Common Rookie Blunders Kelvin Lin Team 4001 Programmer Yoan Holder Team 4001 Electrician.
4001 Collins Lane, Louisville, KY. 40245 LARGE SCALE WASTE ... · 4001 Collins Lane, Louisville,...
Transcript of 4001 Collins Lane, Louisville, KY. 40245 LARGE SCALE WASTE ... · 4001 Collins Lane, Louisville,...
LARGE SCALE WASTE SOLUTIONS
Falls City Industrial Solutions (FCIS) is a Kentucky based manufacturer of waste and recycling equipment for collecting, processing and transportingrecyclables and solid or liquid waste. Specifications subject to improvement without notice. Equipment displayed should be operated by properlytrained personnel. Photos used in the literature are illustrative only. We reserve the right to make changes at any time without notice. Informationcontained within this literature is intended to be the most accurate available at time of printing. Operators should become familiar with OSHA, ANSIand any other applicable standards or laws for using this equipment. Improper use, misuse, or lack of maintenance could cause injury to peopleand/or property. Train your people so they know what they are doing and can operate equipment safely and efficiently.
www.fallscityis.com [email protected] 502 656 3255
502 656-32554001 Collins Lane, Louisville, KY. 40245
Falls City has a roll off solution to meet all of your waste needs. FCIS offers rectangle roll offs in three configurations (light duty, standard duty and heavy duty) and tub style roll offs in two configurations (standard duty and heavy duty). All of our roll offs meet ANSI specifications and are engineered with the customer in mind.
JOBBER STANDARD HEAVY DUTYOur Jobber containers are designed and built for the landscaping
industries and for residential clean out projects. These containers are popular among companies that have a limited lift capacity hoist.
Typically they haul light debris such as mulch, wood waste (such as chips and saw dust), tree limbs, grass, leaves and garbageJobber
containers are an option for those haulers whose needs do not require the Standard Duty container.
Standard duty containers are designed and built for the construction and demolition industries. These containers can be used on both Residential and Commercial job sites to haul a variety of material
ranging from yard waste and roofing materials to light scrap iron and concrete. Our Standard Duty containers can easily withstand the
abuse and loading procedures that you typically see on the construction site such as excavators, backhoes, skid loaders and
grapples.
Heavy Duty containers are designed and built for the heay hauling and scrap metal processing industries. These containers are built to hold
up under the most extreme loading procedures that are typically found in these environments. They take the pounding associated with the hauling and removal of large, heavy and abrasive materials from the
demolition site such as large pieces of concrete, large rocks & structural steel. Heavy Duty containers are built with longevity in mind and can make everyday heavy hauling operations run more smoothly
and ensure years of service.
PLATFORM: PLATFORM: PLATFORM:3/16" floor sheets 3/16” floor sheets 1/4” floor sheets
20” centered crossmembers 16” centered crossmembers 12” centered crossmembers
6” x 2” x 3/16” tube main rails 6” x 2” x 3/16” tube main rails 6” x 2” x 1/4” tube main rails
8” x 10” rear ground rollers with zerk 8” x 10” rear ground rollers with zerk 8” x 10” rear ground rollers with zerk
Optional front ground wheels 8” x 6” front ground rollers with zerk 8” x 6” front ground rollers with zerk
4” x 6” solid steel nose rollers with zerk 4” x 6” solid steel nose rollers with zerk 4” x 6” solid steel nose rollers with zerk
3/4” hook plate 3/4” hook plate 1” hook plate
1 3/8” hook & bull nose 1 3/8” hook & bull nose 1 3/8” hook & bull nose
1/2” nose roller brackets 5/8” nose roller brackets 5/8” nose roller brackets
WALLS: WALLS: WALLS:12 GA sheets 12 GA sheets 7 GA sheets
12 ga. post on 30” centers 12 ga. post on 24” centers 10 ga. post on 24” centers
6" x 2" x 10GA rear tailgate post 6" x 2" x 3/16” rear tailgate post 8" x 2" x 3/16” rear tailgate post
4” x 3” x 1/8” tube top rail 4” x 4” x 3/16” tube top rail 4” x 4” x 3/16” tube top rail
1/2" solid round bar tarp rail (30” down) 5/8” solid round bar tarp rail (30” down) 5/8” solid round bar tarp rail (30” down)
Uplift latch system Uplift latch system Uplift latch system
BULKHEAD BULKHEAD BULKHEAD12 ga. Sheet w/4” x 3” x 1/8” tube top rail & 12 ga. front post 10 ga. Sheet w/4” x 4” x 3/16” tube top rail & 12 ga. front post 3/16” Sheet w/4” x 4” x 3/16” tube top rail & 10 ga. front post
3/16” push plate and 10 GA dog house 3/16” push plate and dog house 3/16” push plate and dog house
TAILGATE TAILGATE TAILGATE12 ga. tailgate 10 ga. tailgate 3/16” tailgate
4” x 3” x 1/8” tube vertical supports; 12GA cross post 4” x 3” x 1/8” tube vertical supports; 10GA cross post 4” x 3” x 3/16” tube vertical supports; 10GA cross post
1/2” hinge plate with 1 1/4” hinge pins 5/8” hinge plate with 1 1/2” hinge pins 5/8” hinge plate with 1 1/2” hinge pins
PAINT PAINT PAINTWater based industry enamel Water based industry enamel Water based industrial enamel
All containers are painted gray on the bottom and the interior. All containers are painted gray on the bottom and the interior. All containers are painted gray on the bottom and the interior.
Painted one (1) standard color of choice Painted one (1) standard color of choice Painted one (1) standard color of choice
RECTANGLE STYLE ROLL OFFS STANDARD SIZES5 YD
10 YD20 YD30 YD40 YD
CUSTOM SIZES
AVAILABLE UPON
REQUEST
Falls City’s Tub Style roll offs come in a multitude of configurations, from 5 yardto 40 yard. We can customize a Tub to fit any application. Tub Style roll offs arenestable which reduces freight costs and decreases storage space. Speak with asalesperson today to discuss your needs and how Falls City can help you reachyour goals.
Standard Duty Tub Style roll offs are perfect for light constructionand remodeling, landscaping, and industrial or residential clean-up.Heavy Duty models are available for construction, demolition andscrap metal applications.
TUB STYLE ROLL OFFSSTANDARD DUTY
Standard Duty Tub containers are designed and built for leightweight waste products. These containers can be used on both Residential and
Commercial job sites to haul a variety of material ranging from yard waste and roofing materials to light scrap iron and home imporovement
projects. Our Standard Duty Tub containers are ideal for do-it-yourselfers and small businesses.
PLATFORM:3/16” floor sheets
16” centered crossmembers6” x 2” x 1/4” tube main rails
8” x 10” rear ground rollers with zerk8” x 6” front ground rollers with zerk
4” x 6” solid steel nose rollers with zerk3/4” hook plate
1 3/8” hook & bull nose1/2” nose roller brackets
WALLS:10 ga. Sheets
3/16” rear tailgate post4” x 4” x 3/16” tube top rail5/8” solid round bar tarp rail
Uplift latch systemBULKHEAD
10 ga. Sheet w/4” x 4” x 3/16” tube top rail & 12 ga. front post10GA push plate and dog house
TAILGATE10 ga. tailgate
4” x 3” x 1/8” tube vertical supports; 12GA cross post1/2” hinge plate with 1 1/4” hinge pins
PAINTWater based industry enamel
All containers are painted gray on the bottom and the interior.Painted one (1) standard color of choice
HEAVY DUTYHeavy Duty Tub containers are designed and built for applications that will see hevier, more abrasive materials. These containers are built to hold up under the more extreme loading procedures. They
take the pounding associated with the hauling and removal of large, heavy and abrasive materials from the demolition site such as large
pieces of concrete, large rocks & structural steel. Heavy Duty containers are built with longevity in mind and can make everyday heavy hauling operations run more smoothly and ensure years of
service.
PLATFORM:1/4” floor sheets
12” centered crossmembers6” x 2” x 1/4” tube main rails
8” x 10” rear ground rollers with zerk8” x 6” front ground rollers with zerk
4” x 6” solid steel nose rollers with zerk1” hook plate
1 3/8” hook & bull nose5/8” nose roller brackets
WALLS:3/16” sheets
8" x 2" x 3/16” rear tailgate post4” x 3” x 3/16” tube top rail5/8” solid round bar tarp rail
Uplift latch systemBULKHEAD
3/16” Sheet w/4” x 4” x 3/16” tube top rail & 10 ga. front post3/16” push plate and dog house
TAILGATE3/16” tailgate
4” x 3” x 3/16” tube vertical supports; 10GA cross post5/8” hinge plate with 1 1/2” hinge pins
PAINTWater based industrial enamel
All containers are painted gray on the bottom and the interior.Painted one (1) standard color of choice
RECTANGULAR STYLE ROLL OFF TUB STYLE ROLL OFF
A 263"B 84"C 93"D 53", 73" or 95"E 276"F 42", 62" or 84"
A 84"B 263"C 90"D 100"E 53", 73" or 95"F 278"G 42", 62" or 84"