400 Hz Aircraft Connectors - Riga International Airport · 400 Hz Aircraft Connectors 400 XP-2 / 4...
Transcript of 400 Hz Aircraft Connectors - Riga International Airport · 400 Hz Aircraft Connectors 400 XP-2 / 4...
400 HzAircraft Connectors
400 XP-2 / 4
400 XPS
400 XP / XPV
Cavotec Fladung has always designed and developed high quality ground support equipment, aimed at servicing the aircraft as fast and safe as possible. This uncompromising stance on safety, reliability and innovation has made Cavotec Fladung the preferred partner of industry operators around the world.
Cavotec Fladung offers a complete range of 400 Hz aircraft connectors.
• 400 XP: standard model with replaceable contacts
• 400 XPS: basic model with short front part and fixed contacts
• 400 XPV: military version, VG-certified (German defense equipment standard)
• Resistant to UV radiation, oil, hydrolysis and microbial attack
MODELS WITHOUT CONTROL BUTTONS
• 400 XP-2: 2 control buttons, 400 Hz supply ON/OFF
• 400 XP-4: 4 control buttons, 400 Hz supply ON/OFF and cable coiler IN/OUT
MODELS WITH CONTROL BUTTONS
• Material for housing: crosslinked thermoplast, highly abrasion and chemical resistant, operating temperature range -65°C to +125°C (-85°F to +257°F)
• Replaceable contacts, silver-plated copper-tellurium alloy (contacts for 400 XPS only replaceable with long front part upgrade)
• Replaceable connector housing and front part
• All contacts sealed with water proof resin
• Protection class: IP67
• Applicable norms: VG 95319, ISO 461 and MIL-C-7974D, MS 25486
• Mates to Mil Spec MS90362 receptacle
• Push and pull forces meet DIN EN 61984 ≤ 445 N
FEATURES
*military version, VG-certified
**If converting to the long connector housing, replaceable longer contact pins are required. Note that conversion is only possible from short to long, not from long to short.
www.cavotec.com
• Micro switch: signals contact closed when connector at least 80% engaged, ensures voltage is applied only when proper mechanical connection is established
• LEDs: show connection status
• Control buttons: let operator control 400 Hz supply and cable coiler directly at connector
• Temperature sensors: detects overheating in contacts A, B and C
• Custom models available upon request
OPTIONAL FEATURES
AVAILABLE MODELS
Connector Buttons Micro LED Temp. Nose configuration Replaceable Cable version swith sensors contacts types on/off in/out long short 400 XP 0 – 2 0 – 2 optional x yes all 400 XP-2 x 0 – 2 0 – 6 optional x yes all 400 XP-4 x x 0 – 2 0 – 6 optional x yes all 400 XPS 0 – 2 0 – 2 optional x** no** all 400 XPV* 2 0 optional x yes all
6
3
5
82
7
1
4
1 Connector front part
2 Replaceable silver plated contacts
3 Contact holder
4 Circlip
5 Fixed silver plated contacts
6 Connector half housing
7 Metal sleeve
8 Optional micro switch
Nominal voltage: 115/200 V, 400 Hz
Current carrying capacity: 260 A / 90 kVA
Current overload: 700 A / 3 min
Test voltage: 4 kV
Micro switch: max. 30 V DC, 100 mA
ELECTRICAL CHARACTERISTICS
ASSEMBLY DRAWING