5922.pdf
2
Product Description Sheet Research, Development & Engineering Product 5922 Tallaght Business Park, Dublin, Ireland October 2001 NOT FOR PRODUCT SPECIFICATIONS. THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY. PLEASE CONTACT LOCTITE CORPORATION QUALITY DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS ON SPECIFICATIONS FOR THIS PRODUCT. ROCKY HILL, CT FAX: +1 (860)-571-5473 DUBLIN, IRELAND FAX: +353-(1)-451 - 9959 Loctite is a Trademark of Loctite Corporation U.S.A . PRODUCT DESCRIPTION LOCTITE ® Product 5922 is a black, viscous paste with a characteristic alcohol odour. It is a slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent ev aporation. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals. PRODUCT BENEFITS · Improves reliability · Extends gasket life · Stops leakage · Excellent for metal to metal assemblies · Slow drying · Flexible setting TYPICAL APPLICATIONS · Valve cover gaskets · Oil pan gaskets · Threaded connections · Cover plates · Hose connections DIRECTIONS FOR USE 1. Remove all pr evi ous mate rial from mating s urf ace s. 2. For best results, clean and dry all s urf ace s wi th a residue-free solvent 3. Remove c ap, pu nct ure t ube or c artr idg e sea l and at tac h extension nozzle (if provided). 4. When use d as a gask et dr ess ing , spr ead prod uct w ith a spatula to a uniform film on one side of gasket and then position it on the assembly. Coat the second side of gasket and re-assemble. Slower drying formula increases work time. 5. Assembly i s ope rat ional af ter 4 ho urs , ful l cur e is affected after 24 hours. For Cleanup 1. The product c an be r emo ved f rom meta l sur fac es with isopropyl alcohol. If the sealant has been dried for a long time or at high temperatures, cover the sealant with alcohol and allow to soften overnight. 2. Cl ean hands with hand cl eaners. PROPERTIES OF UNCURED MATERIAL Typical Value Chemical Type Modified resin, fillers & al cohol Appearance Black paste Odour Alcohol ic Specific Gravity 1.5 Viscosity Flow similar to molasses Flash Point Does Not Apply TYPICAL CURING PERFORMANCE Loctite Ò Product 5922 once applied, develops a flexible sealant by solvent evaporation. Dry times will vary with temperature, humidity and gap. PERFORMANCE OF CURED MATERIAL Withstands pressures to 34 MPa TYPICAL ENVIRONMENTAL RESISTANCE Temperature Resistance Typical Values Continuous, °C (°F) -54 to 204 (-65 to 400) Chemical / Solvent Resistance The product retains effective properties in contact with water, ethylene glycol, gasoline, motor oil, transmission fluid and sea water. GENERAL INFORMATION This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidising materials. For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). Storage Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 ° to 28°C (46° to 82°F) unless otherwise labelled. Optimal storage is at the lower half o f this temperature range. To prevent c ontamination of unused product, do not return any material to its original container. For specific shelf-life information, contact your local Technical Service Centre. Note The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user's respons ibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Loctite Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Loctite Corporation’s products. Loctite Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Loctite Corporation patents that may cover such proce sses or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may b e covered by one or more United States or foreign patents or patent applications.
Transcript of 5922.pdf
7/30/2019 5922.pdf
http://slidepdf.com/reader/full/5922pdf 1/1
Product Description SheetResearch, Development & Engineering Product 5922Tallaght Business Park,Dublin, Ireland October 2001
NOT FOR PRODUCT SPECIFICATIONS.THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT LOCTITE CORPORATION QUALITY DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS ON SPECIFICATIONS FOR THIS PRODUCT.ROCKY HILL, CT FAX: +1 (860)-571-5473 DUBLIN, IRELAND FAX: +353-(1)-451 - 9959
Loctite is a Trademark of Loctite Corporation U.S.A.
PRODUCT DESCRIPTION
LOCTITE®
Product 5922 is a black, viscous paste with acharacteristic alcohol odour. It is a slow drying, flexible settingpaste that changes to a pliable, non-hardening film throughsolvent evaporation. It seals flanges, fittings, connections andflexible assemblies against leakage. It increases the reliability of gasket seals.
PRODUCT BENEFITS
· Improves reliability
· Extends gasket life
· Stops leakage
· Excellent for metal to metal assemblies
· Slow drying
· Flexible setting
TYPICAL APPLICATIONS
· Valve cover gaskets
· Oil pan gaskets
· Threaded connections
· Cover plates
· Hose connections
DIRECTIONS FOR USE1. Remove all previous material from mating surfaces.2. For best results, clean and dry all surfaces with a
residue-free solvent3. Remove cap, puncture tube or cartridge seal and attach
extension nozzle (if provided).
4. When used as a gasket dressing, spread product with aspatula to a uniform film on one side of gasket and thenposition it on the assembly. Coat the second side of gasket and re-assemble. Slower drying formulaincreases work time.
5. Assembly is operational after 4 hours, full cure isaffected after 24 hours.
For Cleanup1. The product can be removed from metal surfaces with
isopropyl alcohol. If the sealant has been dried for along time or at high temperatures, cover the sealant withalcohol and allow to soften overnight.
2. Clean hands with hand cleaners.
PROPERTIES OF UNCURED MATERIALTypical Value
Chemical Type Modified resin, fillers & alcohol Appearance Black pasteOdour AlcoholicSpecific Gravity 1.5Viscosity Flow similar to molassesFlash Point Does Not Apply
TYPICAL CURING PERFORMANCE
LoctiteÒ Product 5922 once applied, develops a flexible sealantby solvent evaporation. Dry times will vary with temperature,humidity and gap.
PERFORMANCE OF CURED MATERIAL
Withstands pressures to 34 MPa
TYPICAL ENVIRONMENTAL RESISTANCETemperature Resistance Typical Values
Continuous, °C (°F) -54 to 204 (-65 to 400)
Chemical / Solvent ResistanceThe product retains effective properties in contact with water,ethylene glycol, gasoline, motor oil, transmission fluid and seawater.
GENERAL INFORMATIONThis product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selected as a
sealant for chlorine or other strong oxidising materials.
For safe handling information on this product, consult theMaterial Safety Data Sheet, (MSDS).
StorageProducts shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8° to 28°C
(46° to 82°F) unless otherwise labelled. Optimal storage is at thelower half of this temperature range. To prevent contaminationof unused product, do not return any material to its originalcontainer. For specific shelf-life information, contact your localTechnical Service Centre.
NoteThe data contained herein are furnished for information only andare believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have nocontrol. It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned hereinand to adopt such precautions as may be advisable for theprotection of property and of persons against any hazards thatmay be involved in the handling and use thereof. In light of theforegoing, Loctite Corporation specifically disclaims allwarranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arisingfrom sale or use of Loctite Corporation’s products. LoctiteCorporation specifically disclaims any liability for consequential or incidental damages of any kind, including
lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that theyare free from domination of patents owned by others or as alicense under any Loctite Corporation patents that may cover such processes or compositions. We recommend that eachprospective user test his proposed application before repetitiveuse, using this data as a guide. This product may be covered byone or more United States or foreign patents or patentapplications.
