446234_DS
2
SHANGHAI SUNRISE ELECTRONICS CO., LTD. VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURES • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • Open junction chip,silastic passivated • High temperature soldering guaranteed: 260 o C/10sec/at terminal MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS SYMBOL M1 M2 M3 M4 M5 M6 M7 UNITS Maximum Repetitive Peak Reverse Voltage V RRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage V RMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage V DC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current (T L =100 o C) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current) Maximum DC Reverse Current T a =25 o C µA (at rated DC blocking voltage) T a =125 o C µA Typical Junction Capacitance (Note 1) C J pF Typical Thermal Resistance (Note 2) R θ (ja) o C/W Storage and Operation Junction Temperature T STG ,T J o C Note: 1.Measured at 1.0 MHz and applied voltage of 4.0V dc 2.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area http://www.sse-diode.com RECTIFIER SURFACE MOUNT M1 THRU M7 27 -65 to +150 I R 5.0 200 15 I FSM 30 A V F 1.1 V (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25 o C, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS I F(AV) 1.0 A TECHNICAL SPECIFICATION F D H G B A C I MAX. MIN. MAX. MIN. .035(0.88) .027(0.68) .008(0.203) .004(0.102) .030(0.76) .060(1.52) .208(5.28) .194(4.93) .078(1.98) .090(2.29) D .012(0.305) .006(0.152) E F G H I C .075(1.90) .052(1.32) A .110(2.79) .100(2.54) .157(3.99) .177(4.50) B DSMA/DO-214AC Dimensions in inches and (millimeters)
-
Upload
heriberto-flores-ampie -
Category
Documents
-
view
212 -
download
0
description
data
Transcript of 446234_DS
-
SHANGHAI SUNRISE ELECTRONICS CO., LTD.
VOLTAGE: 50 TO 1000V CURRENT: 1.0AFEATURES Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability Open junction chip,silastic passivated High temperature soldering guaranteed: 260oC/10sec/at terminal
MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-O recognized flame retardant epoxy Polarity: Color band denotes cathode
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SYMBOL M1 M2 M3 M4 M5 M6 M7 UNITS
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 VMaximum RMS Voltage VRMS 35 70 140 280 420 560 700 VMaximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 VMaximum Average Forward Rectified Current
(TL=100oC)
Peak Forward Surge Current (8.3ms singlehalf sine-wave superimposed on rated load)Maximum Instantaneous Forward Voltage(at rated forward current)Maximum DC Reverse Current Ta=25
oC A(at rated DC blocking voltage) Ta=125
oC ATypical Junction Capacitance (Note 1) CJ pFTypical Thermal Resistance (Note 2) R(ja) oC/WStorage and Operation Junction Temperature TSTG,TJ oCNote: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to terminal mounted on 55mm copper pad area
http://www.sse-diode.com
RECTIFIERSURFACE MOUNT
M1 THRU M7
27-65 to +150
IR5.020015
IFSM 30 A
VF 1.1 V
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load,derate current by 20%)
RATINGS
IF(AV) 1.0 A
TECHNICALSPECIFICATION
F
D
HG
B
A CI
MAX.MIN.
MAX.MIN.
.035(0.88)
.027(0.68).008(0.203).004(0.102) .030(0.76)
.060(1.52).208(5.28).194(4.93) .078(1.98)
.090(2.29)
D.012(0.305).006(0.152)
E F G H I
C.075(1.90).052(1.32)
A.110(2.79).100(2.54) .157(3.99)
.177(4.50)B
DSMA/DO-214AC
Dimensions in inches and (millimeters)
-
This datasheet has been downloaded from:
www.DatasheetCatalog.com
Datasheets for electronic components.
