500 Mw Turbo Generator
-
Upload
irina-atudorei -
Category
Documents
-
view
115 -
download
3
Transcript of 500 Mw Turbo Generator
![Page 1: 500 Mw Turbo Generator](https://reader031.fdocuments.us/reader031/viewer/2022012314/5455be9ab1af9ff7708b483a/html5/thumbnails/1.jpg)
500 MW TURBO GENERATOR
BHARAT HEAVY ELECTRICAL LIMITED
UNDER GUIDANCE OF Mr.J.K.PUNDIR
![Page 2: 500 Mw Turbo Generator](https://reader031.fdocuments.us/reader031/viewer/2022012314/5455be9ab1af9ff7708b483a/html5/thumbnails/2.jpg)
Turbo Generator• Def: It is a generator consisting of
steam or water turbines coupled to to an electric generator for production of electric power.
•EXCITER STATOR ROTOR WINDING
COREFRAME
![Page 3: 500 Mw Turbo Generator](https://reader031.fdocuments.us/reader031/viewer/2022012314/5455be9ab1af9ff7708b483a/html5/thumbnails/3.jpg)
It has following constructional features:
• Permanent magnets (Pilot exciter)
• Armature rotor (Main Exciter)
• Rectifiers (diodes)• Aluminum alloy
heat sink• Coupling bolts•
EXCITER
![Page 4: 500 Mw Turbo Generator](https://reader031.fdocuments.us/reader031/viewer/2022012314/5455be9ab1af9ff7708b483a/html5/thumbnails/4.jpg)
• It has the following constructional
features:– Made of 2 halves– Ventilation ducts– 3 man holes on both
sides– Water head– Bus– End Shields– Gear Terminal Box–
STATORFRAME
![Page 5: 500 Mw Turbo Generator](https://reader031.fdocuments.us/reader031/viewer/2022012314/5455be9ab1af9ff7708b483a/html5/thumbnails/5.jpg)
STATORCORE
– Built of Laminations (0.5 mm)– Staggered Layer– Hydraulic pressed and heated– Has cooling ducts in each part– Punching done to – accomodate windings–
–
It has the following constructional features:
![Page 6: 500 Mw Turbo Generator](https://reader031.fdocuments.us/reader031/viewer/2022012314/5455be9ab1af9ff7708b483a/html5/thumbnails/6.jpg)
ROTOR
• It has the following constructional features:
– Made after forging from vaccum cast steel ingot
– Longitudnal slots– Transverse Slots– Rotor wedges as damper winding– Cooling slots
![Page 7: 500 Mw Turbo Generator](https://reader031.fdocuments.us/reader031/viewer/2022012314/5455be9ab1af9ff7708b483a/html5/thumbnails/7.jpg)
• Process of making winding:– Conductors of definite
length– Conductors: hollow or
without cavity.– Stacked together– Silicon strips between the
conductors– Heated and insulation is
done– Insulation taken off from
ends– Transposition done at
proper distances–
WINDINGS
![Page 8: 500 Mw Turbo Generator](https://reader031.fdocuments.us/reader031/viewer/2022012314/5455be9ab1af9ff7708b483a/html5/thumbnails/8.jpg)
THANKTHANK YOUYOU!!!!