42-YP Series Serie 42-YP Série 42-YP - Amazon S3 series... · 2009-04-06 · Remove excess...
Transcript of 42-YP Series Serie 42-YP Série 42-YP - Amazon S3 series... · 2009-04-06 · Remove excess...
A COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYCopyright © 2005, Price Pfi ster, Inc.© 2005, Price Pfi ster, Inc.©07-28-05 EO6852C 30022-0100
42-YP SeriesSerie 42-YPSérie 42-YP
Single Control Lavatory FaucetGrifo Monomando para el Baño
Mitigeur de Robinet pour Lavabo
ENGLI
SHEN
GLI
SHENGLISH
2
4
3
5
6
Thank you for purchasing this Price Pfi ster product. All Price Pfi ster products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238)
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price Pfi ster recommends calling a professional if you are uncertain about installing this product!This product should be installed in accordance with all local and state plumbing and building codes.
2 SHUT OFF WATER SUPPLYLocate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter. If you are replacing an existing faucet, remove the old faucet from the sink and clean the sink surface thoroughly.
3 TOOLS RECOMMENDED•Plumber's putty •Slotted screwdriver •Philips head screwdriver •Pliers •Adjustable wrench •Flashlight •Cloth •PTFE Plumber's Tape
Your installation may require new supply lines and / or shut-off valves or other additional tools.
4 CHECKING THE CONTENTS OF THE BOXUpon opening the box, check to ensure that all of the following items are included.
A Faucet D Base Plate G Metal Washer K Pop-up AssemblyB Lift Rod E Deckplate H Deckplate H Deckplate Long NutC Base Ring F Putty Plate J Adapters
If any of these items are missing, please contact Price Pfi ster Consumer Service at 1-800-Pfaucet (1-800-732-8238).
FAUCET INSTALLATION
5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTINGEnsure that Base Plate (5C) is pressed onto Base Ring (5A5A5 ). Place a bead of plumber’s putty in the groove along the bottom outer edge of Base Plate (5C). Assemble Base Plate and Base Ring to Faucet Body (5B). From above sink, insert Threaded Shank (5D) and Flexible Tubing (5E) through hole on sink.
6 INSTALLING FAUCET WITH DECKPLATEEnsure that the Plastic Putty Plate (6A) is pressed on the Deckplate (6B). Place a bead of plumber’s putty in the groove along the outer edge of the Putty Plate (6A). Assemble Deckplate (6B) and Putty Plate (6A) to Faucet Body (6C). With the handle and spout facing forward, carefully install the Faucet Supply Hoses (6D) through the center hole of sink (6E).6E).6E
2
B
A
E
D
C
5D
5B
5A
5C
5E
6A
6C
6D
6E
6B
F
G
HJ
K
ENGLISH
ENGLISH
ENGLISH7
8
9
10
11
7 SECURING FAUCETFrom underneath sink, secure Faucet Body (7A) by placing Metal Washer (7B) and threading Long Nut (7/16 Hex.) (7C) onto Mounting Post (7D). Make sure that the bumps on Metal Washer (7B) are facing up. Tighten loosely, make sure Handle (7E7E7 ) swings equally in both directions. Firmly hand tighten Long Nut (7C). Secure Long Nut (7C) not to exceed a 1/4 turn.Caution: Do not over tighten!
8 WATER SUPPLY CONNECTIONSIf needed, thread the ½” NPSM Adapters (8A) into the ⅝” Nuts (8B). Tighten using wrenches on both the Adapters and the Nuts. Connect water Supply Lines (8D) to Faucet Inlets (8C). Hot water supply line goes to hot inlet fi tting indicated by Red Tag (8E). (Supply lines not included). Follow manufacturer’s instructions when installing supply lines.
9 POP-UP ROD CONNECTIONInsert Lift Rod (9A) into hole at the back of Faucet Body (9B). Gently, slide Lift Rod (9A) down the hole in Faucet Body (9B).
10 POP-UP PREPARATIONRemove Flange (10A) from the Drain Body (10B). Remove Locknut (10C), Fric-tion Washer (10D), Rubber Washer (10E) and Stopper (10F) from Flange (10A).
11 POP-UP INSTALLATIONThe Flange (11A) can be installed with or without Rubber Seal (11B). If Flange (11A) is installed without Rubber Seal, apply a small bead of plumber’s putty underneath the Flange (11A) and around Drain Opening (11C). Insert Flange (11A) into Drain Opening (11C). From underneath, slide Rubber Washer (11D) and Friction Washer (11E) onto the bottom of Flange (11A). Thread Locknut (11F) until Rubber Washer (11D) seats securely inside Drain Opening (11C). Remove excess plumber’s putty. Wrap PTFE plumber’s tape to the bottom external threads of Flange (11A) according to manufacturer’s instructions. Thread Drain Body (11G) to bottom of Flange (11A) and adjust so that the Ball Rod Opening (11H) faces the rear.
DRAIN BODY INSTALLATION
3
7B
7C
7D
8B 8C
8A
8D
9A
9B
10D
10F
10E
10A10A
10B10C
11A
11B
11C
11D
11E
11F
11H
8E
11G
8A
7A7E
ENGLI
SHEN
GLI
SHENGLISH
12
13
14
15
16
12 BALL ROD PREPARATIONUnscrew Nut (12A) from the Drain Body (12B) and retain one Packing Ring (12C) inside the Ball Rod Opening (12D). Take off the Spring Clip (12E) from the Ball Rod (12F).
13 POP-UP BALL ROD INSTALLATIONDrop the Stopper (13A13A13 ) into Drain Body (13B) with the Off-Set (13C) facing the rear. Place Nut (13G) and the other Packing Ring (13H) onto Ball Rod (13D). Insert the Ball Rod (13D) into the Ball Rod Opening (13E) through the Stopper Hole (13F) and secure with Nut (13G).
14 POP-UP ROD LINKAGE & ADJUSTMENTPlace one end of Spring Clip (14A) onto the end of Ball Rod (14B). Insert the Ball Rod (14B) through a hole of Strap (14C). Connect the other end of Spring Clip (14A) to Ball rod (14B). Insert bottom of Lift Rod (14D) into the hole on top of Strap (14C). Adjust the Lift Rod (14D) height by tightening the Thumb Screw (14E) on the Strap (14C) or by placing the Ball Rod (14B) on another hole of Strap (14C). Be sure to leave enough space between Lift Rod Knob (14F) and Faucet Body (14G) when Lift Rod is down.
15 UNIT START UPTurn on hot and cold water supplies, and check for leaks above and below the sink.
FAUCET FUNCTION
16 VALVE FUNCTIONBy lifting the Lever Handle (16A) up, the valve will be activated allowing water to fl ow. The water fl ow will increase by continuing to lift up the Lever Handle (16A). By rotating the Lever Handle counter-clockwise, the water temperature will decrease to cold fl ow only. By rotating the Lever Handle clockwise, the water temperature will increased to hot fl ow only. 4
14B 14E
16A16A
12C
12F
12A12A
12B
12E
12D
13A13A
13B13C
13D
13F
13E
13D
13G
14C
14D
14A14A 14B
14A14A
14F
14G
13H
14C
16A16A
OPEN
HOT COLD
ENGLISH
ENGLISH
ENGLISH
1718MAINTENANCE & CARE
17 HANDLE REMOVALUsing a 3/32” Allen wrench, loosen Set Screw (17A) and remove Handle (17B).
18 CARTRIDGE REPLACEMENTTurn off water supplies and relieve pressure before working on your faucet. Remove handle (see fi gure 17). Remove the Dome Cap (18A8A8 ) by unscrewing counterclockwise. Using pliers, unscrew the retainer ring (18B). Carefully remove the Cartridge (18C) by pulling it straight up and out. Reassemble valve by reversing steps.
CAUTION: MaintenanceDISASSEMBLY1. Replacement parts may be available at the store where you purchased
your faucet.2. When replacement parts are not available, please write or call Price
Pfi ster Consumer Service.3. Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim CareCleaning Instructions:For all Handles and decorative fi nishes, use only a soft damp cloth to clean and shine. Use of polish, detergents, abrasive cleaners, organic solvents or acid may cause damage. Use of other than a soft damp cloth will nullify our warranty!Special Trim: Trim products which contain Porcelain or other similar substance are not acceptable for public areas or Commercial use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call 1–800–PFAUCET (1–800–732–8238) or visit www.pricepfi ster.com
• Installation Support• Care and Warranty Information
5
17B17A17A
18A18A
18B
18C
19701 DaVinciLake Forest, CA 92610Phone: 1-800-Pfaucetwww.pricepfi ster.com
A COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANYA COMPANY
42-YP
** Letter Designates FinishLetter Designates Finish La Letra Indica el TerminadoLa Letra Indica el Terminado La Lettre Designe La FiniLa Lettre Designe La Fini
A Polished Chrome Cromo Pulido Chrome PoliE Rustic Pewter Peltre Rústico Étain RustiqueJ PVD Brushed Nickel PVD Niquel Cepillado PVD Nickel BrosseU Rustic Bronze Bronce Rústico Bronze RustiqueZ Oil Rubbed Bronze Bronce Frotado Con Aceite Bronze Huilé
941-770*
941-750*
931-900
974-035
971-130
961-041*
961-042*
962-001
940-780*
972-030*
970-220
972-031*