CWSE2.87” 5/16” x 1.75” S8-B2, S10-B2
Diameter
UFM3714
3.3”
Stock # HP Amps.Volts RPM Rotation“A” Shaft Replaces
UFM653 ● 1/12 1.20 / 0.60230 / 460 3000 CCWSE6-3/4” 1/4” x 2.25” 4653UFM3714 ●* 1/8 1.60 / 0.80115 / 230 3200 REV.7-1/8” 1/4” x 4.00” HC30GB231A
Diameter
3.3”3.3”
UFM653
Stock # HP Amps.Volts RPM Rotation“A” Shaft CommentsDiameter
SS230 1/70 0.66115 2800 CWSE2.33” 1/4” x 1.25” 12” Leads3.3”
Cancoil Thermal
DiameterDiameterStock # HP Amps.Volts RPM Rotation“A” ShaftFrame Comments
MA1074 ● 2 3.10575 1140 REV.10” 5/8” x 3.00”56Y Rigid Base - TEAO
20
OEM Replacement Motors
HD60FE5755BD1106
HD60FE575 ● 5 5.60575 - 3Ø 1725 REV.13.00” 7/8” x 3-1/4” HD60FE5756.5”5BD1106 ●* 1 2.40575 - 1Ø 1075/2 REV. 6.50” 1/2” x 5.00”5.5” F1575DD, 50HJ900575,
88C7601, X70671181-017, X70671479-001, 50HJ900575
MA1074
SS230
www.omnidrive.ca
Chromalox (Dimplex)
Coldstream
E004 - F006SS480
SS213 SS212B - SS212S - SS215SS210 - SS217SS611 - SS617 - SS635
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
Stock # HP Amps.Volts RPM “A” ShaftDiameter Replaces
SS137 1/60 0.35230 1550 2.50” Hubless3.3”
Refrigeration CasesSS122
1/70 0.59115 1550 2.25” Hubless3.3”Refrigeration Cases
Rotation
CCWSECCWSE
SS230 1/70 0.66115 2800 2.33” 1/4” x 1.25”3.3” Refrigeration CasesCWSE
SS230SS122 - SS137
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design21
SS210 1/50 0.40230 1550 CWSE2.30” 1/4” x 1.56” 2868-407-128, 2868-405-168, 2868-405-131 3.3”
SS635 --- 1.20208 - 240 1550 CCWSE1-1/2” Stack 1/4” x 1.50” HeaterSkeleton
SS3670 --- 0.40 / 0.26120 / 240 3000 CWSE5/8” Stack 3/16” x 1.50” HeaterSkeletonSS611 --- 0.60120 1500 CCWSE1/2” Stack 3/16” x 1.65” HeaterSkeletonSS617 --- 0.22208 - 240 1900 CWSE3/8” Stack 3/16” x 1.30” 04290-004Skeleton
SS213 1/25 1.40115 1550 CWSE3.10” 5/16” x 1.78” 2868-507-125, 2868-511-0203.3”
SS212B ● 1/35 0.55240 1550
CWSE
2.84” 5/16” x 3.50”
2868-511-105
3.3”CWSE 2868-405, 23405, 23388
SS215 1/300 0.24240 1200 CWSE2.22” 5/16” x 2.25” 2868-505-016, 0853.3”SS217 1/40 0.50240 1550 CCWSE2.34” 1/4” x 1.56” 2868-407-1303.3”
CWSE 2868-405, 23405, 233881/30 0.55240 1550
REV.
2.80” 5/16” x 3.54”
03167-007
3.3”SS480 1/30 0.80208 - 240 1500
REV.
4.05” 3/8” x 2.38”
01520-020
3.3”
E004 ● 1/6 0.30575 - 3Ø 1140 4.37” 1/2” x 4.60”5.5”
SS212S
F006 ● 1/6 0.30575 - 3Ø 1725 4.80” 1/2” x 4.60”5.5”
CWSE 01520-003, 01520-007CWSE 01520-115
G018 ● 1/10 0.64600 1550 4.00” 1/2” x 7.23”5.0”J011 ● 1/10 0.83600 1550 4.00” 1/2” x 7.23”5.0”
J011G018
SS3670
www.omnidrive.ca
Dundas Foundry
(●) Ball Bearing(*) Permanent Split Capacitor Design
Dunham Bush
Stock # HP Amps.Volts RPM CFM“C” Shaft ReplacesDiameter
Stock # HP Amps.Volts RPM “A” ShaftDiameter ReplacesRotation
UFB500 1/33 1.10115 2860 1406.00” ---- 4C442, RFB500Blower
SS124 - SS125 SS9428
SS124 ● 1/20 1.55115 1550 CWSE2.80” Hubless 350044, 350046, MM28473.3”SS125 ● 1/20 0.80230 1550 CWSE2.80” Hubless 350043, 350045, MM28483.3”SS9428 1 1.70575-3Ø 1100 REV.7.50” 1/2” x 2.75” 142935, HM3T007, 0105.5”
22
OEM Replacement Motors
UFB500
www.omnidrive.ca
Drolet
Rotation
Stock # HP Amps.Volts RPM CFM“C” Shaft ReplacesDiameter
UB33 1/50 0.88115 3200 1006-3/4” ---- RB33, Wood & Pellet StoveBlower
Elmira
Stock # HP Amps.Volts RPM CFM“A” Shaft ReplacesDiameter
UB200T-2
UB200T-2 1/100 0.60120 1600 20014.96” 5/16” x 3.25” 2812-681-002, RB200T-2Blower
UB33
Enterprise Foundry
Stock # HP Amps.Volts RPM “A” ShaftDiameter ReplacesRotation
Fasco
Rotation
Stock # HP Amps.Volts RPM CFM“C” Shaft ReplacesDiameter
SS401
SS401 1/150 0.40115 1600 CWSE2.10” 1/4” x 1.60” Heaters3.3”
UB265 UB465UB3 UB5
UB3 1/50 0.80120 3000 1005-1/2” ----Blower B24220UB5 1/125 0.40115 1550 504.94” ----Blower B30
UB265 1/25 1.40115 1550 2657.00” ----Blower B45227UB465 1/15 2.60115 1550 46510-1/2” ----Blower B45267UFB500 1/33 1.10115 2860 1406.00” ----Blower 850752-D500
UB160 1/33 1.10120 1550 1606.50” ----Blower 50755-D500
(Blowers)
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design23
Electrohome
Rotation
Stock # HP Amps.Volts RPM CFM/Rotation“C”/“A” Shaft ReplacesDiameter
UB4UB3 UB5UB1
UB3 1/50 0.80120 3000 1005-1/2” ----Blower EB3
UB5 1/125 0.40115 1550 504.94” ----Blower EB5UB4 ● 1/40 0.88120 3000 1005.58” ---- EB4
UB1 1/30 1.20115 2700 2008-1/2” ---- EB1
Blower
Blower
SS324 ~ 1/25 2.10115 1550 CWLE2.92” 1.95” x 5/16” x 1.95”3.3” 2568-511-098
SS324
SS403 1/125 0.40115 1550 CCWSE2.77” 1/4” x 1.25”3.3” Heaters
SS403
UB160 UFB500
www.omnidrive.ca
Fasco
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS174UFM410 SS2658
SS359SS212B
SS3103 ----
SS356 - SS357- SS368 - SS369SS213
0.81120 3000 CCWSE
SS370 - SS371
3/4” Stack 7/32” x 2-7/16”Skeleton K109SS212B ● 1/35 0.55230 1550 CWSE2.80” 5/16” x 3.50”3.3” D1118SS213 1/25 1.40115 1550 CWSE3.10” 5/16” x 1.78”3.3” D184SS356 1/20 1.80115 1550 CWSE2.59” 5/16” x 2.30”3.3” D132
SS359 1/20 1.10208 - 230 1550 CWSE3.35” 5/16” x 3.20”3.3” D1126SS368 1/20 1.80115 1550 CCWSE2.88” 5/16” x 2.80”3.3” D1101SS369 1/20 0.95208 - 230 1550 CCWSE2.82” 5/16” x 2.75”3.3” D1103
SS357 1/20 1.80115 1550 CCWSE2.59” 5/16” x 2.30” 3.3” D133
SS174 1/10 3.40115 1450 CWSE3/8” x 3.20”4.1” D174
SS370 ●* 1/20 0.77115 1550 CCWSE4.10” 5/16” x 2.71”3.3” D1243SS371 ●* 1/20 0.37230 1550 CWSE4.10” 5/16” x 2.71”3.3” D1245
SS440 ~ 1/20 1.60120 1550 CWLE3.16” 3.80” x 5/16” x 3.80”3.3” D1163SS510 ~ 1/50 1.10120 1250 CWLE2.12” 1.19” x 1/4” x 1.53”3.3” D1134UFM410 ●* 1/10 1.40 / 0.70115 / 230 3000 REV.7.12” 1/4” x 3.75”3.3” D410
SS2658 1/15 2.30115 1550 CCWSE3.42” 3/8” x 2.44”4.1” D1246
SS409 1/50 1.30115 1550 CWSE2.12” 5/16” x 1.56”3.3” D126
3.25”
Federal Pioneer
Rotation
Stock # HP Amps.Volts RPM Rotation“A” Shaft CommentsDiameter
SS408SS217 - SS210 - SS511 S302
SS302 1/100 0.30240 1400 CCWSE2.00” 1/4” x 1.50” L81512W1
SS408 ~ 1/80 0.60115 1550 CCWLE2.20” 1.60” x 1/4” x 1.60” Electric HeaterSS511 1/100 0.28240 1350 CCWSE2.10” 1/4” x 2.00” Electric Heater
SS210 1/50 0.40230 1550 CWSE2.30” 1/4” x 1.50” Electric HeaterSS217 1/40 0.50240 1550 CCWSE2.30” 1/4” x 1.60” L82116A4
3.3”
3.3”3.3”
3.3”3.3”
24
OEM Replacement Motors
SS409 SS440
SS3103
www.omnidrive.ca
SS510
Foster
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS605 --- 1.00120 2800 CCWSE5/8” Stack 3/16” x 1-3/4” 366864SS120 1/70 0.63115 1550 CCWSE2.25” Hubless Refrigeration CasesSS119 1/70 0.70115 1550 CWSE2.22” Hubless Refrigeration CasesSS127 1/80 0.75115 1600 CWSE2.00” Hubless Refrigeration CasesSS101 1/45 0.90115 1550 CCWSE2.34” Hubless Refrigeration Cases
1/45 0.90115 1550 CCWSE2.34” Hubless Refrigeration CasesSS103 1/45 0.90115 1550 CWSE2.36” Hubless Refrigeration Cases
Skeleton3.3”3.3”3.3”3.3”3.3”3.3”
SS101L
SS103L 1/45 0.90115 1550 CWSE2.34” Hubless Refrigeration Cases3.3”SS124 ● 1/20 1.55115 1550 CWSE2.80” Hubless Refrigeration Cases3.3”SS122 1/60 0.35230 1550 CCWSE2.50” Hubless Refrigeration Cases3.3”SS125 ● 1/20 0.80230 1550 CWSE2.80” Hubless Refrigeration Cases3.3”
Stock # HP Amps.Volts RPM CFM/Rotation“C”/”A” Shaft ReplacesDiameter
Franklin
UB4 1/40 0.88120 3000 1005-1/2” ----Blower 76004, 80042UB5 1/125 0.40115 1550 504.94” ----Blower B30, 76005, 80239
UB265 1/25 1.40115 1550 2657.00” ----Blower B45227, 80224, 8214117524UB465 1/15 2.60115 1550 46510-1/2” ----Blower B45267
UB160 1/33 1.10120 1550 1606.59” ----Blower 50755-D500, 80611
SS008 ● 1/12 1.30230 1550 CCWSE3.94” 3/8” x 1.82” 750084.1”
UB1 1/30 1.20115 2700 1408.30” ---- 76001Blower
Stock # HP Amps.Volts RPM CFM“C” Shaft ReplacesDiameter
General Purpose(Blowers)
UB1 1/30 1.10115 2860 6.00” ----Blower RB1, B24220UB3 1/50 0.80120 3000 5.42” ----Blower RB3, B30
UB265 1/25 1.40115 1500 7.00” ----Blower RB265, B45227UB465 1/15 2.60115 1550 10-1/2” ----Blower RB465, B45267
UB160 1/33 1.10115 1550 5.00” ----Blower RB160, 50755-D500
140100
265465
160
(●) Ball Bearing(*) Permanent Split Capacitor Design25
OEM Replacement Motors
SS119 - SS120 SS101 - SS103 -SS122 SS101L - SS103LSS127 SS124 - SS125SS605
UB4 UB5UB1 UB265 UB465UB160 SS008
UB1 UB265 UB465UB160UB3
www.omnidrive.ca
General Purpose
(●) Ball Bearing(*) Permanent Split Capacitor Design
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS356 1/20 1.80115 1550 CWSE2.59” 5/16” x 2.30”3.3” R356, D132SS357 1/20 1.80115 1550 CCWSE2.59” 5/16” x 2.30” 3.3” R357, D133UFM78 ●* 1/10 1.30 / 0.70115 / 230 3200 REV.4-1/8” 5/16” x 3.25” RFM783.3”UFM653 ● 1/12 1.20 / 0.60230 / 460 3000 CCWSE6-3/4” 1/4” x 2.25” RFM653UFM3714 ●* 1/8 1.60 / 0.80115 / 230 3200 REV.7-1/8” 1/4” x 4.00” RFM3714
3.3”3.3”
SS958 1/8 115 3.80 1550 3.94” 3/8” x 2.44” R2390CWSE4.1”5.0”5.0”5.0”5.0”5.0”
R409, D126SS409 1/50 1.30115 1550 CWSE2.12” 5/16” x 1.56”3.3”
R2942
R2930R2398
R2940R2932
SS2398 1/8 115 5.00 1050 3.87”SS2930
1/10115 / 230 4.10 / 2.00 1050 3.87”
SS29321/10
115 / 208-230 5.00 / 2.50 1550 3.87”SS2940 1/10 115 / 230 4.10 / 2.00 1050 3.87”SS2942 1/10 115 / 208-230 5.00 / 2.50 1550 3.87”
1/2” x 3.75”3/8” x 2.80”3/8” x 2.80”3/8” x 2.80”3/8” x 2.80”
CWSECWSECCWSECCWSECWSE
UFM653UFM78
SS2398 SS2930 - SS2932 - SS2940 - SS2942
SS356 - SS357
Grainger (Dayton)
Stock # HP Amps.Volts RPM CFM/Rotation“C”/“A” Shaft ReplacesDiameter
UB265 UB465 SS262 SS356
UB265 1/25 1.40115 1500 2657.00” ----Blower 4C447, B45227UB465 1/15 2.60115 1550/2 46510-1/2” ----Blower 4C448, B45267
UB160 1/33 1.10115 1550 1606-3/4” ----Blower 4C458, 50755-D500
SS262 1/40 1.10115 1550 CCWSE2.34” 5/16” x 1.50” 3M723SS356 1/20 1.80115 1550 CWSE2.32” 5/16” x 2.30” 3M547
3.3”3.3”
26
OEM Replacement Motors
SS958
SS409
SS208 1/40 1.20115 1550 CCWSE2.50” 5/16” x 1.95”3.3” R208
SS208
UFM3714
UB160
www.omnidrive.ca
Greenhouse Blowers
Stock # HP Amps.Volts RPM CFM“C” Shaft ReplacesDiameter
UFB500 1/33 1.10115 2860 1406.00” ----
UFB500
4C442, RFB500Blower
UB265 1/25 1.40115 1550 7.00” ----Blower B45227UB465 1/15 2.60115 1550 10-1/2” ----Blower B45267
UB160 1/33 1.10120 1550 6.59” ----Blower 50755-D500265465
160
UB265 UB465UB160
Heat & Glow
Stock # HP Amps.Volts RPM CFM“A” Shaft ReplacesDiameter
UB168
UB168 ---- 1.00115 3000 16812-3/8” ---- GFK-160A, 7002-1241Blower
Heritage
Stock # HP Amps.Volts RPM CFM“C” Shaft ReplacesDiameter
UB33 1/50 0.88115 3200 1006-3/4” ---- Wood StoveBlower
UB33
(●) Ball Bearing(*) Permanent Split Capacitor Design27
OEM Replacement Motors
Greenheck
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS8318 1/8 2.60115 1550 CCWSE3.50” 1/2” x 2-3/4” 3083185.0”
SS8318
www.omnidrive.ca
(●) Ball Bearing(*) Permanent Split Capacitor Design
Hussmann
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
Ideal
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
Intercity
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS34201 ●* 1/5 0.50575 - 1Ø 1075 CCWSE4.50” 1/2” x 3.30”5.0” 1042140, 204201, R34201, R30575
J055 ●* 1/6 0.80575 - 1Ø 1650 REV.4.32” 1/2” x 3.20”5.5” 77238, 1042140, R30575
J055
SS108 1/100 0.60115 1550 CWSE2.00” Hubless Evaporator MotorSS123 1/70 0.60115 1550 CCWSE2.59” Hubless Evaporator Motor
3.3”3.3”
SS108 - SS123
SS2609 1/30 1.21115 1550 CCWSE2.94” 1/2” x 2.38” UE009SS2612 1/30 1.21115 1550 CWSE2.94” 1/2” x 2.38” UE010
4.1”4.1”
SS2609 - SS2612
28
OEM Replacement Motors
SS611 --- 0.60120 1500 CCWSE1/2” Stack 3/16” x 1.65” HeaterSkeleton
SS611
F062 ● 1/20 0.42600 - 1Ø 1550 CWSE4.00” 1/2” x 2.58”5.5” 206578, DA2F062, DA2F091
F062
Hunter
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS108 1/100 0.60115 1550 CWSE2.00” Hubless 2-SR3.3”
SS108
SS34201
www.omnidrive.ca
Keeprite
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
Krack (Hussmann)
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS2269 1/15 2.70115 1050 CWSE2.97” 1/2” x 3.00”5.0” 160269
SS205 1/30 1.20115 1550 CCWSE2.75” 1/4” x 1.70”3.3” 11796-8, R205
SS360 1/35 1.20115 1550 CCWSE2.50” 1/4” x 1.60”3.3” 50424, 1043291SS370 ●* 1/20 0.77115 1550 CCWSE4.10” 5/16” x 2.71”3.3” 501898, 501899, 505124SS371 ●* 1/20 0.36230 1550 CCWSE4.10” 5/16” x 2.71”3.3” 501908, 501909, 505125SS2658 1/15 2.30115 1550 CCWSE3.42” 3/8” x 2.42”4.1” 81356SS2657 1/15 1.20230 1550 CCWSE3.42” 3/8” x 2.42”4.1” 81335
E015 1/20 0.89230 1050/3 CCWSE3.44” 1/2” x 2.38”5.5” 130784J055 ●* 1/6 0.80575 - 1Ø 1650 REV.4.32” 1/2” x 3.20”5.5” 1042140G004 ● 1/4 0.46575 - 3Ø 1100 REV.6.00” 5/8” x 3.00”5.5” 1710655BD1076 ● 3/4 2.30575 - 1Ø 1075/2 REV.6.30” 4-1/2” x 5.00” 5.5” HQ1095096
SS370 - SS371SS205 SS307 SS2657 - SS2658SS360
SS313 ● 1/15 2.20115 1550 CWSE3.58” 5/16” x 3.00” E2064443.3”
Larkin (See Bohn)
(●) Ball Bearing(*) Permanent Split Capacitor Design29
OEM Replacement Motors
SS307 1/25 1.45115 3000 CWSE3.30” 1/4” x 1.30”3.3” 85680
SS313
J055 5BD1076G004SS2269 E015
www.omnidrive.ca
Lau
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS408 ~ 1/80 0.60115 1550 CCWLE2.20” 1.60” x 1/4” x 1.60” 421306-01SS413 ~ 1/30 1.20120 3000 CCWLE3.00” 2.25” x 1/4” x 2.25”
3.3”3.3” 421532-02
SS408 SS413
Lear (Siegler)
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS108 1/100 0.60115 1550 CWSE2.00” Hubless Furnace3.3”
SS108
Leigh
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS220
SS220 1/20 1.80115 1550 CWSE2.84” 5/16” x 1.22” 16603, 977213.3”
Luxaire (See York)
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted 30www.omnidrive.ca
Loren Cook
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS2224 - SS3234 - SS4200 SS5200 SS6264 - SS7274 C06E2A C07E4A C09E4A
SS2224 1/114 0.75 115 1500 CWSE2-3/8” 3/8” x 2-3/4”SS3234 1/16 2.20115 1550 CWSE2-5/8” 3/8” x 2-1/2”SS4200 1/23 1.50115 1500 CWSE2-5/8” 3/8” x 2-3/4”SS6264 1/11 4.60115 1500 CWSE3.00” 1/2” x 6-1/4”
SS7274 * 1/4 3.90115 1625 CWSE3 3/8” 1/2” x 6-1/4”
4.4”4.4”4.4”4.4”
5.0”
220/240, 615053320/340, 615054420, 615055620/640, 615057
720/740, 615058
1/6 1.80115 1100 CWSE3.83” 1/2” x 3.43” 5.5” 100170, K55HXDRT-498C07E4A * CK48HCZ1M75
1/8 1.40115 1600 CWSE3.53” 1/2” x 3.00” 5.5”C06E2A * C03E2A, CK48HC21P87, 100133
1/3 4.80115 1080 CWSE5.00” 1/2” x 3.00” 5.5” 100172, CK48HC21589C09E4A *
Markhot
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS133 1/30 1.10115 1550 CWSE2.63” Hubless 5DH1A1-P456SS350 --- 1.20115 1050 CCWSE2.89” 5/16 x 1.50” 5AA1A3-P4SG156 1/20 2.10115 1550 CWSE3.27” 5/16” x 3.20” 8424015054J020P* 1/10 1.60115 1550 CWSE3.50” 1/2” x 3.93” Unit Heater
3.3”3.3”4.1”5.6”
SS133 G156J020PSS350
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design31
Lomanco
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS2497
SS2497 1/10 3.40115 1100 CWSE2.25” 1/2” x 1-5/8”5.0” A0510B2497, A0416B2059 A0510B2389
SS5200 * 1/16 1.50115 1200 CWSE3.00” 3/8” x 2-1/4”5.0” 520, 615056
www.omnidrive.ca
Miami-Carey
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design 32
SS610 --- 1.20120 2400/2 CCWSE7/8” Stack 7/32” x 1-3/16” 1V4217
SS207 1/80 0.80115 1600 CCWSE2.00” 1/4” x 1.50” Vent Fan
SS214 1/40 0.80115 2700 CCWSE2.87” 1/4” x 1.45” Vent FanSS209 1/50 0.85115 1550 CCWSE2.30” 1/4” x 1.60” 1V3117, 39328
SS203 1/70 0.90115 1600 CWSE2.10” 1/4” x 1.50” 1V2430
SS220 1/20 1.80115 1550 CWSE2.87” 5/16” x 1.30” 1V2429
Skeleton
3.3”
3.3”3.3”
3.3”
3.3”
Newmac
Stock # HP Amps.Volts RPM CFM/Rotation“C”/“A” Shaft ReplacesDiameter
SS403
SS403 1/125 0.40115 1550 CCWSE2.78” 1/4” x 1.25”3.3” 7017011UB33 1/50 0.88115 3200 1006-3/4” ----Blower 2040001
Nordica
Stock # HP Amps.Volts RPM CFM”C” Shaft ReplacesDiameter
UB3 UB33
UB3 1/50 0.80120 3000 1005-1/2” ----Blower B24220UB33 1/50 0.88115 3200 1006-3/4” ----Blower Diamond & Furnace
Variable Speed
SS206 1/100 0.56115 1550 CCWSE2.10” 1/4” x 1.52” Vent Fan3.3”
SS610 SS209 - SS214 - SS220SS203 - SS206 - SS207
UB33
www.omnidrive.ca
Stock # HP Amps.Volts RPM Rotation“A” Shaft Replaces
SS611 --- 0.60120 1500 CCWSE1/2” Stack 3/16” x 1.65” 3008001
SS603 --- 0.63120 2400 CCWSE5/8” Stack 7/32” x 2-1/8” 81096, 81795, 81826, 81827,SS601 --- 0.75120 3000 CCWSE3/4” Stack 1/4” x 2-5/16” 30070007, 162
SS605 --- 1.00120 2800 CCWSE5/8” Stack 3/16” x 1.74” Vent Fan
Diameter
Skeleton
SkeletonSkeleton
SkeletonSS604 --- 0.78120 2700 CCWSE5/8” Stack 3/16” x 1.26” 81058
SS613 --- 0.56120 1600 CCWSE5/8” Stack 7/32” x 2.50” 64620
Skeleton
Skeleton
SS610 --- 1.20120 2400/2 CCWSE7/8” Stack 7/32” x 1.21” 300990011, 12, 51000Skeleton
SS467 ~ 1/20 1.40120 1550 CWLE3.10” 1.70” x 5/16” x 1.70” 30080059, 300800603.3”SS440 ~ 1/20 1.60120 1550
CCWSE3.16” 3.80” x 5/16” x 3.80” 81905, 80734, 267573.3”
SS506 1/140 0.50115 1400 CCWSE1.87” 1/4” x 2.00” 2868-402-001, 0043.3”SS801 1/45 0.90115 1550 CCWSE2.25” 5/16” x 1.87”3.3”
SS3100 --- 0.59115 3000 CCWSE5/8” Stack 7/32” x 1-11/16” C-65878
SS3670 --- 0.40 / 0.26120 / 240 3000 CWSE5/8” Stack 3/16” x 1-9/16” Vent Fan Kit
Skeleton
Skeleton
SS3101 --- 0.70120 3000/2 CWSE7/8” Stack 7/32” x 1-15/16” C-52736, C-27987SkeletonSS3103 --- 0.81120 3000 CCWSE3/4” Stack 7/32” x 2-7/16”Skeleton
81993, 81994, K2230
SS315 1/100 0.50120 1550 CWSE2.09” 1/4” x 1.20” 2868-507-0983.3”SS311 1/100 0.65115 1550 CCWSE2.10” 1/4” x 1.20” 2868-505-0223.3”
SS304 1/40 0.89115 1550 CCWSE2.47” 1/4” x 1.60” Vent Fan3.3”SS305 1/50 1.00115 2800 CCWSE2.33” 1/4” x 1.50” 806953.3”SS307 1/25 1.45115 3000 CWSE3.30” 1/4” x 1.26” 856803.3”
SS355 ● 1/15 2.20115 1550CWLE
3.10” 5/16” x 1.90” 819183.3”
SS209 1/50 0.85115 1550 CCWSE2.34” 1/4” x 1.56” 80230, 804693.3”SS207 1/80 0.80115 1600 CCWSE2.00” 1/4” x 1.56” 2868-405, 23405, 233883.3”
SS201 1/50 0.90115 1430 CCWSE2.12” 1/4” x 2.20” 186923.3”SS202 1/40 1.00115 1550 CCWSE2.47” 1/4” x 1.30” 2868-407, 409,076, 828793.3”SS203 1/70 0.90115 1600 CWSE2.09” 1/4” x 1.56” Vent Fan3.3”
1/40 0.80115 2700 CCWSE2.83” 1/4” x 1.45” Vent Fan3.3”SS219 1/20 1.80115 1550 CCWSE2.84” 5/16” x 2.20” 80405, 807473.3”SS232 1/70 0.70120 2800 CWSE2.56” 1/4” x 1.28” 80215, 80675, 267333.3”
SS214
Nutone(also see Broan)
118013, 18692, 26754, 80101, 80469
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted33
SS3100SS605 - SS610SS601 - SS603 - SS613 SS3670
SS467SS209 - SS214 - SS219 SS801
SS304 - SS305 SS307 SS440SS311 - SS315 - SS355SS201 - SS202 - SS203SS207 - SS506 - SS232
www.omnidrive.ca
C-63676, C-68626, 27
SS3101SS604 - SS611 - SS3103
63747 - 63748 6382163749 63750
60024 - 60030
60076 - 63699 63751 - 63752
Ouellet
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted 34
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS212S 1/35 0.55230 1550 CWSE2.80” 5/16” x 3.50” MOT03SS217 1/40 0.50230 1550 CCWSE2.30” 1/4” x 1.50” MOT04MO-019 1/25 0.70240 1550 CWSE2.75” 5/16” x 3.50” JA2P265MO-020 ● 1/30 0.64240 1550 CCWSE2.88” 5/16” x 1.50” JB2P080MO-022 ● 1/3 0.68575 - 3Ø 1140 REV.6.37” 1/2” x 4.56” 12348-001
1/6 0.30575 - 3Ø 1140 REV.4.37” 1/2” x 4.60” 3J124HAXF026 ● 1/3 0.90480 / 575 -1Ø 1725 CWSE4.32” 1/2” x 4.13” PCA1800-61-1, MOT07
3.3”3.3”3.3”3.3”5.5”5.5”5.5”
E004 ●
56342
Nutech
SS2655
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS2655 ●*~ 1/12 1.34120 1550 CCWLE 3.16” A0812B23552.82” x 3/8” x 2.82”5.5”
SS212S - MO-019 MO-020 E004 F026MO-022
56342 - 56343 56344 56346
63745 - 63746
56345 5634856347
Penn Ventilator (Zephyr)
1/70 115 1.00 / 0.50 1550/2 CWSE2.46” 3/8” x 5-1/2”56343 0.27 115 1.32 1550/2 CWSE2.46” 3/8” x 5-3/4”56344 ●* 0.08 115 1.60 / 1.00 1550/2 CWSE4.11” 3/8” x 4.75”
56346 ●* 0.27 115 3.20 / 1.90 1550/2 CWSE4.62” 3/8” x 5.50”
56342-056343-0, JA2M41456344-0, JE2H047
56346-0, JE2K0071/12 115 1.60 1050 CCWLE4.14” 6.10” x 3/8” x 6.10” 56347-056347 ~*
3.3”3.3”3.3”
3.3”3.3”
56348 ~ 1/10 115 3.90 1050 CCWLE3.62” 6-1/4” x 1/2” x 6-1/4” 56348-05.0”
56345 * 1/25 115 1.00 1050 CWSE4.80” 3/8” x 4.75” 56345-03.3”
(Continued on Page 35)
SS217
60024 1/30 115 1.40 1550 CWSE2.75” 5/16” x 1-1/2” 60024-03.3”
www.omnidrive.ca
Ref Plus
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
Reversomatic
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design35
RMT0004 ● 34W 1.60 115 1550 CCWSE3-9/16”RMT0005 ● 34W 0.80230 1550 CCWSE3-9/16”
HublessHubless
NU-34-45-2/1543NU-34-45-4/1542
SS368 1/20 1.80 / 2.10115 1550 / 1300 CCWSE2.84” 5/16” x 2.75” RMT-00113.3”SS369 1/20 0.95208 / 230 1550 CCWSE2.84” 5/16” x 2.75” RMT-00123.3”MA1074 ● 2 3.10575 1140 REV.10.00” 5/8” x 3.00”56Y RMT-0064
SQSQ
SS630 --- 0.75120 3000 CCWSE1/2” Stack 7/32” x 1-13/16” EB50SS260 1/90 0.60115 1500 CCWSE2.09” 5/16” x 1.09” B100, EB60SS262 1/40 1.10115 1550 CCWSE2.34” 5/16” x 1.60” K100, BB100SS264 1/75 0.70120 1550 CCWSE2.34” 5/16” x 2.06” QK100SS266 1/20 1.45120 1550 CCWSE2.84” 5/16” x 1.40” BK100
1/35 1.15115 1550 CCWSE3.17” 1/2” x 2.10” DB200, DB260SS2604 1/10 2.65120 1550 CCWSE3.42” 1/2” x 2.05” DB300
Skeleton3.3”3.3”3.3”3.3”4.1”4.1”
SS2603
SS2605 1/12 3.00115 1050 CCWSE2.97” 1/2” x 1.98” QBD300, GPD4505.0”
SS2603 - SS2604SS630 SS2605SS260 - SS262 - SS264 - SS266
RMT0062 ●* 1-1/2 2.50575 860 REV.10.50” 5/8” x 2.50” 43846, 4342456Y
www.omnidrive.ca
60030 1/80 115 0.74 1400 CWSE2.17” 1/4” x 1-3/4” 60030-01/6 115 3.40 1300/2 CWSE4.34” 1/2” x 2.65” 60076-060076 ●*
3.3”5.5”
SS368 - SS369RMT0062 MA1074RMT0004 - RMT0005
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
63745 * 1/30 115 0.50 / 0.40 1550/2 CWSE3.54” 3/8” x 3.69” 63745-063746 ●* 1/12 115 1.50 / 0.90 1550/2 CWSE4.10” 3/8” x 3.40” 63746-0, JE2H05763747 * 1/7 115 2.50 1550/3 CWSE4.00” 1/2” x 2.20”63748 * 1/6 115 1.80 1550/3 CWSE4.00” 1/2” x 2.60”
63821 ● * 1/4 115 2.70 1550 CCWSE5.00” 1/2” x 2.60”
63748-0
63821-0
63747-0
3.3”3.3”4.4”4.4”
4.4”
63749 ●* 1/4 115 2.80 1725 CWSE4.52” 1/2” x 3.00” 63749-063750 ●* 1/3 115 4.00 1550/3 CWSE6.00” 1/2” x 5.55”63751 ●* 1/2 120 5.00 1650/2 CWSE4.27” 1/2” x 5.50”63752 ●* 3/4 115 8.60 / 9.60 1625 CWSE5.72” 1/2” x 5.33”
63751-063752-0
63750-05.5”5.5”5.5”5.5”
63699 ●* 1/4 115 3.40 1725 CWSE4.37” 1/2” x 4.77” 63699-05.5”
Penn Ventilator (Zephyr)(Continued from Page 34)
Reznor
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design 36
Swimming Pool Heat Pump (MaxTemp)
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
87219
87219 1/25 0.86230 1550 CWSE2-3/4” 5/16” x 1.88”3.3” 7163-7219
Schwank
UB579
UFM78 ●* 1/10 1.30 / 0.70115 / 230 3200 REV.4-1/8” 5/16” x 3.25” 43846 & 43424
148053 ●* 1/20 0.70115 3300 CWSE4.54” 5/16” x 3.00” 148053148055 1/33 1.00115 3300 CWSE3.26” 5/16” x 2.00” 148055SS2360 1/15 2.30115 1050 CWSE3.26” 1/2” x 2.80” R2360SS6920 1/15 2.70115 1050 CWSE3.87” 3/8” x 3.62” R6920SS2615 1/8 4.60115 1050 CWSE3.87” 1/2” x 3.25” R2615
3.3”
3.3”3.3”5.0”5.0”5.0”
Stock # HP Volts RPM Rotation “C” “D” “F” “J” “K” “L” “M”
UB579 1/35 120 3000 CWLE 5.38” 1.88” 3.30” 4.50” 4.13” 4.13” 1.75” 2.58”5.13”
“H” “W”
UFM410 ●* 1/10 1.40 / 0.70115 / 230 3000 REV.6.98” 1/4” x 3.70” D410, 43846 & 434243.3”
Amps.
1.20
131410 * 1/10 1.60115 3000 CWLE4.10” 5/16” x 3.20” 1314103.3”
SS2380 * 1/8 2.30115 1075 CWSE4.00” 1/2” x 3.00” R23805.0”
148055UFM78 SS2360 - SS6920 - SS2615UFM410 148053 SS2380131410
www.omnidrive.ca
950-1020 950-1022950-1021
Tjernlund
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
Torin
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design37
950-1020 1/25 1.37 115 3000 CCWSE4.20” 950-10205/16” x 2.25”3.3”
SS610 --- 120 1.20 2400/2 CCWSE7/8” Stack 76271717/32” x 1-3/16”SkeletonSS313 ● 1/15 115 2.20 1550 CWSE3.58” Evaporator5/16” x 3.00”3.3”
SS2799 * 1/6 115 2.60 950/5 CWSE3.98” DD-0301/2” x 4.40”5.5”
SS313SS610
Trane
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS303 ● 1/25 115 1.50 1550 CWSE3.77” 702700105/16” x 3.26”3.3”SS213 1/25 115 1.40 1550 CWSE3.09” 702000115/16” x 1.78”3.3”
SS303 - SS213
Temspec
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS799 * 1/8 2.10 115 1000/5 CWSE3.61” DD-0291/2” x 5.00”5.0”
SS799 - SS2799
950-1022 ●* 1/5 115 2.80 1700 CCWSE4.87” 950-10221/2" x 3.40”5.5”950-1021 * 1/7 1.50 115 3300 CCWSE5.42” 950-10213/8” x 2.25”3.3”
www.omnidrive.ca
Tyler
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted 38
Venmar, VanEE
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS605 --- 120 1.00 2800 CCWSE5/8” Stack Evaporator3/16” x 1.74”Skeleton
11811 * 1/6 2.10120 1630 / 2 CCWSE5.10”
12027 ~* 1/12 1.20120 1625 / 3 CWLE4.14”
11811, ER40200
12027
3/8” x 1.90”
3.50” x 3/8” x 3.50”
3.3”
3.3”SS348 * 1/15 1.30115 1550 / 2 CWSE 5.00” M1703, 11802100 3/8” x 3.00”3.3”SS438 * 1/14 1.46115 1625 / 2 CCWSE 4.05” 01038 5/16” x 1.88”3.3”SS462 ~* 1/12 1.20120 1625 / 3 CWLE 4.14” 02101 3.50” x 3/8” x 3.50”3.3”
12026 ~•* 1/8 1.89120 1630 CWLE 4.75” 120262.93” x 3/8” x 2.93”3.3”
SS605
11811 1202712026 SS438 SS462
SS2799 * 1/6 115 2.60 950/5 CWSE3.98” DD-0301/2” x 4.40”5.5”
Unilux
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS799 * 1/8 2.10 115 1000/5 CWSE3.61” DD-0291/2” x 5.00”5.0”
SS799 - SS2799
SS348
www.omnidrive.ca
SS336 SS510SS235 - SS236 SS506
Woods
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
OEM Replacement Motors
(●) Ball Bearing(*) Permanent Split Capacitor Design(~) Double Shafted39
SS336 1/20 1.80115 1550 CWSE2.50” 1/4” x 1.17” 270099012
SS510 ~ 1/50 1.10120 1250 CWLE2.12” 1.19” x 1/4 x 1.53” Humidifier
SS235 1/80 0.90115 1050 CWSE2.35” 1/4” x 1.10” 270099010SS236 1/50 1.00115 1575 CWSE2.10” 1/4” x 1.00” 27009909
3.3”
3.3”
3.3”3.3”
SS506 1/140 0.50115 1400 CCWSE1.87” 1/4” x 2.00” 2N87013.3”
York
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
1/12 1.20 / 0.60230/460 3000 CCWSE6-3/4” 1/4” x 2.25” D1, D2, D3 Roof Top UnitsSS2360 1/15 2.30115 1050 CWSE3.32” 1/2” x 2.80” Unit Heater
3.3”5.0”
UFM653 ●
SS6920 1/15 2.70115 1050 CWSE3.87” 3/8” x 3.55” Unit Heater5.0”SS2615 1/8 4.60115 1050 CWSE3.87” 1/2” x 3.25” Unit Heater5.0”SS2380 * 1/8 2.30115 1075 CWSE4.00” 1/2” x 3.00” Unit Heater5.0”
UFM653 SS2360 - SS6920 - SS2615 SS2380
Woodstove
Stock # HP Amps.Volts RPM Rotation“A” Shaft ReplacesDiameter
SS250
SS250 1/70 0.65120 1500 CWSE3.71” Hubless 7173-0867, 2868-509-0423.3”
www.omnidrive.ca
Split Phase Belt Drive Motors
40(●) Ball Bearing(*) Permanent Split Capacitor Design
• Continuous Duty• Class ‘B’ Insulation• Open Drip-Proof• Single Speed• 40°C Ambient Rating• Single & Dual Voltage• Automatic Overload• 60 Hz.• 1/2” to 5/8” Sleeve & Key Included• Resilient Base has 48 & 56 Frame Mounting Holes• Self Aligning Sleeve & Sealed Ball Bearings
Features:
48 Frame
All Models
Stock # HP Amps.Volts RPM Rotation“A” Shaft Frame
SS933 1/4 4.80115 1725 REV.6.81” 1/2” x 1.50” 48YSS934 1/3 6.60115 1725 REV.6.81” 1/2” x 1.50” 48YSS935 1/2 8.30115 1725 REV.7.76” 1/2” x 1.50” 48YSS934B ● 1/3 6.60115 1725 REV.6.81” 1/2” x 1.50” 48YSS935B ● 1/2 7.60115 1725 REV.6.81” 1/2” x 1.50” 48Y
www.omnidrive.ca
SS933D ● 1/4 4.60/2.20-2.10115/208-230 1725 REV.6.75” 1/2” x 1.88” 48/56SS934D ● 1/3 6.60/3.40-3.10115/208-230 1725 REV.6.75” 1/2” x 1.88” 48/56SS935D ● 1/2 7.60/3.70-3.80115/208-230 1725 REV.8.58” 1/2” x 1.88” 48/56SS936D ● 3/4 11.60/5.90-5.80115/208-230 1725 REV.10.55” 5/8” x 1.88” 56H
575 Volt - Direct Drive Blower Motors48 Frame
• Resilient Rings• P.S.C Design• Extended Thru-Bolts on Shaft End• Single Phase• Open Construction• Sealed Ball Bearings
Features:
AvailableAccessories
POC15-1 - POC25-1
41
Stock # HP Amps. RPM Rotation“A” Shaft Replaces
48 Frame
5BD1106 1 1075 / 2 REV.6.50” 1/2” x 5.00”5.5” F1575DD, 50HJ900575, 88C7601X70671181-017, X70671479-001
5BD1076 3/4 1075 / 2 REV.6.30” 1/2” x 5.00” 5.5” HQ1095096, F34575DD, 21A309661P01 X70671479-010, 024-31946-003
Diameter
1223A - 1364A
Stock # Description
Accessories
1223A1364A
48 Frame (Dia: 5-5/8”) 48 Frame (Dia: 5-5/8”)
Motors
14791495
48 Frame (Dia: 5-5/8”) Bolt Circle: 10”48 Frame (Dia: 5-5/8”) Bolt Circle: 11”
POC25-1POC15-1 15 MFD / 370 VAC - Oval
25 MFD / 370 VAC - Oval
2.40
2.30
Volts
575
575
1479 - 1495
All Models
www.omnidrive.ca
Min B.C.D: 6-7/8” Max B.C.D: 8-1/8” Lug Size: SML. 1-3/4”Min B.C.D: 8-1/8” Max B.C.D: 12-1/8” Lug Size: LRG. 4”
Case Size: 2.90” x 3.60” Fits: 5BD1106Case Size: 2.16” x 3.60” Fits: 5BD1076
42
Flex Mount & Direct Drive Blower Motors
Features:
48 Frame
Stock #
AvailableAccessories
HP Volts RPM “A” Shaft Capacitor
SS3583 1/4 115 1075 / 3 4.00”
SS3585 1/3 115 1075 / 3 4.36”
SS3587 1/2 115 1075 / 3 4.86”
SS3589 3/4 115 1075 / 3 5.36”
SS3584 1/4 208 - 230 1075 / 3 4.00”1/2” x 4.00”
1/2” x 4.00”
1/2” x 4.00”
1/2” x 4.00”
1/2” x 4.00”
SS3586 1/3 208 - 230 1075 / 3 4.36”
SS3588 1/2 208 - 230 1075 / 3 4.86”
1/2” x 4.00”
1/2” x 4.00”
5 / 370
7.5 / 370
10 / 370
15 / 370
5 / 370
5 / 370
10 / 370
SS3590 3/4 208 - 230 1075 / 3 5.36” 1/2” x 4.00” 10 / 370
FLEX50 Flex Mounting Kit for 42 Frame (Dia: 5.0”) 2” Band - 9” & 10” B.C. Mounting Holes Flex Mounting Kit for 48 Frame (Dia: 5-5/8”) 2” Band - 9” & 10” B.C. Mounting Holes FLEX55
FLEX50 - FLEX55
POC5-1 - POC7.5-1POC10-1 - POC15-1
Stock # Description
Motors
Accessories
SS752 × 1/4 115 1075 / 4 4.05”SS753 × 1/3 115 1075 / 4 4.27”SS754 × 1/2 115 1075 / 4 4.82”SS973 × 1/3 208 - 230 1075 / 4 4.27”SS974 × 1/2 208 - 230 1075 / 4 4.82”
1/2” x 6.00”1/2” x 6.00”1/2” x 6.00”1/2” x 6.00”1/2” x 6.00”
5 / 37010 / 37010 / 37010 / 37010 / 370
1223A1364A
48 Frame (Dia: 5-5/8”) Min B.C.D: 6-7/8” Max B.C.D: 8-1/8” Lug Size: SML. 1-3/4”48 Frame (Dia: 5-5/8”) Min B.C.D: 8-1/8” Max B.C.D: 12-1/8” Lug Size: LRG. 4”
1223A - 1364A
POC5-1POC7.5-1POC10-1POC15-1
5 MFD / 370 VAC - Oval7.5 MFD / 370 VAC - Oval10 MFD / 370 VAC - Oval5 MFD / 370 VAC - Oval
Case Size: 2.16” x 2.062” Case Size: 2.16” x 2.812” Case Size: 2.16” x 2.812” Case Size: 2.16” x 3.60”
Rotation
REV.
REV.
REV.
REV.
REV.
REV.
REV.
REV.REV.REV.REV.REV.REV.
Amps.
4.20
5.50
7.50
10.20
2.00
2.80
3.60
5.503.604.808.00
2.30 - 2.503.30 - 4.00
• P.S.C Design• 40°C Ambient Rating• Reversing Plug• Extended Thru-Bolts• Resilient Rings Included• Thermally Protected• Open Construction• Long Life Self Aligning Sleeve Bearings• Motors Noted (×) include 3 Welded Flex Arms
www.omnidrive.ca
Condenser Fan Motors48 Frame
• P.S.C Design• 60°C Ambient Rating• Reversing Plug• Extended Thru-Bolts• Shaft Slinger• Totally Enclosed - Air Over Construction• Sealed Ball Bearings
Features:
43
Stock # HP Volts RPM “A” Shaft Capacitor
AvailableAccessories
SS3727 1/6 208 - 230 1075 3.86”SS3728 1/4 208 - 230 1075 4.11”SS739B 1/4 208 - 230 825 4.25”SS3729 1/3 208 - 230 1075 4.61”SS740B 1/3 208 - 230 825 5.00”
1/2” x 6.00”1/2” x 6.00”1/2” x 6.50”1/2” x 6.00”1/2” x 6.50”
SS3730 1/2 208 - 230 1075 5.11”SS3731 3/4 208 - 230 1075
All Models
5.36”1/2” x 6.00”1/2” x 6.00”
5 / 3705 / 3705 / 3707.5 / 3707.5 / 37010 / 37010 / 370
Motors
48 Frame
POC5-1POC7.5-1POC10-11330A
5 MFD / 370 VAC - Oval7.5 MFD / 370 VAC - Oval10 MFD / 370 VAC - OvalPlastic Rain Shield 1/2” Bore
Stock # Description
Accessories
1223A1364A
Diameter: 48 Frame Min B.C.D: 6-7/8” Max B.C.D: 8-1/8” Lug Size: SML. 1-3/4”Diameter: 48 Frame Min B.C.D: 8-1/8” Max B.C.D: 12-1/8” Lug Size: LRG. 4”
Case Size: 2.16” x 2.062” Case Size: 2.16” x 2.812” Case Size: 2.16” x 2.812”
1223A - 1364A
1330A
POC5-1 - POC7.5-1 POC10-1
Rotation
REV.REV.REV.REV.REV.REV.REV.
Amps.
1.302.001.902.702.103.505.30
www.omnidrive.ca
44
Unit Heater & Exhaust Fan Motors
Features:
48 Frame
Stock # HP Amps. RPM “A” Shaft Capacitor
SS749 1/6 2.40 1075 4.52”SS750 1/4 4.10 1075 4.52”SS751 1/3 5.00 1075 4.52”
1/2” x 4.50”1/2” x 4.50”1/2” x 4.50”
IncludedIncludedIncluded
All Models
• P.S.C Design• Round Body, Includes Resilient Rings• Reversing Plug• Thermally Protected• Totally Enclosed - Air Over Construction• Sealed Ball Bearings
• P.S.C Design• Yoke Mount - Extended Thru-Bolts• 2 Speeds With Pull Chain• 10 Foot Cord & Plug• Thermally Protected• Totally Enclosed - Air Over Construction• Sealed Ball Bearings
Features:
Stock # HP Amps. RPM “A” Shaft Capacitor
All Models
SS486 1/4 3.40 1100 / 2 6.50”SS647 1/3 4.40 1100 / 2 6.90”
1/2” x 3.00”1/2” x 3.00”
IncludedIncluded
Pedestal Fan Air Circulator Motors48 Frame
Rotation
REV.REV.REV.
Rotation
REV.REV.
Volts
115115115
Volts
115115
www.omnidrive.ca
• Rolled Steel Construction• Continuous Duty• Class ‘B’ Insulation• High Efficiency Capacitor Start/Run Design• UL Listed & CSA Approved• Reversible• 40°C Ambient• Removable Rigid Base• Manual Overload• 1.15 S.F.• 60 Hz.• Ball Bearings
Features:
Stock # FrameAmps. “C”
All Models
HP Volts
FD141C 1/3 115 / 208-230 56CFD142C 1/2 115 / 208-230 56CFD143C 3/4 115 / 208-230 56CFD144C 1 115 / 208-230 56CFD145C 1.5 115 / 208-230 56CFD146C 2 115 / 208-230 56CFD147C 3 208-230 56CFD161C 1/3 115 / 208-230 56CFD162C 1/2 115 / 208-230 56CFD163C 3/4 115 / 208-230 56CFD164C 1 115 / 208-230 56CFD165C 1.5 115 / 208-230 56CFD166C 2 115 / 208-230 56HCFD176 2 115 / 208-230 145TFD176C 2 115 / 208-230 145TC
12.00”12.00”12.00”12.00”12.00”13.80”14.60”12.20”12.00”12.00”12.00”
12.60”14.20”14.20”14.20”
4.70 / 2.505.90 / 3.108.10 / 4.208.30 / 4.4014.00 / 7.0016.20 / 8.4013.00-12.304.30 / 2.305.80 / 3.008.10 / 4.209.20 / 5.0013.30 / 7.1016.50 / 9.0016.50 / 8.3016.50 / 8.30
RPM
360036003600360036003600360018001800180018001800180018001800
45
Single Phase Motors - Rolled Steel TEFCGeneral Purpose & Farm Duty
www.omnidrive.ca
Features:
Single Phase Motors - Rolled Steel TEFC General Purpose & Farm Duty
• Continuous Duty• Class ‘B’ Insulation• Capacitor Start/Run• UL Listed & CSA Approved• Reversible• 40°C Ambient• Rigid Base - Dual Mounting Holes• No Overload• Rolled Steel Construction• 1.15 S.F.• 60 Hz.• Ball Bearings All Models
OR547 3OR548 5
12.80”12.80”
18001800
15.75”15.75”
Stock # HP “AG”RPM “C”
• Continuous Duty• Class ‘F’ Insulation• Capacitor Start/Run• UL Listed & CSA Approved• Reversible• ‘C’ Face Kits Available• 40°C Ambient• Rigid Base - Dual Mounting Holes• Rolled Steel Construction• 1.15 S.F.• 60 Hz.• Ball Bearings
Features:
All Models
Stock # HP CommentsRPM “C”
FD177 3FD178 5FD179 7.5
Manual OverloadNo Overload
Manual Overload180018001800
16.70”18.10”20.30”
FD17A 10 No Overload1800 20.30”
13.50 - 11.9022.50 - 20.00
Amps
Amps
14.50 - 12.6022.80 - 20.1033.00 - 30.0042.00 - 38.10
182T184T
Frame
Frame
182T184T213T215T
208 - 230208 - 230
Volts
Volts
208 - 230208 - 230208 - 230208 - 230
FD128 5FD129 7.5FD12A 10
No OverloadNo Overload
Manual Overload360036003600
16.70”16.70”20.30”
23.00 - 20.0031.50 - 29.0043.00 - 39.00
184T213T215T
208 - 230208 - 230208 - 230
FD127 3 Manual Overload3600 16.70”12.40 - 14.00 182T208 - 230
46
Single Phase Motors - Rolled Steel ODPGeneral Purpose
www.omnidrive.ca
Three Phase Motors - Rolled Steel ODP48 Frame
• Continuous Duty• Class ‘B’ Insulation• UL Listed & CSA Approved• 40°C Ambient• Rigid Base• Reversible• Rolled Steel Construction• 1.15 S.F.• Ball Bearings
Features:
47
Stock # HP Amps. RPM “C” Frame
All Models
56 Frame
WD682 1/2 208-230 / 460 11.00”WD662 1/2 575 11.00”WD683 3/4 208-230 / 460 11.00”WD663 3/4 575 11.00”WD684 1 208-230 / 460 11.00”
5656565656
WD664 1 575 11.00”WD685 1.5 208-230 / 460 11.00”WD665 1.5 575 11.00”WD686 2 208-230 / 460 11.00”
56565656
WD666 2 575 11.00” 56
WD661 1/3 575 11.00” 561800180018001800180018001800180018001800
1800
Volts
2.20 / 1.100.87
2.80 / 1.401.12
3.60 / 1.801.40
4.60 / 2.301.80
5.80 / 2.902.30
0.65
www.omnidrive.ca
• Rolled Steel Construction• Continuous Duty• Class ‘F’ Insulation• UL Listed & CSA Approved• 40°C Ambient• Rigid Base• Reversible• Dual Mounting Holes in Base• 1.15 S.F.• Ball Bearings
Features:
Stock # FrameAmps. RPM “C” Efficiency
All Models
48
Three Phase Motors - Rolled Steel ODPNEMA Premium
ORP654 1 11.60”ORP675 1.5 11.60”ORP655 1.5 11.60”ORP676 2 11.60”ORP656 2 11.60”
85.5%86.5%86.5%86.5%86.5%
ORP677 3 13.80”ORP657 3 13.80”ORP678 5 13.80”ORP658 5 13.80”
89.5%89.5%89.5%89.5%
7.5 16.90” 91.0%
ORP674 1 11.60” 85.5%
ORP659 7.5 16.90”ORP67A 10 16.90”ORP65A 10 16.90”ORP65B 15 19.75”
91.0%91.7%91.7%93.0%
20 19.75” 93.0%ORP65C
ORP679
143T145T145T145T145T182T182T184T184T213T
143T
213T215T215T254T
256T
1800180018001800180018001800180018001800
1800
1800180018001800
1800
HP Volts
1.404.50 / 2.20
1.805.90 / 2.90
2.308.00 / 4.00
3.3013.20 / 6.60
5.4019.00 / 9.50
3.20 / 1.60
7.8025.00 / 12.50
10.5014.9019.70
575208-230 / 460
575208-230 / 460
575208-230 / 460
575208-230 / 460
575208-230 / 460
208-230 / 460
575208-230 / 460
575575
575
www.omnidrive.ca
Stock # HP Amps. RPM “C” FrameShaft (Dia.)Volts
49
Three Phase Motors - Aluminum Frame TEFC56 & 56HZ Frame
www.omnidrive.ca
• Aluminum Construction• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings
Features:
WA631 1/3 12.67”36001.26 - 1.14 / 0.57208-230 / 460 5/8” 56 WA611 1/3 12.67”36000.46575 5/8” 56
WA632 1/2 12.67”36001.82 - 1.64 / 0.82208-230 / 460 5/8” 56WA612 1/2 12.67”36000.66575 5/8” 56
WA633 3/4 12.67”36002.59 - 2.34 / 1.17208-230 / 460 5/8” 56WA613 3/4 12.67”
WA614 1 13.66”
TA604 1 14.02”
WA634 1 13.66”
TA624 1 14.02”
3600
3600
3600
3600
3600
0.94
1.17
1.17
3.24 - 2.92 / 1.46
3.24 - 2.92 / 1.46
575
575
575
208-230 / 460
208-230 / 460
5/8”
5/8”
7/8”
5/8”
7/8”
56
56H
56HZ
56H
56HZ
WA683 3/4 12.67”WA663 3/4 12.67”
18001800
2.94 - 2.66 / 1.331.06
208-230 / 460575
5/8”5/8”
5656
WA661 1/3 12.67”WA681 1/3 12.67”
18001800
0.521.43 - 1.30 / 0.65
575208-230 / 460
5/8”5/8”
5656
WA662 1/2 12.67”WA682 1/2 12.67”
18001800
0.772.12 - 1.92 / 0.96
575208-230 / 460
5/8”5/8”
5656
WA664 1 13.66”18001.39575WA684 1 13.66”18003.84 - 3.48 / 1.74208-230 / 460
5/8”5/8”
56H56H
TA654 1 14.02”18001.39575TA674 1 14.02”18003.84 - 3.48 / 1.74208-230 / 460
7/8”7/8”
56HZ56HZ
• Aluminum Construction• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings
Features:
Three Phase Motors - Aluminum Frame TEFC56 & 56HZ Frame
50www.omnidrive.ca
Stock # HP Amps. RPM “C” FrameShaft (Dia.)Volts
TA655 1-1/2 18001.91575TA675 1-1/2 18005.28 - 4.78 / 2.39208-230/460
7/8”7/8”
56HZ56HZ
14.02”14.02”
WA666 2
TA656 2
WA686 21800
1800
18002.43
2.43
6.73 - 6.08 / 3.04575
575
208-230/460
TA676 2 18006.73 - 6.08 / 3.04208-230/460
5/8”
7/8”
5/8”
7/8”
56H
56HZ
56H
56HZ
13.66”
14.02”
13.66”
14.02”
TA605 1-1/2TA625 1-1/2
36003600
1.704.71 - 4.26 / 2.13
575208-230/460
7/8”7/8”
56HZ56HZ
14.02”14.02”
WA616 2WA636 2
36003600
2.186.02 - 5.44 / 2.72
575208-230/460
5/8”5/8”
56H56H
13.66”13.66”
TA606 2 36002.18575TA626 2 36006.02 - 5.44 / 2.72208-230/460
7/8”7/8”
56HZ56HZ
14.02”14.02”
WA617 3
WA637 336003600
3.178.76 - 7.92 / 3.96
575208-230/460
5/8”5/8”
56H56H
13.66”13.66”
TA607 3 36003.17575TA627 3 36008.70 - 7.96 / 3.96208-230/460
7/8”7/8”
56HZ56HZ
14.02”14.02”
WA615 1-1/2WA635 1-1/2
36003600
1.704.71 - 4.26 / 2.13
575208-230/460 5/8”
5/8”56H56H13.66”
13.66”
WA665 1-1/2 18001.91575WA685 1-1/2 18005.28 - 4.78 / 2.39208-230/460
5/8”5/8”
56H56H
13.66”13.66”
51 www.omnidrive.ca
• Aluminum Construction• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings
Features:
Three Phase Motors - Aluminum Frame TEFC56C & 56HCZ Frame
Stock # HP Amps. RPM “C” FrameShaft (Dia.)Volts
WA631C 1/3 12.67”36001.26 - 1.14 / 0.57208-230 / 460 5/8” 56C WA611C 1/3 12.67”36000.46575 5/8” 56C
WA632C 1/2 12.67”36001.82 - 1.64 / 0.82208-230 / 460 5/8” 56CWA612C 1/2 12.67”36000.66575 5/8” 56C
WA633C 3/4 12.67”36002.59 - 2.34 / 1.17208-230 / 460 5/8” 56CWA613C 3/4 12.67”
WA614C 1 13.66”
TA604C 1 14.02”
WA634C 1 13.66”
TA624C 1 14.02”
3600
3600
3600
3600
3600
0.94
1.17
1.17
3.24 - 2.92 / 1.46
3.24 - 2.92 / 1.46
575
575
575
208-230 / 460
208-230 / 460
5/8”
5/8”
7/8”
5/8”
7/8”
56C
56HC
56HCZ
56HC
56HCZ
WA661C 1/3 12.67”WA681C 1/3 12.67”
18001800
0.521.43 - 1.30 / 0.65
575208-230 / 460
5/8”5/8”
56C56C
WA662C 1/2 12.67”WA682C 1/2 12.67”
18001800
0.772.12 - 1.92 / 0.96
575208-230 / 460
5/8”5/8”
56C56C
WA683C 3/4 12.67”WA663C 3/4 12.67”
18001800
2.94 - 2.66 / 1.331.06
208-230 / 460575
5/8”5/8”
56C56C
WA664C 1 13.66”18001.39575WA684C 1 13.66”18003.84 - 3.48 / 1.74208-230 / 460
5/8”5/8”
56HC56HC
TA654C 1 14.02”18001.39575TA674C 1 14.02”18003.84 - 3.48 / 1.74208-230 / 460
7/8”7/8”
56HCZ56HCZ
Three Phase Motors - Aluminum Frame TEFC56C & 56HCZ Frame
• Aluminum Construction• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings
Features:
52www.omnidrive.ca
Stock # HP Amps. RPM “C” FrameShaft (Dia.)Volts
WA665C 1-1/2 18001.91575WA685C 1-1/2 18005.28 - 4.78 / 2.39208-230/460
5/8”5/8”
56HC56HC
13.66”13.66”
TA655C 1-1/2 18001.91575TA675C 1-1/2 18005.28 - 4.78 / 2.39208-230/460
7/8”7/8”
56HCZ56HCZ
14.02”14.02”
WA666C 2
TA656C 2
WA686C 21800
1800
18002.43
2.43
6.73 - 6.08 / 3.04575
575
208-230/460
TA676C 2 18006.73 - 6.08 / 3.04208-230/460
5/8”
7/8”
5/8”
7/8”
56HC
56HCZ
56HC
56HCZ
13.66”
14.02”
13.66”
14.02”
WA615C 1-1/2WA635C 1-1/2
36003600
1.704.71 - 4.26 / 2.13
575208-230/460 5/8”
5/8”56HC56HC13.66”
13.66”
TA605C 1-1/2TA625C 1-1/2
36003600
1.704.71 - 4.26 / 2.13
575208-230/460
7/8”7/8”
56HCZ56HCZ
14.02”14.02”
WA616C 2WA636C 2
36003600
2.186.02 - 5.44 / 2.72
575208-230/460
5/8”5/8”
56HC56HC
13.66”13.66”
TA606C 2 36002.18575TA626C 2 36006.02 - 5.44 / 2.72208-230/460
7/8”7/8”
56HCZ56HCZ
14.02”14.02”
WA617C 3
WA637C 336003600
3.178.76 - 7.92 / 3.96
575208-230/460
5/8”5/8”
56HC56HC
13.66”13.66”
TA607C 3 36003.17575TA627C 3 36008.70 - 7.96 / 3.96208-230/460
7/8”7/8”
56HCZ56HCZ
14.02”14.02”
• Rolled Steel Construction• Continuous Duty• Class ‘B’ Insulation• UL Listed & CSA Approved• Reversible• 40°C Ambient• Rigid Base• Removable Bolt-on Base• 1.15 S.F.• Ball Bearings
Features:
Stock # HP Amps. RPM “C” Frame
All Models
WE661C 1/3 12.60”WE612C 1/2 12.60”WE682C 1/2 12.60”WE662C 1/2 12.60”WE613C 3/4 12.60”
56C56C56C56C56C
WE683C 3/4 12.60”WE663C 3/4 12.60”WE614C 1 12.60”WE684C 1 12.60”
56C56C56C56C
WE615C 1.5 12.60”WE685C 1.5 12.60”WE665C 1.5 12.60”WE616C 2 12.60”
56C56C56C56C
WE686C 2 12.60”WE666C 2 12.60”
WE664C 1 12.60”
56C56C
56C
WE681C 1/3 12.60” 56C180036001800180036001800180036001800
360018001800360018001800
1800
1770
Volts
0.650.82
2.20 / 1.100.880.90
2.80 / 1.401.001.30
3.40 / 1.70
1.804.60 / 2.30
1.822.10
5.80 / 2.902.40
1.40
1.62 / 0.82575575
208-230 / 460575575
208-230 / 460575575
208-230 / 460
575208-230 / 460
575575
208-230 / 460575
575
208-230 / 460
WE617C 3 13.00” 56C36003.10575
53
Three Phase Motors - Rolled Steel TEFC56C Frame
www.omnidrive.ca
TRP605
TRP67A
• Rolled Steel Construction• Continuous Duty• Class ‘F’ Insulation• UL Listed & CSA Approved• Reversible• 40°C Ambient• Rigid Base• Dual Mounting Holes in Base• 1.15 S.F.• Ball Bearings
Features:
Stock # HP Amps. RPM “C” Efficiency
All Models
TRP654 1 1800575 143T13.00”TRP704 1 1200575 143T13.00”
1.5 3600575 143T13.00”TRP675 1.5 1800208-230 / 460 145T13.00”TRP655 1.5 1800575 145T13.00”
85.5%87.5%84.0%86.5%86.5%
TRP705 1.5 1200575 182T15.70”TRP606 2 3600575 145T13.25”TRP676 2 1800208-230 / 460 145T13.00”TRP656 2 1800575 145T13.00”
87.5%85.5%86.5%86.5%
TRP607 3 3600575 182T13.00”TRP677 3 1800208-230 / 460 182T15.70”TRP657 3 1800575 182T15.70”TRP707 3 1200575 213T19.20”
86.5%89.5%89.5%89.5%
TRP608 5 3600575 184T15.70”TRP678 5 1800208-230 / 460 184T15.82”
TRP706 2 1200575 184T15.50”
88.5%89.5%
88.5%
TRP674 1 1800208-230 / 460 143T13.00” 85.5%
TRP658 5 1800575 184T15.70” 89.5%
TRP609 7.5 3600575 213T19.20”TRP679 7.5 1800208-230 / 460 213T18.72”TRP659 7.5 1800575 213T19.20”TRP60A 10 3600575 215T19.20”
89.5%91.7%91.7%90.2%
10 18001800
208-230 / 460 215T19.20”TRP65A 10 575 215T19.20”
TRP708 5 1200575 215T19.20”
91.7%91.7%
89.5%
FrameVolts
1.301.401.68
4.80 / 2.401.802.022.10
6.00 / 3.002.40
2.1019.20 / 9.60
3.403.925.00
12.40 / 6.20
2.64
3.00 / 1.50
5.20
7.4019.20 / 9.60
8.009.60
19.20 / 9.6010.40
6.00
54
Three Phase Motors - Rolled Steel TEFCNEMA Premium
www.omnidrive.ca
• Cast Iron Construction• Solid Full Frame Length Mounting Feet• Dual Mounting Holes• Cast Iron Gasketed Conduit Box• Stainless Steel Nameplate• Double Lip Seal on Both Ends• Class ‘F’ Insulation - Class ‘B’ Temp. Rise• NEMA MG 1, EEMAC M1-6, CSA C390• Double Sealed ‘ZZ’ Bearings up to 215T• Standard (Non-Metric) Hardware• F-2 Field Convertible• Conduit Box Can be Rotated 90 Degrees• Ground Lug in Conduit Box• Rust Preventative Treated Steel Fan Cover• VPI Insulation System• ‘C’ Face Kits Available• Regreasable Bearings 254T & Larger• Inverter Duty 20:1 V.T. / 10:1 C.T.• Oversized Ball Bearings
Features:
Stock # Amps. “C” C Face KitEfficiency
All Models
HP
Three Year Warranty
TCP657 3 15.25”TCP658 5 16.00”TCP659 7.5 19.00”TCP65A 10 22.50”TCP65B 15 23.38”
87.5%87.5%89.5%89.5%91.0%
CFP18CFP18CFP21CFP21CFP25
TCP65C 20 25.13”TCP65D 25 28.00”TCP65E 30 29.50”TCP65F 40 30.25”
91.0%92.4%92.4%93.0%
CFP25CFP28CFP28CFP32
TCP65H 60 33.70”TCP65I 75 37.10”TCP65J 100 38.00”TCP65K 125 45.10”
95.0%95.4%95.4%95.4%
CFP36CFP36CFP40CFP44
TCP65L 150 45.10”TCP65M 200 53.60”
TCP65G 50 31.75”
95.8%96.2%
93.0%
CFP44CFP44
CFP32
Volts
3.105.207.5010.0014.9019.6023.6028.3037.00
53.6066.6090.00109.00130.00172.00
46.30
575575575575575575575575575
575575575575575575
575
180018001800180018001800180018001800
180018001800180018001800
1800
RPM
Three Phase Motors - Cast Iron TEFC48 Frame
55
NEMA Premium
www.omnidrive.ca
Frame
182T184T213T215T254T256T284T286T324T
364T365T405T444T445T447T
326T
• Mounting Bracket• Open Drip-Proof• 1800 RPM• Thermally Protected• Replacements for OEM Motors such as Armstrong, Bell & Gossett & Taco• Permanently Sealed Ball Bearings
Type ‘2A’ 4.67” B.C.D. fits # 2 Bearing Assembly Type ‘2B’ 5.00” B.C.D. fits # 3 & 4 Bearing Assembly Type ‘2C’ 5.875” B.C.D. fits # 5, 6 & 7 Bearing Assembly
Features:
Notes:
Stock # HP Volts Amps. RotationType ReplacesBearing
SS1459 1/2 115-208 / 230 5.70 / 3.00 - 2.90 2C REV.
SS1462 3/4 115-208 / 230 8.20 / 4.70 - 4.20 2C REV.
SS1352 1/6 115 3.80 2B CWSE
SS1350 1/12 115 2.50 2A CWSE
R1459, 811757-001, 111044
R1462, 811757-002, 033, 111047
R1352, 817025-001, 831001-061, 111031
R1350, 805316-010, 831000-61, 111034
SS1355 1/6 115 3.80 2A CWSE ----
SS1444 1/4 115 4.60 2C CCWSE
SS1446 1/3 115 6.00 2C CCWSE
R1444, 816141-001
R1446, 816141-002
SS1354 1/4 115 4.60 2B CWSE R1354, 817025-007, 831002-061, 111040
Ball
Ball
Ball
Ball
Ball
Ball
Ball
Ball
Type 2A & 2B
Type 2CType 2C
SS1356 1/3 115 6.00 2B CWSE R1356, 817025-013, 831003-061, 111042Ball
Single Phase Motors - ODP
56
Circulator Motors
www.omnidrive.ca
• 56J Threaded Shaft• Aluminum Construction• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings
Features:
Stock # HP Amps. RPM “C” Frame
WA612J 1/2
WA613J 3/4
WA614J 1
WA615J 1-1/2
WA636J 2
WA637J 3
WA611J 1/3
3600
3600
3600
36003600
3600
3600
Volts
575
575
575
575208-230 / 460
208-230 / 460
575
57
Three Phase Motors - Aluminum Frame TEFCJet Pump Motors
www.omnidrive.ca
All Models
0.46
0.66
0.94
1.17
1.706.02 - 5.44 / 2.72
8.76 - 7.92 / 3.96
13.19”
13.19”
13.19”
14.17”
14.17”14.17”
14.17”
56J
56J
56J
56HJ
56HJ56HJ
56HJ
WA631J 1/3 3600208-230 / 460 1.26 - 1.14 / 0.57 13.19” 56J
WA632J 1/2 3600208-230 / 460 1.82 - 1.64 / 0.82 13.19” 56J
WA633J 3/4 3600208-230 / 460 2.59 - 2.34 / 1.17 13.19” 56J
WA634J 1 3600208-230 / 460 3.24 - 2.92 / 1.46 14.17” 56HJ
WA635J 1-1/2 3600208-230 / 460 4.71 - 4.26 / 2.13 14.17” 56HJ
WA616J 2 3600575 2.18 14.17” 56HJ
WA617J 3 3600575 3.17 14.17” 56HJ
58www.omnidrive.ca
Three Phase Motors - Rolled Steel ODP & TEFC
• Rigid Base - Dual Mounting Holes• Rolled Steel Construction• Class ‘F’ Insulation• Reversible• UL Listed & CSA Approved• 40°C Ambient• 1.15 S.F.• Ball Bearings
Features:
Stock # HP Amps. RPM “C” Enclosure
TEFC ODP
Close Coupled Motors
JM607 3 3600575 18.10”JM657 3 1800575 18.10”JM608 5 3600575 18.10”JM658 5 1800575 18.10”JM629 7.5 3600575 18.50”
TEFCTEFCTEFCTEFCODP
JM659 7.5 1800575 21.50”JM60A 10 3600575 20.00”JM65A 10 1800575 21.50”
TEFCTEFCTEFC
JM627 3 3600575 14.40” ODPJM617 3 3600575 15.75” TEFC
Volts
3.003.204.705.207.107.309.4410.00
3.203.10
Frame
182JM182JM184JM184JM184JM213JM215JM215JM
145JM145JM
DC Motors - TEFC & TENV Construction
59 www.omnidrive.ca
• Continuous Duty• Class ‘F’ Insulation• UL Listed & CSA Approved• Reversible• 40°C Ambient• 1725 RPM• 56C or 143/5TC Frame• Removable Rigid Base• TENV (Type A)• TEFC (Type B)• 20:1 C.T. Speed Range• Ball Bearings
Features:
Stock #
Permanent Magnet
Type A Type B
DC500 1/4 10.25” TENV Brush Number BR56 DC501 1/3 10.25” TENV Brush Number BR56 DC502 1/2 12.25” TEFC Brush Number BR56
DC503 3/4 13.75” TEFC Brush Number BR56 DC504 1 14.75” TEFC Brush Number BR56 DC511 1/3 10.25” TENV Brush Number BR56 DC512 1/2 12.25” TEFC Brush Number BR56 DC513 3/4 13.75” TEFC Brush Number BR56 DC514 1 14.75” TEFC Brush Number BR56 DC515 1.5 15.50” TEFC Brush Number BR140 DC516 2 18.75” TEFC Brush Number BR140 DC517 3 19.25” TEFC Brush Number BR140
AABBBABBBBBB
HP “C” Enclosure CommentsType
2.603.505.007.6010.001.702.503.805.008.009.5014.00
Amps.
9090909090180180180180180180180
Volts
56C56C56C56C56C56C56C56C56C145TC145TC145TC
Frame
60www.omnidrive.ca
Features:
Stock # HP Amps.RPM Enclosure
TENV
MS613C 3/4 TENVMS614C 1 TEFCMS605C 1.5 TEFCMS606C 2 TEFCMS607C 3 TEFCMS608C 5 TEFCMS609C 7.5 TEFCMS60AC 10 TEFCMS661C 1/3 TENV
MS663C 3/4 TENVMS664C 1 TEFCMS665C 1.5 TEFCMS655C 1.5 TEFCMS666C 2 TEFCMS656C 2 TEFC
MS662C 1/2 TENV
MS612C 1/2 TENV360036003600360036003600360036001800
180018001800180018001800
1800
3600
Volts
0.840.961.661.923.004.807.709.860.46
0.861.141.641.642.092.09
0.57
0.56575575575575575575575575575
575575575575575575
575
575
MS657C 3 TEFC1800 3.04575MS658C 5 TEFCMS659C 7.5 TEFCMS65AC 10 TEFCMS702C 1/2 TENVMS703C 3/4 TENV
18001800180012001200
5.208.5010.630.221.04
575575575575575
MS704C 1 TEFC
Efficiency
81.8%83.2%84.2%85.0%85.5%87.5%88.5%89.5%82.7%
83.2%85.4%84.0%84.0%85.0%85.0%
83.0%
78.3%
87.5%87.5%89.5%89.5%79.1%82.9%85.1%1200 1.52
“C”
10.00”12-3/8”13.00”13-1/2”18-5/16”19.00”20-3/16”21-3/8”10-1/2”
10.00”12-1/2”13-1/8”13.00”
13-3/4”13-3/4”
10.00”
9-7/8”
18-1/2”18-7/8”19-3/8”21-7/8”10-3/8”10-3/8”12-3/4”575
TEFC
Three Phase Motors - TEFC & TENVStainless Steel
• 304 Stainless Steel• Class ‘F’ Insulation• Double Lipped Seals on Both Ends• Standardized Bearing Cap• C-Face as a Standard • Engraved Name Plate• Totally Enclosed, Fan Cooled (TEFC)• Totally Enclosed, Non-Ventilated (TENV)• Oversized Ball Bearings on Both Ends• Reversible• High Efficiency• VPI, Dip and Bake• 1.15 S.F.
Frame
56C
56C143TC145TC182TC184TC213TC215TC56C
56C56C56C145TC
56C145TC
56C
56C
182TC
184TC213TC215TC56C56C143TC
61 www.omnidrive.ca
WGR063WGR050
Right Angle Speed Reducer
Features:
Worm Gear
Right Hand Single
Left Hand Single
Stock # Description
Technical Speci�cations
Accessories
Double Shafts
WGR050-S1, WGR063-S1WGR050-S2, WGR063-S2WGR050-OFWGR063-OF
Single ShaftsDouble ShaftsOutput Flange - Size 50Output Flange - Size 63
• Hardened Worm Shaft• NEMA 56C Face Input • Double-Lip Oil Seals• Two Bearings on Input Shaft• O-Rings on Input & Output Covers• Worm Reducer Ratings at 1750 RPM Input• Aluminum Alloy Housing with Heat Sink Design • Standard Hollow Shaft Output Shaft Design • Permanently Sealed with Synthetic Lubrication
Output Flange (Size 50)
Output Flange (Size 63)
Stock # 5 7.5 10 15 20 25Ratio: 30 40 50 60 80 100
--- 117
WGR050549
350 1173.43 1.48
655
--- 2.761239
WGR063---
OUTPUT RPM
O/P TORQUE in-lbs
OUTPUT RPM
MAX. INPUT HP
MAX. INPUT HP
O/P TORQUE in-lbs
1752.06
2332.64
6376281753.67
2334.77
11501133
581.771416
441.271283
351.011194
290.861150
220.661079
180.571044
580.96743
440.70672
350.57646
882.051194
881.14646
290.47602
220.38575
180.28487
701.641150
700.90619
62www.omnidrive.ca
NEMA Transition Motor Bases
Part Number
Former NEMA ANew
NEMAO.A. Height B C D E F G H K L M N P
182T 5-1/2
184T213T 8-1/4
1814T143T
143T 4-1/2145T 4-1/2
184T 5-1/22118T182T
215T 8-1/4
1-3/81-3/8
3/43/4
1-3/81-3/8
3/43/4
1-1/21-1/2
11
1-1/21-1/2
11
1-3/41-3/4
11
1-3/41-3/4
11
22
11
22
11
2-1/42-1/4
11
2-1/42-1/4
11
4-3/84-3/8
22
4-3/84-3/8
22
1-1/81-1/8
11
145T
7
5-1/2
7
5-1/2
5-1/2
5
5-1/2
7
4-1/2
5-1/2
4
4
4-1/2
5
254T
286T 10-1/232U28T284T
254T 9-1/2
213T25U21T
215T
28U25T
256T284T 10-1/2
286T
256T 9-1/211
12
1010
1-1/81-1/8
1-1/41-1/41-1/41-1/4
1/21/21/21/2
3/43/43/43/4
2-1/22-1/22-1/22-1/2
14-1/214-1/214-1/214-1/2
5-1/25-1/25-1/25-1/2
9/169/169/169/16
1/2-131/2-131/2-131/2-13
1-1/21-1/21-1/21-1/2
3/43/43/43/4
3/43/43/43/4
3333
16161616
6-1/46-1/46-1/46-1/4
11/1611/1611/1611/16
1/2-131/2-131/2-131/2-13
1-3/41-3/41-3/41-3/4
3/43/43/43/4
3/43/43/43/4
3-1/23-1/23-1/23-1/2
16-3/416-3/416-3/416-3/4
7777
11/1611/1611/1611/16
5/8-115/8-115/8-115/8-11
2222
1111
1-1/41-1/41-1/41-1/4
4444
18-3/418-3/418-3/418-3/4
8888
13/1613/1613/1613/16
5/8-115/8-115/8-115/8-11
2-1/42-1/42-1/42-1/4
1111
1-1/41-1/41-1/41-1/4
4444
22222222
9999
13/1613/1613/1613/16
3/4-103/4-103/4-103/4-10
2-1/82-1/82-1/82-1/8
2222
1111
4-3/44-3/44-3/44-3/4
24242424
9999
13/1613/1613/1613/16
5/8-115/8-115/8-115/8-11
1111
3/43/43/43/4
11
1/21/2
11
1/21/2
11
11
3/43/4
11
3/43/4
11
12
11
7
10
11
8-1/4
9-1/2
8-1/4
5-1/2
9-1/2
10
364T 12-1/4
365T404T 14-1/2
36U32T324T
324T 11-1/4326T 11-1/4
365T 12-1/440U36T364T
44U40T 405T 14-1/2
326T
13-3/4
12-1/4
13-3/4
12-1/4
12-1/4
12
12-1/4
13-3/4
11-1/4
12-1/4
10-1/2
10-1/2
11-1/4
12
404T
44U36T 365T 14-1/2364T
405T364T 14-1/2
365T
16-1/2
16-1/2
16-1/2
12-1/4
13-3/4
12-1/4
12-1/4
11-1/416-1/2
11-1/4
213
215254U
184
182182
213
215
253U
184
286U
324U326U
284
256U256U
286U324U
326U
284U
404U
405U444U
365U
364U364U
404U405U
444U
365U
445U
444U445U
445U444U
445U
All Models
Dimensions are in inches
3/43/43/43/4
2-1/22-1/22-1/22-1/2
13131313
5555
9/169/169/169/16
3/8-163/8-163/8-163/8-16
1111
1/21/21/21/2
5/85/85/85/8
1-7/81-7/81-7/81-7/8
9-1/29-1/29-1/29-1/2
4-1/44-1/44-1/44-1/4
7/167/167/167/16
3/8-163/8-163/8-163/8-16
3/43/43/43/4
1111
1/21/21/21/2
2-1/42-1/42-1/42-1/4
7-1/27-1/27-1/27-1/2
3-3/43-3/43-3/43-3/4
7/167/167/167/16
5/16-185/16-185/16-185/16-18
63 www.omnidrive.ca
• Bases Noted (×) are also Available In Standard Stock Double Adjusting Style• Adjusting Bolts on Double Adjusting Style Bases are in Line ‘D Bolts’ on ‘F’ Dimension• Made in USA
Notes:
Frame& Part Number AL AM AX FBB AOE
SASB215T ×SASB213T ×SASB184T × SASB182T ×SASB145T ×SASB143T ×SASB66SASB56
All Models
AR AU BT DBoltAT AY
BoltXC Wgt.(lbs)
10-5/8 6-1/2 1-1/8 12 8-1/2 1-1/8 10-1/2 7-1/2 1-1/8 10-1/2 8-1/2 1-1/8 12-3/4 9-1/2 1-1/2 12-3/4 10-1/2 1-1/2 15 11 1-3/4 15 12-1/2 1-3/4
4-1/2 2-7/16 1-1/2 6-1/2 3-1/8 2-1/2 5-1/2 2-3/4 2 6-1/2 2-3/4 2-1/2 6-1/2 3-3/4 2-1/4 7-1/2 3-3/4 2-3/4 7-1/2 4-1/4 2-3/4 9 4-1/4 3-1/2
3-13/16 2-7/8 3/8 4-1/2 3-7/8 3/8 3-3/4 3-3/8 3/8 3-3/4 3-7/8 3/8 4-1/2 4-1/4 1/2 4-1/2 4-3/4 1/2 5-1/4 4-3/4 1/2 5-1/4 5-1/2 1/2
3 0.078 7/8 3 0.078 7/8 3 0.119 13/16 3 0.119 13/16 3 0.134 1-1/2 3 0.134 1-1/2 3-1/2 0.164 1-1/2 3-1/2 0.164 1-1/2
5/16x1 3/8x45/16x1 3/8x45/16x1 3/8x45/16x1 3/8x43/8x1-3/4 1/2x63/8x1-3/4 1/2x63/8x1-3/4 1/2x63/8x1-3/4 1/2x6
345699-1/213-1/215-1/2
Single Adjusting Bolt NEMA Adjustable Motor Bases
64www.omnidrive.ca
Frame& Part Number AL AM AX FBB AOE
All Models
AR AU BT DBoltAT AY
BoltXC Wgt.(lbs)
DASB286TDASB284TDASB256TDASB254TDASB215TDASB213TDASB184TDASB182T
DASB445TDASB444TDASB405TDASB404TDASB365T ×DASB364T × DASB326T ×DASB324T ×
DASB449TDASB447T
12-3/4 9-1/2 1-1/2 12-3/4 10-1/2 1-1/2 15 11 1-3/4 15 12-1/2 1-3/4 17-3/4 15-1/8 2 17-3/4 16-7/8 2 19-3/4 16-7/8 2 19-3/4 18-3/8 2
6-1/2 3-3/4 2-1/4 7-1/2 3-3/4 2-3/4 7-1/2 4-1/4 2-3/4 9 4-1/4 3-1/2 10-3/4 5 4-1/8 12-1/2 5 5 12-1/2 5-1/2 4-3/4 14 5-1/2 5-1/2
4-1/2 4-1/4 1/3x9/16 4-1/2 4-3/4 1/3x9/16 5-1/4 4-3/4 1/2x9/16 5-1/4 5-1/2 1/2x9/16 6-1/4 6-5/8 5/8 6-1/4 7-1/2 5/8 7 7-1/2 5/8 7 8-1/4 5/8
3 0.134 1-1/2 3 0.134 1-1/2 3-1/2 0.164 1-1/2 3-1/2 0.164 1-1/2 4 3/16 1-3/8 4 3/16 1-3/8 4-1/2 3/16 1-5/8 4-1/2 3/16 1-5/8
--- ------ ------ ------ ---
1/2x1-3/4 5/8x91/2x1-3/4 5/8x91/2x2 5/8x91/2x2 5/8x9
910141617182122
22-3/4 19-1/4 2-1/2 22-3/4 20-3/4 2-1/2 25-1/2 20-1/2 2-1/2 25-1/2 21-1/2 2-1/2 28-3/4 22-3/8 3 28-3/4 23-7/8 3 31-1/4 24-5/8 3 31-1/4 26-5/8 3
14 6-1/4 5-1/4 15-1/2 6-1/4 6 15-1/2 7 5-5/8 16-1/2 7 6-1/8 16-1/2 8 6-1/8 18 8 6-7/8 19-1/4 9 7-1/4 21-1/4 9 8-1/4
8 8-1/2 3/4 8 9-1/4 3/4 9 9-1/8 3/4 9 9-5/8 3/4 10 9-7/8 7/8 10 10-5/8 7/8 11 11 7/8 11 12 7/8
5-1/4 3/16 2-1/8 5-1/4 3/16 2-1/8 6 1/4 2 6 1/4 2 7 1/4 2-9/16 7 1/4 2-9/16 7-1/2 5/16 2-1/2 7-1/2 5/16 2-1/2
5/8x2-1/2 3/4x95/8x2-1/2 3/4x95/8x2-1/2 3/4x115/8x2-1/2 3/4x113/4x3 3/4x143/4x3 3/4x143/4x3 3/4x143/4x3 3/4x14
3031454655567475
31-1/4 30-1/8 3 31-1/4 35-1/8 3
24-3/4 9 10 29-3/4 9 12-1/2
11 13-3/4 7/8 11 16-1/4 7/8
7-1/2 5/16 2-1/2 7-1/2 5/16 2-1/2
3/4x3 3/4x143/4x3 3/4x14
8995
• Bases Noted (×) are also Available with Gussets for Additional Strength; add the Letter “G” after the Part Number. Example: “DASB324T-G”• Made in USA
Notes:
NEMA Adjustable Motor BasesDouble Adjusting Bolt
1495 411479 41
11811 3812026 3812027 11, 38
16230 1956342 34
56343 3456344 3456345 3456346 3456347 11, 3456348 3460024 3460030 3560076 3563699 3563745 3563746 3563747 3563748 3563749 3563750 3563751 3563752 3563821 3587219 36131410 8, 36148053 8, 36148055 8, 3630080058 1930080135 1999080481 1999080482 1999080483 1999080484 1999080485 1999080486 1999080487 1999080488 19
1223A 41, 42, 431330A 431364A 41, 42, 431814T 582118T 5825U21T 5828U25T 5832U28T 58
‡‡
‡‡
‡
‡‡‡‡‡‡‡
‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡‡‡‡
36U32T 5840U36T 5844U36T 5844U40T 585BD1076 29, 415BD1106 20, 41950-1020 37950-1021 37950-1022 37A2000 17BF101 4BF102 4BF51 4BF52 4BF61 4BF62 4BFC24 4BFC36 4C06E2A 31C07E4A 31C09E4A 31DASB182T 64DASB184T 64DASB213T 64DASB215T 64DASB254T 64DASB256T 64DASB284T 64DASB286T 64DASB324T 64DASB326T 64DASB364T 64DASB365T 64DASB404T 64DASB405T 64DASB444T 64DASB445T 64DASB447T 64DASB449T 64DC500 59DC501 59DC502 59DC503 59DC504 59DC511 59DC512 59DC513 59
65 www.omnidrive.ca
DC514 59 JM608 58
Stock # Page Stock # Page Stock # Page
Index - Stock Number to Page
DC515 59DC516 59DC517 59E004 21, 34E015 29ECR161 6ECR501 6ECR502 6F006 21F026 34F062 15, 28FD127 46FD128 46FD129 46FD12A 46FD141C 45FD142C 45FD143C 45FD144C 45FD145C 45FD146C 45FD147C 45FD161C 45FD162C 45FD163C 45FD164C 45FD165C 45FD166C 45FD176 45FD176C 45FD177 46FD178 46FD179 46FD17A 46FG10 4FG5 4FG6 4FLEX50 42FLEX55 42G004 29G018 15, 21G156 31HD60FE575 20J011 16, 21J020 31J055 28, 29JM607 58
‡‡
‡‡‡
‡‡
‡‡‡
‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡
‡
‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡
‡
‡‡
(‡) New Product
66www.omnidrive.ca
Stock # Stock # Stock #
Index - Stock Number to Page
Page Page Page
JM60A 58JM617 58JM627 58JM629 58JM657 58JM658 58JM659 58JM65A 58MA1074 20, 35MO-019 34MO-020 34MO-022 34MS605C 60MS606C 60MS607C 60
MS608C 60
MS609C 60MS60AC 60MS612C 60MS613C 60MS614C 60MS655C 60MS656C 60MS657C 60MS658C 60MS659C 60MS65AC 60MS661C 60MS662C 60MS663C 60MS664C 60MS665C 60MS666C 60MS702C 60
MS703C 60MS704C 60OR547 46OR548 46ORP654 48ORP655 48ORP656 48ORP657 48ORP658 48ORP659 48ORP65A 48ORP65B 48ORP65C 48
ORP674 48
ORP675 48ORP676 48ORP677 48ORP678 48ORP679 48ORP67A 48P1000-B4 20POC10-1 42, 43POC15-1 41, 42POC25-1 41POC5-1 42, 43POC7.5-1 42, 43RMT0004 35RMT0005 35RMT0062 18, 35SASB143T 63SASB145T 63SASB182T 63SASB184T 63SASB213T 63SASB215T 63SASB56 63SASB66 63SS008 14, 25SS030 10SS101 7, 25SS101L 7, 25SS103 7, 25SS103L 7, 25SS108 7, 28, 30SS119 7, 25SS120 7, 25SS122 7, 21, 25SS123 7, 28
SS124 7, 22, 25SS125 7, 22, 25SS127 7, 25
SS130 11, 18SS133 7, 31SS1332 9, 11SS1350 56
SS1352 56
SS1354 56SS1355 56SS1356 56SS137 7, 21
SS1444 56SS1446 56
SS1459 56SS1462 56SS174 14, 24SS201 12, 17, 33SS202 12, 33SS203 12, 32, 33SS205 10, 29SS206 12, 17, 32SS207 12, 32, 33SS208 12, 26SS209 12, 32, 33SS210 13, 21, 24SS212B 13, 21, 24SS212S 13, 21, 34SS213 12, 21, 24, 37SS214 12, 32, 33SS215 13, 21SS217 13, 21, 24, 34SS219 12, 33SS220 12, 30, 32SS2224 31SS2269 29SS230 12, 20, 21SS232 12, 33SS235 12, 39SS236 12, 39SS2360 16, 36, 39SS2380 16, 36, 39SS2398 15, 26SS2497 15, 31SS250 7, 39SS260 12, 35SS2603 14, 35SS2604 14, 35SS2605 15, 35SS2609 14, 28SS2612 14, 28SS2615 16, 36, 39SS262 12, 26, 35SS264 12, 35SS2655 34SS2657 14, 29SS2658 14, 24, 29SS266 12, 35SS2799 37, 38SS2930 15, 26SS2932 15, 26
SS2940 15, 26
‡‡
‡‡‡
‡
‡‡‡‡‡‡‡‡‡‡‡
‡
‡
‡‡‡‡‡
‡‡
‡
‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡
‡‡‡‡‡‡‡‡
‡‡
‡‡
‡
‡
‡
‡
(‡) New Product
67 www.omnidrive.ca
Index - Stock Number to Page
Stock # Stock # Stock #Page Page Page
SS2942 15, 26SS300 10, 18SS302 11, 18, 24SS303 10, 19, 37SS304 10, 33SS305 10, 33SS307 10, 29, 33SS3100 1, 33SS3101 1, 33SS3103 1, 24, 33SS311 10, 33SS313 10, 29, 37SS315 10, 33SS318 10, 18SS319 10SS3234 31
SS324 11, 19, 23SS326 10, 18SS332 10, 18SS336 10, 39SS34201 28SS348 38SS350 10, 31SS355 10, 33SS356 10, 17, 24, 26SS357 10, 24, 26SS358 10, 18SS3583 42SS3584 42SS3585 42SS3586 42SS3587 42SS3588 42SS3589 42
SS359 11, 18, 24
SS3590 42SS360 10, 29
SS3670 1, 17, 21, 33
SS368 10, 24, 35SS369 11, 24, 35SS370 10, 24, 29SS371 11, 24, 29SS3727 43SS3728 43SS3729 18, 43SS3730 18, 43SS3731 43
SS401 12, 23
SS403 12, 23, 32SS408 11, 24, 30SS409 10, 24, 26SS413 11, 30SS4200 31SS438 38SS440 13, 24, 33SS462 11, 38SS467 11, 33SS480 11, 21SS486 44SS506 12, 33, 39SS510 11, 19, 24, 39SS5109 5SS511 13, 18, 24SS5200 31SS5211 5SS5212 5SS5221 5SS5222 5SS5311 5SS5312 5SS5411 5SS5412 5SS5421 5SS5422 5
SS574 18SS575 18SS5811 5SS5812 5
SS5821 5SS5822 5SS601 1, 33SS603 1, 17, 33
SS604 1, 33SS605 1, 18, 25, 33, 38
SS610 1, 32, 33, 37SS611 1, 21, 28, 33
SS613 1, 33SS617 1, 21SS6264 31SS630 1, 35SS635 1, 21SS647 44SS671 9, 11SS672 9, 11SS6920 16, 36, 39
SS739B 18, 43
SS740B 43SS749 44SS750 44SS751 44SS752 42SS753 42SS754 42SS799 37, 38SS801 12, 33SS8318 15, 27SS9316 19SS9317 19SS933 40SS933D 40SS934 40SS934B 40SS934D 40SS935 40
SS935B 40
SS935D 40SS936D 40SS9428 22
SS958 14, 26
SS9721 18SS973 42SS974 42TA604 49
TA604C 51
TA605 49TA605C 51TA606 49TA606C 51TA607 49TA607C 51
TA624 49TA624C 51TA625 49TA625C 51TA626 49TA626C 51TA627 49TA627C 51TA654 50TA654C 52TA655 50TA655C 52TA656 50
TA656C 52
‡‡‡
‡‡
‡‡‡‡‡‡‡
‡
‡‡‡‡‡
‡
‡
‡
‡
‡
‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡
‡‡‡
‡‡
‡
‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
(‡) New Product
68www.omnidrive.ca
Stock # Stock # Stock #
Index - Stock Number to Page
TA674 50TA674C 52TA675 50TA675C 52TA676 50TA676C 52TCP657 55TCP658 55TCP659 55TCP65A 55TCP65B 55TCP65C 55TCP65D 55TCP65E 55TCP65F 55TCP65G 55TCP65H 55TCP65I 55TCP65J 55TCP65K 55TCP65L 55TCP65M 55TRP605 54TRP606 54TRP607 54TRP608 54TRP609 54TRP60A 54TRP654 54TRP655 54TRP656 54TRP657 54TRP658 54TRP659 54TRP65A 54TRP674 54TRP675 54TRP676 54TRP677 54TRP678 54TRP679 54TRP67A 54TRP704 54TRP705 54TRP706 54TRP707 54TRP708 54
UB1 2, 3, 23, 25
UB160 2, 3, 17, 23, 25, 26, 27UB168 2, 3, 27UB200T-2 2, 3, 22UB265 2, 3, 17, 23, 25, 26, 27
UB3 2, 3, 23, 25, 32UB33 2, 3, 22, 27, 32UB4 2, 3, 23, 25UB465 2, 3, 17, 23, 25, 26, 27UB5 2, 3, 23, 25UB579 2, 3, 36UFB189 2, 3UFB500 2, 3, 22, 23, 27UFM3714 8, 20, 26UFM410 8, 24, 36UFM653 8, 20, 26, 39UFM78 8, 26, 36
VENT-100 4VENT-150 4VENT-200 4VENT-250 4VENT-315 4WA611 49WA611C 51WA611J 57WA612 49WA612C 51WA612J 57WA613 49WA613C 51WA613J 57WA614 49WA614C 51WA614J 57WA615 49
WA615C 51WA615J 57WA616 49WA616C 51WA616J 57WA617 49WA617C 51WA617J 57WA631 49WA631C 51WA631J 57WA632 49WA632C 51
WA632J 57
WA633 49WA633C 51WA633J 57WA634 49WA634C 51WA634J 57WA635 49WA635C 51WA635J 57WA636 49WA636C 51WA636J 57WA637 49WA637C 51WA637J 57WA661 50WA661C 52WA662 50WA662C 52WA663 50WA663C 52WA664 50WA664C 52WA665 50WA665C 52WA666 50WA666C 52WA681 50WA681C 52WA682 50WA682C 52WA683 50WA683C 52WA684 50
WA684C 52WA685 50WA685C 52WA686 50WA686C 52WD661 47WD662 47WD663 47WD664 47WD665 47WD666 47WD682 47WD683 47
WD684 47
Page Page Page
‡‡
‡‡‡
‡‡
‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡
‡‡
‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡
‡‡‡
‡‡
‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡‡
(‡) New Product
WD685 47WD686 47WE612C 53WE613C 53WE614C 53WE615C 53WE616C 53WE617C 53WE661C 53WE662C 53WE663C 53WE664C 53WE665C 53WE666C 53WE681C 53WE682C 53WE683C 53WE684C 53WE685C 53WE686C 53WGR050 61WGR063 61
69
INTEGRITY OF CATALOG: The information contained in this catalog is for reference purposes only. We strive to ensure that the information is as accurate and current as possible. We are in no way responsible for any errors that may arise. We reserve the right to change specifications and other information included without prior notice. If you are concerned about the validity of the information ona certain product, please visit www.omnidrive.ca and contact us.
DISCLAIMER: All content offered from or available in our catalog are provided to you on an “as is” basis, without representations, warranties or conditions of any kind. You acknowledge and agree that any reliance by you on any information available in this catalog shall be at your own risk.
In no event shall OmniDrive be liable for any consequential, incidental, or any other damages. OmniDrive is also no way liable for any loss of profits the company may face. If for whatever reason, OmniDrive may face an accusation, OmniDrive’s liability does not exceed the purchase price of the equipment involved. All users are solely responsible to evaluate and acknowledge that the goods purchased will suitably meet the requirements of their intended use.
COPYRIGHT AND TRADEMARKS: OmniDrive is a registered trademark. It is owned and operated by 1279311 Ontario Inc. OmniDrive, the OmniDrive logo; images and layouts are and shall remain the trade-marks and exclusive property of OmniDrive. Any misuses of these marks are unlawful.
All rights reserved. You may not produce, copy, modify or redistribute the design or layout of the OmniDrive catalog.
It is important to note that OmniDrive is not affiliated with any of the original equipment manufacturers or their brands which may be referred to herein. Other trade-marks featured in this catalog are the property of their respective owners. No association between OmniDrive and any trademark holder is expressed or implied. The names, numbers, symbols and descriptions featured throughoutthis catalog are for cross reference purposes only.
www.omnidrive.ca
Stock #
Index - Stock Number to Page
Page
‡‡
(‡) New Product
Notes:
05.2013© 2013 OmniDrive® is a Registered Trademark. All Rights Reserved.
Available from: