5047B_LA05

Lab Answer Key for Module 5: Managing E-Mail Addresses and Address Lists

Table of Contents Lab 1: Managing E-Mail Addresses and Address

Lists 1 Exercise 1: Managing E-Mail Address Policies 1 Exercise 2: Managing Address Lists 3 Exercise 3: Performing Recipient Bulk

Management Tasks 6

Information in this document, including URL and other Internet Web site references, is subject to change

without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-

mail addresses, logos, people, places, and events depicted herein are fictitious, and no association with any

real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or

should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting

the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval

system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or

otherwise), or for any purpose, without the express written permission of Microsoft Corporation.

Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights

covering subject matter in this document. Except as expressly provided in any written license agreement from

Microsoft, the furnishing of this document does not give you any license to these patents, trademarks,

copyrights, or other intellectual property.

The names of manufacturers, products, or URLs are provided for informational purposes only and Microsoft

makes no representations and warranties, either expressed, implied, or statutory, regarding these

manufacturers or the use of the products with any Microsoft technologies. The inclusion of a manufacturer or

product does not imply endorsement of Microsoft of the manufacturer or product. Links may be provided to

third party sites. Such sites are not under the control of Microsoft and Microsoft is not responsible for the

contents of any linked site or any link contained in a linked site, or any changes or updates to such sites.

Microsoft is not responsible for webcasting or any other form of transmission received from any linked site.

Microsoft is providing these links to you only as a convenience, and the inclusion of any link does not imply

endorsement of Microsoft of the site or the products contained therein.

© 2008 Microsoft Corporation. All rights reserved.

Microsoft, Microsoft Press, Active Directory, ActiveSync, BizTalk, ForeFront, Internet Explorer, Outlook,

PowerPoint, SharePoint, Visual Studio, Windows, Windows Mobile, Windows NT, Windows PowerShell, and

Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

All other trademarks are property of their respective owners.

Version 1.0

Lab Answer Key for Module 5: Managing E-Mail Addresses and Address Lists 1

Lab 1: Managing E-Mail Addresses and Address Lists

Exercise 1: Managing E-Mail Address Policies

Task 1: Add adventure-works.com as an accepted domain

1. Log on SYD-DC1 as Administrator with a password of Pa$$w0rd.

2. Click Start, point to All Programs, click Microsoft Exchange Server 2007, and

then click Exchange Management Console.

3. In the console tree, expand Organization Configuration, and then click Hub

Transport.

4. Click the Accepted Domains tab.

5. In the action pane, click New Accepted Domain.

6. In the Name box, type Adventure Works.

7. In the Accepted Domain box, type adventure-works.com.

8. Click New to accept the default of an authoritative domain.

9. Read the Completion information, and then click Finish.

Task 2: Create an e-mail address policy for Adventure Works users

1. Click the E-mail Address Policies tab.

2. In the action pane, click New E-mail Address Policy.


4. Click The following specific types, select Users with Exchange mailboxes, and

then click Next.

5. In the Step 1: Select conditions box, select Recipient is in a Company.

6. In the Step 2: Edit the condition(s) box, click the specified link.

7. Type Adventure Works, click Add, and then click OK.

8. Click Next.

9. In the E-mail Addresses page, click Add.

10. In the SMTP E-mail Address dialog box, click First name.last name (john.smith).

Click Select accepted domain for e-mail address, and then click Browse.

11. Click Adventure Works, and then click OK twice.

12. Click Next.

13. Click Next to apply the e-mail address policy immediately.

2 Lab Answer Key for Module 5: Managing E-Mail Addresses and Address Lists

14. Read the Configuration Summary, and then click New to create and apply the

e-mail address policy.

15. Read the Completion Summary, and then click Finish.

Task 3: Add alpineskihouse.com as an accepted domain

1. In the action pane, click New Accepted Domain.

2. In the Name box, type Alpine Ski House.

3. In the Accepted Domain box, type alpineskihouse.com.

4. Click New to accept the default of an authoritative domain.


Task 4: Create an e-mail address policy for the Alpine Ski House users

1. Click the E-mail Address Policies tab.

2. In the action pane, click New E-mail Address Policy.


4. Click The following specific types, select Users with Exchange mailboxes, and

then click Next.

5. In the Step 1: Select conditions box, select Recipient is in a Company.

6. In the Step 2: Edit the condition(s) box, click the specified link.

7. Type Alpine Ski House, click Add, and then click OK.

8. Click Next.

9. In the E-mail Addresses page, click Add.

10. In the SMTP E-mail Address dialog box, click First name.last name (john.smith).

Click Select accepted domain for e-mail address, and then click Browse.

10. Click Alpine Ski House, and then click OK twice.

11. Click Next.

12. Click Next to apply the e-mail address policy immediately.

13. Read the Configuration Summary, and then click New to create and apply the

e-mail address policy.



Task 5: Modify the default e-mail address policy for A. Datum users

1. In the result pane, double-click Default Policy.

2. Click Next twice to access the E-mail Addresses page.

3. Click Add, and then click First name.last name (john.smith).

4. Click Select accepted domain for e-mail address, and then click Browse.

5. Click Adventure Works, and then click OK twice.

6. Click Add, and then click First name.last name (john.smith)..

7. Click Select accepted domain for e-mail address, and then click Browse.

8. Click Alpine Ski House, and then click OK twice.

9. Click Next.

10. If necessary, click Immediately, and then click Next.

11. Read the Configuration Summary, and then click Edit.


Task 6: Verify that addresses were applied to A. Datum users

1. In the console tree, expand Recipient Configuration, and then click Mailbox.

2. In the result pane, right-click Brian Cox, and then click Properties.

3. Click the E-mail Addresses tab, and then confirm that Brian has an e-mail address

for all three domains and Adatum.com is the primary (reply) address.

4. Click Cancel and then close the Exchange Management Console.

Exercise 2: Managing Address Lists

Task 1: Create an empty container mail list named Companies

1. On SYD-DC1, click Start, point to All Programs, click Microsoft Exchange

Server 2007, and then click Exchange Management Console.

2. In the console tree, expand Organization Configuration, click Mailbox, and then

click the Address Lists tab.

3. In the action pane, click New Address List.

4. In the Name box, type Companies.

5. In the Container box, accept the default value of \.

6. Under Include these recipient types, click None, and then click New.



Task 2: Create a new address list for Adventure Works in Companies



3. Click the Browse button, click Companies, and then click OK.

4. Under Include these recipient types, click All recipient types, and then click Next.

5. In the Step 1: Select condition(s) box, select Recipient is in a Company.

6. In the Step 2: Edit the condition(s) box, click specified.

7. In the Specify Company dialog box, type Adventure Works, click Add, and then

click OK.

8. Click Next.

9. Click Next to schedule this change Immediately.

10. Read the Configuration Summary, and then click New.


Task 3: Create a new address list for Alpine Ski House in Companies



3. Click the Browse button, click Companies, and then click OK.

4. Under Include these recipient types, click All recipient types, and then click Next.

5. In the Step 1: Select condition(s) box, select recipient is in a Company.

6. In the Step 2: Edit the condition(s) box, click specified.

7. In the Specify Company dialog box, type Alpine Ski House, click Add, and then

click OK.

8. Click Next.

9. Click Next to schedule this change Immediately.



12. Close the Exchange Management Console.


Task 4: Verify that the new address books are available in Microsoft

Office Outlook®

1. On SYD-CL1, log on as Administrator with a password of Pa$$w0rd.

2. Click Start, and then click E-mail.

3. Click the Tools menu, and then click Address Book.

4. Under Address Book, click the down arrow to display the options. You can see that

under All Address Lists, the Companies container is listed and it includes the

address lists Adventure Works and Alpine Ski House.

5. Close all open windows and log off SYD-CL1.

Task 5: Create a new offline address book for the Adventure Works and

Alpine Ski House address lists

1. On SYD-DC1, click Start, point to All Programs, click Microsoft Exchange

Server 2007, and then click Exchange Management Console.

2. If necessary, in the console tree, expand Organization Configuration, click

Mailbox, and then click the Offline Address Book tab.

3. In the action pane, click New Offline Address Book.

4. In the Name box, type Companies.

5. Click Browse, select SYD-DC1, and then click OK.

6. Clear the Include the default Global Address List check box.

7. Select Include the following address lists.

8. Click Add, expand Companies, click Adventure Works, and then click OK.

9. Click Add, expand Companies, click Alpine Ski House, and then click OK.

10. Click Next.

11. Select Enable public folder distribution and click Next.



14. Close the Exchange Management Console.


Exercise 3: Performing Recipient Bulk Management Tasks

Task 1: Add a header line to a .csv file

1. Click Start, point to All Programs, click Accessories, and then click Notepad.

2. Click the File menu, click Open.

3. Change the Files of Type to All Files.

4. Browse to D:\5047\Labfiles\Users.csv, and then click Open.

5. At the top of the file, replace Add Header Here with

FirstName,LastName,Password,Company. This header is used by the Import-CSV

cmdlet to name each column of imported information. These names then can be

referenced to view and manipulate information.

6. Click the File menu, and then click Save.

7. Close Notepad.

Task 2: Modify the CreateUsersLab.ps1 script to import Adventure Works

users from a .csv file

1. Click Start, point to All Programs, click Accessories, and then click Notepad.

2. Click the File menu, click Open.

3. Change the Files of Type to All Files.

4. Select D:\5047\Labfiles\CreateUsersLab.ps1, and then click Open.

5. In Section 1, define $db as SYD-DC1\Mailbox Database.

6. In Section 1, define $upndom as adatum.com.

7. In Section 1, define $ou as Adventureworks.

8. In Section 1, define $csvFile as D:\5047\Labfiles\Users.csv.

9. In Section 4, replace all instances of property1 with firstname.

10. In Section 4, replace all instances of property2 with lastname.

11. In Section 4, replace property3 with password.

12. Click the File menu, and then click Save.

13. Close Notepad.


Task 3: Run CreateUsers.msh to import Adventure Works users


then click Exchange Management Shell.

2. Type d:\5047\Labfiles\CreateUsersLab.ps1 and then press ENTER.

Task 4: Set the Company attribute for all users in the Adventureworks OU

Type Get-User -OrganizationalUnit “Adventureworks” | Set-User -Company

“Adventure Works” and then press ENTER.

Task 5: Define mailbox limits for all users in the Adventure Works

company

1. Type Get-Mailbox –OrganizationalUnit “Adventureworks” | Set-Mailbox

–IssueWarningQuota 50MB –ProhibitSendQuota 75MB and then press ENTER.

2. Close the Exchange Management Shell.

Task 6: Verify the configuration of Adventure Works users


then click Exchange Management Console.

2. If necessary, expand Recipient Configuration, and then click Mailbox.

3. Right-click Alice, and then click Properties.

4. On the General tab, confirm that:

• Alice is in the Adventureworks OU.

• Alice’s mailbox is on SYD-DC1\Mailbox Database.

• The alias for Alice is Alice.

5. Click the Organization tab and then confirm that the Company is configured as

Adventure Works.

6. Click Cancel and then close the Exchange Management Console.

5047B_LA05

Documents

Transcript of 5047B_LA05