5 Easy Steps To Install Skirting Boards
10
5 Easy Steps To Install Skirting Boards
-
Upload
myronparker -
Category
Business
-
view
41 -
download
2
Transcript of 5 Easy Steps To Install Skirting Boards
5 Easy Steps To Install Skirting Boards
Skirting boards are created to cover the gap in between the bottom of the walls and that of your flooring. Its purpose is to
protect the wall's bottom area from any type of damage.
There are basically five easy steps to install skirting boards.
1. MEASURE
2. INSTALL
3. NAIL
4. TRIM
5. CAULK
Measuring the perimeter of the room is essential to know how many metres of skirting boards you will need in the entire project.
1. MEASURE
With the right measurement, you are now ready to install the boards. Make sure that you provide extra portions before laying
the skirt boards on the floor.
2. INSTALL
There are two ways by which you may nail the skirting boards to the wall studs. First, simply use an air nailer. Second, you may
use hammers and finished nails in the process.
3. NAIL
Again, you need to mitre the four corners of the board at 45 degrees. Trim the edges and corners until such time you get the
perfect fit for your skirting boards.
4. TRIM
This is a process that will help conceal the imperfections. Caulking is essential to seal the gaps between the skirting boards
and that of your walls.
5. CAULK
