5419_ETN-40-eng-Rev1
1
ETN-40 16 Optoisolated Digital Inputs and 16 Relays Outputs Tecnint HTE S.r.l. - Via della Tecnica 23875 Osnago (LC) - Tel. 039.5969100 Fax 039.5969124 Email: [email protected] DSE.ETN-40.REV 1 The ETN-40 is a distributed ETN slave module, with 16 optoisolated digital inputs, active at 24 V DC or GND, and with 16 relays outputs. It is completely managed by an ETN master controller. The ETN-40 receives the state of the 16 digital outputs from the master controller and sends it back the 16 digital inputs state. Technical data Power supply • 24V DC ± 25%, 500 mA ETN Interface • Slave, optoisolated • Baud rate up to 6 Mbit/s, (option 12 Mbit/s) Address selection • 1÷255 by rotary switch Digital Inputs • 16 optoisolated digital inputs, active at 24 V DC or GND; selection in group of 4 by common signal • Protection by Transguard 30 V • Input current 10 mA, 24 V • Switching threshold 9 V • Max input voltage 30 V • Anti-Debounce circuit Digital Outputs • 16 relays outputs • Watchdog circuit • Protection by varistors 250 V (optional) Mechanical relays • Plastic sealed construction, contact N.O. • Max. current 8A • Max. switching voltage 250V Leds • POWER • BUS FAULT • 1÷16 input state • 1÷16 output state Module protection • By filter and microfuse, 630 mA Connectors • Male, Phoenix Contact Combicon like Working temperature • From 0ºC to +70ºC Warehouse temperature • From -25ºC to +85ºC Relative humidity • From 10% to 90% without condensation Case • Plastic case, class V.0, for DIN guide Dimensions • 210 x 115 x h60 mm Order code • ETN-40 (16 DI + 16 relays, standard) • ETN-40/B (16 DI + 16 sockets for relays) • ETN-40/V (16 DI + 16 relays protected by varistors) ETN ® Line
-
Upload
hormiganegra431 -
Category
Documents
-
view
298 -
download
17
description
Bottero Glass Machine
Transcript of 5419_ETN-40-eng-Rev1
-
ETN-40 16 Optoisolated Digital Inputs and 16 Relays Outputs
Tecnint HTE S.r.l. - Via della Tecnica 23875 Osnago (LC) - Tel. 039.5969100 Fax 039.5969124 Email: [email protected] DSE.ETN-40.REV 1
The ETN-40 is a distributed ETN slave module, with 16 optoisolated digital inputs, active at 24 VDC or GND, and with 16 relays outputs. It is completely managed by an ETN master controller. The ETN-40 receives the state of the 16 digital outputs from the master controller and sends it back the 16 digital inputs state.
Technical data Power supply 24VDC 25%, 500 mA ETN Interface Slave, optoisolated
Baud rate up to 6 Mbit/s, (option 12 Mbit/s) Address selection 1255 by rotary switch Digital Inputs 16 optoisolated digital inputs, active at 24 VDC or GND; selection in
group of 4 by common signal Protection by Transguard 30 V Input current 10 mA, 24 V Switching threshold 9 V Max input voltage 30 V Anti-Debounce circuit
Digital Outputs 16 relays outputs Watchdog circuit Protection by varistors 250 V (optional)
Mechanical relays Plastic sealed construction, contact N.O. Max. current 8A Max. switching voltage 250V
Leds POWER BUS FAULT 116 input state 116 output state
Module protection By filter and microfuse, 630 mA Connectors Male, Phoenix Contact Combicon like Working temperature From 0C to +70C Warehouse temperature From -25C to +85C Relative humidity From 10% to 90% without condensation Case Plastic case, class V.0, for DIN guide Dimensions 210 x 115 x h60 mm Order code ETN-40 (16 DI + 16 relays, standard)
ETN-40/B (16 DI + 16 sockets for relays) ETN-40/V (16 DI + 16 relays protected by varistors)
ETN
L
ine
