6-552-1 (PS10-34)
-
Upload
anderson-silva-brasil -
Category
Documents
-
view
221 -
download
0
Transcript of 6-552-1 (PS10-34)
-
7/31/2019 6-552-1 (PS10-34)
1/2
PRESSURE CONTROLS
PS10 -34 Sequence, Internal Pilot & Drain
DESCRIPTIONA screw-in, cartridge-style, direct-acting, spool-type, hydraulic sequence valve withinternal pilot and spring chamber drain.
OPERATIONIn its steady state, the PS10-34 blocks flow from to , with the spring chamberdrained at .
On attainment of a predetermined pressure at , the cartridge shifts to open to .
Note that back-pressure on adds to the spring setting value.
FEATURES Adjustments cannot be backed out of the valve.
Adjustments prohibit springs from going solid.
Optional spring ranges to 117.2 bar (1700 psi).
Hardened spool and cage for long life.
Industry common cavity.
RATINGSOperating Pressure: to 207 bar (3000 psi)
Sequence Pressure Max.: to 117 bar (1700 psi)
Flow: See Performance Chart
Internal Leakage: 82 cc/minute (5 cu. in./minute) max. to 85% of nominal setting
Standard Spring Ranges:
6.9 to 48.3 bar (100 to 700 psi);
20.7 to 117.2 bar (300 to 1700 psi)
Temperature: -40 to 120C with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1
Cavity Tool: CT10-3XX; See page 8.600.1Seal Kit: SK10-3X-BM; See page 8.650.1
USASI/ISO:
PERFORMANCE (Cartridge Only)
SYMBOLS
6.552.1
13.8/200
20.7/300
27.6/400
34.5/500
41.4/600
48.3/700
55.2/800
6.9/100
9.52.5
18.95.0
28.47.5
37.910.0
47.312.5
FLOW RATE lpm/gpm
PRESSURE
DROPbar/psi
56.815.0
Pressure Drop vs. Flow to ; 100700 psi Spring
Maximum Setting- - - - Minimum Setting
32 cSt/150 ssu oil at 40C
41.4/600
103.4/1500
110.3/1600
117.2/1700
124.1/1800
131.0/1900
137.9/2000
34.5/500
20.7/300
27.6/400
9.52.5
18.95.0
28.47.5
37.910.0
FLOW RATE lpm/gpm
PRESSURE
DROP
bar/psi
47.312.5
56.815.0
Pressure vs. Flow to ; 3001700 psi Spring
Maximum Setting- - - - Minimum Setting
32 cSt/150 ssu oil at 40C
HYDRAFORCE.com
Blue rectangles are links to other catalog pages.
http://../Techref/Ref-pdf/9-010-1.pdfhttp://../Techref/Ref-pdf/9-060-1.pdfhttp://../Techref/Ref-pdf/9-020-1.pdfhttp://../Techref/Ref-pdf/9-110-1.pdfhttp://../Acc-hous/Acc-pdf/8-600-1.pdfhttp://../Acc-hous/Acc-pdf/8-650-1.pdfhttp://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://../Techref/Ref-pdf/9-060-1.pdfhttp://www.hydraforce.com/http://../Techref/Ref-pdf/9-010-1.pdfhttp://../Techref/Ref-pdf/9-020-1.pdfhttp://../Techref/Ref-pdf/9-110-1.pdfhttp://../Acc-hous/Acc-pdf/8-600-1.pdfhttp://../Acc-hous/Acc-pdf/8-650-1.pdf -
7/31/2019 6-552-1 (PS10-34)
2/2
Setting in bars
(Blank) for Adjustable, orSpecify, for example:
M25 25 barM100 100 bar
Setting in psi
(Blank) for Adjustable, orSpecify, for example: 9.0 900 psi 16.0 1600 psi
Seals
Buna N (Std.) NFluorocarbon V
TO ORDER
Cartridge: Weight: 0.27 kg. (0.60 lbs.)Steel with hardened work surfaces.Zinc-plated exposed surfaces.Buna N O-rings and polyesterelastomerback-ups standard.Anodized aluminum knobsand caps.
Standard Ported Body: Weight:0.36 kg. (0.80 lbs.) Anodized
high-strength 6061 T6 aluminumalloy, rated to 240 bar (3500 psi).Ductile iron bodies available;dimensions may differ.See page 8.010.1
PS10-34__ - __ __ __ - __ - __ __ / __ __ __ __
Adjustment Option1/4 in. Hex Allen Head A
1-1/2 in. Dia. Alum Knob BOption A w/Cover Cap C
Factory Preset Non-Adjst. F
Factory Preset
Hidden Adjustment H Option C
w/Lockwire Holes L
DIMENSIONS
PortingCartridge Only 0
SAE 6 6T
SAE 8 8T
1/4 in. BSP* 2B
3/8 in. BSP* 3B
*BSP Body; U.K. Mfr. Only
PS10-34
6.552.2
Adjustable valves will bepreset to approx. 50% ofspring max. potential.
Spring Range
7 6.9 to 48.3 bar(100 to 700 psi)
17 20.7 to 117.2 bar(300 to 1700 psi)
HYDRAFORCE
HYDRAFORCE.com
MATERIALS
Blue rectangles are links to other catalog pages.
http://../Acc-hous/Acc-pdf/8-010-1.pdfhttp://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://www.hydraforce.com/http://../Acc-hous/Acc-pdf/8-010-1.pdf