CCCEEERRRTTT MMMAAAGGGIIICCC

Demo Edition

Cisco Express Foundation for Systems EngineersExam: 642-374

642-374

1 http://www.certmagic.com

QUESTION: 1A potential client wants inexpensive remote access and fast deployment of new sites. Whichtwo options would you focus on? (Choose two)

A. ACL managementB. cable and DSL route modelsC. CiscoAnyConnect and SSL VPND. CBACE. remote security

Answer: B,C

QUESTION: 2When should you run multiple protocols?

A. when you want to decrease the complexity of the networkB. when you want easier optimizationC. when you migrate from an old IGP to a new IGPD. when you want higher efficiency

Answer: C

QUESTION: 3Which statement concerning the Active/Active failover feature is correct?

A. ASA security Appliance failover pair must have either an Unrestricted and UR license ora UR and FO-A/A license to be able to support Active/Active failoverB. If an active security context within the primary security appliance fails, the status of theprimary security appliance unit changes tofailed , while the secondary failover securityappliance unit transitions to activeC. Active/Active failover is supported in multiple modeconfiguration onlyD. Active/Active failover supports site-to-site IPSec VPNstateful failover

Answer: C

QUESTION: 4Cisco ISR Routers offer which three of these security benefits?(Choose three)

A. Onboard VPN accelerator

642-374

2 http://www.certmagic.com

B. events correlation and proactive responseC. high-performance AIM VPN modulesD. virtual firewallE. Cisco IOS firewall and IOS IPS F. transparent firewall

Answer: A,C,E

QUESTION: 5What is used to avoid power drops and running power to access points?

A. CiscoAironet 1140 seriesB. End-point PSEC. Midspan PSED. PoE-enabled switches

Answer: D

QUESTION: 6Which two WAN interfaces does the Cisco SRP 520 Series support? (Choose two)

A. Fibre ChannelB. ADSL2+C. serialD. Fast EthernetE. passive opticalnetwork(PON)

Answer: B,D

QUESTION: 7A customer is considering purchasing either a Cisco Catalyst 2960 or Cisco CatalystExpress 500.Which feature can be only found on the Catalyst 2960?

A. 48 Ethernet 10/100 portsB. Fast Ethernet and Gigabit Ethernet connectivityC. dual-purpose copper or fiber uplinksD. standalone fixed-configuration Layer 2 switching

Answer: A

642-374

3 http://www.certmagic.com

QUESTION: 8How does the Cisco Small Business Pro Service differ from the Cisco Small Business ProWarranty?

A. Access to Cisco Small Business Support CommunityB. device-level warrantyC. Cisco Small Business Pro products onlyD. speed of hardware replacement

Answer: A

QUESTION: 9Which combination of port is available on the Cisco SPA 8800 voice gateway?

A. one station port and one trunk port (1xFXS and 1xFXO)B. two station ports (2xFXS)C. four station ports and four trunk ports (4xFXS and 4xFXO)D. eight station ports (8xFXS)

Answer: C

QUESTION: 10Which pre-sales SMART design documents are available to help you implement and installa solution? (Choose three)

A. Quick Quoting toolB. Small Business Product GuideC. Smart Business Communications systemD. Solution ProfileE. Overview presentationF. Cisco Configuration Assistant

Answer: B,D,E

QUESTION: 11A client needs a solution of a challenging RF environment. The situation requires theantenna versatility that is associated with connected antennas, a rugged metal enclosure, anda broad operating temperature range. Which access point would you recommend?

642-374

4 http://www.certmagic.com

A. CiscoAironet 1240AG SeriesB. CiscoAironet 1230AG SeriesC. CiscoAironet 1140 SeriesD. CiscoAironet 1130AG Series

Answer: A

QUESTION: 12What are two features of Cisco Configuration Professional? (Choose two)

A. software installation for Cisco Configuration Professional router ConfigurationB. delayed network and router resource monitoringC. Cisco Easy VPN serverD. three-step router lockdownE. web-based management toolF. limited configuration support for LAN and WAN interfaces

Answer: A,F

QUESTION: 13What should you do if a customer wants to provide certain areas within wireless coverage ata specific data rate?

A. Perform a single surveyB. Find out where the coverage pool is for one data rate, and calculate the rest based on thatinformationC. Map out higher data rate cells onlyD. Find out how much throughput the user will require

Answer: B

QUESTION: 14What are two of the four key benefits of the ISR platforms? (Choose two)

A. monitoring, analysis, and responseB. investment protectionC. guest accessD. voice and mobility readyE. storage virtualization

642-374

5 http://www.certmagic.com

Answer: B,D

QUESTION: 15Which statement best describes clustering in a small-business wireless network?

A. automatically configures wireless client devices via Wi-Fi Protected SetupB. can get real-time traffic or bandwidth statistics froma access point within a clusterC. replicates configuration parameters across access points in the cluster, while optimizingnetwork performanceD. allows multiple access points to be connected wirelessly, without the need for a wiredEthernet network

Answer: C

QUESTION: 16Which two of these statements best describe fast secure roaming for the wireless corefeature set using autonomous access point? (Choose two )

A. It is compatible with all wireless clientsB. It reduces roaming latency through reduced client RF channel scanning enhancementsC. It reduces roaming latency to targeted times of less than 75msD. Roaming occurs withoutreauthentication through a centralized RADIUS serverE. It is enabled through WLSE deployment

Answer: B,D

QUESTION: 17Which three Cisco Configuration Professional features might prompt a client to consider anupgrade? (Choose three)

A. association ofQoS policies with router interfacesB. VPN and WAN connection testingC. role-based accessD. security auditE. WAN and VPN troubleshootingF. Cisco Configuration Professional ExpressG. AAA

642-374

6 http://www.certmagic.com

Answer: C,D,E

QUESTION: 18Using SMART Designs increases the typical deal size by how much?

A. 2xB. 3xC. 5xD. 10x

Answer: B

QUESTION: 19In the plan phase, network readiness assessment addresses which customer need?

A. an assessment of the preparedness of the customer s existing system infrastructure tosupport a proposed solutionB. a comprehensive design that has been customized based on the operations processes,network management processes, and tools of its systemC. a in-depth assessment of the operational environment required to support the operation ofboth the current and planned solutionsD. the optimal technologies for supporting its business requirements and objectives

Answer: A

QUESTION: 20Which of these best describe the Cisco Lifecycle Services approach?

A. a methodology for proactively updating equipment before it reaches its end of its lifeB. a methodology for introducing new technologyC. a methodology for creating a business planD. a methodology for determining total cost of ownership

Answer: B

642-374

7 http://www.certmagic.com