6500 part 3

PowerPoint Presentation

ETHERNET LINECARD OVERVIEW

There are two parts to the processing functionality of the Switch - the Control Plane and the Data PlaneSWITCH CONTROL PLANESWITCH DATA PLANESwitch Features that are processed in SOFTWARE by a CPU

There are two control planes the Switch Processor Control Plane (SP) which processes software based Layer 2 features the Route Processor Control Plane (RP) which processes software based Layer 3 featuresSwitch Features that are processed in HARDWARE by Application Specific Integrated Circuits (ASICs)

ETHERNET LINECARDOVERVIEWAgenda TopicsCatalyst 6500 Linecards WAN - Enhanced FlexWAN

The WS-X6582-PA supports the following

Legacy PA Carrier CardUp to 625Kpps without QoSUp to 2 x OC3 throughputDual 400Mhz SiByte CPUsUp to 128MB of packet buffer per CPUDistributed QoS featurescRTPLFI - ATM, FR, MLPPPClassificationPolicingMarkingCBWFQ/LLQ and WREDPer Class Traffic ShapingCatalyst 6500 Linecards Services ModulesJUST A QUICK NOTE: Services Modules are not directly supported by the ISBU - rather they are supported by the respective BU that developed themWiSM

Supported by the Wireless BU (WNBU)FWSM, VPNSM, IDSM, VPN SPA, CSM, SSL, ACE, Anomaly Detector, Anomaly Guard

Supported by the Security Technology Group (STG)NAM-1, NAM-2

Supported by the Network Management BU (NMBU)MWAM, CSG, PSD

Supported by the Routing and Service Provider TG (RSPTG)Services Modules

Catalyst 6500 Linecards Centralized Forwarding Cards (CFC)The Centralized Forwarding Card (CFC) provides BUS connectivity for the CEF720 linecardsThe CFC is available on CEF720 linecards and provides the connection to the Classic BUS

CFC is used to communicate with the Supervisor when centralized forwarding is used

Catalyst 6500 Linecards Classic LinecardsThe Classic linecard connects to the 16Gb BUS - typically it has a number of Port ASICs on board that provide this connection as well as providing the front facing ports that hosts connect intoDBUSRBUSEOBCSupervisorPORTPORTPORTPORTLinecardThe BUS is often referred to as a 32Gb BUS

It is in fact a 16Gb BUS however, as it supports Full Duplex communication is was marketed as 32Gb (i.e. 16Gb Read + 16Gb Write) 16Gb BUSCatalyst 6500 Linecards Classic Linecards - WS-X6196-RJ-21

The WS-X6196-RJ-21 supports the following

Bus connectivity only96 ports 10/100 with RJ21 TelcoSupports IEEE Inline Power DaughtercardSupports up to 96 Cisco inline powered portsSupport up to 48 IEEE Class 3 devicesSupport up to 96 IEEE Class 2 devicesSupports strict priority queueReceive queue type 1p1q0tTransmit queue type 1p3q1tBuffers 28K Rx, 1088K TxCatalyst 6500 Linecards Classic Linecards - WS-X6148A\B-GE-TX

WS-X6148A\B-GE-TX wiring closet linecard for 10/100/1000 deployment- Adds support for Jumbo Frames and Q-in-Q Tunnelling- Supports 4 Transmit queues including one strict priority queue- Adds support for WRED- Optional IEEE POE daughtercard (802.3af for A model, 802.3at for B model)- 8:1 oversubscribed- 48 ports of 10/100/1000 RJ-45- Increased per port buffering (5.2Mb per port)- Integrated TDR for cable fault detectionCatalyst 6500 Linecards Classic Linecards - WS-X6148A/B-GE-TXLike the module on the previous slide, the WS-X6148A-GE-TX also has oversubscription which MUST be factored into any designs that you put forwardPort ASICPortASICPortASICPortASICPortASICPortASICPortASIC1Gb1Gb1Gb1Gb1Gb1GbDBusRBusEoBC8 x 1Gb8 x 1Gb8 x 1Gb8 x 1Gb8 x 1Gb8 x 1GbREMEMBER - THIS LINECARD IS 8:1 OVERSUBSCRIBEDCatalyst 6500 Linecards Classic Linecards - WS-X6148A-RJ-45

New improved WS-X6148A-RJ-45 wiring closet linecard for 10/100 deployment

Incorporates some of the following features 48 ports of 10/100 RJ-45 Increased per port buffering (5.2Mb per port) Integrated TDR for cable fault detection Supports 4 Transmit queues including one strict priority queue Adds support for WRED Supports optional IEEE POE daughter linecardCatalyst 6500 Linecards Classic Linecards - WS-X6148-FE-SFP

New improved WS-X6148-FE-SFP wiring closet linecard for 100FX to the desktop

Incorporates some of the following features 48 ports of 100FX Fiber ports Increased per port buffering (5.2Mb per port) Supports 4 Transmit queues including one strict priority queue Adds support for WREDCatalyst 6500 Linecards CEF256 LinecardsCEF256 represents the second generation of linecards - supporting a connection to the Classic Bus in addition to a connection to the Switch FabricSupervisorLinecardSwitch FabricFABRIC ASICPORT ASICPORT ASICPORT ASICPORT ASICA CEF256 linecard supports a single 8Gb Fabric channel connection into the Switch Fabric plus a connection into the 16Gb Classic BUS

Note the CEF256 Linecards also use a local BUS on the linecard8GbCatalyst 6500 Linecards CEF256 Linecards - WS-X6516A-GBIC

The WS-X6516A-GBIC supports the following

16 ports 1000Mb (GE) GBICSupports range of GBIC opticsConnection to the Shared BusSingle 8Gb Connection into the Switch FabricSupports optional DFC1MB Buffering per portEgress Multicast Replication2 receive queues and 3 transmit queuesSupports strict priority RX and TX queueCatalyst 6500 Linecards CEF256 Linecard- WS-X6548-GE-TXThe WS-X6548-GE-TX also has oversubscription which MUST be factored into any designs that you put forwardPortASICPortASICPortASICPortASICPortASICPortASIC1Gb1Gb1Gb1Gb1Gb1GbDBusRBusEoBC8 x 1Gb8 x 1Gb8 x 1Gb8 x 1Gb8 x 1Gb8 x 1GbREMEMBER - THIS LINECARD IS 8:1 OVERSUBSCRIBEDPort ASICPort ASICSUPERVISOR8GbSwitch FabricFIRE ASICCatalyst 6500 Linecards CEF256 Linecards - WS-X6548-GE-TX

The WS-X6548-GE-TX supports the following

48 ports 10/100/1000 RJ45Connection to the Shared BusSingle 8Gb Connection into the Switch FabricSupport for Cisco and IEEE Inline PowerInteroperates with all SupervisorsSome caveats 8:1 oversubscription No Jumbo Frames No support for ISL VLAN Trunking No Q-in-Q TrunkingCatalyst 6500 Linecards CEF720 LinecardsThe CEF720 is the third generation of high performance linecards to be introduced into the Catalyst 6500 linecard familySupervisorLinecardSwitch FabricCFC or DFCPORTASIC20GbFIRE ASICFIRE ASICPORTASICPORTASICPORTASICCEF720 Linecards connect into the BUS using a Centralized Forwarding Card (CFC)

They connect into the Switch fabric via dual 20Gb Fabric channels

NOTE: The BUS is NOT used for data only control traffic20GbCatalyst 6500 Linecards CEF720 Linecards - WS-X6748-SFPThe WS-X6748-SFP supports the following

CEF720 Linecard48 ports 10/100/1000 RJ45Connection to the Shared BusTwo x 20Gb Connections into the Switch FabricSupports optional DFC3 / DFC4Up to 48Mpps when DFC3 is usedUp to 52Mpps when DFC4 is used1.2Mb Buffering per portEgress Multicast ReplicationSupports Strict Priority queue on transmitSupports 2 receive queues per portSupports 4 transmit queues per portSupports Weighted Round Robin

Catalyst 6500 Linecards CEF720 Linecards - WS-X6748-GE-TX

The WS-X6748-GETX supports the following

CEF720 Linecard48 ports 10/100/1000 RJ45Connection to the Shared BusTwo x 20Gb Connections into the Switch FabricSupports optional DFC3 / DFC4Up to 48Mpps when DFC3 is usedUp to 52Mpps when DFC4 Is used1.2Mb Buffering per portEgress Multicast ReplicationSupports Strict Priority queue on transmitSupports 2 receive queues per portSupports 4 transmit queues per portSupports Weighted Round RobinCatalyst 6500 Linecards CEF720 Linecards - WS-X6704-10GE

The WS-X6704-10GE supports the following

CEF720 Linecard4 ports 10GE (Xenpak based)Connection to the Shared BusTwo x 20Gb Connections into the Switch FabricSupports optional DFC3/4Up to 48Mpps when DFC3 is usedUp to 52Mpps when DFC4 is used16Mb Buffering per portEgress Multicast ReplicationSupports Strict Priority queue on transmitSupports 2 receive queues per portSupports 8 transmit queues per portSupports Weighted Round RobinCatalyst 6500 Linecards dCEF720 Linecards WS-X6708-10G-3C/CXLThe dCEF720 linecards are the fourth generation of high performance linecards to be introduced into the Catalyst 6500 linecard familydCEF720 Linecards have no connection to the Data or Results buses


They come with a DFC3/4 pre-installed with no option for a CFC

20Gb20GbSwitch FabricPORT7FPGASupervisorEOBCPORT4PORT1PORT6PORT8PORT2PORT3DFC3/4FABRIC INTFPORT5FPGA MUXFPGA MUXFPGAFIREASICFPGA MUX FPGA MUXFABRIC INTFFIRE ASICBACKPLANE INTFCatalyst 6500 Linecards dCEF720 Linecards - WS-X6708-10G-3C / 3CXL

The WS-X6708-10G-3C/3CXL supports the following

dCEF720 Linecard8 ports 10GE (X2 based)No Connection to the Shared BusTwo x 20Gb Connections into the Switch FabricSupports integrated DFC3 / DFC4Supports VSL on all portsUp to 48Mpps with DFC3Up to 60Mpps with DFC4256MB Buffering per portEgress Multicast ReplicationSupports Strict Priority queue on transmitSupports 2 receive queues per portSupports 8 transmit queues per portSupports Weighted Round Robin and Shaped Round RobinCatalyst 6500 Linecards dCEF720 Linecards WS-X6716-10x-3C/CXLThe dCEF720 linecards are the fourth generation of high performance linecards to be introduced into the Catalyst 6500 linecard family20Gb20GbSwitch FabricFPGASupervisorEOBCDFC3/4FABRIC INTFFPGAFABRIC INTFFIRE ASICdCEF720 Linecards have no connection to the Data or Results buses


They come with a DFC3/4 pre-installed with no option for a CFC

MUX1234MUXMUXMUX5678MUX910111214151613MUXMUXMUXMUXMUXMUXMUXBACKPLANE INTFPORTASICPORTASICPORTASICFIREASICPORTASIC

Catalyst 6500 Linecards dCEF720 Linecards - WS-X6716-10G-3C / 3CXLThe WS-X6716-10G-3C/3CXL supports the following

dCEF720 Linecard16 ports 10GE (X2 based)No Connection to the Shared BusTwo x 20Gb Connections into the Switch FabricSupports integrated DFC3 or DFC4Programmable port groups for flexible port utilizationUp to 48Mpps with DFC3Up to 60Mpps with DFC4Up to 256MB Buffering per portEgress Multicast ReplicationSupports Strict Priority queue on transmitSupports 2 receive queues per portSupports 8 transmit queues per portSupports Weighted Round Robin and Shaped Round RobinCatalyst 6500 Linecards dCEF720 Linecards - WS-X6716-10T-3C / 3CXLThe WS-X6716-10T-3C/3CXL supports the following

dCEF720 Linecard16 ports 10GE (X2 based)No Connection to the Shared BusTwo x 20Gb Connections into the Switch FabricSupports integrated DFC3 / DFC4Programmable port groups for flexible port utilizationUp to 48Mpps with DFC3Up to 60Mpps with DFC4Up to 256MB Buffering per portEgress Multicast ReplicationSupports Strict Priority queue on transmitSupports 2 receive queues per portSupports 8 transmit queues per portSupports Weighted Round Robin and Shaped Round Robin

Catalyst 6500 Linecards dCEF2T Linecards WS-X6908-10G / -10G-XLThe dCEF2T linecards are the latest generation of high performance linecards to be introduced into the Catalyst 6500 linecard familyLinecard40GbdCEF2T Linecards have no connection to the Data or Results buses


They come with a DFC4 pre-installed with no option for a CFC

40GbSwitch FabricPORTASICFPGAFPGASupervisorFABRIC INTERFACEEOBCCTSASICPORTASICPORTASICPORTASICPORTASICPORTASICPORTASICPORTASICCTSASICCTSASICCTSASICCTSASICCTSASICCTSASICCTSASICFIREASICFIREASICFIRE ASICFIRE ASICDFC4Encryption at hardware level , it is only come with DFC line card.

24Catalyst 6500 Linecards dCEF2T Linecards - WS-X6908-10G / -10G-XLThe WS-X6908-10G supports the following

dCEF2T Linecard8 ports 10GE (X2 based)No Connection to the Shared BusTwo x 40Gb Connections into the Switch FabricSupports integrated DFC4 / DFC4XLSupports Cisco TrustSec on all portsSupports VSL on all portsUp to 60Mpps local forwardingUp to 256MB Buffering per portEgress Multicast ReplicationSupports Strict Priority queue on transmitSupports 2 receive queues per portSupports 8 transmit queues per portSupports Deficit Weighted Round Robin and Shaped Round Robin

Catalyst 6500 Linecards dCEF2T Linecards - WS-X6904-40G / -40G-XLTarget Release 1HCY11IEEE 802.3ba Standard Compliant

80Gbps Backplane

CFP Transceiver Form Factor

Earl8 Lite and Heavy Versions

Convertible to 16p 10GbE ports via SFP+ via FourX Adapter

CTS and L2 Encryption IEEE 802.1ae on all ports wire speed

Virtual Switch Link supported on all ports

Catalyst 6500 Linecards 10G Optics

Xenpak Modular OpticX2 Modular OpticTransceiverCable TypeDistancesCX4CX4 (Copper)Up to 15mSRMMF26m to 300mLRMMMF100m to 220mLX4MMF240m to 300mLR / LR+SMFUp to 10kmER / ER+SMFUp to 40kmZRSMFUp to 80kmDWDMSMFUp to 80kmCatalyst 6500 Linecards40G Transceivers

WAN LINECARD OVERVIEW



WAN LINECARDOVERVIEWAgenda TopicsCatalyst 6500 Linecards WAN - SIP200

The 7600-SIP-200 supports the following

Cisco 7500 Feature ParityUp to 1.1Mpps without QoSUp to 622Mbps performanceDual Core CPUs4 bays for SPAsUp to 128MB of packet buffer per CPUDistributed HQoS featurescRTPMLPPP and LFI in hardwareClassificationPolicingMarkingCBWFQ/LLQ and WREDPer Class Traffic ShapingCatalyst 6500 Linecards WAN - SIP200

The 7600-SIP-200 supports the following Supervisor options

All Sup720 variantsSup32-8GESup32-10GESupported in all 6500 chassis except 6503

Check the IOS Release Notes for your particular release to see the minimum support levelCatalyst 6500 Linecards WAN - SIP200SPA NameDescriptionSPA-1xCHSTM1/OC31-port Channelized STM1/OC3 to DS0 SPA SPA-8XCHT1/E18- port Channelized T1/E1 SPASPA-4XT3/E34-port T3/E3 SPASPA-2XT3/E32-port T3/E3 SPASPA-4XCT3/DS04- port Channelized T3 SPASPA-2XCT3/DS02- port Channelized T3 SPASPA-4XOC3-POS4-port POS OC3 SPASPA-2XOC3-POS2-port POS OC3 SPASPA-4XOC3-ATM4- port ATM OC3 SPASPA-2XOC3-ATM2- port ATM OC3 SPASPA-8X1FE-TX-V2 8-port 10/100 Ethernet SPA TX SPA-4X1FE-TX-V2 8-port 10/100 Ethernet SPA TX Catalyst 6500 Linecards WAN - SIP200 ArchitectureA block diagram of the SIP200 linecard is shown belowSupervisorSwitchFabricSPA CONNECTIONTXRXDUALCORECPURAMMulticast Replication andFabric Interface8GbI/OEOSEOBCRAMFlashBootLogicSIP200Catalyst 6500 Linecards WAN - SIP400


Network Processor based carrier cardUp to 6.2Mpps @ 40 byte packetsUp to 4Gbps performance @ 64 byte packetsDual Network Processors4 bays for SPAsReplacement for OSM32,000 Queues3 level Hierarchical QoSDual Rate, 3 Color PolicerCBWFQ + LLQ + WREDEoMPLSFRoMPLSATM AAL5 over MPLSATM Cell Relay over MPLSCatalyst 6500 Linecards WAN - SIP400SPADescriptionSPA-2XOC3-POS 2-port OC-3c/STM-1c POS SPA (SFP)SPA-4XOC3-POS4-port OC-3c/STM-1c POS SPA SPA-1XOC12-POS 1-port OC-12c/STM-4c POS SPA (SFP)SPA-2XOC48POS/RPR 2-Port OC-48 POS/RPR SPA (SFP) SPA-1XOC48POS/RPR 1-Port OC-48 POS/RPR SPA (SFP)SPA-2XOC3-ATM 2-port OC-3c/STM-1c ATM SPA (SFP)SPA-4XOC3-ATM 4-port OC-3c/STM-1c ATM SPA (SFP)SPA-1XOC12-ATM 1-Port OC-12c/STM-4c ATM SPA (SFP)SPA-1XOC48-ATM 1 port OC-48c/STM-16 ATM SPASPA-2X1GE-V2 2-port Gigabit Ethernet SPA, SFP Optics, Version 2SPA-2X1GE2-port Gigabit Ethernet SPA, SFP OpticsSPA-1X10GE-L-V2 1-Port 10 Gigabit Ethernet SPA (XFP)SPAs supported by the SIP400 include the followingCatalyst 6500 Linecards WAN - SIP400 ArchitectureA block diagram of the SIP400 linecard is shown belowSupervisorSwitchFabricSPA CONNECTIONSPAMUXASICIngressNetworkProcMulticast Replication andFabric Interface20GbSwitchInterfaceTCAMSIP400EgressNetworkProcSRAMDSRAMDRAMControlProcDRAMCatalyst 6500 Linecards WAN - SIP600


Integrated DFC38000 full duplex queuesUp to 10Gbps performance @ 64 byte packetsDual Network Processors1Gb local Memory20Gb Switch Fabric ConnectionNo connection to the Classic BUSSup720-3B and Sup720-3BXL only

VPLS/H-VPLSSecurity ACLsPolicingClassificationMarkingCBWFQ/LLQHierarchical Traffic ShapingShaping/WREDCatalyst 6500 Linecards WAN SIP600SPADescriptionSPA-1XTENGE-XFP 1-port 10-Gigabit Ethernet SPA (XFP)SPA-10X1GE10-port Gigabit Ethernet SPA, SFP OpticsSPA-5X1GE 5-port Gigabit Ethernet SPA, SFP OpticsSPA-OC192POS-VSR 1-port OC-192c/STM-64 POS/RPR SPA, VSR-1SPA-OC192POS-LR 1-port OC-192c/STM-64 POS/RPR SPA, SM-LR SPA-OC192POS-XFP SPA-OC192POS-XFPSPA-OC192POS-VSR1-port OC-192c/STM-64 POS/RPR SPA, VSR-1 SPAs supported by the SIP600 include the followingCatalyst 6500 Linecards WAN - SIP600 ArchitectureA block diagram of the SIP600 linecard is shown belowSupervisorSwitchFabric10GE SPASPAINTFASICMulticast Replication andFabric Interface20GbCPUTCAMSIP600HighSpeedQueuingShapingASICFabricASICDFC3SPAControlASICSERVICE MODULE OVERVIEW



SERVICE MODULEOVERVIEWAgenda TopicsCatalyst 6500 Linecards Services Modules - ACE

ACEVirtual partitioning (up to 250 Contexts)Up to 16Gbps performance6.5Mpps350,000 SYSLOGs per second4 Million concurrent connections16K Real or Virtual ServersMultiple probes (ICMP, TCP, UDP, etc)HTTP deep packet inspectionBi-Directional NAT/PATTCP Connection State TrackingTCP Header validation and window size checkingURPF check at session establishmentCatalyst 6500 Linecards Services Modules - FWSM

Virtual partitioning (up to 250 Contexts)Routed and Transparent FirewallUp to 5Gbps of PerformanceBi-Directional NATPolicy Based NATFWSMURL FilteringOSPF Routing Protocol SupportObject GroupingActive-Standby Inter/Intra FailoverARP InspectionCatalyst 6500 Linecards Services Modules - IDSMIDSM

Up to 600Mbps performance (passive)Up to 500Mbps (inline)Advanced false positive reductionSupports multiple capture techniquesSingle device management using CLI or IPS device managerUp to 6000 HTTP transactions per secondUp to 6000 TCP connections pe secondUp to 60,000 concurrent connectionsHot swap moduleStandard code base 100% compatible with Cisco standalone IPS devicesCatalyst 6500 Linecards Services Modules - NAMNAM

Application MonitoringPerformance ManagementFault IsolationTroubleshootingTrend AnalysisCapacity planning VOIP MonitoringQoS and DSCP monitoringMIB II RFC1213RMON (RFC2819) All groupsRMON2 (RFC2021) All groupsSMON (RFC2613)DSMON (Rmon extensions for Diffserv)ART MIBHCRMONGet latest nam Overviw from JoanCatalyst 6500 Linecards Services Modules - WiSM

WiSMCEF720 based moduleIEEE 802.11a, 802.11b, 802.11g, 802.11d, 802.11hIntelligent RF Control plane supporting self-configuration, self-healing and self-optimizationIntrusion Detection / Mobility ManagementHTTP, HTTPS, CLI, Telnet, SSH management interface optionsEncryption options include WEP and TKIP-MIC: RC4 40, 104 and 128 bits (both static and shared keys) Secure Sockets Layer (SSL) and TLS: RC4 128-bit and RSA 1024- and 2048-bit AES: CCM, CCMPCFC / DFC OVERVIEW



CFC / DFCOVERVIEWAgenda TopicsCatalyst 6500 Linecards Distributed Forwarding Card 4 (DFC4)The DFC4 is an option for CEF720 linecards - it is used to provide local forwarding lookups for the linecard to incrementally boost overall switch performance - if installed on a CEF720 linecard, it takes the place of the CFCThe DFC4 supports forwarding rates up to 60Mpps

The DFC4 also stores a local copy of the forwarding tables, as well as Security and QoS ACLs that are centrally defined

The DFC4 is located underneath a protective cover that protects the daughtercard from getting damaged when the linecard is inserted or removed from a chassis

The DFC4 will NOT be field upgradableTwo different versions of the DFC are supported

DFC4DFC4XL

Catalyst 6500 Linecards Distributed Forwarding Card 3 (DFC3)The DFC3 is an option- it is used to provide local forwarding lookups for the linecard to incrementally boost overall switch performance - if installed on a CEF720 linecard, it takes the place of the CFC

The DFC3 supports forwarding rates up to 48Mpps

The DFC3 also stores a local copy of the forwarding tables, as well as Security and QoS ACLs that are centrally defined Three different versions of the DFC3 are supported

DFC3aDFC3B/DFC3BXLDFC3C/DFC3CXLCatalyst 6500 Linecards DFC3/4 Interoperability with PFC3/4PFC3APFC3BPFC3BXLPFC3CPFC3CXLPFC4PFC4XLDFC3AOperate as PFC3AOperate as PFC3AOperate as PFC3AOperate as PFC3AXXDFC3BOperate as DFC3AOperate as PFC3BOperate as PFC3BOperate as PFC3BXXDFC3BXLOperate as DFC3AOperate as DFC3BOperate as PFC3B and DFC3BOperate as PFC3BXLXXDFC3COperate as DFC3AOperate as DFC3BOperate as PFC3B and DFC3BOperate as PFC3CX

X

DFC3CXLOperate as DFC3AOperate as DFC3BOperate as DFC3BXLOperate as DFC3CXXDFC4XXXXXOperates as PFC4DFC4XLXXXXXOperates as DFC4Catalyst 6500 Linecards Mixing Different Linecards ArchitecturesWhen transferring data between linecards, the backplane will operate in one of three modes these modes are determined by the combination of linecards installed in the chassis and which module the traffic sourced from and destined toModeDescriptionFLOW THROUGHUsed for traffic between non fabric (classic) enabled modules and for traffic between a non fabric and a fabric enabled linecardcentralized performance to 15Mpps (not used for Sup2T)COMPACTUsed when only ALL fabric enabled linecards used in a chassis this mode uses a compact from of DBus header which optimizes centralized performance to 30MppsTRUNCATEDUsed for traffic between fabric enabled linecards when a non fabric enabled linecard is installed in the chassis. In this mode, centralized forwarding reverts back to 15Mpps. (used with Sup2T and FWSM, NAM)POWER OVER ETHERNET OVERVIEW



POWER OVER ETHERNETOVERVIEWAgenda Topics

Catalyst 6500 Linecards Understanding IP Phone SupportThere are three main areas where the switch interacts with the Cisco IP Phone they are in the areas of delivery of inline power ,VLAN tagging, and extended trust settings. Primary VLANAuxiliary (Voice) VLANInline power delivery to power the PhoneRe-tagging packets from downstream device to a value pre-determined by the administratorSegregated VLANs for Voice and Data traffic

Catalyst 6500 Linecards Inline Device DiscoveryWhen a switchport configured for inline power comes online, the switch will send a Fast Link Pulse (FLP) to the attached device in the Cisco IP phone, it will loop the FLP back to the switch, indicating its inline power capable - at this point the switch is ready to deliver inline power IP Phone Switch PortRXTXFLPFLPIts an inline device

Catalyst 6500 Linecards Default Inline AllocationWhen a switch port is enabled for inline power, upon discovery of an attached inline device, it will deliver a default amount of power to the attached device - 12345678Switch PortEach UTP cable contains 8 wires On the Catalyst 6500 Inline powered capable line cards, inline power is delivered over pins 1, 2, 3 and 612345678The default inline power allocation is 15 Watts once the inline device is enabled, it will use CDP to adjust its power to the actual requirement of the inline device

Catalyst 6500 Linecards Adjusting the Default Inline AllocationAfter the phone is powered up, it will use Cisco Device Protocol (CDP) to instruct the switch to adjust the delivered power to a specific value non IEEE and IEEE based Cisco phones will negotiate the default allocation of 15.4 Watts down to their required power value. This allows the switch to avoid wasting unnecessary powerHere is the default allocation of 15.4WCan you adjust the power down to 12WSure power now delivered at 12W

Catalyst 6500 Linecards WS-F6K-48-AF Power Daughter Card

Provides up to 15.4W (IEEE Class 3) for up to 48 ports

Provides up to 16.8W (Cisco Enhanced PoE) for up to 45 ports

Supported in linecards for both 6500 and 6500-E chassis

Supports bi-directional CDP support for negotiation of power

Supports power shut down if port draws more power than configuredCatalyst 6500 Linecards WS-F6K-48-AT Power Daughter Card

Provides up to 30W (IEEE Class 4) for up to 48 ports of the WS-X6148B-GE-45AT linecard

Requires E-Series Chassis and 8700W Power Supply to support 48 ports at 30W

Supported in linecards for both 6500 and 6500-E chassis

Supports bi-directional CDP support for negotiation of power

Supports port prioritization should system resources become limitedAdditional Information

CSSTG TME Wikihttp://bock-bock.cisco.com/wiki/CSSTG_TechMarketing:6500_Linecards

Linecard Cheat Sheetshttp://bock-bock.cisco.com/~tme6500/cgi-bin/lc_cheatsheet.pl

Linecard Comparison Spreadsheethttp://bock-bock.cisco.com/~csolder/tools/linecard-com.xls

6500 part 3

Documents

Transcript of 6500 part 3