47811-28-00 new u1 boxed version user manual• Ten-foot USB cable for flexible mic placement •...
Transcript of 47811-28-00 new u1 boxed version user manual• Ten-foot USB cable for flexible mic placement •...
Operation:
Polar Pattern & Frequency Response
Accessories:
Microphone clipTripod Stand
Thank you for purchasing the CAD Audio u1 USB microphone.
CADusb products bring high quality audio to your social media, gaming or home studio projects Creative control and limitless innovation await your beckon call as the result of CAD’s more than 80 years of professional audio expertise. Explore our CADusb series of products to unlock your creative edge and experience expression thru innovation.
Applications:
Studio Vocals, Speech, Instruments, Podcasts, Desktop Recording
Please read the manual carefully before using and keep it for further reference.
USB connector
Slide switch up, a red light will indicate that the microphone is connected and willflash while recording.
2
1. Connect the u1 to your device with the attached USB cable.
Slide the on/off switch to the on position. (switch up)
Installation:
CAD u1
Specs: u1
Operating Principle Dynamic CapsuleFrequency Response 80Hz – 16kHzPolar Pattern CardioidSensitivity -53dBV @ 1PaEncoding 16 bit resolution, 48K sampling rate
Windows and Macintosh compatible
• Dynamic microphone element designed for vocals and instruments• Cardioid pick-up pattern isolates the main sound source and minimizes background noise• Smooth, extended frequency response is excellent for singing, speech and instruments• Built in pop filter minimizes "P-popping"• On-Off switch for instant mute• Ten-foot USB cable for flexible mic placement• Desktop mic stand included
Features:
Assembly:
1. Unfold the legs of the tripod stand.
2. Attach the microphone clip to the tripod and then attach the microphone to the mic clip.
For Returns or Service visit cadaudio.com and click the Support tab.
CAD Audio 6573 Cochran RdSolon, Ohio 44139 CADAudio.com
Part # 47811-11-01 11-06-15 C.W.H.
Tripod Stand
2. Adjust your operating system and software settings for proper recording and playback:
Select the u1 as the recording device.
Select your default sound playback device.
(Note, mic is plug and play, no additional drivers are needed)
On/Off switch
Microphone clip
1
2
On/Off switch1
Refer to the installation page for instructionson setup.
The CAD u1 is compatible with most software.Simply choose a software product that suits your application and enjoy the benefits that the CAD u1 provides.