Rockwell Automation Support Center

509821 - PowerFlex 753 and 755 drive: AOP for non-CIP driveAccess Level: EveryoneDate Created: 10/24/2012 09:44 AMLast Updated: 10/22/2013 04:14 AM

QuestionAfter the installation of the latest RSLogix 5000 AOP for non-CIP drive, you could have the following problems:

Not able to choose the right revision of drive in Module Definition1.PowerFlex 755 High Power Drive shown as in the I/O Configuration2.

Opening the properties of the Unknown module, you get the following error message:

Failed to Create Module Profile.Module Profile Not Installed.Error 8609-0

What can I do in this situation?

AnswerInstalling the latest RSLogix 5000 Drive Add-On Profiles (non CIP Motion) will allow RSLogix 5000 to be able to add the module profile of the drive under I/O Configurationespecially newly released drives or communication modules.

Once completed the AOP installation, be sure that also the Drive Database installed in your PC is the right one. Go to ALLEN-BRADLEY WEB UPDATES, click on eitherPowerFlex 753 or PowerFlex 755 which are under PowerFlex 750-Series Drives -> DriveTools SP / RSLogix5000 Drive Database Files -> click on the Drive Firmware and itwill install automatically.

Note: If the firmware revision still not available after the particular AOP of the drive firmware has been installed, try to close the RSLogix 5000 and start again, make sure theDrive Communication Server and Drive Database Server also have been shut down too.

Figure 1. Drive Communication Server icon found on the Task Bar

Figure 2. Drive Database Server icon found on the Task Bar

Comments (0)This answer has no comments

Post a Comment

Product Tree for This Answer (expand/collapse)

DISCLAIMERThis knowledge base web site is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects.Accordingly, the information in this web site is not intended to constitute application, design, software or other professional engineering advice or services. Before making anydecision or taking any action, which might affect your equipment, you should consult a qualified professional advisor.

509821 PowerFlex 753 and 755 drive: AOP for non-CIP drive https://rockwellautomation.custhelp.com/app/answers/detail/a_id/509821

1 de 2 06/03/2014 22:29

ROCKWELL AUTOMATION DOES NOT WARRANT THE COMPLETENESS, TIMELINESS OR ACCURACY OF ANY OF THE DATA CONTAINED IN THIS WEB SITE ANDMAY MAKE CHANGES THERETO AT ANY TIME IN ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TOUSERS "AS IS." IN NO EVENT SHALL ROCKWELL BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL,LOSS PROFIT OR DAMAGE, EVEN IF ROCKWELL AUTOMATION HAVE BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

ROCKWELL AUTOMATION DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED IN RESPECT OF THE INFORMATION (INCLUDING SOFTWARE)PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, AND NON-INFRINGEMENT. Note thatcertain jurisdictions do not countenance the exclusion of implied warranties; thus, this disclaimer may not apply to you.

This page is best viewed in Internet Explorer 7, Firefox 3.5, Chrome 4, Safari 4 or newer.

509821 PowerFlex 753 and 755 drive: AOP for non-CIP drive https://rockwellautomation.custhelp.com/app/answers/detail/a_id/509821

2 de 2 06/03/2014 22:29