SIROCCO

SIROCCO

SIROCCO is a family of floodlight, surface washer and area lighting. Three (3) types of light distribution, asymmetric, bi-symmetric, and road optic. Available in 2 sizes with a range of mounting accessories including ground mount base, pole top mount, and wall/pole mounting arm. SIROCCO is designed to be operated with Metal Halide and High Pressure Sodium lamps from 70W to 400W and also with the high lumen output LED light source. A version of Cosmopolis White lamp from Philips with integrated electronic control gear is also available.

Reflectors for SIROCCO have been engineered utilizing the latest technology and software for maximum performance. A calibrated aiming unit provides accuracy of light distribution on any surface or structure. SIROCCO is suitable to illuminate medium to large size objects or areas such as signage boards, building facades, parking lots, public parks, pedestrian, small streets and squares. The burning position of the lamp used in this luminaire must be observed. Galvanized steel pole and anchor unit for concrete foundation are also available.

Robust high-pressure diecast aluminium housing.

Timed ignitor.

Computer aided design reflector.

ZHAGA compliance LED module.

Choices of light distribution.

Double layer coating.

Graduated scale for accurate aiming.

Available in 6 colors.

408408

SIROCCO

• Vacuum impregnated magnetic ballast for HID lamp from Vossloh Schwabe/ BAG Electronics or equivalents. ENEC approved.

Aluminium case capacitor with over pressure safety device from Italfarad or equivalents. ENEC approved.

Electronic ignitor with automatic switch-off function from Vossloh Schwabe or equivalents. ENEC approved.

• Electronic ballast for HID lamp from Philips or equivalents. ENEC approved.• High efficiency LED module utilized Philips Lumiled / Osram Semi

conductor chips. Assembled on MCPCB and mounted on to heat conductive material.

High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard. Driver is integrated in the luminaire. The whole systems tested to be operated under maximum ambient

environment up to +40°C.• Tinned copper conductor with silicone insulated internal wire

from ENCO or equivalents. IMQ approved. Working temperature -40°C to +180°C.

HID control gear wired with double insulated silicone cable and compatible to be operated under ignition voltage up to 5KV.

• Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm2. VDE approved.

Class1 luminaire provided with the earth connection.• Installation work has to be carried on according to the enclosed

installation manual.

Available Color

Black (replace the last 2 digits of ordering code with 01)Graphite (replace the last 2 digits of ordering code with 02)Dark Grey (replace the last 2 digits of ordering code with 03)Aluminium Silver (replace the last 2 digits of ordering code with 04)Smooth Silver (replace the last 2 digits of ordering code with 05)White (replace the last 2 digits of ordering code with 06)

Specification

• Fixture is manufactured in compliance with international standard of general requirement IEC 60598-1 and fixed general purpose luminaires IEC 60598-2-1. Electrical protection class1.

Protection against dust and water IP65. Protection against mechanical impact IK08 on body and IK07 optical part. • High-pressure Die Cast Aluminium alloy body and components. Extruded Aluminium S6063 alloy body with low copper content. High Strength Cast Aluminium alloy component.• Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top

coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C.

• Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.

• High performance CNC forming aluminium reflector sheet from Alanod – Germany. High efficiency engineering designed Deep-Draw forming reflector

for Road Optic distribution.• Adjustable aiming unit through graduated scale.• Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.• External screws are in stainless steel with protection dipping.• Surface washer cable entry protected by weather proof EPDM

grommet and to be used with H05RN-F/ H07RN-F cable with 7-10mm. diameter.

Small Floodlight cable entry protected by M16 cable gland from Lapp Kabel. To be used with H05RN-F/ H07RN-F cable with 5-10mm. diameter.

Medium Floodlight cable entry protected by M20 cable gland from Lapp Kabel. To be used with H05RN-F/ H07RN-F cable with 7-13mm. diameter.

• E40 lampholder in ceramic body from Vossloh Schwabe or equivalents. VDE/ ENEC approved. Fc2 lampholder in ceramic body from Vossloh Schwabe or equivalents. VDE/ ENEC approved. RX7s/ RX7s-24 in ceramic body from EMC Colosio or equivalents.

IMQ/ ENEC approved. G12 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved. G22 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved. PGZ12 in diecast aluminium and ceramic body from EMC Colosio or

equivalents. IMQ/ ENEC approved.

Extruded aluminium pole û105mm. with fuse(see detail on page 488)

Mounting base (for flood light) for ground mountingOrdering code: 9-0200-XX

Galvanized Steel Pole û102mm. with fuse(see detail on page 491)

Pole top mount adaptor (for flood light) – spigot size 76mm.Ordering code: 9-0212-XX

Galvanized Steel Pole û114mm. with fuse(see detail on page 494 & 495)

Wall / Pole mounting arm (for flood light)Ordering code: 9-0220-XX

Anchor bolt kit for concrete foundation installing.(see detail on page 488, 491, 494 & 495)Ordering code: 9-2020-00 for aluminium pole û105mm. 9-2023-00 for steel pole û102mm. 9-2024-00 for steel pole û114mm.

Accessories

409

Product Image

Dimension

Light Distribution

SIROCCO

Project Data

Project :

Location :

Date :

Note :

Product Name : Small SIROCCO Area Light / Asymmetric Single Sided

Ordering Code : 7240-1-3-731-XX

Lamp Type : HIT-DE-CE RX7s 70W 6500lm

Protection : IP65 Class1t

Specification

• Fixtureismanufacturedincompliancewithinternationalstandard ofgeneralrequirementIEC60598-1andfixedgeneralpurpose luminairesIEC60598-2-1.Electricalprotectionclass1.Protection againstdustandwaterIP65.Protectionagainstmechanicalimpact IK08 on body and IK07 optical part. • Luminairebodyhousingandcomponentsmadeofhigh-pressuredie castaluminiumalloywithlowcoppercontent.Groundbracketmade ofcoatedgalvanizedsteel.Corrosionresistanceandsuitablefor outdooruse. • NanoCeramicsurfaceconversion,resistanttocorrosiveenvironment. LuminiareprimarilycoatedwithepoxyresinandtopcoatedwithUV stabilizedpolyesterpowderandcuredindigitaltemperature controlled chamber at 200°C. • Impactresistantsafetytemperedglasscover.Abletowithstandthe temperatureupto250°C. • Foldedreflectormadeofhighpurityanodizedsheetaluminiumfrom Alanod. • Engineerdesigneddeep-drawfoamingreflector. • Post-curedtreatedsiliconegasket.Temperatureandweather resistant.Workingtemperature-40°Cto+200°C. • Externalscrewsinstainlesssteelwithsiliconegreasedipping. • CableentryprotectedbybrassnickelcableglandorPG11 synthesizedrubbergrommet.PrepareforH05RN-F/H07RN-Fcable diameter 7 – 10mm. • RX7slampholdersinsteatitebodywithelectrolyticsilvercontact fromEMCColosio-Italy/ENECapproved.Fordischargelampand halogenlamp.T250rating6/1000/5KV. • TerminalblockinPA6.6nickelplatedbrassinsert600V/24A–VDE approved.Workingtemperature-40°Cto+130°C.Forcablewith crosssectionupto2.5mm2.Wiringprovidedwithearthconnection.

Available Color

Black (replacethelast2digitsoforderingcodewith01)Graphite (replacethelast2digitsoforderingcodewith02)DarkGrey (replacethelast2digitsoforderingcodewith03)AluminiumSilver (replacethelast2digitsoforderingcodewith04)SmoothSilver (replacethelast2digitsoforderingcodewith05)White (replacethelast2digitsoforderingcodewith06)

SIROCCOProduct name: Small SIROCCO - Area Light / Asymmetric Single Sided

Ordering Code: 7240-1-3-907-XX

Lamp Type: LED

Protection: IP65 Class I

Specification:

IEC Standard: IEC 60598-1 General Requirement

IEC 60598-2-1 Fixed Luminaires

IK Rating: Protection against mechanical impact IK08 on body and IK07 optical part.

Luminaires Body Housing: High-pressure Die Cast Aluminium alloy body and components.

Extruded Aluminium S6063 alloy body with low copper content.

N/A

N/A

Coating Process: Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilizedpolyester powder and cured in digital temperature controlled chamber at 200°C.

Diffuser: Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.

N/A

Reflector: High performance CNC forming aluminium reflector sheet from Alanod – Germany.

Lens: N/A

Adjustable Optic: Adjustable aiming unit through graduated scale.

Gasket: Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.

External Screws: External screws are in stainless steel with protection dipping.

Cable Entry: N/A

Lamp Holder: N/A

Ballast: N/A

Capacitor: N/A

Ignitor: N/A

LED: High efficiency LED module utilized Philips Lumiled chips. Assembled on MCPCB and mounted on to heat conductive material.

Driver: High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard.

Internal Wire: Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40°C to +180°C.

Terminal Block/Connector: Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm2. VDE approved.

Pre-wired Cable: N/A

Caution: Installation work has to be carried on according to the enclosed installation manual.

N/A

N/A

6000 lmN/A 54 W Asymmetric 4000 K

The whole systems tested to be operated under maximum ambient environment up to +40°C.

Class1 luminaire provided with the earth connection.

N/A

Product Image

Dimension

Light Distribution

Project Data

Project :

Location :

Date :

Note :

Product Name : Small SIROCCO Area Light / Asymmetric Single Sided

Ordering Code : 7240-1-3-907-XX

Lamp Type :

Protection :