5.382198_A4-P________1.0_EN

5.382198

Ramliya 2Kiln/Raw MillParts list forElectrostatic Precipitator1F400/H2P1/3x40-1x128150/1K/1K/L2DAccess facilities

The information transmitted by this document is the proprietary and confidential property of FLSmidth,and may not be duplicated, disclosed, or utilized without written consent from FLSmidth.

Electrostatic Precipitator Parts list PageAccess facilitiesPart list structure 5.382198 No. 1

A) The parts list consists of:A Front page showing the name of the plant and the precipitator described.A page containing this explanationA contents listA page containing survey of revisionsIn some partslists the following pages may appear:

A page containing a list of welding electrodes for erection.A page containing a list of instructions for client and erectionA page containing a list of special drawings for client and erection.

The remaining pages are numbered main sheets with the actual contents of the parts list.The last pages can be a list of suppliers of certain parts and a list of spare parts.

B) The parts list specifies: Position Numbers, quantity, designation and data, drawing or parts list number,material, weight, and grouping of supply for each of the components of the precipitator.

C) Column 1: The position numbers are the "main key" to the parts list. Each component has a unique pos.No., which corresponds to that shown on the assembly drawings, showing the physical position of thesub-parts list. Each component is normally an erection unit, which is described by means of a drawing ora supplier if nothing else is specified.The components are grouped corresponding to the physical main groups of the precipitator, each havingan assembly drawing, mentioned first in each group. The assembly drawings etc. are also given a pos.no. making reference to the drawing possible.

Column 2: "Quantity" shows the necessary number of each component to be used for 1 off the type of precipitator described on the front page in the precipitator code. If a component is described by meansof a sub-parts list, "Quantity" describes the number of times the sub-parts list is to be repeated.

Column 3: States the designation of the components. Further, it describes the numerical valuescorresponding to a row of letters for some of the components. This is the key to the marking ofdimensions on the relevant drawing, which is filled in with letters. This means that the drawing mightoften seen to be out of proportion, and it might for instance show more stiffening irons, holes, etc. thanthe dimensions indicate. In all cases the dimensions stated must be followed.

Column 4: States drawing numbers and sub-parts list numbers.

Column 5: Material code referring to FLS material data sheets. If several different materials are requiredin a component, the code for the main material is named. For a full material specification refer to thedrawing or the sub-parts list.Main material designation may differ between drawing and parts list. In that case the parts listdesignation must be used.

Column 6: States the weight of the total amount of each component. The weight is normally rounded off to a whole number of kilos.

Column7: "Doc. for or Supply from" explains who is going to receive drawings (1) and explains thegrouping of the supply for the goods (2). It is implied that all suppliers of goods also receive drawings.

D) At the foot of each parts list sheet is a space for remarks for one or more pos. nos.

E) Bolts, screws, fittings etc. are stated by a code number referring to a folder No. 7.000001 named "Codefor parts to be purchased".

Rev. Designed Date Checked Date Approved Date0 KAMO 27/11/2008 SGVI 27/11/2008 HFR 27/11/2008

Rev. in pos. no.:The information transmitted by this document is the proprietary and confidential property of FLSmidth,and may not be duplicated, disclosed, or utilized without written consent from FLSmidth.FileId

Electrostatic Precipitator Parts list PageAccess facilitiesContents 5.382198 No. 2

Sections PagePart list structure 1Contents 2Survey of revisions 3Standard details, railing. 4Standard details, grating 5Gangway 6Railing for gangway 7Railing on roof 8Grating 9Bolt, nut and washer 10Supplier of Baspak asbestos-free plt. 11

Total number of pages, excluding front page: 11


Rev. in pos. no.:The information transmitted by this document is the proprietary and confidential property of FLSmidth,and may not be duplicated, disclosed, or utilized without written consent from FLSmidth.FileId

Electrostatic precipitator Parts list PageAccess facilitiesSurvey of revisions 5.382198 No. 3

Version Pages, changed, added or removed in this version Inits. Date

1 Original KAMO 27-nov-08

The information transmitted by this document is the proprietary and confidential property of FLSmidth,and may not be duplicated, disclosed, or utilized without written consent from FLSmidth.FileId

Electrostatic Precipitator Parts list PageAccess facilitiesStandard details, railing. 5.382198 No. 4

Welding details for railing.The supplier can choose between design A and design B, but the same design has to be used the whole project.

Radius of bendings.The bendings can be made by welding-bends or with a bending-radius between 50-120mm.The radius chosen has to be the same for each pipe-dimention for the whole project.


Rev. description.:

Electrostatic Precipitator Parts list PageAccess facilitiesStandard details, grating 5.382198 No. 5

Grating used in this parts list:

The supplier can choose between grating type P and type SP, but the same type has to be usedfor the whole project.


Rev. description.:

Electrostatic Precipitator Parts list PageAccess facilitiesGangway 5.382198 No. 6

Pos. Quantity Designation & Dwg no. / Mat. Total *)Doc. for orNo. code and / or dimensions Parts list no. code kgs. Supply from

101 Erection drawing 1.492453 1.Erection co.1.Supervisor

104 6 Support for gangway 3.155354 1100 204 2.BSDa=170 b=1030h1=HE120B

105 6 Bracket 3.155353 1100 51 2.BSD106 6 Angle Hinge 3.137117 1100 14 2.BSD107 6 Insulation for support 4.110596 x) 5 2.BSD108 1 Gangway 2.170683 1100 427 2.BSD

a=850 b=180c=250 d=1130u1=UNP140

109 1 Gangway 2.170689 1100 427 2.BSDa=850 b=180c=250 d=1130u1=UNP140

110 1 Gangway 2.170686 1100 380 2.BSDa=850u1=UNP140

Total weight this page 1508 kgs*) 1 = Receiver of erection and maintenance documentation, 2 = Supplier of the components.x) Remarks to pos. No.:107: Baspak 'S' plate or similar material used for packing without asbestos fibres (min 500 Deg.C).Refer last page for supplier detail.


Rev. in pos. No.:The information transmitted by this document is the proprietary and confidential property of FLSmidth,and may not be duplicated, disclosed, or utilized without written consent from FLSmidth.PageId

Electrostatic Precipitator Parts list PageAccess facilitiesRailing for gangway 5.382198 No. 7


120 2 Railing 3.137112 1100 104 2.BSDa=705 b=705ø1=48.3x3.25ø2=26.9x2.65





Total weight this page 644 kgs*) 1 = Receiver of erection and maintenance documentation, 2 = Supplier of the components.x) Remarks to pos. No.:



Electrostatic Precipitator Parts list PageAccess facilitiesRailing on roof 5.382198 No. 8


201 2 Railing on roof, Design A 3.137140 1100 200 2.BSDa=1075 b=6450c=225 n=6ø1=48.3x3.25ø2=26.9x2.65

202 2 Railing on roof, Design B 3.137140 1100 200 2.BSDa=1075 b=6450c=225 n=6ø1=48.3x3.25ø2=26.9x2.65

203 6 Railing on roof 3.137137 1100 560 2.BSDa=965 b=5790n=6ø1=48.3x3.25ø2=26.9x2.65

Total weight this page 960 kgs*) 1 = Receiver of erection and maintenance documentation, 2 = Supplier of the components.x) Remarks to pos. No.:



Electrostatic Precipitator Parts list PageAccess facilitiesGrating 5.382198 No. 9


401 2 Grating x) 1100 21 2.BSDDIN 24537-SP(P)-30T1470x250




413 80 Safety fittings for grating 1100 14 2.BSD

Total weight this page 563 kgs*) 1 = Receiver of erection and maintenance documentation, 2 = Supplier of the components.x) Remarks to pos. No.:401- 404: Refer page 5 of parts list, hot dip galvanised.



Electrostatic Precipitator Parts list PageAccess facilitiesBolt, nut and washer 5.382198 No. 10


501 132 Bolt x) 7 2.BSD0213.M12x45

502 132 Nut x) 2 2.BSD0113.M12

503 264 Washer x) 2 2.BSD0700.M12

504 24 Bolt x) 3 2.BSD0213.M16x55

505 24 Nut x) 1 2.BSD0113.M16

506 48 Washer x) 1 2.BSD0700.M16

Total weight this page 16 kgs*) 1 = Receiver of erection and maintenance documentation, 2 = Supplier of the components.x) Remarks to pos. No.:501-506: Hot dip galvanised.



Electrostatic precipitator Parts list PageAccess facilitiesSupplier of Baspak asbestos-free plt. 5.382198 No. 11

Forhandler af Baspak asbestfri pladerSupplier of Baspak asbestos-free platesBaspak asbestfreie Platten-VerhandlungRevendeur de Baspak plaques sans amianteDistribuidor de BaspakRevendedor de Baspak

Denmark ("Baspak")

Firma Burcharth & Søn A/SEgegårdsvej 5, 5260 OdenseTelex: 59766 buroil dk - tel.: 66119966

Sweden ("Baspak S" or "Danpak")

S. Lövenkjär ABPostbox 65, 28040 Skånes FagerhultTlf. : 433-30270

Belgium ("Cerpak")

Keramab S.A.Turnhoutsbaan 217, 2100 Deurne - AntwerpenTelex: 31901 - tlf.: 31247015

Germany ("Baspak S" or "Danpak")

RexPostfach 540, 7170 Schwäbisch HallTelex: 74827 - tlf.: 791-2166

France ("Cerpak")

Ceram76, rue de Tournai, 59780 BaisieuxTelex: 130974 - tlf.: 20-3496-99

Netherlands ("Cerpak")

Selanco bvJames Wattweg 24, 3130 ba VlaardingenTelex: 23416 - tlf.: 010-356788

England ("Cerpak")

Witty and Wyatt Gasket Ltd.High Road 895, Chadwell HeathRomford RM6 4HL, EssexTlf.: 015993971


Rev. description.:Baspak

5.382198_A4-P________1.0_EN

Documents

Transcript of 5.382198_A4-P________1.0_EN