6000 STRIP-TILL EQUIPMENT

The Right EQUIPMENT, The Right TIME

The Complete Strip-Till Solution

Hiniker Strip-Till Solution

14" Row Cleaners: Individually adjustable, spring loaded row cleaners are standard equipment and feature heavy duty hubs and sealed bearings.

ALL-NEw HEAvy DUTy Row UNITS fRoM HINIkER Provide Quick Adjustments & Easy Access!

Strip-Till: The Hiniker SolutionThe practice of strip-tillage continues to gain acceptance with row crop farmers across the country. With the Hiniker strip-till solution you will realize the economic, agronomic and environmental benefits of this tillage method.

Hiniker’s shank fractures the soil 5-9" deep while concave discs capture and place the disturbed soil into a berm directly over the tilled strip, creating an ideal seedbed. The raised berms produced with strip-tillage result in a warmer, dryer seedbed, allowing for earlier planting in heavy soils than other systems, notably no-till. In addition, compaction issues are reduced with the strip-till method as a result of fewer trips across the field.

Strip-Till: Increased SavingsWith strip-tillage, input costs may be significantly reduced while maintaining and often improving yields. • Uselessfertilizerthan

broadcast applications*• Minimizefuelcostswithfewertrips

across the field• Reducedtripsalsomeanstimesavings

*According to university research data

Strip-Till: Improving water Quality Everyone needs to be concerned about water quality and the role they play in maintaining it for future generations. The adoption of Best Management Practices can help ensure that everyone is doing their part. Precision placement of nutrients with strip-till is one such practice that can help reduce the potential for runoff, while making the most efficient use of crop fertility.

Strip-Till: Higher yield Potential & fertilizer Effectiveness In addition, research has shown that precision seed placement directly above a zone of fertility has increased yield potential. Season-long fertilizer availability is also enhanced when fertilizer is placed in the slot while strip-tilling. Also, residue remains between the rows where it can aid in moisture conservation, erosion control and weed suppression.

Strip-till practices may also benefit crops growing under irrigation. The increased water infiltration and deeper root development that are a result of strip-tillage mean irrigation requirements can often be reduced while still maintaining yields.

Dual 16" gauge wheels offer precise depth control.

Spring cushioned and adjustable 18" coulters help compensate for wear and conditions. Includes cleaning scraper.

Quick Depth Adjustment requires no tools and is easily accessed from the front of the row unit.

Excellent Residue Handling: Dual gauge wheels hold down residue as spring cushioned coulter cuts ahead of shank.

2

Aggressive and Precise: Hiniker heavy duty row units get the job done.

Hiniker Strip-Till Solution

Rolling baskets feature convenient “flip-up” storage when not in use.

Shank & Point: High tensile steel shank is accurately set to work depths of 5" to 9" while chrome carbide point fractures and raises soil. NH3 or liquid fertilizer tube is standard. Diffuser plate distributes granular material and assists in sealing of NH3 materials.

Choice of standard 21⁄8" wide or optional 15⁄16" wide chrome alloy point.

ALL-NEw HEAvy DUTy Row UNITS fRoM HINIkER Provide Quick Adjustments & Easy Access!

The T1 alloy steel, 5⁄8" x 4" shank features a replaceable leading edge chrome alloy wear strip.

Berming Discs: 18" discs capture ripped soil and place it into the berm. Wrenchless “no-tools” operating width adjustment for customizing berm height.Discmountingswithmultipleadjustmentsfitmore soil conditions. Adjustable for both width and angle plus fore and aft positioning. Optional scraper and down pressure spring kits are available to aid in working in wet, sticky soils.

Optional Rolling Baskets: Fracture and crumble soil clods in berm when operating in less than ideal conditions. “No-tools” down pressure adjustments for quick, accurate repositioning.

A 3⁄8" o.D. stainless steel tube for NH3 or liquid fertilizer application is included.

3

Auto reset offers up to 10" of obstacle clearance.

REAR wHEEL LIfTHINIkER 12 aNd 16 Row PUll-TyPE STRIP-TIll ToolbaRS wITH REaR wHEEl lIfT aSSEMbly

• FeaturesNewHDSeriesRowUnitsandNewLift AxleAssemblywith11R-22.516PlyTires.

• ForStrip-TillUsewithNH3,LiquidorGranular Fertilizers with Pull Behind Wagons, Tractor MountedTanksetc.

• SizesAvailableare12Row30"with 7"x7"Toolbarand170°Foldor16Row 30" Dual Fold Narrow Transport Toolbars.

Use to pull NH3 Tanks, Liquid Supply Tanks and Pull Behind Granular Fertilizer Systems.

Folded Up.

Unfolded.

Optional telescoping rear hitch and anhydrous control system applicable to both rear wheel lift and cart systems.

4

8 and 12 row fully mounted models also available from Hiniker.

HyDRAULIC LIfT/HITCH SySTEM

16 Row UNIT

Combination hydraulic lift/hitch system provides plenty of ground clearance when turning and transporting. This system lifts only the implement and not the load of fertilizer which is easily carried on the cart frame. This close coupled design results in a machine which is easily transported, turned and backed up when necessary.

Hiniker strip-till equipment is available in both 3-point mounted and pull-type configurations. 3-point units are available in 8 and 12 row sizes. Pull-type units, complete with granular or liquid fertilizer cart/lift assist systems, are available in 12 and 16 row configurations.

REAR wHEEL LIfT

5

The Hiniker 16 row 30" model features a massive, dual narrow fold (14'-6" transport width) toolbar design. The unit folds completely hydraulically from the tractor seat.

Attached to either the 7 ton combination lift assist cart or the new rear wheel lift assembly, the result is a heavy duty, user friendly machine that is highly maneuverable both in the field and when in transport from field to field.

12 Row Shown.

16 Row/30" Shown.

SINGlE CoMPaRTMENT GRANULAR fERTILIZER SySTEMS7 Ton Capacity, "scale ready" stainless steel hopper, combination lift assist/fertilizer cart features individual row metering for accurate row to row placement of fertilizer. Variable rate hydraulic metering drive is standard. Hopper opening is screened to protect metering components from foreign material and features a roll top tarp covering system.Fulllengthstainlesssteelagitatorensuresconsistentproductflow.

Individual Row Metering Components ensure accurate row to row distribution of fertilizer. (Single metering shown.)

Hopper Opening Screen protects metering components.

6

Variable rate hydraulic metering drive. Optional Digi-Star EZ 400 scale system.

Complete pull-type 6000ST systems available with combination lift assist/fertilizer carts, including either stainless steel granular or 1000 gallon liquid fertilizer systems. Available in 30 inch row spacings on 20, 30, or 40 ft. toolbars.

Also available in 3-point mounted toolbar/row unit configurations without fertilizer cart in 8 and 12 row sizes.

lIQUId fERTIlIZER SySTEMS

Optional Hiniker 8160 Control will ensure accurate control of liquid fertilizers as well as NH3.

1000 Gallon Liquid System.

fERTILIZER oPTIoNS

GRaNUlaR fERTIlIZER SySTEM SkId*• Availableas155cubicfoot(5toncapacity)

or 217 cubic foot (7 ton capacity) stainless steel hopper

• 16Individualstainlesssteelmetersfor accurate row to row product distribution

• 4"x6"Tubularskidframe• Hydraulicallydrivenblowersystem (12GPMflowrequired)

•Skidunitsarenot"scaleready"* Special order items. Contact factory for details.

7

HINIKER COMPANY58766 240 St. • P.O. Box 3407Mankato, MN 56002-3407Phone (507) 625-6621Fax (507) 625-5883www.hiniker.com

Row Units: • Parallellinkagewith8"ofverticaltravel• Autoresetforupto10"ofobstacleclearance• “No-Tools”leveradjustmentsofdepth,coulterand

down pressure • 4x16Dualgaugewheelsforaccuratedepthcontrol• 5⁄8" x 4" Shank of T1 alloy steel with leading edge

chrome alloy wear strip• 18"Springcushionedcuttingcoulter• 21⁄8" or 15⁄16" Chrome alloy replaceable point • 3⁄8" OD stainless steel liquid fertilizer / NH3 tube • 18"Non-sharpenedbermingdiscs,adjustableforwidth,

angle and fore and aft placement Row Cleaners: • Freefloatingwithindividuallyadjustable

14" diameter notched discs • Infinitedepthadjustment• Heavydutyhubswithsealedballbearingsand

dust caps • Individuallyspringloadeddownpressure

Rolling Basket Assemblies: • Replaceablesealedballbearings• Adjustablespringdownpressureandflip-upstorage• 13"wide–8slat

folding Toolbar Assemblies (for pull-type use): • 12row30"–7x7x1⁄2 center frame. 170° fold • 16row30"–dualfold–narrowtransporttoolbar.

170° fold

Liquid fertilizer Cart / Lift Assist / Hitch Package: • 1000gallonpolytankwithstainlesssteelagitation• Combinationcart/liftassist/pull-typehitchwith hydrauliccylinders,hose,SMVsign,safetychain and lighting

• Adjustableaxles(wheelspacings120"-155") 10 bolt hubs

• 380/90R46"Highcapacitytiresandrims Granular fertilizer Cart / Lift Assist / Hitch Package: • 217cu.ft.stainlesssteelhopperwithscreened

opening with roll top tarp (approximately 7 ton @ 65 lb product density)

• Singlehopperswith2"deliverytubing• Stainlesssteelagitator• Variableratehydraulicdrives• Ratesadjustableupto600lbs.peracre• Combinationcart/liftassist/pull-typehitchwithhydrauliccylinders,hoses,SMVsign,safetychain and safety lighting

• Adjustableaxles(wheelspacings120"-155") 10 bolt hubs

• 380/90R46"Highcapacitytiresandrims• ScaleSystem

WE RESERVE THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE. THE ONLY WARRANTY APPLICABLE IS OUR STANDARD WRITTEN WARRANTY. WE MAKE NO OTHER WARRANTY, EXPRESSED OR IMPLIED.

fEATURES AND SPECIfICATIoNS

05/17