5” S-Series HMIdc.winmate.com.tw/_downloadCenter/2016/Multi-touch PPC/5inch Q… · Go Refer to...

Please read these instructions carefully before using this product, and save this manual for future use.

5” S-Series HMI W05TA3S-PCT3AC

Quick Start Guide

V1.0

Document Part Number: 9152050I0000

Contents

Getting Started 2

Unpacking 3

Accessories 3

Description Of Parts 4

Connector Description 6

DC Input Connector 6

LAN (RJ45) Connector 6

USB A Type Connector 6

Digital Input / Output Connector 7

Turning On or Off 8

Turning ON 8

Turning OFF 9

Using Camera 10

Using Camera 10

Taking pictures 10

Opening the Gallery 11

TARS Test Application 12

Location and Interface 12

Testing LED Light Bar 13

Testing HF RFID Reader 14

HF RFID Reader Introduction 14

Scanning HF RFID Tag 14

Testing DIDO 15

Software Developer Support 16

Software System Diagram 16

Winmate Software Development Kit 16

Technical Specifications 17

HMI Device Specifications 17

HF RFID Reader Specifications 20

2 Please read these instructions carefully before using this product, and save this guide for future use.

Getting Started Congratulations on purchasing Winmate® 5” S-Series HMI. Interactive and smart

automation systems of intelligent buildings are in a fast growing phase. Winmate®

multi-touch S-Series HMI is suitable for home automation and room management

systems. Flat surface is easy-to-clean and delivers aesthetically pleasing look for

any interior. By connecting to centralized database, it can provide real time update

for booking status and available schedule, or perform as a synchronous display in

meetings.

Winmate® 5” S-Series HMI powered by TI Cortex® A8 AM3354 1GHz with DSP

processor and support Android 4.4 operating systems. The HMI device features P-

Cap touch-screen. In addition, the HMI device model supports an exceptional

feature - LED Light Bar. With the help of red, green, blue and orange LED

indicators you can see the status of the machine or processes afar. It significantly

reduces power consumption by keeping the display turned off.

Winmate® 5” S-Series HMI features:

TI Cortex A8 AM3354 1GHz with Android Operating System

Fanless cooling system and ultra-low power consumption

5'' WVGA TFT (LED backlight) with P-CAP touch screen

Gigabit LAN with PoE (IEEE 802.3AT) Solution

Built-in non-contact HF RFID Module

2MP front-facing camera for interactive communication

Multi-Color(G,R,B) Programmable LED Light Bar Indicator

Unidirectional-Mic and Speaker for VoIP application

Wide-distance (10M) RF controller for Digital Out device trigger application

All-in-one design, completed solution for cost-saving and space-saving

3

Unpacking Carefully remove the box and unpack your device. Please check if all the items

listed below are inside your package. If any of these items are missing or damaged

contact us immediately.

Accessories

Standard factory shipment list:

5” HMI Device Quick Start Guide

(Hardcopy) Power Cable

AC Adapter (12V/ 50W)

Terminal Block 3 pin


Description Of Parts Front Side:

Rear Side:

I/O Side:

Speaker

Kensington Lock

5” 800*480 LED panel with PCAP Touch Screen

2MP Camera

Mic

RFID Reader

LED Light bar

5

Dimensions:

SD Card Slot

DC 12V in Digital I/O LAN / PoE

Backlight Switch Button

USB A Type


Connector Description

DC Input Connector

DC terminal block power source input is a 3-pin terminal block that has to be

secured with screws to the HMI device housing

LAN (RJ45) Connector

The 5” S-Series HMI supports one 10/100/1000 Mbps Ethernet interface for connecting to the internet.

USB A Type Connector

Use USB A Type (USB2.0) connector to connect your HMI device to other

USB2.0 compatible devices.

Pin No. Symbol Description

1 VIN+ 12V DC Input +

2 VIN- 12V DC Input -

3 GND Ground

Voltage

Minimum Voltage 11.4V Maximum Voltage 12.6V Maximum Current 4.2A

Pin № Name Pin № Name

1 TX1+ 2 TX1-

3 TX2+ 4 TX2-

5 TX3+ 6 TX3-

7 TX4+ 8 TX4-

Pin № Name Pin № Name

1 +5V 2 Data-

3 Data+ 4 GND

7

Digital Input / Output Connector

Digital Input and Output 2 in / 2 out (one 12V/1A for electromagnetic lock).

Go Refer to Testing DIDO section in this guide to test the DIDO functions.

Pin №

Name Pin №

Name

1 GND 2 DO0

3 DO1 4 DO_COM

5 DI0 6 DI1

7 GND

Voltage

Digital output:

Open drain to 40V ; Maximum load 2.0A

Digital input:

Level 0: close to GND; Level 1: 2.5~12V


Turning On or Off

Turning ON

Follow the following steps to turn on your device:

1. Connect the power cable to AC to DC adapter.

2. Connect the open wire of AC to DC adapter to the terminal block female connector and tighten the screws to secure it to the HMI device.

3. Connect the terminal block female connector to the device's male connector.

4. Plug the power cord to the AC outlet and the device will turn on automatically.

CAUTION

Use only the AC adapter included in your package

(Rating: Output 4.2 A). Using other AC adapters may damage the

device.

ALTERNATING CURRENT This product must be grounded. Use only a grounded AC outlet. Install the additional PE ground wire if the local installation regulations require it.

9

Turning OFF

Remove the power input to shut down the device.

Press the reset button to reboot the HMI device.

Reset Button


Using Camera Winmate® 5” S-Series HMI has a built-in front camera, which allows you to take

photos and record video clips.

Using Camera

1. Tap the launcher and then tap Camera .

Camera opens in Portrait mode, ready to take a picture or shoot a video.

Taking pictures

1. Tap the launcher and then tap Camera .

2. Tap button to start or stop recording.

The photos or video can be previewed in the preview window.

If you want play the video you have recorded, go into the video player

and select the video you want to play.

If you want to view photos, select the picture viewer and choose which

photos you want to see.

3. Tap button to change shooting mode.

4. Tap button to change camera setting such as exposure and so on.

11

Opening the Gallery

1. Tap the launcher and then tap Gallery .

2. Tap a folder to view the pictures or video inside in full screen mode.

3. Flick the pictures left or right to view the previous or next pictur


TARS Test Application The HMI device comes with pre-installed application – “TARS Test” for testing main

features such as LED Light Bar, DIDO and HF RFID.

Location and Interface

To open the application, go to all APPS menu, then tap TARS Test icon.

TARS Test Application Interface

13

Testing LED Light Bar

The 5” S-Series HMI equipped with LED Light Bar located on the bottom front side

of the device. Users can test this feature with TARS Test APP developed by

Winmate.

1. Go to all APPS menu, then tap TARS Test icon.

2. User can test Red, Green and Blue Light Bar duty level.

Tap the arrow to the right to increase light intensity.

Tap the arrow to the left to decrease light intensity.


Testing HF RFID Reader

HF RFID Reader Introduction

HF RFID is an initial of Radio Frequency Identification, which is also called

electrical tag. The principle of RFID is to tag the target by radio frequency and

process the data reading and transporting instead of mechanic and optical

contact. HF RFID system consists of the hardware and software. The hardware

part includes the HF RFID tag and reader, and software part includes its

application system. HF RFID is commonly used for ticketing, payment, access

control and data transfer applications.

The RFID Reader is located on the bottom right front side of the HMI device.

The RFID’s frequency of electrical tag is 13.56 MHz.

Scanning HF RFID Tag


15

2. While TARS Test application is open, bring a card close to the RFID icon on the front side of the HMI device.

Number Description

XXXXXXXXXXXXXABCDEF Displays the information written in the

card

Testing DIDO


2. In the TARS Testing window, see DIDO.


Software Developer Support

Software System Diagram

This diagram describes the software system of Winmate® 5” S-Series HMI.

Winmate Software Development Kit

Winmate® provides Software Development Kit (SDK). The table below lists SDK

provided by Winmate for 5” S-Series HMI.

Devices Support

RFID Reader Not Necessary (Baud rate 9600,8N1 and giving a ASCII string)

DI/DO 4DI,4DO are controlled by Linux file system code

WebCAM Standard UVC

LCD Backlight

Control

Test AP- Winmate source code reference

UART Software switch to RS232/422/485

To find Drivers and SDK, please refer to the Driver CD that comes in the package

or contact us.

17

Technical Specifications

HMI Device Specifications

Model Name

W05TA3S-PCT3AC

Display Specification

Size 5” TFT (LED Backlight)

Pixel Pitch 0.045 (H) x 0.135 (V)

Resolution 800 x 480

Luminance

( ) 300 (typ.)

Contrast Ratio 500 : 1 (typ.)

Viewing Angle -70~70(H),-50~70(V)

Touch PCAP Multi-Touch support 5 points

System Specification

CPU TI Cortex® A8 AM3354 1GHz with DSP

Memory 512MB DDR2 SDRAM 533MHz

Graphics PowerVR SGX 3D Gfx

Storage 1GB 8bit Nand Flash (OS)

Operating System

Android 4.4.2

I/O Connectors

DC-Input 1 x Phoenix Type Power Jack

Ethernet 1 x RJ 45 10/100/1000 (Support PoE function IEEE 802.3at)

Reset Button 1 x Reset Button with Blue LED indicator

Expansion Storage

1 x Micro SD Card Slot (with 16GB SD card)

Digital I/O 2 in / 2 out (one 12V/1A for

electromagnetic lock)

Peripheral

Camera 2 MP front-facing camera

RFID (HF, 13.56MHz)

Supporting 14443A , ISO 15693 / ISO18092, 3cm (Maximum Reading Range)

RF Remote Control

443MHz RF module with controller ,10M (Maximum Active Range)

Audio Input MIC (Uni-directional)

Audio Output 1Watt Speaker

LED Light Bar Indicator

RGB multi-color

Power Management

Power Input 12V DC-in Power input (Phoenix type)

Power Over Ethernet

Support IEEE 802.3at (25W)


Power Consumption

10W (w/o DIDO Device)

Mechanical Specifications

Dimensions (W x L x H)

138 x 138 x 29 mm

Mounting VESA Mount (75 x 75 mm)

Cooling System Fanless design

Environmental Considerations

Operating Temp. 0°C ~ +55°C

Humidity 10% ~ 90% (non-condensing, RH)

IP Proof IP54 (Front side)

19

HF RFID Reader Specifications

HF RFID Reader Specifications

Part Number RF-521

RF Transmit Frequency 13.56MHz

F/W version V1.00B / V1.03

Supported Transponder ISO 15693 (R/W) ISO 14443-A( R/W) ISO 14443-B (Read UID) ISO18092 (R/W)

Power Supply DC 5V

Power Consumption Operating: 80mA (max) Standby: 4mA

Communication Protocol The Nation standard UART format

Operating Temperature -20°C to + 85°C

Storage Temperature -20°C to + 85 °C

Storage Humidity 5 ~ 97% non-condensing

Dimensions (Unit : mm) 31 x 21.5 x 5.3 ( L x W x H )

Weight 2g (around)

ANT-4424 Specifications

Part Number ANT-4424-WM-IPX40

Antenna impedance 50 ohm @13.56MHz

Operating Temperature -20°C to + 85°C

Storage Temperature -20°C to + 85°C

PCB Dimensions L: 44mm x W: 24mm x H: 1.0mm

CN1 Connector Cable MHF Connector MINI 1.13 Coaxial Cable 40mm

Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, Taipei 241, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: [email protected] Official website: http://www.winmate.com.tw

http://www.winmate.com.tw/

5” S-Series HMIdc.winmate.com.tw/_downloadCenter/2016/Multi-touch PPC/5inch Q… · Go Refer to...

Documents

Transcript of 5” S-Series HMIdc.winmate.com.tw/_downloadCenter/2016/Multi-touch PPC/5inch Q… · Go Refer to...